This looks almost identical to my HS210 and this video is 7 years old! Can't wait to be able to afford a real whoop one day but these toy quads are amazing for getting folks into the hobby like myself.
I just started FPV last week and have been very amazed by all your straight forward reviews! This is the first time I am watching you fly so slow! Great video as always.
@@NickBurnsFPV haha it has! Lol you have gotten waayyyy more comfortable with the camera too. Thanks for all the content man, seriously. You’ve helped me get into FPV big time and I feel like I can’t thank you enough! If you ever have time to see my whoop videos on my channel, you can see the inspiration 😝
@@avasianfpv Holy Catfish!!! I just watched your 5inch in the basement flight. Great control, and guts to boot. Mobula rip was equally great. Your really good. Thank you for sharing.
micro losi batteries fit on these connectors. You have to cut the little nibs of plastic on the losi and it will fit right in. Also you can solder a second connector on the flight controller. You solder it on the top on the fc and dont remove the original one. They both will work.
great video. I just bought one on the strength of watching this then started reading the comments and decided to buy another one! Much respect for taking so much time out to respond to all questions. You do a great job. (btw, just getting into fpv too so all info was covered and very useful) Thanks!
Only flew my E010 once....... Before slapping a cam on it ! :) I used one of the Eachine EF-01 all in ones (Because I had it handy) and I'm amazed that those tiny motors can still get that lot off the ground. I've ordered a few better (200mAh) cells and some Chaoli CL-615 motors to try to get back some of the limited punch this little quad had...... I just hope the board can take the extra current these'll pull through it (Ordered a spare just in case. :) ). As stock (For the money) These are an amazingly good little quad. I'm blown away with mine.
Just the ones branded as "Eachine 3.7V 200mah 30C Lipo Upgrade Battery for Blade Inductrix" on BangGood. God knows if they're any good, But the folks reviewing them seem to like 'um, So we'll see. I'm going to have to trim the end of the battery holder on the E010, de-solder the power plug and reconnect it on a couple of short wires to get these cells to fit , But that shouldn't be an issue. Apart from this and the motors, I doubt I'll upgrade much else on my "Cheapskate whoop" as I've also got a QX90 (And some blade guards) coming soon to cater for my indoor FPV amusement needs. :)
I like the name "Cheapskate whoop". Have you tried the 205mah or 175 mylipos? www.mylipo.us/Lipo-205mAh-37V-1S-25C-50C They are what I use. They also have a warehouse at mylipo.de
I'd never even heard of them before you linked to their site. But as I said, I've already ordered the BangGood ones, and don't intend to spend much more on the E010. It was really only ment to be a stop gap while waiting for the QX90 to come back into stock, But I REALLY wasn't expecting it to be as good as it is. Part of the reason for going for the QX90 was because I've already got a metric shedload of suitable cells to use on it. I used to be heavily into E-Cigs, And made several chunky multi LiPo based "Box mods" for people, That was before the market caught up and suddenly you couldn't move for high powered devices. Despite trying to use them on everything I can (My backup FS i6 TX now runs a parallel pair, And even my old beard trimmer's had the pathetic little set of duff Ni-Mh cells replaced with a single LiPo and 5V charging board...... From 2.4 to 4.2V..... It goes like the clappers now ! LOL !) I still have a big LiPo safe bag full of these little Turnigy nano-tech cells. I've saved the link to my browser and if I need any cells in the future I'll have another look to compare prices.
sounds like your set for batteries for awhile. If you want to explore you might also consider micro-motor-warehouse.com/collections/batteries/products/mylipo-480mah-40c-1s-battery-3-7v Its the best battery I have tried on micros. I have fallen out of favor with HK 1S batteries.
I would like to be more of this kind of quads , small and with ducted props. Brushless engine would be great . From my beginner experience a good quad to learn is a very small one and with protected props like this one. I think with this beginners can learn faster, you can risk more when fly than with a big one, if crush no demage And you can fly indoors.
awesome Nick. Thanks for the review. I couldn't decide between red and green so I ordered both. still waiting for them. I plan on modding the battery for sure. I'd like to get a 380mah in it, we will see.
I would calculate the x mah against x gram to find the tipping point between mah and weight. two is good. I tend to "rest" my brushed quads between flights. Not sure its needed or not, gives me piece of mind.
+Nick Burns I will have to look up the ratio of weight to mah. I'm not sure what it is. I fly 5 batteries one right after he other through my micro brushed quads haven't burnt a motor yet. I have a dromida vista that burnt motors after very little flight and the replacements were crap too. I won't buy dromida again.
Great video sir! I have a couple of these on the way. I guess i need to prder up some spintechs. Yeah it looks like modding the battery connector is easy peasy if you solder. It looks from here like you could simply solder the connector on the top side, or replace it with whichever connector suits. I'm going try my hand at FPVing it too. I guess many of us are there or are headed there. I also look forward to flying these with my Devo Awesome flight!
Uses same battery connector as Blade QX 3D and WLtoys V911, I have both of those but the batteries all have the connector attach to the battery with no lead, looks like best option will be to solider a connector with lead, I see no reason to remove the old connector, just solider on other side of board , but then again as you said stock batteries are cheap
yep. I did add a led to the top and left the original in place here. th-cam.com/video/0IFja3D7_UUS/w-d-xo.htmleemed to be logical to leave the original connector in place. Its not in the way of the batteries or anything.
scisky won't fit natively, the corners stick out about 4mm. The stock inductrix board will fit, so the bee brain should fit too. There are actually mounting holes for the stock inductrix and bee brain. Stock board dimensions: nose is 6mm the middle is 22mm and tail is 8.5mm. The gaps are consistent, but the board measurement front and back are different.
hii How long the engines lasts ???? How many flights??? this are brushed engines , so tiny that can't be repaired. I had the Sima x4 I liked the quad but the engines had very short life only a few flights ( 8 - 10 flights ) Brushless is much much better, much longer life span.
True, brushless tend to run longer. There are many variables in motor life, flight style, motor impacts, severity of impacts etc. In the case of my brushed micros the number of flights hasn't been short enough to remember the flight count. I would estimate 40+ flights.
Thanks for your replay Perhaps the engines to syma x4 is bad or because I was very beginer and I crushed many times. I changed the engines a few times and the same. An engine that is brushed( have some tiny wires that touch the collector at very high RPM ) will not last long. Brushless are better by far in my opinion. I like alot the quad E010 and hope thy will make a brushless version.
LOL... the battery connector that comes on this quad is the same as the "High-Performance Upgrade" or "PowerWhoop" connector. Folks pay $3-6 to upgrade to this connector so they can use better batteries and not be saddled with the stock NanoQX power connector which is a POS and causes premature LVC. This Quad is available now for $13.99... as a cheap buildup with a NQX FC or aftermarket FuriBee/F3 Brushed FC, plus it comes with 2X props, battery and free upgrade parts... it's a no-brainer, man. That is if you can stop yourself from leaving it stock and just throwing it in your dufflebag for a quickie at lunchtime. :p
The controller is very small and would work better for young children. I wouldn't suggest flying this outside if there is much wind, its very difficult for novice flyers to control it in wind.
way better than expected. if the protocol is deviated, it will be sweet! if you want JST, just solder it to top of FC? i think mCPX can handle slightly higher amperage than jst. or at least, it is not as fast to wear out..
oh, I had always thought jst delivered more juice? That is a good point on soldering to the top. Now we either mod the battery bay or wait for better batteries that fit.
Yes the one we call eachine E010 was originaly the jjrc h36 :D Then eachine add some level : the E011 : whith instead of the useless plastic piece thas is used as a canopy, they put a lego one, and sell it with a knight or santa the E013 : with a fpv camera pre-installed, and as an option cheap FPV googles. For me it's the best variation of the goog old H36 :p www.banggood.com/Eachine-E013-Micro-FPV-Racing-Quadcopter-With-5_8G-1000TVL-40CH-Camera-VR006-VR-006-3-Inch-Goggles-p-1182628.html?p=PB110915063962201710
Wow! This video brings back some memories for sure. It's amazing how quickly this hobby is progressing. You've always been an inspiring pilot. Even back then. I have one question. I remember when you first flew through your treadmill and I nearly jumped out of my chair with excitement! Now you zip through it with ease every time you fly indoors. Is that the same treadmill? Is it just an expensive and nostalgic race gate or does somebody actually use it for it's intended purposes? I know it's a stupid question but I'm just curious.
We have had two treadmills. Most recently the treadmill is used by my wife in the colder months and my two oldest kids. My running days are over, but I will likely use it for getting some extra steps. :)
buy an FX798Tbit.ly/2gbV4Gp or another super light micro camera vtx combo and solder the red and black wires to the same spots on the board where the battery goes.
Question: If I get two of these (so my son and I can fly alongside in the living room), would they work or would we have interference issues with the signals and the controllers? Thanks for your answer.
Great review mate and thanks. Just waiting for mine to show up now but have a question regarding the props, Do you think they are exactly the same as the whoop props? have you tried swapping them out and tried on the Inductrix?
Hi nick your video is amazing - Thanks for the efforts. Is there a video for the FPV setup - what googles do you use for the FPV & what video transmitter.
The camera and vtx combo I used is the fx798T linked in the description. I didn't do a review, when I got mine there were many reviews already. My primary goggles are the KDS kylin vision googles. They have also been rebranded to jjrc. I did a mod to them to add the dvr function in this video. th-cam.com/video/iDLrw_hIvfE/w-d-xo.html
What fpv goggles are you using? I'm looking for a good beginner option but I've flown for years. Just never fpv.... So I'm ok spending a little more on something that will last me a while. Not really interested in racing... Just a solid fpv device.
The market is really split into halves. the $100 or sub $100 and the $500 market. Now having used the FatShark HD3 goggles for a few weeks, I don't think I would purchase again. Especially as I have to send them back to get the right optic fixed (defect). If I were purchasing again, I would likely start with the Furibee VR01 or the KDS Vision goggles. The KDS goggles have been rebranded a time or two...JJRC sells them as well. I would go the VR01 only due to the simplicity, nearly and battery with jst can power it and the reception, screen and comfort are just as good if not better (comfort) to the KDS goggles. My knock on the KDS goggles is the power button, its stand by not off. So I either had to continue to unplug the battery or add another button. So I added the button as the plug is a bit of a pain. Neither has a dvr but that can be added (KDS) or rather simple to add (VR01). Some find the KDS nose piece isn't big enough, I find it fine.
Nick Burns thank you sir! I will take a look at both. I thought fat shark was the best but I didn't think 500 Goggles should be my first set.(my wife will agree but I didn't ask her! Lol) I'm totally new to this stuff. Seems like the only place to buy is online. My local hobby shops aren't into it.
I saved up and my wife saw how much I fly and knew I lusted after them, they are sexy, but not economical. I think the primary "feature" of fatshark goggles is portability. The image is no better than the other models I mentioned and FatShark batteries are $25 each unless you make your own. My local hobby shop is so overpriced and has only very commercial quads. I called and asked a question once, they had no idea what I was talking about. A "drone" store opened up recently, they are building stock. I think its a group of racers, I will likely buy from them when I can but the micro stuff will surely be online.
Is there any radios out there that will work with the E010 and the Eachine QX series with no modding? I'm looking at getting another radio for getting into these micro quads. Should I go Flysky or Devo 7E ? Which is the bext out of the box option to fly these Eachine Micro quads? Love the channel and thanks for your time and consideration, Desode
by no modding we are saying stock, I would go with flysky. If your willing to put on Deviationtx firmware on the devo7e I would choose the devo. More vehicle options with dsm2/x than flysky. But still range can be an issue with the devo7e if you plan to fly 100+meters out.
So with a devo7E and just adding the deviation software, I would be able to fly my Eachine E010 ? how about the QX line? I have no problems with doing software, but Not a master at sodering by any means! LOL
Sorry, I was unclear. With deviationtx you will be able to use it with DSM2/X protocol receivers. To control the E010 requires the module listed in the video description.
Not natively, it would have to go above or below the inductors/whoops (best above). The scisky corners poke out to much. Adding the scisky will take some light modding, or small 3d print parts.
I use the kds kylin vision goggles. goo.gl/RJyKk6FPV gear needed.Vehicle -E010Goggles - listed aboveCamera - recommend the FX798T goo.gl/XYlrt9Foam tape to mount, or a 3d printed mount listed in the descriptionExtra batteries goo.gl/6LF7LM
I think its close. We always look for better/best. Some might want more yaw with one or roll with the other. The nice bit, its close enough to the same for both it should impact race performance much if at all. Then we have the benefit of new flight controllers to put in these and change how they fly to suit our needs.
If that Bee Brain Cleanflight board for the Tiny Whoop fits this frame, this quad will be flying off the shelf. They have versions with built in rx for DSMX and FrSky, and they're the same price as a stock Inductrix board. I'm looking at this thing mostly as a frame and props. Maybe I'll get two, and keep one stock with fpv so I can just take that tiny remote with me instead of my DX6i
BTW that board is on preorder for $50 here: tiny-whoop.myshopify.com/products/beebrainv1?variant=23506352193 It even has a lead for your camera pre soldered!
Bee Brain!. That's it, I couldn't come up with that in the moment. I would like to give that a go. Benedikt had a live stream tuning that board. he had help from the creator.
+Nick Burns When the tiny Whoop first got popular, I thought whatever, we've been doing brushless micros for a while now, what's the big deal? But watching you get out from under the couch, and seeing other people banging into stuff and flying near people's faces...you can't do that with anything but the tiny whoop! Or the EO10, haha
Nice review. I ordered this thing twice and cancelled it both times. Just wasn't sure with that little controller and tiny battery bay... even for $15. But I think I'll pick one up. What type of charger was that? I was waiting for description and link but never saw 1. I've puffed several 1s batteries from Hobby King (Turnigy) on those cheap chargers that come with toy quads and I don't trust them either. Except with the supplied battery. It seems like they just keep charging hobby grade batteries and never cut off. Anyway, thanks in advance.
For my 1S batteries I use a Hitech x4 in this video th-cam.com/video/qTMuGgFJVPQ/w-d-xo.html They can be purchased all over. They have been rebranded and colored a number of different ways. I am not sure if they are all the same quality. Bendikt at micro-motor-warehouse.com uses or used one, I think he uses his icharger now. I purchased from amazon www.amazon.com/gp/product/B00FYL2INM?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
Hey Nick, How come you were flying smoother with this in the summer than the Furibee F36 you reviewed in December? Is the Furibee transmitter that much worse?
Thanks for the review Nick. This was on my watch list as soon as i saw your preview video when it was still on preorder. I'm thinking of getting the beebrain fc v1 from newbeedrone but I am not too excited about the price. so I'm wondering if it's possible to fit a scisky board on this frame.
scisky won't natively fit. The corners just poke out to much. With some creativity I suspect it can be done. I added link to the E010 parts in the description. goo.gl/CfSDUT I think getting just the frame $2.89 to attempt the mod is a wise choice.
thanks for the video. i think my eachine is defective. in a hover it will yaw to the left but not smoothly, it's like a second hand on a watch ticking backwards. i tried trimming it but that did nothing. do you think I received a broken one? thanks.
This might be from the small transmitter. The stick movements have to be so small to get a smoothish move its really hard. You can extend the pads higher with nylon standoffs or anything that will fit on the nub and in the hole of the pad, that should help get that finer control. I don't think your unit is defective, a failure or defect would likely be more dramatic, like if its spinning like a top or one motor won't spin or can't get the quad off the ground.
. i noticed my eachine the blades were not how the manual said. the A blades were in B rotors and B blades in A rotors. I get the same thing. its not stable. yrimming does nothing. And it goes up and down like crazy. i have trouble keeping it still. it should have a function that it stabilises its height if I dont touch the controller.
Thank you Nick, for the great review. I was almost about to order one, and now I will. To switch battery connectors with one that would work with batteries like the one used on the H8, do you know the name of the female connector. I have tried searching for it and seem to only find the male, which is already on the battery? Thanks again for your video's. Just found the cables and connectors on Banggood (always after I ask). They refer to them as 1s battery charging cable male female.
I don't actually know the name if they aren't called mcpx female, just going by my charger. Another commenter suggest solder our own battery led to the top of the board where I soldered the cam/vtx...also an option.
I fly the E010 and I upgraded it. First put 67000 race star motors banggood, 300 mah battery, put pig tail on it like big quad, fpv camera from banggood for 15 dollars, and iron quad body. If you want to see it in action Triple r 58 TH-cam.
That's fantastic indoor range on both the TX and VTX. I have the same camera on a Syma X11 and couldn't go nearly as far indoors before image and controls were gone. Did you mod that tiny controller and are you using a diversity VRX?
Nope, that as all stock. I do now fly it with my Devo 7e, feels better in the hands. No diversity either. KDS Kylin Vision goggles. I added a dvr to it, and aomway antenna.
Great review! Do you find there to be any appreciable handling differences with the whoop and eachine having different blade orientations? Also, I want to peel that clear protective film off of the scale screen so badly! It's gonna be unreadable after a few more videos! ;-P
That's amazing. I had never noticed the film, I just thought it was my crappy lighting. Scale film has been officially removed. :) As to your question. I don't feel much of a difference in flight. I happen to have a stock inductrix I put a cam on, flying them both with the devo 7e, I don't notice much difference. I do think the inductrix might be slightly more stable. I can't say I am sure on that. I have recalibrated the E010 a time or two, but if there is a difference its minimal. When I fly my upgraded (motors) inductrix I notice the difference but that's not fair. I have left the E010 with stock motors for now.
hey nick, nice review! i already have a nano fpv combo ef01, but it is too heavy for my nano qx. do you think this thing would liftoff with that cam in place? it weights around 6.5 grams. tnx :)
I do think it will liftoff, but throttle will likely be high so flight times will be short/er. Lighter cam/vtx will help a lot, or if you have other 6mm motors they could extend the fun.
They are all made privately. I have yet to be able to get one. I think the killa klownz fpv xc-1 or something like that is a 8mm version. Last I checked he is waiting for more. There are likely more, join the brushed FB group Custom built brushed motor.... here facebook.com/groups/custommicroflyer/?ref=group_browse_new
+Nick Burns Do the thumb pads pull off of the tx. sticks by any chance? I have extended the sticks on two other mini controllers and it really made a huge difference. You can sometimes extend the antenna wire through the front of the Tx. for a little extended range.
The thumbs do come off and leave a tiny nipple in its place. goo.gl/photos/U33Q19zC8xk2Sfyw5I don't have any sticks that fit. :(. I haven't tested range, I suspect is pretty descent for something this size. I have flown from the basement to our top floor without issues.
*43% Discount on this drone* www.banggood.com/Eachine-E10-Mini-Headless-Mode-2_4G-4CH-6-Axis-LED-RC-Quadcopter-RTF-p-1045976.html?p=B0221338596320131216
I am prepping something close. The basics, are a camera with vtx (I use fx798T), a mount or foam tape, whatever sticks it to the board and solder the camera wires to the top side of the battery plug. That's the fpv part outside of googles. Most prefer to change out motors as well.
The tx02 weights almost the same 0.4g of difference. In fact you know what, Ill buy a switcheable vtx the h8 mini (it has better handling) plus 220mah batteries it will be nice.
.4g change from the tx01, or cm275t? cm275t I believe weighs in about 3.4grams. My recollection the tx02 over 5g. No worries, if it works run with it. Fun is fun.
Did you calibrate it on a nice level surface? I don't recall the stick commands, but should be in the instructions. Also ensure the props are on correctly.
I can't for the life of me, balance this thing. Even when it takes off it takes off at an angle and can't really hover in one spot, is it a case of my lackluster balancing skills or might there be a problem with the one I got?
Yours is stock E010? it should auto level. Try to calibrate is on a nice flat surface. I don't recall the stick commands, but they should be in the instructions. Sorry I don't have this one stock anymore.
Yes it's stock E010, it just feels like something's wrong with it since it can never auto balance. I've seen a couple of videos where people seem to control it seemlessly, it always goes off at some direction when I try to fly it
sounds to me like you're confused these do not have GPS they do not hover in one place as soon as you give it throttle it's going to drift and you have to always give it corrections to make it hover in one place
+Nick Burns not yet, I'm buying myself a 3d printer in October so then I may start with fpv, or I'll just put a wifi fpv camera from the WLtoys v686/q222 on top.
And if you don't want to try a maybe difficult or tricky camera mounting, eachine offers us a good option, the E013 with it's pre-installed camre and optionnal fpv googles ! www.banggood.com/Eachine-E013-Micro-FPV-Racing-Quadcopter-With-5_8G-1000TVL-40CH-Camera-VR006-VR-006-3-Inch-Goggles-p-1182628.html?p=PB110915063962201710
Stupid that they did the battery the way they did. They should've known people would want to Whoop it, and you have to modify it to get a lead off for a micro cam. I'm gonna put a Losi connector on it and use the Floureon 150mah 30C batteries that I already have ten of. They're awesome little packs, you can get 5 of them on Gearbest for a couple bucks a pop
Let me know how the floureon packs feel. Another commented we could add a new batter lead to the top of the original pins. This is where I soldered the cam to.
Thanks for the video, I'm getting one. I think I might put a spare Nano QX board in this, with Spintech or MMW fast motors. So much cheaper than an "official" Tiny Whoop
yep yep. I think Blade should have iterated faster to capitalize. I still wonder why no 7mm or 8mm motor variants yet. Well there are those options in 3D print or heavy options.
I have it seems pretty good. Doesn't it have a section that is CF? Seems like that is the section everything would attach to, otherwise the motors would rip it apart. That might be fun, but only once.
Just checked it out and I think the whole thing is printed, looks like a single piece too. Not sure what kind of material, but I do worry about durability.
Anyone knows where you can get some extra batteries? The stock ones at banggood are out of stock... Someone below recommended Floureon from GearBest... but 12$ for 5, vs 2.99 for 5 (the stock ones at BG) is too big of a difference for me...
Those are the two site I would go to. Check dealsmachine.com maybe search for the Eachine E010 and any shop that has it look for the batteries. Be careful of shipping cost.
Great detail vid. Awesome. BTW, that component glued to the board at th-cam.com/video/vRDLGNe6Wj0/w-d-xo.htmlm16s is a crystal. They usually get mounted solid like that on devices made to move. ;)
Oh, yea, I couldn't believe this was so popular. As excited as I was to see it on the market, others were as well. I still remember this showed up on like a thursday, and my wife took the kids on a trip. I charged and flew for all my waking hours. :)
@@NickBurnsFPV OMG! Same here..lol.. I got a red one that actually had the all in one camera/Vtx that came with it. $90 bucks back then..I literally burnt the motors up the first week I had it. And killed many packs! And was on Ebay/Amazon buying more motors in bulk until Newbeedrone motors come out. I learned the fundamentals of flying with this little quad. And then Adam Douglas sold me my first Tomoquad 2.5. build. And from there after many crashes I learned to fly acro! And the rest is history now after thousands of dollars hundreds of builds I still get excited to fly😀 Only fun a old man that is 50 years old can have thats got family children and a company to run. Good times with FPV
I see devo 10 all over the thumbnails. Lucky, I lust after a larger devo, I keep telling myself to buy one, but then I spend it all on other quad stuff. The constant what next syndrome.
I have to many problems with the e010, I only get a minute 30 before it dosen't have enough power to ful throttle forward without falling and ssme for yaw, I get to much battery sag...... using an e010 and t02 camera
@@NickBurnsFPV yes, I started working on it for a buddy yesterday because he dosen't know how to solder but has seen me messing around with my whoops at work and wanted one for himself but has a low budget so I recommend getting an e010 and If solder a tx02 on it...... im using the stock 150mah batterys and only get about a min 30 before pitching forward starts drifting down even with full throttle and when moving forward and yawing I start descending even at full throttle, ive used some of my 220mah batteries to test them and they seem to help quite a bit and I get about 3 mins before having any issue, I have some bigger batterys on order to try them out
@@jsfishing3813 ah I see. This was so long ago I would think some 300mah batteries might be in order. i don't recall the weight of the tx02, if over 4 grams a lighter camera might help as well.
@@NickBurnsFPV thanks, im definitely getting some batterys and a larger charger along with it...... keep up the good work! I love the channel so far! I was pretty surprised to even get a response from such an old video
nick I got the captures done today amd goebish has hacked the protocol already, i've posted a video and details in the rcg thread linked in this videos description. keep up the good work with your channel Happy|Harry from rcg
sorry it was another e010 video that had the rcg thread link, anyway here's the thread with the details of the e010 protocol on a devo ultimate7e > www.rcgroups.com/forums/showthread.php?p=35585987
Thanks. I added this information to the descriptioin. Did the shoulder button get sorted? Soulsmoke has it correct. Sticks don't click. Devo all the way.
Just to let people know I purchased the Quad air drone that is heavily advertised on you tube. It is not as advertised. It took half a battery to connect to my samsung phone. And the view was awful.
This looks almost identical to my HS210 and this video is 7 years old! Can't wait to be able to afford a real whoop one day but these toy quads are amazing for getting folks into the hobby like myself.
I just started FPV last week and have been very amazed by all your straight forward reviews! This is the first time I am watching you fly so slow! Great video as always.
lol, boy that was a minute ago wasn't it. Not that is was the limiting factor, but I remember that peanut controller. So small.
It's cool to see that I "liked" this video 6 years ago. Id like it again if I could. Thanks Nick
Would you recommend this over the mobula 6?
Lol
your digging back in the archive :). The house has really changed hasn't it.
@@NickBurnsFPV haha it has! Lol you have gotten waayyyy more comfortable with the camera too. Thanks for all the content man, seriously. You’ve helped me get into FPV big time and I feel like I can’t thank you enough!
If you ever have time to see my whoop videos on my channel, you can see the inspiration 😝
@@avasianfpv Holy Catfish!!! I just watched your 5inch in the basement flight. Great control, and guts to boot. Mobula rip was equally great. Your really good. Thank you for sharing.
@@NickBurnsFPV 😝😝 thanks so much!!
micro losi batteries fit on these connectors. You have to cut the little nibs of plastic on the losi and it will fit right in. Also you can solder a second connector on the flight controller. You solder it on the top on the fc and dont remove the original one. They both will work.
great video. I just bought one on the strength of watching this then started reading the comments and decided to buy another one! Much respect for taking so much time out to respond to all questions. You do a great job. (btw, just getting into fpv too so all info was covered and very useful) Thanks!
Great I am glad the video helped.
Only flew my E010 once....... Before slapping a cam on it ! :)
I used one of the Eachine EF-01 all in ones (Because I had it handy) and I'm amazed that those tiny motors can still get that lot off the ground. I've ordered a few better (200mAh) cells and some Chaoli CL-615 motors to try to get back some of the limited punch this little quad had...... I just hope the board can take the extra current these'll pull through it (Ordered a spare just in case. :) ).
As stock (For the money) These are an amazingly good little quad. I'm blown away with mine.
yes, Eachine did make some improvements. I think the struts will hold up better too. What batteries did you get?
Just the ones branded as "Eachine 3.7V 200mah 30C Lipo Upgrade Battery for Blade Inductrix" on BangGood. God knows if they're any good, But the folks reviewing them seem to like 'um, So we'll see.
I'm going to have to trim the end of the battery holder on the E010, de-solder the power plug and reconnect it on a couple of short wires to get these cells to fit , But that shouldn't be an issue.
Apart from this and the motors, I doubt I'll upgrade much else on my "Cheapskate whoop" as I've also got a QX90 (And some blade guards) coming soon to cater for my indoor FPV amusement needs. :)
I like the name "Cheapskate whoop". Have you tried the 205mah or 175 mylipos? www.mylipo.us/Lipo-205mAh-37V-1S-25C-50C They are what I use. They also have a warehouse at mylipo.de
I'd never even heard of them before you linked to their site.
But as I said, I've already ordered the BangGood ones, and don't intend to spend much more on the E010. It was really only ment to be a stop gap while waiting for the QX90 to come back into stock, But I REALLY wasn't expecting it to be as good as it is. Part of the reason for going for the QX90 was because I've already got a metric shedload of suitable cells to use on it. I used to be heavily into E-Cigs, And made several chunky multi LiPo based "Box mods" for people, That was before the market caught up and suddenly you couldn't move for high powered devices. Despite trying to use them on everything I can (My backup FS i6 TX now runs a parallel pair, And even my old beard trimmer's had the pathetic little set of duff Ni-Mh cells replaced with a single LiPo and 5V charging board...... From 2.4 to 4.2V..... It goes like the clappers now ! LOL !) I still have a big LiPo safe bag full of these little Turnigy nano-tech cells.
I've saved the link to my browser and if I need any cells in the future I'll have another look to compare prices.
sounds like your set for batteries for awhile. If you want to explore you might also consider micro-motor-warehouse.com/collections/batteries/products/mylipo-480mah-40c-1s-battery-3-7v Its the best battery I have tried on micros. I have fallen out of favor with HK 1S batteries.
I would like to be more of this kind of quads , small and with ducted props. Brushless engine would be great .
From my beginner experience a good quad to learn is a very small one and with protected props like this one.
I think with this beginners can learn faster, you can risk more when fly than with a big one, if crush no demage
And you can fly indoors.
There are some options from guys on facebook, take a look at the Micro Brushless group on facebook.
awesome Nick. Thanks for the review. I couldn't decide between red and green so I ordered both. still waiting for them. I plan on modding the battery for sure. I'd like to get a 380mah in it, we will see.
I would calculate the x mah against x gram to find the tipping point between mah and weight. two is good. I tend to "rest" my brushed quads between flights. Not sure its needed or not, gives me piece of mind.
+Nick Burns I will have to look up the ratio of weight to mah. I'm not sure what it is. I fly 5 batteries one right after he other through my micro brushed quads haven't burnt a motor yet. I have a dromida vista that burnt motors after very little flight and the replacements were crap too. I won't buy dromida again.
Great video sir!
I have a couple of these on the way. I guess i need to prder up some spintechs.
Yeah it looks like modding the battery connector is easy peasy if you solder.
It looks from here like you could simply solder the connector on the top side, or replace it with whichever connector suits.
I'm going try my hand at FPVing it too. I guess many of us are there or are headed there.
I also look forward to flying these with my Devo
Awesome flight!
yes, fpv is good fun and these little indoor flyers give us the ability to fly and enjoy when time or the weather doesn't allow.
Great comparison vid man!! ive been on the market for a tiny!
thanks
Uses same battery connector as Blade QX 3D and WLtoys V911, I have both of those but the batteries all have the connector attach to the battery with no lead, looks like best option will be to solider a connector with lead, I see no reason to remove the old connector, just solider on other side of board , but then again as you said stock batteries are cheap
yep. I did add a led to the top and left the original in place here. th-cam.com/video/0IFja3D7_UUS/w-d-xo.htmleemed to be logical to leave the original connector in place. Its not in the way of the batteries or anything.
it's funny to see you flying back then and then see you flying now days but how did you get that thing to carry a camera, mine never could....
Hmm I don’t suspect I did anything special other than use an all in one camera and vtx, probably weigh around 4grams
You have always been so dang detailed in your reviews... amazing! I know I made one of theses back in the day. Than came the US65 Lol
Thanks for the video. I'm still waiting for mine. Maybe today. Alway enjoy your videos. Full of great info. Nice House.
Thanks. Funny, I get as many complements on the house as the quads.
Nick, what are the dimensions of the receiver board? Would it be possible to take that out and fit in a Scisky instead?
scisky won't fit natively, the corners stick out about 4mm. The stock inductrix board will fit, so the bee brain should fit too. There are actually mounting holes for the stock inductrix and bee brain. Stock board dimensions: nose is 6mm the middle is 22mm and tail is 8.5mm. The gaps are consistent, but the board measurement front and back are different.
Beebrain should fit, it was designed for the stock inductrix after all. The problem will be whether any of the screw holes line up.
my first whoop , and i modded it for fpv . worth it
yes, many of us did. This was pretty revolutionary when it came out as the only other whoop at the time was the inductrix by horizon hobby.
hii
How long the engines lasts ???? How many flights???
this are brushed engines , so tiny that can't be repaired.
I had the Sima x4 I liked the quad but the engines had very short life only a few flights ( 8 - 10 flights )
Brushless is much much better, much longer life span.
True, brushless tend to run longer. There are many variables in motor life, flight style, motor impacts, severity of impacts etc. In the case of my brushed micros the number of flights hasn't been short enough to remember the flight count. I would estimate 40+ flights.
Thanks for your replay
Perhaps the engines to syma x4 is bad or because I was very beginer and I crushed many times.
I changed the engines a few times and the same.
An engine that is brushed( have some tiny wires that touch the collector at very high RPM )
will not last long.
Brushless are better by far in my opinion.
I like alot the quad E010 and hope thy will make a brushless version.
I liked the cat! *thumbs up*
Does she play with the micros?
He does. He is sneaky....I have had a number of swipes out of air. Its an odd feeling but always make me laugh.
LOL... the battery connector that comes on this quad is the same as the "High-Performance Upgrade" or "PowerWhoop" connector. Folks pay $3-6 to upgrade to this connector so they can use better batteries and not be saddled with the stock NanoQX power connector which is a POS and causes premature LVC.
This Quad is available now for $13.99... as a cheap buildup with a NQX FC or aftermarket FuriBee/F3 Brushed FC, plus it comes with 2X props, battery and free upgrade parts... it's a no-brainer, man.
That is if you can stop yourself from leaving it stock and just throwing it in your dufflebag for a quickie at lunchtime. :p
Nick. I want to get my 6 year old introduced to flying this summer is this the drone you would suggest he learns to fly on? Thanks Geremy.
The controller is very small and would work better for young children. I wouldn't suggest flying this outside if there is much wind, its very difficult for novice flyers to control it in wind.
way better than expected. if the protocol is deviated, it will be sweet!
if you want JST, just solder it to top of FC?
i think mCPX can handle slightly higher amperage than jst. or at least, it is not as fast to wear out..
oh, I had always thought jst delivered more juice? That is a good point on soldering to the top. Now we either mod the battery bay or wait for better batteries that fit.
Kind of crazy how far the micro market has come...and seeing this vs. the mobula 7 vid lol.
No doubt, this was bigtime at the time.
Great drone! The JJRC H36 is even better. JJRC is the orginal manufacturer of this drone. Eachine buys it rebranded from JJRC
No kidding? Does it use the same protocol with deviation (MJXq ->E010)
Yes the one we call eachine E010 was originaly the jjrc h36 :D
Then eachine add some level :
the E011 :
whith instead of the useless plastic piece thas is used as a canopy, they put a lego one, and sell it with a knight or santa
the E013 :
with a fpv camera pre-installed, and as an option cheap FPV googles. For me it's the best variation of the goog old H36 :p
www.banggood.com/Eachine-E013-Micro-FPV-Racing-Quadcopter-With-5_8G-1000TVL-40CH-Camera-VR006-VR-006-3-Inch-Goggles-p-1182628.html?p=PB110915063962201710
Wow! This video brings back some memories for sure. It's amazing how quickly this hobby is progressing. You've always been an inspiring pilot. Even back then. I have one question. I remember when you first flew through your treadmill and I nearly jumped out of my chair with excitement! Now you zip through it with ease every time you fly indoors. Is that the same treadmill? Is it just an expensive and nostalgic race gate or does somebody actually use it for it's intended purposes? I know it's a stupid question but I'm just curious.
We have had two treadmills. Most recently the treadmill is used by my wife in the colder months and my two oldest kids. My running days are over, but I will likely use it for getting some extra steps. :)
What is the flight time?
with fpv, stock about 3 minutes.
12:55 just cut that blocking part at the other end of the battery holder
great vid how did u add cam to the eachine
buy an FX798Tbit.ly/2gbV4Gp or another super light micro camera vtx combo and solder the red and black wires to the same spots on the board where the battery goes.
Question: If I get two of these (so my son and I can fly alongside in the living room), would they work or would we have interference issues with the signals and the controllers? Thanks for your answer.
Two or more can fly at the same time. If you put fpv cameras on them change the channels so not to interfere with each others video signal.
Great video! Im definitely considering buying this one! What camera did you put on the Eachine E010?
I recommend the FX798T or CM275T
Great review mate and thanks. Just waiting for mine to show up now but have a question regarding the props, Do you think they are exactly the same as the whoop props? have you tried swapping them out and tried on the Inductrix?
I did try them, inductrix on E010 and reverse. In flight I feel no difference. Visually, look identical.
Awesome thanks for your help. Cheers
Flight time with the fpv camera and the original battery??
Thanks
about 3 min according to the video.
what transmission distance of this FPV system?..................good video!,,,,,,, thanks
Likely somewhere around 40-60 meters for the control link.
Hi nick your video is amazing - Thanks for the efforts. Is there a video for the FPV setup - what googles do you use for the FPV & what video transmitter.
The camera and vtx combo I used is the fx798T linked in the description. I didn't do a review, when I got mine there were many reviews already. My primary goggles are the KDS kylin vision googles. They have also been rebranded to jjrc. I did a mod to them to add the dvr function in this video. th-cam.com/video/iDLrw_hIvfE/w-d-xo.html
What fpv goggles are you using? I'm looking for a good beginner option but I've flown for years. Just never fpv.... So I'm ok spending a little more on something that will last me a while. Not really interested in racing... Just a solid fpv device.
The market is really split into halves. the $100 or sub $100 and the $500 market. Now having used the FatShark HD3 goggles for a few weeks, I don't think I would purchase again. Especially as I have to send them back to get the right optic fixed (defect). If I were purchasing again, I would likely start with the Furibee VR01 or the KDS Vision goggles. The KDS goggles have been rebranded a time or two...JJRC sells them as well. I would go the VR01 only due to the simplicity, nearly and battery with jst can power it and the reception, screen and comfort are just as good if not better (comfort) to the KDS goggles. My knock on the KDS goggles is the power button, its stand by not off. So I either had to continue to unplug the battery or add another button. So I added the button as the plug is a bit of a pain. Neither has a dvr but that can be added (KDS) or rather simple to add (VR01). Some find the KDS nose piece isn't big enough, I find it fine.
Nick Burns thank you sir! I will take a look at both. I thought fat shark was the best but I didn't think 500 Goggles should be my first set.(my wife will agree but I didn't ask her! Lol) I'm totally new to this stuff. Seems like the only place to buy is online. My local hobby shops aren't into it.
I saved up and my wife saw how much I fly and knew I lusted after them, they are sexy, but not economical. I think the primary "feature" of fatshark goggles is portability. The image is no better than the other models I mentioned and FatShark batteries are $25 each unless you make your own. My local hobby shop is so overpriced and has only very commercial quads. I called and asked a question once, they had no idea what I was talking about. A "drone" store opened up recently, they are building stock. I think its a group of racers, I will likely buy from them when I can but the micro stuff will surely be online.
How did you set camera
Is there any radios out there that will work with the E010 and the Eachine QX series with no modding? I'm looking at getting another radio for getting into these micro quads. Should I go Flysky or Devo 7E ? Which is the bext out of the box option to fly these Eachine Micro quads? Love the channel and thanks for your time and consideration, Desode
by no modding we are saying stock, I would go with flysky. If your willing to put on Deviationtx firmware on the devo7e I would choose the devo. More vehicle options with dsm2/x than flysky. But still range can be an issue with the devo7e if you plan to fly 100+meters out.
And to my knowledge only the devo line with deviationtx or the stock radio will bind with the E010.
So with a devo7E and just adding the deviation software, I would be able to fly my Eachine E010 ? how about the QX line? I have no problems with doing software, but Not a master at sodering by any means! LOL
Sorry, I was unclear. With deviationtx you will be able to use it with DSM2/X protocol receivers. To control the E010 requires the module listed in the video description.
I gotcha. thanks for the clarification and all your help! Sincerely Desode
Nice video, do you know if the Scisky board will fit in that frame?
Not natively, it would have to go above or below the inductors/whoops (best above). The scisky corners poke out to much. Adding the scisky will take some light modding, or small 3d print parts.
hello Nick. thank u. New to all this FPV flying. Could you pls. send a link to VR gear? If I buy the camera, is VR gear all I need? thanks in advance.
I use the kds kylin vision goggles. goo.gl/RJyKk6FPV gear needed.Vehicle -E010Goggles - listed aboveCamera - recommend the FX798T goo.gl/XYlrt9Foam tape to mount, or a 3d printed mount listed in the descriptionExtra batteries goo.gl/6LF7LM
Thanks Nick. Unable to open the first and second links.
Ack. youtube formatting got me. goo.gl/RJyKk6 and goo.gl/XYlrt9
I hear this frame is more resilient that the inductrix , and this is much cheaper to build, but Does it maneuver as well for racing?
I think its close. We always look for better/best. Some might want more yaw with one or roll with the other. The nice bit, its close enough to the same for both it should impact race performance much if at all. Then we have the benefit of new flight controllers to put in these and change how they fly to suit our needs.
If that Bee Brain Cleanflight board for the Tiny Whoop fits this frame, this quad will be flying off the shelf. They have versions with built in rx for DSMX and FrSky, and they're the same price as a stock Inductrix board. I'm looking at this thing mostly as a frame and props. Maybe I'll get two, and keep one stock with fpv so I can just take that tiny remote with me instead of my DX6i
BTW that board is on preorder for $50 here: tiny-whoop.myshopify.com/products/beebrainv1?variant=23506352193 It even has a lead for your camera pre soldered!
Bee Brain!. That's it, I couldn't come up with that in the moment. I would like to give that a go. Benedikt had a live stream tuning that board. he had help from the creator.
+Nick Burns When the tiny Whoop first got popular, I thought whatever, we've been doing brushless micros for a while now, what's the big deal? But watching you get out from under the couch, and seeing other people banging into stuff and flying near people's faces...you can't do that with anything but the tiny whoop! Or the EO10, haha
true
Awesome! Thanks Nick :)
I'm still waiting for mine in the mail.
yes, its pretty good. I am always a bit tentative when eachine brings "their own" to market. They seems to have a shotgun approach.
Nice review. I ordered this thing twice and cancelled it both times. Just wasn't sure with that little controller and tiny battery bay... even for $15. But I think I'll pick one up. What type of charger was that? I was waiting for description and link but never saw 1. I've puffed several 1s batteries from Hobby King (Turnigy) on those cheap chargers that come with toy quads and I don't trust them either. Except with the supplied battery. It seems like they just keep charging hobby grade batteries and never cut off. Anyway, thanks in advance.
For my 1S batteries I use a Hitech x4 in this video th-cam.com/video/qTMuGgFJVPQ/w-d-xo.html They can be purchased all over. They have been rebranded and colored a number of different ways. I am not sure if they are all the same quality. Bendikt at micro-motor-warehouse.com uses or used one, I think he uses his icharger now. I purchased from amazon www.amazon.com/gp/product/B00FYL2INM?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
Thanks!
Hey Nick, How come you were flying smoother with this in the summer than the Furibee F36 you reviewed in December? Is the Furibee transmitter that much worse?
I think it has to do with the F36 thrust is much greater and the yaw rate higher than I could handle.
wich is the better buy would you say the Eachine H8 Mini Headless Mode or eashine e010??
That's tough. Purely flight....H8, indoor flight E010. Style....E010. Flexibility...H8.
What kind of goggles and software You used for this video?
I used the kds kylin vision goggles with Eachine pro dvr. Software?
Thanks for the review Nick. This was on my watch list as soon as i saw your preview video when it was still on preorder. I'm thinking of getting the beebrain fc v1 from newbeedrone but I am not too excited about the price. so I'm wondering if it's possible to fit a scisky board on this frame.
scisky won't natively fit. The corners just poke out to much. With some creativity I suspect it can be done. I added link to the E010 parts in the description. goo.gl/CfSDUT I think getting just the frame $2.89 to attempt the mod is a wise choice.
Awesome! Thanks for the link!
I want to buy this drone can you give any advice to buy this how is the drones controls and everything??
This is very old. I would look for something more current. I can't tell you much about it as it was so long ago.
thanks for the video. i think my eachine is defective. in a hover it will yaw to the left but not smoothly, it's like a second hand on a watch ticking backwards. i tried trimming it but that did nothing. do you think I received a broken one? thanks.
This might be from the small transmitter. The stick movements have to be so small to get a smoothish move its really hard. You can extend the pads higher with nylon standoffs or anything that will fit on the nub and in the hole of the pad, that should help get that finer control. I don't think your unit is defective, a failure or defect would likely be more dramatic, like if its spinning like a top or one motor won't spin or can't get the quad off the ground.
.
i noticed my eachine the blades were not how the manual said. the A blades were in B rotors and B blades in A rotors.
I get the same thing. its not stable. yrimming does nothing. And it goes up and down like crazy. i have trouble keeping it still.
it should have a function that it stabilises its height if I dont touch the controller.
Can you do a thrust test of the stock motors? Wondering if they're the same as the CL615-14 banggood sells
I can. I have some more motors coming to compare it to. Likely still a week or two away.
Thank you Nick, for the great review. I was almost about to order one, and now I will.
To switch battery connectors with one that would work with batteries like the one used on the H8, do you know the name of the female connector. I have tried searching for it and seem to only find the male, which is already on the battery?
Thanks again for your video's.
Just found the cables and connectors on Banggood (always after I ask).
They refer to them as 1s battery charging cable male female.
I don't actually know the name if they aren't called mcpx female, just going by my charger. Another commenter suggest solder our own battery led to the top of the board where I soldered the cam/vtx...also an option.
Yes, that sounds like a good option and that way I can use either battery.
Thank you!
Sure, and thanks to them too.
I fly the E010 and I upgraded it. First put 67000 race star motors banggood, 300 mah battery, put pig tail on it like big quad, fpv camera from banggood for 15 dollars, and iron quad body. If you want to see it in action Triple r 58 TH-cam.
That's fantastic indoor range on both the TX and VTX. I have the same camera on a Syma X11 and couldn't go nearly as far indoors before image and controls were gone. Did you mod that tiny controller and are you using a diversity VRX?
Nope, that as all stock. I do now fly it with my Devo 7e, feels better in the hands. No diversity either. KDS Kylin Vision goggles. I added a dvr to it, and aomway antenna.
Great review! Do you find there to be any appreciable handling differences with the whoop and eachine having different blade orientations? Also, I want to peel that clear protective film off of the scale screen so badly! It's gonna be unreadable after a few more videos! ;-P
That's amazing. I had never noticed the film, I just thought it was my crappy lighting. Scale film has been officially removed. :) As to your question. I don't feel much of a difference in flight. I happen to have a stock inductrix I put a cam on, flying them both with the devo 7e, I don't notice much difference. I do think the inductrix might be slightly more stable. I can't say I am sure on that. I have recalibrated the E010 a time or two, but if there is a difference its minimal. When I fly my upgraded (motors) inductrix I notice the difference but that's not fair. I have left the E010 with stock motors for now.
hello do you have a link to show me how to ad this vid cam to this quad complet instructions thank you
I am prepping a video that will show the E010 in a completed fashion. There isn't much to it, but I go over it briefly.
thank you
What is your tiny TX FPV Video
FX798T. 4.5grams with the case off. goo.gl/j8ooJl
Hey I have a jjrc h36 ..I enjoy it allot
hey nick, nice review! i already have a nano fpv combo ef01, but it is too heavy for my nano qx. do you think this thing would liftoff with that cam in place? it weights around 6.5 grams. tnx :)
I do think it will liftoff, but throttle will likely be high so flight times will be short/er. Lighter cam/vtx will help a lot, or if you have other 6mm motors they could extend the fun.
ill probably still gonna get it, only for the price, but would you know any other indoor quad which has 7 o 8mm motors, which could carry that cam?
They are all made privately. I have yet to be able to get one. I think the killa klownz fpv xc-1 or something like that is a 8mm version. Last I checked he is waiting for more. There are likely more, join the brushed FB group Custom built brushed motor.... here facebook.com/groups/custommicroflyer/?ref=group_browse_new
Nick Burns tnx! im going for a hubsan h107c, but i cant really find if it has 8 or 7mm motors. do you know that?
did a google search for "hubsan h107c motor size". According to the results and Banggood and amazon the motors are 8.5mmx20mm.
will that FPV camera work with the Eachine 007's?
Yes. The camera has 40 channels
Ok thanks, by the way I just found your channel and love it, I am actually am watching your Crusader video now
+grant disser thanks for coming. Let me know if I can help with something.
Ok! Thanks
It has no acro mode, right?
correct, just 2 "rates"
I would definitely move that battery lead,or even change to a different se up. why not?
yep, did the last video.
where did ypu buy the camara
The FX798T can be purchased from banggood.com and gearbest.com. goo.gl/j8ooJl
Great Review!! Cant Wait to see some Mods for this One!!
I am sure there will be a mullet, motors, and mounts...maybe more.
I'll be one of the herd for that price, I just ordered the VTX camera and E010 for the same price as the Whoop. I used your link😀
That price is very compelling. And the cost of parts too.
+Nick Burns Do the thumb pads pull off of the tx. sticks by any chance? I have extended the sticks on two other mini controllers and it really made a huge difference. You can sometimes extend the antenna wire through the front of the Tx. for a little extended range.
The thumbs do come off and leave a tiny nipple in its place. goo.gl/photos/U33Q19zC8xk2Sfyw5I don't have any sticks that fit. :(. I haven't tested range, I suspect is pretty descent for something this size. I have flown from the basement to our top floor without issues.
+Nick Burns My buddy is printing me a set www.thingiverse.com/thing:1764530
*43% Discount on this drone* www.banggood.com/Eachine-E10-Mini-Headless-Mode-2_4G-4CH-6-Axis-LED-RC-Quadcopter-RTF-p-1045976.html?p=B0221338596320131216
any tutorial on the FPV stuff?
I am prepping something close. The basics, are a camera with vtx (I use fx798T), a mount or foam tape, whatever sticks it to the board and solder the camera wires to the top side of the battery plug. That's the fpv part outside of googles. Most prefer to change out motors as well.
ty
Just bought TX02 fpv camera 200mw (I always want enough power) and this quadcotper, IT WILL BE A BLAST.
It might be a bit on the heavy side. If your flights are shorter than you desire may have to switch to a lighter cam/vtx.
The tx02 weights almost the same 0.4g of difference. In fact you know what, Ill buy a switcheable vtx the h8 mini (it has better handling) plus 220mah batteries it will be nice.
.4g change from the tx01, or cm275t? cm275t I believe weighs in about 3.4grams. My recollection the tx02 over 5g. No worries, if it works run with it. Fun is fun.
mine use aio camera when throttle up so noise and i got black screen how to fix this?
This is a lack of 5v regulator. Those lines are electrical feedback from the motors. Need a AIO camera with 5v regulator.
thanks nick, I thinks i should buy new aio camera with this
Link to an fpv camera would be awesome! :D
FX798T goo.gl/j8ooJl
You got a sweet house for flying minis lol awesome👍
thanks
That is so cool. I gotta try this.
the "whoops" and micros are fun and keep me out of trouble in the winter.
My e010 flies to the left. Any idea what it could be?
Did you calibrate it on a nice level surface? I don't recall the stick commands, but should be in the instructions. Also ensure the props are on correctly.
Thanks yeah I calibrated it properly, and I put new blades on it. I dunno, maybe i crashed it too many times.
I would have to assume there is something wrong with the board.
James Davidson mine does that after ending in a dirty surface, try to clean beneath the engine and the blades. Hope it helps
Have you tried to reset gyroscope on a level surface (the command : right stick to th bottom left)
thanks. you just answered all my questions :D im for sure going too buy that drone. :D
Great, have fun.
Great info and nice house!
thanks
I can't for the life of me, balance this thing. Even when it takes off it takes off at an angle and can't really hover in one spot, is it a case of my lackluster balancing skills or might there be a problem with the one I got?
Yours is stock E010? it should auto level. Try to calibrate is on a nice flat surface. I don't recall the stick commands, but they should be in the instructions. Sorry I don't have this one stock anymore.
Yes it's stock E010, it just feels like something's wrong with it since it can never auto balance. I've seen a couple of videos where people seem to control it seemlessly, it always goes off at some direction when I try to fly it
I would have to assume something is wrong with the board. Or some prop blades are bent.
sounds to me like you're confused these do not have GPS they do not hover in one place as soon as you give it throttle it's going to drift and you have to always give it corrections to make it hover in one place
GPS is not required for balancing, it has a gyroscope which is used for that
You could solder a jst or other connector from the top, this way you don't destroy the original connector.
correct. At the time I didn't think of that, but many other have. :)
+Nick Burns I just ordered 2 with 5 spare batteries. Hopefully they arrive soon.
nice. So they are still in stock. I think they will be very popular. Did you get a camera too? or no FPV for now?
+Nick Burns not yet, I'm buying myself a 3d printer in October so then I may start with fpv, or I'll just put a wifi fpv camera from the WLtoys v686/q222 on top.
Thanks very informative. considering buying a drone, all I am reading says buy cheap first and learn to fly. then upgrade! this may be my first.
its safest to buy less expensive and see if fpv is something you enjoy and are able to adjust to the feeling.
And if you don't want to try a maybe difficult or tricky camera mounting, eachine offers us a good option, the E013 with it's pre-installed camre and optionnal fpv googles !
www.banggood.com/Eachine-E013-Micro-FPV-Racing-Quadcopter-With-5_8G-1000TVL-40CH-Camera-VR006-VR-006-3-Inch-Goggles-p-1182628.html?p=PB110915063962201710
Stupid that they did the battery the way they did. They should've known people would want to Whoop it, and you have to modify it to get a lead off for a micro cam. I'm gonna put a Losi connector on it and use the Floureon 150mah 30C batteries that I already have ten of. They're awesome little packs, you can get 5 of them on Gearbest for a couple bucks a pop
Let me know how the floureon packs feel. Another commented we could add a new batter lead to the top of the original pins. This is where I soldered the cam to.
Stabilized, and thumbing. Bet it was a fun time getting used to that again the first flight haha.
I have barely flown los since....way back in 2016
Thanks for the video, I'm getting one. I think I might put a spare Nano QX board in this, with Spintech or MMW fast motors. So much cheaper than an "official" Tiny Whoop
yep yep. I think Blade should have iterated faster to capitalize. I still wonder why no 7mm or 8mm motor variants yet. Well there are those options in 3D print or heavy options.
Have you seen the Doinker frame? It's a 3D printed ducted fan design like a blown up inductrix, for brushless motors. Looks interesting
I have it seems pretty good. Doesn't it have a section that is CF? Seems like that is the section everything would attach to, otherwise the motors would rip it apart. That might be fun, but only once.
Just checked it out and I think the whole thing is printed, looks like a single piece too. Not sure what kind of material, but I do worry about durability.
Anyone knows where you can get some extra batteries? The stock ones at banggood are out of stock... Someone below recommended Floureon from GearBest... but 12$ for 5, vs 2.99 for 5 (the stock ones at BG) is too big of a difference for me...
Those are the two site I would go to. Check dealsmachine.com maybe search for the Eachine E010 and any shop that has it look for the batteries. Be careful of shipping cost.
Do you know what's the stock battery weight? I've found one that is 7g...
stock battery is 4.3grams. 7grams might work but the upgraded battery I fly with is 5.1gram 175 mylipo
Great detail vid. Awesome. BTW, that component glued to the board at th-cam.com/video/vRDLGNe6Wj0/w-d-xo.htmlm16s is a crystal. They usually get mounted solid like that on devices made to move. ;)
Thanks
Remember when we started here?
Oh, yea, I couldn't believe this was so popular. As excited as I was to see it on the market, others were as well. I still remember this showed up on like a thursday, and my wife took the kids on a trip. I charged and flew for all my waking hours. :)
@@NickBurnsFPV OMG! Same here..lol..
I got a red one that actually had the all in one camera/Vtx that came with it. $90 bucks back then..I literally burnt the motors up the first week I had it. And killed many packs! And was on Ebay/Amazon buying more motors in bulk until Newbeedrone motors come out. I learned the fundamentals of flying with this little quad. And then Adam Douglas sold me my first Tomoquad 2.5. build. And from there after many crashes I learned to fly acro! And the rest is history now after thousands of dollars hundreds of builds I still get excited to fly😀 Only fun a old man that is 50 years old can have thats got family children and a company to run. Good times with FPV
I was directed here by the E017 video
Lol, thanks for dialing back the clock
That thing looks locked in in fpv mode!!!
Its does pretty well.
+Nick Burns - oh damn. Why you wanna poison me to get one when my scisky is burnt! hahaha. and im mode 1 :-(
sorry. It costs more money, but you could get a devo7e in mode add the nrl24l01 module and run this little guy.
Damn. So tempting. and the shit thing is, i already got inductrix frame, upgraded motor, props, but not the RX board. hhahaha
Are you waiting for the beebrain fc?
Looks nice!
It has potential . I sure hope the deviationtx gurus can work some magic
I hope so too as I am a Deviation addict! You will understand if you have look at my channel. Lol
I see devo 10 all over the thumbnails. Lucky, I lust after a larger devo, I keep telling myself to buy one, but then I spend it all on other quad stuff. The constant what next syndrome.
Haha! Which Devo are lusting for? Devo 10 is pretty good.
Yea, Devo 10 in black. I am not a fan of white, but both our cars are white :) Is there a new devo I should look at?
I have to many problems with the e010, I only get a minute 30 before it dosen't have enough power to ful throttle forward without falling and ssme for yaw, I get to much battery sag...... using an e010 and t02 camera
has it always been this way? I ask as the battery connectors are known to wear down over time.
@@NickBurnsFPV yes, I started working on it for a buddy yesterday because he dosen't know how to solder but has seen me messing around with my whoops at work and wanted one for himself but has a low budget so I recommend getting an e010 and If solder a tx02 on it...... im using the stock 150mah batterys and only get about a min 30 before pitching forward starts drifting down even with full throttle and when moving forward and yawing I start descending even at full throttle, ive used some of my 220mah batteries to test them and they seem to help quite a bit and I get about 3 mins before having any issue, I have some bigger batterys on order to try them out
@@NickBurnsFPV its a brand new e010
@@jsfishing3813 ah I see. This was so long ago I would think some 300mah batteries might be in order. i don't recall the weight of the tx02, if over 4 grams a lighter camera might help as well.
@@NickBurnsFPV thanks, im definitely getting some batterys and a larger charger along with it...... keep up the good work! I love the channel so far! I was pretty surprised to even get a response from such an old video
What protocol is used to control? It may help to replace management.
github.com/goebish/nrf24_multipro
I don't have the equipment to find the protocol. :(
I had one of those 😊
C’mon 200k!
We shall see. I suspect its a bit of a long shot :)
nick I got the captures done today amd goebish has hacked the protocol already, i've posted a video and details in the rcg thread linked in this videos description. keep up the good work with your channel Happy|Harry from rcg
sorry it was another e010 video that had the rcg thread link, anyway here's the thread with the details of the e010 protocol on a devo ultimate7e > www.rcgroups.com/forums/showthread.php?p=35585987
Thanks. I added this information to the descriptioin. Did the shoulder button get sorted? Soulsmoke has it correct. Sticks don't click. Devo all the way.
+Nick Burns I'll be getting more captures today to get the shoulder buttons worked out, and I should have known not to trust the manual fully lol
lol. No worries, the work you all have done is fantastic and with lightning speed.
Eachine is like clone machine dude. $15? i wonder how they make profit with that.
yes, if its good it will be cloned.
You would be surprised at how cheap these actually are to make. Most stuff, especially the "tiny whoop" is vastly over priced.
Yandex neural networks have translated this video
Thank you,very interesting
Who still got this as a recommendation in 2020?
maybe for a starter, but I suspect most now fly brushless whoops.
super describe. Thanks very much
I like the cat so I gave it thumbs up.
lol, he likes to play too
Lol, FPV on that. Awesome.
yep, pretty good for stock.
Hi YT!
Thank you for the vid, just bought it!
Greet your cat and let him play with the toy ahah!
have fun. Oh the cat has hit fun....sneak attacks.
Nick Burns :D
Just to let people know I purchased the Quad air drone that is heavily advertised on you tube. It is not as advertised. It took half a battery to connect to my samsung phone. And the view was awful.
Not familiar with that quad. I presume its similar to this one in some way?
LIKE.....FROM RUSSIA))))
thanks