In engineering terms, cast iron is very useful material for high temperature applications. The key factor being its uniform crystal structure, making it very stable in variable temperature conditions. There are more stable high temperature materials out there, but cast iron provides the best cost-to-performance ratio. Downside of cast iron is... it rusts too easy. And its not a plastic material. Meaning if uneven heat is applied (lets say hot break pads are kept in contact with the disc after an emergency situation), the disc will warp. But low cost means its easier to replace the whole rotor assembly than to repair it. How ever, if there is enough material on the disc, it can be machined true on a lathe, depending availability of replacement parts.
The vanes are formed during the casting process by a part of the mold called a core. The core is typically a special type of sand that will be removed after the cast part hardens and is removed for the mold.
Everytime I see video's like this where guys have no safety glasses or hearing protection I freak out. Not to mention if they bought one good mill turn machine with sub spindle all those parts could be made in a single operation much faster and more accurately then they currently are.
@@productionmedia1400 Yea like 1/4-1/2 ton small trucks, definitely not full size, and if the hub shown in the beginning are for trucks, it would have to be specifically for 4 wheel drive units. The only way the splined drive hubs could be for the rear would be on independent rear suspension vehicles. I am a retired veteran mechanic with 70% of the work preformed on braking systems. I have worked on virtually every vehicle out there form dozens to hundreds and even thousands of times. At least vehicles driven in the USA. Those rotors look so small, they look like they belong on a small to mid-sized passenger car like a Camery or Altima. The hubs would be pressed into a sealed bearing assembly which would bolt into a spindle that the strut and lower control arm connect to. I've seen just about everything including the insane stuff when people run their crap into the ground.
@@DrHarryT Yes, you are absolutely right Of course, you are an experienced teacher. We have no experience and we only went there to make a clip. Your words are definitely correct with so much experience
@@loveofchrist5808 Your comment is nonresponsive to the topic at hand and therefore it would seem that it was intended for a different video. Hence the subject is not about gold, white or otherwise.
Poderia mostrar como são forjados ou fundidos acho que os processos de fabricação são bem proximos da fabricação de castanhs de fusos esferas para maquinas cnc gostaria de obter mais informações se possivel belo videos.
No New gloves are available in the workshop, but they become worn out over time But the workers do not throw away the gloves as long as they are usable
Дело в том, что я не специалист. Несколько человек сказали в разделе комментариев, где баланс Я не понял этот вопрос, потому что я не специалист в этой области
Your criticism is absolutely correct In fact, the safety equipment of all workers should be complete I guess it is due to the lack of attention of the workers themselves
Outros usuários também tiveram essa opinião Mas temos a certeza que esta peça pertence ao camião Claro, os discos são diferentes em caminhões diferentes Este tipo de disco pertence ao caminhão de baixa tonelagem
Все виды тормозных дисков для тяжелой техники производятся в Иране. Есть и другие типы, количество отверстий зависит от типа грузовика. Уверены, что диск - это грузовик
flies flying around no safety glasses no marked walkways no hard hats, reach around the cutter while machine running, manually wrapping the pallet. OMG, definitely not made in the usa. OSHA would shut that place down in a new york second. But that's also one of many reasons USA made stuff is more expensive.
Compliance with safety issues is one of the most important points in the industry You are right But unfortunately, most countries do not consider it necessary to use safety tools after a period of time when nothing happens to them. I am aware that in the United States, in some small and more remote cities, they do not care about these issues. This is a normal state. However, the use of safety equipment is a necessity
@@productionmedia1400 da wo ich arbeite wird GGG aus Schrott hergestellt und in der Bearbeitung sind CNC Maschinen die die Bremsscheiben nur so aus spucken
Ну и причем тут белое золото?А,понятно,это специально,для увеличения количества просмоторов!На какие только ухищрения не идут,ради привлечения подписчиков!По теме-ступицы и диски,на самый среднестатистический легковой автомобиль,а уж никак не на грузовой!Ну и техника безопастности хромает-стружку воздухом сдувает,а глаза то не защищены очками!В общем-незачет,и дизлайк.
دوست عزیز، شما فارسی فکر میکنید و انگلیسی مینویسید. کنایه، ایهام، و صنایع ادبی تو کار صنعت و مهندسی فقط دردسر درست میکند. در زبان انگلیسی فنی که اصلا و ابدا استفاده از صنایع ادبی درست نیست. در فارسی هم اینگونه صحیح نیست. لازم نیست مثل صدا و سیما گزارش بشه. اونایی که تو صدا و سیما کار میکنن دشمن فارسی صحیح هستند. برای بینندگان انگلیسیزبان قابل هضم نیست حتی اگه سعی کنید توضیح بدید.
In small workshops there are older machines But in large and branded companies, they use the latest technology and machines. The problem is that it is a bit difficult for us to enter very large companies
In most of the workshops that do not feel a danger in terms of safety over time, they do not use safety equipment. This is customary in all countries. But it is better to use safety equipment.👷
Exactly, last week it cost me to do the rotors and pads of my small suv $750 canadian. And I was lucky as I got it $250 lower than usual. Going for brand names would have cost me roughly $1400 cad!
دوست عزیز، شما فارسی فکر میکنید و انگلیسی مینویسید. کنایه، ایهام، و صنایع ادبی تو کار صنعت و مهندسی فقط دردسر درست میکند. در زبان انگلیسی فنی که اصلا و ابدا استفاده از صنایع ادبی درست نیست. در فارسی هم اینگونه صحیح نیست. لازم نیست مثل صدا و سیما گزارش بشه. اونایی که تو صدا و سیما کار میکنن دشمن فارسی صحیح هستند. برای بینندگان انگلیسیزبان قابل هضم نیست حتی اگه سعی کنید توضیح بدید. لطفا اصرار نکنید.
In engineering terms, cast iron is very useful material for high temperature applications. The key factor being its uniform crystal structure, making it very stable in variable temperature conditions. There are more stable high temperature materials out there, but cast iron provides the best cost-to-performance ratio. Downside of cast iron is... it rusts too easy. And its not a plastic material. Meaning if uneven heat is applied (lets say hot break pads are kept in contact with the disc after an emergency situation), the disc will warp. But low cost means its easier to replace the whole rotor assembly than to repair it. How ever, if there is enough material on the disc, it can be machined true on a lathe, depending availability of replacement parts.
I enjoyed your comprehensive and complete opinion
You have provided good information in this regard
Thank you sincerely
That one guy must be pretty busy, he operates every machine in the factory!
sorry
I did not understand you
where do they show how they get vanes into the disc rotors?
The vanes are cast in the rotor blanks
The vanes are formed during the casting process by a part of the mold called a core. The core is typically a special type of sand that will be removed after the cast part hardens and is removed for the mold.
We will try to show how to connect the parts in other videos in the future
Of course, if the opportunity to photograph it is provided
한국에 널린게 cnc기계 입니다 그중 최신형은 더욱 빠르고 더욱 정교하며 can과 cam , 판금,프라스틱,금속가공 기하학적 해석 프로그램과 같이 사용됩니다
ex> 마스터캠, 캐댐, 카티아 , 기타등등 여러가지 프로그램과 같이 사용됩니다
네, 맞아요
우리나라 공장에는 첨단 장치가 있습니다.
그러나 불행히도 대형 및 브랜드 공장은 사진 촬영을 쉽게 허용하지 않습니다.
앞으로 더욱 발전된 영상기기를 준비하도록 노력하겠습니다.
後半のディスクローターは重要保安部品としてダクタイル鋳鉄(DFC)を使用。加工中などで落下したら不良品として扱われます。私も或る大手企業の自動車工場🏭でディスクブレーキの加工を実習生として作業に携わった経験があるので、懐かしいですね。
素敵な思い出をお持ち帰りいただけたことをとても嬉しく思います。
ご丁寧なご意見ありがとうございます
Nicely done 👍
very interesting and enjoyable video, thank you 🙂, greetings from Germany
Hello buddy
Thank you for watching the video carefully
We are glad that you enjoyed watching the video
Для какой машины запчасти?
What country is this?
this is iran 🙏❤️
Why is the title "white gold"? Do you know in any way what white gold is???
Your words are correct
But here white gold is an allusion to a precious piece. We did not mean white gold itself
@@productionmedia1400
استفاده از
White gold
اشتباهانگیز است. چرا ساده نمیگید cast iron ؟
Everytime I see video's like this where guys have no safety glasses or hearing protection I freak out. Not to mention if they bought one good mill turn machine with sub spindle all those parts could be made in a single operation much faster and more accurately then they currently are.
You are right
The best part of you ran down your moms leg
Please tell me the location of workshop
This is a production workshop in Iran
The first part is front wheel drive hub assemblies and the second part is rotors, both likely for a small passenger car, minivan or mini SUV.
This part belongs to low tonnage trucks
@@productionmedia1400 Yea like 1/4-1/2 ton small trucks, definitely not full size, and if the hub shown in the beginning are for trucks, it would have to be specifically for 4 wheel drive units. The only way the splined drive hubs could be for the rear would be on independent rear suspension vehicles.
I am a retired veteran mechanic with 70% of the work preformed on braking systems. I have worked on virtually every vehicle out there form dozens to hundreds and even thousands of times.
At least vehicles driven in the USA.
Those rotors look so small, they look like they belong on a small to mid-sized passenger car like a Camery or Altima.
The hubs would be pressed into a sealed bearing assembly which would bolt into a spindle that the strut and lower control arm connect to.
I've seen just about everything including the insane stuff when people run their crap into the ground.
@@DrHarryT Yes, you are absolutely right
Of course, you are an experienced teacher. We have no experience and we only went there to make a clip.
Your words are definitely correct with so much experience
@@DrHarryT These are not real gold as people think valuable medals they just called it white gold for what reasons?
@@loveofchrist5808 Your comment is nonresponsive to the topic at hand and therefore it would seem that it was intended for a different video. Hence the subject is not about gold, white or otherwise.
It is good production
Yeah
It is an attractive and profitable product
Poderia mostrar como são forjados ou fundidos acho que os processos de fabricação são bem proximos da fabricação de castanhs de fusos esferas para maquinas cnc gostaria de obter mais informações se possivel belo videos.
Olá
Tomamos nota para preparar e enviar seu vídeo favorito o mais rápido possível
Se a oportunidade estiver disponível, com certeza faremos isso.
Их отличают. Чугун не куют.
Если это диски для грузовика, то я даже не могу представить размеры этого самого грузовика. Это мини грузовичечек какой-то
Ваше предположение верно
Эти диски предназначены для небольшого грузовика и небольшого тоннажа.
Tu est bête. Disque de frein
攻牙何倒角分享
不幸的是，我不明白你的意思
Beautiful 😍 machine
Thank you for your kind opinion 🙏❤️
So good tanx
We are glad that you liked it
Для микро грузовика?
Вони призначені для невеликих вантажівок
Вони трохи більші за пікап
как вы балансируете тормозные диски ,это ведь самое главное
Да
Ты прав
all wearing brand-new gloves?
No
New gloves are available in the workshop, but they become worn out over time
But the workers do not throw away the gloves as long as they are usable
這叫作車牙齒，一家公司叫豪科技公司
很高兴您在这项技术工作中拥有技能和知识
А фрезеровка это фикция, что диск балансировали?
Ну да, кто проверит-то? А ступицы после протяжки так сыромятиной и поедут к заказчику....потом народ это купит...
Извиняюсь
не поняла вашего вопроса
9:11 Very good a woman working in this farm. But it would be much better WITHOUT VEIL. 💙💙💙💙
peace be upon you
I agree with you . But here hijab is optional and some women believe in hijab
I think personal matters is none of your or mine business. Simple.
Superb ... #SaurabhAnupamSahu
Thank you for your kind opinion 🙏
Где балансировка?
Там же и где ТБ
Дело в том, что я не специалист.
Несколько человек сказали в разделе комментариев, где баланс
Я не понял этот вопрос, потому что я не специалист в этой области
Судя по отсутствию у рабочих корпоративной спецодежды диск изготовлен из белого гамна .
ты прав
Здесь слово белое золото является намеком на драгоценный и ценный материал.
Мы не имеем в виду само белое золото
Where is the gold?
The man at the 4:46 minute mark is blasting a mist with compressed air and he’s not wearing a mask or safety glasses. Not good.
Your criticism is absolutely correct
In fact, the safety equipment of all workers should be complete
I guess it is due to the lack of attention of the workers themselves
Isso e usinagem de cubo de roda e disco de carro de passeio, não e caminhão.
Outros usuários também tiveram essa opinião
Mas temos a certeza que esta peça pertence ao camião
Claro, os discos são diferentes em caminhões diferentes
Este tipo de disco pertence ao caminhão de baixa tonelagem
parábens pelo trabalho perfeito.
obrigada
Ficamos muito felizes que esteja satisfeito
А балансировка где
Привет
Мы не поняли, что вы имели в виду
Пожалуйста, объясните немного
Nice
Thanks 🙏
@@productionmedia1400 your country name
@@h-S-368 iran
i am from pakistan
@@h-S-368 I'm happy to meet you
Pakistan is a good country and there are many people from Pakistan on TH-cam.
mas que mentira, sao feitos de aço
Sim
São peças de ferro fundido
Mas aqui o ouro branco faz alusão a uma peça preciosa
Это передний диск Peugeot 308.
Это не пежо дисковые тормоза, а для легких грузовиков
Маленькие грузовики
White gold? Highly unlikely!
you guessed right
It is not white gold. By white gold, we mean a precious and valuable piece
nao e feito de ouro branco,e feito "com"ouro branco industrial
Nós quisemos dizer exatamente o que você entendeu
Saudações a você que é muito inteligente
جيد جدا
شكرا لك
Диск для грузовика не держится на 4-х шпильках на ступице.... это диск на легковушку весом 1.5-2 тонны
Все виды тормозных дисков для тяжелой техники производятся в Иране.
Есть и другие типы, количество отверстий зависит от типа грузовика.
Уверены, что диск - это грузовик
flies flying around no safety glasses no marked walkways no hard hats, reach around the cutter while machine running, manually wrapping the pallet. OMG, definitely not made in the usa. OSHA would shut that place down in a new york second. But that's also one of many reasons USA made stuff is more expensive.
Compliance with safety issues is one of the most important points in the industry
You are right
But unfortunately, most countries do not consider it necessary to use safety tools after a period of time when nothing happens to them.
I am aware that in the United States, in some small and more remote cities, they do not care about these issues.
This is a normal state.
However, the use of safety equipment is a necessity
How else do you expect the price to be 20 bucks a rotor?
Well the US does its dirty productions in China. A little bit of hypocrisy I would say.
Wegen der unsinnigen Überschrift gibt es von mir einen Daumen nach unten.
genau seit wann ist GGG Weißgold
Weißgold ist hier eine Anspielung auf ein wertvolles Stück
Weißgold ist hier eine Anspielung auf ein wertvolles Stück
@@productionmedia1400 da wo ich arbeite wird GGG aus Schrott hergestellt und in der Bearbeitung sind CNC Maschinen die die Bremsscheiben nur so aus spucken
👍👍👏🏻👏🏻
thank you
Ну и причем тут белое золото?А,понятно,это специально,для увеличения количества просмоторов!На какие только ухищрения не идут,ради привлечения подписчиков!По теме-ступицы и диски,на самый среднестатистический легковой автомобиль,а уж никак не на грузовой!Ну и техника безопастности хромает-стружку воздухом сдувает,а глаза то не защищены очками!В общем-незачет,и дизлайк.
Белое золото здесь намек на ценный предмет
Мы не имеем в виду само золото
Дело в том, что этот диск для малотоннажных грузовиков
Lig derrrrrT
Saçma bir başlık.
Beyaz altından bahsediyorsanız, beyaz altının değerli bir metal anlamına geldiğini bilmelisiniz.
@@productionmedia1400 ben sektör dışından bir insanım. Bana garip geliyor. Keşke metal sektörü deyip belirtseydiniz.
دوست عزیز، شما فارسی فکر میکنید و انگلیسی مینویسید. کنایه، ایهام، و صنایع ادبی تو کار صنعت و مهندسی فقط دردسر درست میکند. در زبان انگلیسی فنی که اصلا و ابدا استفاده از صنایع ادبی درست نیست. در فارسی هم اینگونه صحیح نیست. لازم نیست مثل صدا و سیما گزارش بشه. اونایی که تو صدا و سیما کار میکنن دشمن فارسی صحیح هستند. برای بینندگان انگلیسیزبان قابل هضم نیست حتی اگه سعی کنید توضیح بدید.
Sweat shop
it's true
There is a sweat shop, but it is rose leaf sweat
#MahabalMachines
Natutuwa akong nagustuhan mo ang video at ito ay tungkol sa iyong larangan ng kadalubhasaan
IRAN ❤️
Stoneage tec
In small workshops there are older machines
But in large and branded companies, they use the latest technology and machines.
The problem is that it is a bit difficult for us to enter very large companies
sUpEr
Thank you for your kind opinion
Was für ein Mist! Das ist kein Kanal aus Deutschland.
Hallo
Darf ich wissen, warum dir das Video nicht gefallen hat?
where is the eye glasses and ear plug ....safety is zero in this place
In most of the workshops that do not feel a danger in terms of safety over time, they do not use safety equipment.
This is customary in all countries.
But it is better to use safety equipment.👷
Oh look we found the Karen of commenters.
Truck disk breaks? They look like they belong to a car. Trucks need larger ones.
We have no doubt that these are truck brake discs
MACHINE 🗜️📡💻
💪 CURLHOT JAMES
최소한의 안전장치조차 지급하지않는 막장기업
사실은 회사에서 안전 장비를 사용할 수 있다는 것입니다.
우리는 모든 안전 장치를 자세히 보았습니다.
그러나 작업자는 이 도구를 사용하기에는 너무 게을러요
Third world countries were life is cheap and plentiful
Your opinion is respected
Exactly, last week it cost me to do the rotors and pads of my small suv $750 canadian. And I was lucky as I got it $250 lower than usual. Going for brand names would have cost me roughly $1400 cad!
Weißgold?! Bremsscheiben? Dann bis du sicher aus Gelbgold
Sie haben Recht
In unserem Satz bedeutet Weißgold ein wertvolles Stück
Hier ist das Weißgold eine Anspielung auf den Wert dieses Stücks Gusseisen
طلا سفید؟!
طلای سفید اینجا کنایه به ارزشمند بودن این قطعه اس
دوست عزیز، شما فارسی فکر میکنید و انگلیسی مینویسید. کنایه، ایهام، و صنایع ادبی تو کار صنعت و مهندسی فقط دردسر درست میکند. در زبان انگلیسی فنی که اصلا و ابدا استفاده از صنایع ادبی درست نیست. در فارسی هم اینگونه صحیح نیست. لازم نیست مثل صدا و سیما گزارش بشه. اونایی که تو صدا و سیما کار میکنن دشمن فارسی صحیح هستند. برای بینندگان انگلیسیزبان قابل هضم نیست حتی اگه سعی کنید توضیح بدید. لطفا اصرار نکنید.