The tools and parts used in the video are linked in the video description. If this video was helpful, please hit the like button and feel free to share the video to others!
Thank you , we just purchased a new Flagstaff rv .I looked under bathroom room sink I found a small water leak while testing out rv functions. I would advise anyone don't assume just because it's brand new everything is working properly. Check it out before you take your rv out camping. Great video.
PERFECT! Thank you for this comprehensive video and the links to the tools etc. I bought the tool and a couple things from Amazon and I got the brass connectors at Lowes for less than Amazon and Home Depot.
Great thanks, just returned a Sharkbite crimper to Lowes 65.00 it was defective. I returned it and got the one you recommend thanks you saved me money!
Wish I saw this before I went to Lowe’s at 8:40 and not stuck without some of the things I should have got. Looming at the set up I wish all these could flex or bend and also screw on so it’s easy to take it off. I’m pulling the T off and can’t get one off. I can’t cut the pipe because I don’t have extra pipe. To your 9pm comment, yep nothing happens during the weekend or day. Only 29° on a weekend and before you are to leave one location.
@@FollowingtheFitchs FYI.. I have a 2018 jayco travel trailer (18ft) I bought used on Craigslist last year. Noticed a water leak near the water heater on the 2nd camping trip last November and again in December. Those darn 90 degree 1/2 plastic adaptors from the cold water line from the water heater was the culprit. So I replaced both cold and hot adaptors to brass from Home Depot - no leaks now after testing for a few hours. I do recommend purchasing a dedicated crimp removal tool - it saved me hours of work. For anyone purchasing an RV/Trailer used for the first time - check your trailer for water leaks!
Good video! I’m here looking because of a drip off a fitting on a Nautilus P-1 system! It’s the system in newer campers an they are a fking nightmare of lines an hoses that you aren’t getting a crisper in! I think going to cut the metal crimp off an put a hose clamp on. Thanks! Bob
@@FollowingtheFitchs Yes an it’s all soft hose an the Winters an freezing in Winters here in Upper Michigan are Not good for These plastic fitting! They leak an when try to tighten fitting they crack an break! Then trying to get parts is even worse. RV dealers don’t want to sell parts they want you to bring RV an charge 100. $ an hr to fix them?
Hahaha I'm already freaking out! Bought a 22 year old Class B+. Somewhere there's a leak around the fresh water tank. Gotta find it. It's all winterized at this moment. But not sure how one finds a leak when your water tanks are EMPTY? Meantime this is a good video for making sure you have the right materials and tools in advance of repair work and also thinking ahead for those on the road problems. My little 22' RV has very little storage. No way is it going to hold those large rolls of plastic tubing. But I've already started a material kit to keep on hand and on the road. Like toilet valves and gaskets and so tubing is going into it tool Along with the appropriate tools like the crimping tool. I may have to borrow my husbands...that's not going to go over well. Now if I can just get my husband to come along too and bring that tool. Yeah after 51 years of marriage and his lack of enthusiasm for camping. He's not changing me nor I him and we get along fine this way. I'm the camper. And oh that's why when I see how much STRENGTH for that MAN SIZE Crimping tool...I'll figure it out if need be. I've never owned an RV of any kind and never camp in those fancy campgrounds with water and power. So I'm actually searching on how to fill your tank without a city hose with pressure. It's a little confusing. I'm saving this link however for future refreshing course on how to make repairs. Thanks for your good tutorials.
Thanks for this video, it was very informative. I've seen you fix things for other people. Again keep up the good videos. Looking forward to your next informative video.
I’m an rv tech. People can save lots of money by keeping these supplies on hand. For the cost of one service call and repair could create an emergency toolbox to do your own repairs, if you’re comfortable doing it yourself.
Absolutely. I'm basically broke so I do the repairs myself. It's definitely intimidating but usually I end up surprised how easy things tend to be. Idk why I'm still surprised at this point lol
@tomstrickland5504 do you mean the screw clamps? They are not rated for or strong enough to clamp the hard line PEX. Good for the braided vinyl but not PEX
Replacing my kitchen faucet on Friday. It’s leaking. Adding shut off also. PEX is so easy to use you are right. The hardest part is just being able to get to the lines under the faucet. No access panels at all and it’s out of reach. Going to have to get creative with this repair. Thanks for the video Fitch.
I have a leak way back behind the toilet and shower. I don't know how to fix it. It's a brand new Rockwood mini light. Got it last year? It's leaks now,
I'm frustrated... We had a leak and I watched videos such as this one and the replacement of the nylon fittings with the sharkbite fittings. Despite torqueing down those fittings onto the existing plastic manifold on the back of the nautilus P4, the one spot is leaking even more with the sharkbite. Are sharkbite with 1/2" npt truly compatible with the garbage plastic on the manifold?
do the swivel fittings fit onto a special fitting or just normal pipe threads. I am making a water filter in the camper and coming out of the filter with a 3/4 to 1/2 brass pipe reducer. with the swivel adapter screw onto that or do I need a special male piece to screw onto. Good Video by the way
I have a leak at the connection to the rv hot water heater. It is a 90 degree elbow to pex. Do you know what size the tank thread is? Are they typical in size? 3/4"? 2021 Keystone hideout
Most of the pex in RV’s is 1/2” pex. Actually, I’ve never seen any that are not 1/2”. The lines connecting to my water heater tank are 1/2” pex. I’d bet yours are as well.
I’m looking at the shark bite equipment. In your personal opinion is there any advantage between the clamp style vs. push on style of the shark bite fittings?
I think an advantage to the push on style is that you don’t need a special tool to put them on. You do need a special tool to remove them, though. Luckily it is a really inexpensive tool. The push on can be used it tight spaces where the crimp tool won’t fit. The push on are more expensive. The push on only work with the hard pex line like I showed in this video. For the flex line, you would need to use the crimp style. Thanks for watching!
Yep. If you have the hard pex line you can use the push on style shut off. You wouldn’t want to use the push on syle with flexible tubing though. Make sure you get the little horseshoe looking tool that is needed to remove them in case you ever need to.
@@FollowingtheFitchs ok your reffering to the pvc with nylon hose thats the one leaking in my toilet. Im gonna try to use a steel brades line. Thanks for the reply
I had one fitting on the flexible hose leak. It was not due to the hose or crimp, though, the seal inside the fitting got brittle. I used the regular crimp style one to fix it. I think this is one of those topics where if you ask 10 people and you’ll get 10 different answers. I can tell you I have never had a leak due to a crimped flexible hose. Hope this helps! Thanks for watching and commenting!
Great, straight forward and precise video. Thank you for this video, really appreciate your knowledge!! And the parts list for amazon was also a time saver!
Question. At the end you mentioned the flex line under your sink. I believe that is what was used for my hot and cold water connection to the bathroom facet, not pex. They used the crimp connectors on that, is that proper or should I replace them with worm gear clamps? Both are leaking right now and need repair.
There’s an ongoing debate about that. If it were mine, I would use the crimp style. If you put the worm gear style clamp on, I would definitely use a brass fitting.
Dave, thanks for the nice video. It all looks very easy when you're working on the countertop demonstrating things but when I look in my water pump compartment there's no way I can get a big tool in there to crimp things. Could you demonstrate how to work in tight spaces where you have to use a crimping tool?
That’s definitely the toughest part. What I ended up doing was cutting the pex line in an area (that wasn’t broken) where I knew I could use the tool. Then I crimped the parts together out in the open and put it back in place. Then re-crimped the one I could get to with the tool. I know it sounds crazy cutting a part that was not broken just to fix one that was, but given the small workspace, that was the easiest thing to do. If you look at our video from November at Mohican State Park, I fixed a leak on that trip. If I remember correctly, I think I may have mentioned that I had to remove “good” parts to get to the broken one. It’s about mid way through the video. Thanks for watching!
If it’s normal pex line, yes. Sharkbite makes the push on style and also crimp style. I used the Sharkbite crimp style. If you use the push on style, make sure you buy the small horseshoe shaped tool that is needed to remove them just in case you would ever need to do that. There are links to all the parts I used in the video description too.
I changed our kitchen faucet to a residential one. It had 3/8” compression fittings. I got the 3/8” compression to 1/2” adapters. It works great. I also recommend adding a shut off valve too. This would be useful if you ever needed to shut off water to a certain area but still needed water in the rest of the RV.
If you look in the description of this video there are Amazon links to nearly all the tools and parts in this video. I store all of them in an 11 compartment Milwaukee Packout box. The links are a better solution due to shipping. Thanks for watching!
The breed is Australian Cattle Dog. Most people refer to them as a “blue heeler” They are herding dogs. There are red heelers as well. Wade is our 2nd one we’ve had and Andrea’s 3rd one.
Dave carries those big rolls of pex because that is smallest roll that you can buy. If anyone knows where to get a practical length to have on hand please post a reference. 😆👍
I noticed the PEX you carry with you is in coils. Is that PEX A, or PEX B. My understanding is that most, if not all, PEX in RV's is PEX B. Am I missing something? Otherwise, very helpful video. Thanks.
You need to use red for the hot side as its made for hot water and the blue is not, that's why red is more expensive then blue. Sure you could use blue in a pinch but you should change it out to red if its the hot side.
DO NOT USE A BOX KNIFE WITH PLASTIC FITTINGS! While completely changing out a plumbing system on a motorhome, I kept changing my mind how I would want a line set ran. I would cut the line with a box knife so as to be able to reuse the fitting. Long story shortened, every one of the fittings I used a knife to cut the pex pipe loose, leaked. What I learned before I pressure tested was if I needed to remove a fitting, was to use a heat gun and just heat the end of the pipe for just a minute or less. The fitting, whether it be plastic or brass would slide right out and thus I saved the pipe and fitting. Just let the pipe cool off for a few minutes and then reinsert your fitting and clamp with a new crimp clamp. It was only after all this though I discovered my leaks which were caused by the knife even though I would swear I never touched the fitting with the knife. No other fittings leaked, even the ones I took apart and reassembled using a heat gun.
I think you missed the point. I wouldn’t cheap out and reuse a plastic fitting at all. That’s why I have the brass replacements and carry them with me in the camper. What I was saying is if you are in a pinch during a trip and need to fix a leak with the tools you may have on hand, you could use a knife to slowly score the line. Most people don’t carry a heat gun around with them (I carry the Milwaukee M18 one) but they likely do have a knife and it can be used in the manner I mentioned in the video without issue.
@@TheBibleListener side note, I bought a dual sport at the end of last year. Just took the motorcycle endorsement test. I shot some video of the steps to pass here in Ohio.
You obviously didn’t watch the video. I explained where to look for leaks, which is actually a bonus since the title of the video is “how to FIX a water leak in an RV”, and not where to find them. Finding them is easy, look for water where it normally shouldn’t be. Ughhh is right, but the 20,000+ other people that watched this video seemed to get it right.
The tools and parts used in the video are linked in the video description. If this video was helpful, please hit the like button and feel free to share the video to others!
Every single piece of information here is spot on 100% accurate. Ive lived in my motorhome for 4 yrs now and ......listen to this guy.
Thanks for watching!
Thank you , we just purchased a new Flagstaff rv .I looked under bathroom room sink I found a small water leak while testing out rv functions. I would advise anyone don't assume just because it's brand new everything is working properly. Check it out before you take your rv out camping. Great video.
Thanks for watching!
To remove the pex band I purchased a Drexel tool and used a cutoff blade cut the band and removed removed in less than a minute.
That certainly works. I was more so trying to show how to remove it with tools most people are likely to have with them while camping.
PERFECT! Thank you for this comprehensive video and the links to the tools etc. I bought the tool and a couple things from Amazon and I got the brass connectors at Lowes for less than Amazon and Home Depot.
Glad it was helpful! Thanks for watching and commenting!
Great thanks, just returned a Sharkbite crimper to Lowes 65.00 it was defective. I returned it and got the one you recommend thanks you saved me money!
Glad it helped you out! I’ve used it about 10 times on different projects and other people’s campers. It has worked great every time !
Thanks again for the video. This is my first video with you great advice
No problem! I hope some of the info was useful!
Great explanation of what I need to do to fix a leak as well as which tools to buy! Thanks!
No problem! Hope it helps!
Wish I saw this before I went to Lowe’s at 8:40 and not stuck without some of the things I should have got. Looming at the set up I wish all these could flex or bend and also screw on so it’s easy to take it off. I’m pulling the T off and can’t get one off. I can’t cut the pipe because I don’t have extra pipe. To your 9pm comment, yep nothing happens during the weekend or day. Only 29° on a weekend and before you are to leave one location.
Stuff always happens at the worst times! Hang in there! Thanks for watching!
Man, that sure is a fancy kitchen faucet you got there.
thanks! It’s the F.O.T.P. edition.
I've never worked with this stuff before. Thanks for de-mystifying it.
Once you get an idea of where the leak is and what you need to fix it, it’s not so bad! Thanks for watching!
Thanks! This helps a lot. It's a year after you posted the video but it's Spring again and leak season.
Thanks for watching!
Thank you! This is a great informative video to help me repair my water leak on my Jayco travel trailer
Glad to hear it helped out! Thanks for watching!
@@FollowingtheFitchs FYI.. I have a 2018 jayco travel trailer (18ft) I bought used on Craigslist last year. Noticed a water leak near the water heater on the 2nd camping trip last November and again in December. Those darn 90 degree 1/2 plastic adaptors from the cold water line from the water heater was the culprit. So I replaced both cold and hot adaptors to brass from Home Depot - no leaks now after testing for a few hours. I do recommend purchasing a dedicated crimp removal tool - it saved me hours of work. For anyone purchasing an RV/Trailer used for the first time - check your trailer for water leaks!
Great video! Any chance I can send you a video to get your advice?
Sure. No problem. followingthefitchs@gmail.com
Just caught this today! So helpful. Thanks Dave. You are so good at all of this. Hope all your camping trips this season are going well.
Thanks, Duane! We’ve had some pretty good trips this summer!
Crimped pex always leek in my experience.. the plastic screw on pecies work for me
Great video Mr. Fitch I’ll defiantly save this video in case I ever have a water problem. Keep this type of video coming
Thanks, Uno!
Great explanation guy , very nice RV
Thanks! Hopefully it helps a few people.
Great informative video. We also had a leak at our pump once and ever since I have all the tools, fittings, and a section of pex pipe on hand.
It’s always a good idea to have a few spare items! Thanks for watching. I hope you’re doing well!
@@FollowingtheFitchs Doing we’ll here. Hope all is well on your end also.
Thank you so much. Headed to the store with your handy dandy information written down. Happy Camping to you.
Awesome to hear this! When I shot this video I was hoping the info would help someone! Thanks for watching!
Good video! I’m here looking because of a drip off a fitting on a Nautilus P-1 system! It’s the system in newer campers an they are a fking nightmare of lines an hoses that you aren’t getting a crisper in! I think going to cut the metal crimp off an put a hose clamp on. Thanks! Bob
Thanks for watching! It’s crazy how many lines and wires are behind those panels!
@@FollowingtheFitchs Yes an it’s all soft hose an the Winters an freezing in Winters here in Upper Michigan are Not good for These plastic fitting! They leak an when try to tighten fitting they crack an break! Then trying to get parts is even worse. RV dealers don’t want to sell parts they want you to bring RV an charge 100. $ an hr to fix them?
I'm a big fan of PEX. I used it to plumb the cabin and use it for any repairs at the house. Nice job.
Thank you sir!
Thank you for the video. Blessings to you.
No problem! Thanks for watching!
Thank you I have two leaks so just need to have everything first so I’m not overwhelmed. ☮️
Hahaha I'm already freaking out! Bought a 22 year old Class B+. Somewhere there's a leak around the fresh water tank. Gotta find it. It's all winterized at this moment. But not sure how one finds a leak when your water tanks are EMPTY? Meantime this is a good video for making sure you have the right materials and tools in advance of repair work and also thinking ahead for those on the road problems. My little 22' RV has very little storage. No way is it going to hold those large rolls of plastic tubing. But I've already started a material kit to keep on hand and on the road. Like toilet valves and gaskets and so tubing is going into it tool Along with the appropriate tools like the crimping tool. I may have to borrow my husbands...that's not going to go over well. Now if I can just get my husband to come along too and bring that tool. Yeah after 51 years of marriage and his lack of enthusiasm for camping. He's not changing me nor I him and we get along fine this way. I'm the camper. And oh that's why when I see how much STRENGTH for that MAN SIZE Crimping tool...I'll figure it out if need be. I've never owned an RV of any kind and never camp in those fancy campgrounds with water and power. So I'm actually searching on how to fill your tank without a city hose with pressure. It's a little confusing. I'm saving this link however for future refreshing course on how to make repairs. Thanks for your good tutorials.
Nice job Dave!! Hi Andrea!!
We hope to see you soon!
Going to order these things so I will be ready
Perfect! It always great to have a few things that could save the trip! Thanks for watching and commenting!
Thanks Dave! Saving this video for future reference! I’m sure I will need to refer back to it at some point.
Having a few spare parts has saved us a couple times!
Thanks for the info David, very informative.
Thanks for watching!
Thanks for this video, it was very informative. I've seen you fix things for other people. Again keep up the good videos. Looking forward to your next informative video.
Thanks so much for watching! I hope this info helps someone one of these days!
I’m an rv tech. People can save lots of money by keeping these supplies on hand. For the cost of one service call and repair could create an emergency toolbox to do your own repairs, if you’re comfortable doing it yourself.
For sure. In reality, I think a lot of the fixes are pretty minor. I think people are just intimidated to roll up their sleeves and tackle it.
Absolutely. I'm basically broke so I do the repairs myself. It's definitely intimidating but usually I end up surprised how easy things tend to be. Idk why I'm still surprised at this point lol
Why not use standard hose clamp??thanks
@tomstrickland5504 do you mean the screw clamps? They are not rated for or strong enough to clamp the hard line PEX. Good for the braided vinyl but not PEX
@@hobbyguy79 no sir, pex crimp clamps.
Good video ...thank God for Pex
Thanks so much for watching!
Fantastic information, Thank You so much!!
Thanks for watching!
Replacing my kitchen faucet on Friday. It’s leaking. Adding shut off also. PEX is so easy to use you are right. The hardest part is just being able to get to the lines under the faucet. No access panels at all and it’s out of reach. Going to have to get creative with this repair. Thanks for the video Fitch.
I would definitely add shut offs!
I have a leak way back behind the toilet and shower. I don't know how to fix it. It's a brand new Rockwood mini light. Got it last year? It's leaks now,
Good video Dave👍
Thank you sir!
Well done!
Thank you!
Great information Dave!
Thanks!
I'm frustrated... We had a leak and I watched videos such as this one and the replacement of the nylon fittings with the sharkbite fittings. Despite torqueing down those fittings onto the existing plastic manifold on the back of the nautilus P4, the one spot is leaking even more with the sharkbite. Are sharkbite with 1/2" npt truly compatible with the garbage plastic on the manifold?
Is the water line you are crimping the hard pex line or is it the flexible tubing?
do the swivel fittings fit onto a special fitting or just normal pipe threads. I am making a water filter in the camper and coming out of the filter with a 3/4 to 1/2 brass pipe reducer. with the swivel adapter screw onto that or do I need a special male piece to screw onto. Good Video by the way
The swivels in this video will thread onto normal 1/2” threads. They are made to connect to the water pump, back side of faucets, etc. thanks!
I have a leak at the connection to the rv hot water heater. It is a 90 degree elbow to pex. Do you know what size the tank thread is? Are they typical in size? 3/4"? 2021 Keystone hideout
Most of the pex in RV’s is 1/2” pex. Actually, I’ve never seen any that are not 1/2”. The lines connecting to my water heater tank are 1/2” pex. I’d bet yours are as well.
Great video Dave! Im thinking about replacing our bathroom faucet and possibly putting a larger sink bowl in our Imagine.
Thanks!!
Sounds like a nice update! I keep talking about putting in a taller faucet in ours. Thanks for watching!
Great video. Thanks.
Thank you so much!
I’m looking at the shark bite equipment. In your personal opinion is there any advantage between the clamp style vs. push on style of the shark bite fittings?
I think an advantage to the push on style is that you don’t need a special tool to put them on. You do need a special tool to remove them, though. Luckily it is a really inexpensive tool. The push on can be used it tight spaces where the crimp tool won’t fit. The push on are more expensive. The push on only work with the hard pex line like I showed in this video. For the flex line, you would need to use the crimp style.
Thanks for watching!
Can you add the shut off valves that you just press the pex lines in to. From sharkbite or do you have to actually clamp them with the tool?
Yep. If you have the hard pex line you can use the push on style shut off. You wouldn’t want to use the push on syle with flexible tubing though. Make sure you get the little horseshoe looking tool that is needed to remove them in case you ever need to.
@@FollowingtheFitchs By hard PEX your reffering to the stuff you have 2 rolls of right?
Correct. There is a type of flexible tubing used in rv’s too and some people call it pex as well.
@@FollowingtheFitchs ok your reffering to the pvc with nylon hose thats the one leaking in my toilet. Im gonna try to use a steel brades line. Thanks for the reply
I don’t think you mentioned it but what do you use to clamp the flexible braided hose in your RV?
I had one fitting on the flexible hose leak. It was not due to the hose or crimp, though, the seal inside the fitting got brittle. I used the regular crimp style one to fix it. I think this is one of those topics where if you ask 10 people and you’ll get 10 different answers. I can tell you I have never had a leak due to a crimped flexible hose. Hope this helps! Thanks for watching and commenting!
Great, straight forward and precise video. Thank you for this video, really appreciate your knowledge!! And the parts list for amazon was also a time saver!
Glad to hear it helped out! Thanks for watching!
Question. At the end you mentioned the flex line under your sink. I believe that is what was used for my hot and cold water connection to the bathroom facet, not pex. They used the crimp connectors on that, is that proper or should I replace them with worm gear clamps? Both are leaking right now and need repair.
There’s an ongoing debate about that. If it were mine, I would use the crimp style. If you put the worm gear style clamp on, I would definitely use a brass fitting.
Also, while you’re fixing it, it would be a good idea to go ahead and put a shutoff valve on each line.
Why do you recommend in your parts links the no crimp type swivel elbow and swivel adaptor but the other brass fittings are the crimp type?
I didn’t. All the links are for the crimp style parts.
That tool you are using is made to cut the bands off too
Hope if it hits the fan you’re nearby. Very wise to have tools and parts just in case. 👍🏿
I’m just a phone call away!
Don't worry Chuck just make sure you camping with the right people as they will have you covered!👍
Dave, thanks for the nice video. It all looks very easy when you're working on the countertop demonstrating things but when I look in my water pump compartment there's no way I can get a big tool in there to crimp things. Could you demonstrate how to work in tight spaces where you have to use a crimping tool?
That’s definitely the toughest part. What I ended up doing was cutting the pex line in an area (that wasn’t broken) where I knew I could use the tool. Then I crimped the parts together out in the open and put it back in place. Then re-crimped the one I could get to with the tool. I know it sounds crazy cutting a part that was not broken just to fix one that was, but given the small workspace, that was the easiest thing to do. If you look at our video from November at Mohican State Park, I fixed a leak on that trip. If I remember correctly, I think I may have mentioned that I had to remove “good” parts to get to the broken one. It’s about mid way through the video. Thanks for watching!
Thanks for the reply. Is it safe to use shark bite fittings or compression fittings on RV plumbing?
If it’s normal pex line, yes. Sharkbite makes the push on style and also crimp style. I used the Sharkbite crimp style. If you use the push on style, make sure you buy the small horseshoe shaped tool that is needed to remove them just in case you would ever need to do that. There are links to all the parts I used in the video description too.
I changed our kitchen faucet to a residential one. It had 3/8” compression fittings. I got the 3/8” compression to 1/2” adapters. It works great. I also recommend adding a shut off valve too. This would be useful if you ever needed to shut off water to a certain area but still needed water in the rest of the RV.
Thanks so much. Great video. Which me luck !
Why not brass elbows?
I used brass on the parts I replaced.
Great video Thank you 👍
Would you consider making up and selling (for a profit of course + S&H) a PEX repair kit with all the Items you carry?
If you look in the description of this video there are Amazon links to nearly all the tools and parts in this video. I store all of them in an 11 compartment Milwaukee Packout box. The links are a better solution due to shipping.
Thanks for watching!
Off subject, what breed of dog is wade? He is gorgeous
The breed is Australian Cattle Dog. Most people refer to them as a “blue heeler” They are herding dogs. There are red heelers as well. Wade is our 2nd one we’ve had and Andrea’s 3rd one.
@@FollowingtheFitchs we had a Queensland Heeler he was a great dog
They are great dogs!
Thanks
Thanks for watching!
Dave carries those big rolls of pex because that is smallest roll that you can buy. If anyone knows where to get a practical length to have on hand please post a reference. 😆👍
You can get a 5' section at Home Depot for about $3.
@@FollowingtheFitchs Thank You for that info! 👍
Excellent video and thanks for the link to buy the crimping tool. I tried taking off a clamp with side cutters and it is impossible.
Glad it helped! Thanks for watching!
Under my kitchen sink on a brand new rv leaks. I tried to wrap it with plumbers tape and reefed it down, still slightly leaks. Ive given up lol
A lot of the fittings have the rubber crush seal in them. Plumbers tape usually will not work on those.
@@FollowingtheFitchs i got it to work. I had to get wrenches out and go midevil on it. No leaking now
Great video. My only disappointment is I didn’t see any Milwaukee tools at all. Not even an M12 battery in the background.
Oh they’re always around! There was a Snap-On screwdriver though!
I noticed the PEX you carry with you is in coils. Is that PEX A, or PEX B. My understanding is that most, if not all, PEX in RV's is PEX B. Am I missing something? Otherwise, very helpful video. Thanks.
It’s B.
Roger that. I have never seen PEX B in coils, only sticks. Thanks. @@FollowingtheFitchs
@davidjackman5773 no problem! I picked up the roll at Home Depot.
Hey Dave it’s me Lauren my mom is a vet dr.Mann my mom works there Andrea how’s wade
Hi Lauren it’s Andrea!!
Is it pex c?
No, it is PEX B.
BUT WHAT ABOUT LEEKS IN A 5 WHEELER
It should be similar to what is explained in this video.
You need to use red for the hot side as its made for hot water and the blue is not, that's why red is more expensive then blue. Sure you could use blue in a pinch but you should change it out to red if its the hot side.
Sure
I could’ve use this video a few weeks ago 🤣 JK great info.. anyone with a camper is gonna need to do this probably sooner then later
Haha! I thought of you while I was shooting it! Yes, sooner or later stuff will need a repair!
Like I asked, would you be willing to make me up a kit (for a profit of course), that I could keep in case of emergency????
DO NOT USE A BOX KNIFE WITH PLASTIC FITTINGS! While completely changing out a plumbing system on a motorhome, I kept changing my mind how I would want a line set ran. I would cut the line with a box knife so as to be able to reuse the fitting. Long story shortened, every one of the fittings I used a knife to cut the pex pipe loose, leaked. What I learned before I pressure tested was if I needed to remove a fitting, was to use a heat gun and just heat the end of the pipe for just a minute or less. The fitting, whether it be plastic or brass would slide right out and thus I saved the pipe and fitting. Just let the pipe cool off for a few minutes and then reinsert your fitting and clamp with a new crimp clamp. It was only after all this though I discovered my leaks which were caused by the knife even though I would swear I never touched the fitting with the knife. No other fittings leaked, even the ones I took apart and reassembled using a heat gun.
I think you missed the point. I wouldn’t cheap out and reuse a plastic fitting at all. That’s why I have the brass replacements and carry them with me in the camper. What I was saying is if you are in a pinch during a trip and need to fix a leak with the tools you may have on hand, you could use a knife to slowly score the line. Most people don’t carry a heat gun around with them (I carry the Milwaukee M18 one) but they likely do have a knife and it can be used in the manner I mentioned in the video without issue.
PARDON
Geez almost need to just tow a parts camper full of tools behind your main camper while you go on vacation!😂
nah, other than the rolls of pex line, all of that fits into 1 Milwaukee Packout box.
Its sad brand news ones will be leaking..im having the problem after having it 1 month lol
That sucks, especially with a brand new camper. The folks actually building them definitely do not take pride in their work.
@@FollowingtheFitchs i know. They have such a Grand Design :D lol
@@TheBibleListener side note, I bought a dual sport at the end of last year. Just took the motorcycle endorsement test. I shot some video of the steps to pass here in Ohio.
Hmmm… i suspect you’ve spent a bit of time underwater. In a submarine, specifically.
Terrible. Not showing anywhere the leaks are and how to find them. Ughhh
You obviously didn’t watch the video. I explained where to look for leaks, which is actually a bonus since the title of the video is “how to FIX a water leak in an RV”, and not where to find them. Finding them is easy, look for water where it normally shouldn’t be.
Ughhh is right, but the 20,000+ other people that watched this video seemed to get it right.