Me and the wife are planning on 427 chevy swapping a '64 sedan Deville were planning to save ! But still not as cool as a race boat engine in the cruella Deville! ( aka fins caddy ) lol
Those bolts and nuts guys are killing it. One of those things that once you see it you wonder why it didn’t exist already and they’re hooking up with all the right TH-camrs.
Its existed for years. We've used Fastenal and Lawson. They literally do the same thing. Heck the rep will stop by once a week and refill them for you if you choose. You too can get the nut and bolt setup shown here for $12,223.91 plus shipping.
@@TravelingStacker still better deal than both companies you listed I used all 3 regularly for awhile at work and the nuts and bolts are the people to go with if you want the best hardware for your money and by far the easiest to use
There's been like a half a dozen of these companies out there for decades. Worth, Kimball-Midwest, Fastenal, there's more but the names escape me at the moment.
@@freedomfox8183 The best hardware? A grade 8 bolt from one is a grade 8 bolt from the other. One uses a barcode and the other uses a qr code. Fastenal even has bins that track everything that leaves and orders a replacement for you when stock is low. My original comment was them not being something new. I'm sure they're great people and a great company, but this concept has been around a long time.
The Lord is my shepherd; I shall not want. 2 He maketh me to lie down in green pastures: he leadeth me beside the still waters. 3 He restoreth my soul: he leadeth me in the paths of righteousness for his name's sake. 4 Yea, though I walk through the valley of the shadow of death, I will fear no evil: for thou art with me; thy rod and thy staff they comfort me. 5 Thou preparest a table before me in the presence of mine enemies: thou anointest my head with oil; my cup runneth over. 6 Surely goodness and mercy shall follow me all the days of my life: and I will dwell in the house of the Lord for ever.
Can we just take a minute and appreciate the book Fin had on his center console of his truck? "Dad Joke For Kids" and this thing was hundreds of pages thick! 🤣
It's great seeing wifey's Elco in the garage, it's looking sweet! I haven't seen any content on it lately, which hopefully means it's been reliable. I hope it's getting the use it deserves.
Thank you for saving the caddy from being locked in a building someplace instead of being driven and enjoy . I enjoy all the tools you use on your channel.
It was all original into he ripped everything out that made it a cool old car even was lower mileage and everything worked like new think it doesn't even have the original frame anymore could have used a rougher one. so didn't really save it as much as make it his own car.
And before you say anything I daily drive a all original 92 Buick roadmaster for the last 4 yrs it's at 300k miles almost 100k from me. when it goes then I'll put something else in to keep it going not before .
Mike, one of my favorite things about your videos is that you explain and teach little fab tricks. I like to shut my mouth and open my ears and learn. Thanks for the good videos!
Gotta admit, when you said 2,000hp twin turbo, I couldn't help but think about you calling Steve Morris!!! Any which way you get it going, can't wait to see it run!!
@Chris Wright Agreed. Plus, just like NRE his engines are proven. Quickest street/strip cars out there. Both engine builders serve a purpose and from what i can tell from SM, his customer support is top notch! if that wasnt the case, he wouldnt have customers! Either way, you cant go wrong
It makes me happy to see you enjoy your "hardware store". I used to build custom cnc bandsaws, and not having hardware of all kinds on hand was a massive pain! It made work so much more efficient
Mike, this was one of your best videos because you explained things so well! That’s what I like about watching you build and drive stuff! Best of luck in getting the coolest Cadillac I’ve seen in my life and I’m 71! Merry Christmas to you and your family and above all be safe!! 🙏🙏🙏❤️🇺🇸🇺🇸🇺🇸
My sentiments exactly Alvin. I'm 75 and have been a motorhead since around 1960. Since I started watching Mike's channel a few years back THIS AWESOME Caddy blows my mind and I do appreciate and understand Mike not having patience with those ripp'n on him 'cause he's modified HIS HOTROD to b what HE WANTS. 😀👍👍
One of my favorite videos yet, FRIGGIN LOVE THAT CADDY.... Thank you for sharing and please keep em coming. Everyone keep yourselves and love ones safe and healthy and remember to SMILE
This is THE coolest Cadillac project I have ever seen, and I agree with you Finn. On starting on a nice condition vehicle, saving bunch of time doing rust repairs.
Mike you and I and others have been close mouthed and open eared for almost ever, one thing is I love to learn, see and hear others ideas and then decide for myself what helps me the best, your information is easy to absorb unlike the others who love to boast and brag with certainty to later explain their own screw ups, you're the professor making us A students, the music is awesome too✌
@@mixster56 I'm hoping there is lots of time for this project, I haven't been this stoked in a very long time to see and hear about something so very cool and clean but a pinch out of the norm I'm waiting for that bell on my computer to ring and see more....... let's go!!!!
So happy the Caddy is back! Also, I'm glad you cut it up, because what you're making is way cooler than a over pampered restoration that never sees the light of day!
I learned probably half of everything I know about machining with 2,3,4, & 5 axis CNC mill's by just watching, listening, and studying how someone else does something that's been doing it longer than me. The rest I learned all on my on. Being hands on and just learning the mechanics of the machines on how everything works. I've been machining since 1997 and now I'm the one that's being watched and teaching the younger guy's.
Excited to see the progress on the Caddy!! I love the fact that you're building it how you want and making it a one of a kind Caddy that is way cooler!!
I'm surprised that you down have a Chevy big block mock-up plastic block for this purpose. Love the project and what it's going to be capable of. Great content Finn.
My grandfather taught me early on about several things, but "shut your mouth and open your ears" was one of the first. I'm great full. Plus, any time you think of it is a great time for a beer!! I really love your channel, and I watch Tom Nelson's as well. Keep up the good work , and Happy Holidays!!
One of favorite and most anticipated builds going on right now on YT. I’ve always wanted a a 65-68 coupe, and recently moved it into my 5 year plan😂 I have a couple other builds going on and don’t have room or time to mess with three. Can’t wait to yours ripping and cruising.👍
Obviously it's just opinion, but I feel the jet age produced some of the most beautiful vehicles this world has ever seen. I'm excited about this episode, thank you for taking us on your Journeys
@@ryanlamfers8692 somehow I still have mine from the 80s as well. Hot Wheels and then building models as a kid is what got me into cars once I got older. I don't make a killing, I don't have a mansion yet I love what I do everyday. I feel like I still get to play with toys all day when I go to work LOL
Looks like a fun project. Glad you can get inspiration from some other fun cars nearby and the community you are a part of. Plus, Dad Jokes for kids! Helping the kids have a sense of humor! Nice!
Very cool car. Your suggested changes to the cage seem like a major mistake to me. As for an engine: seems like the obvious solution is a Steve Morris SML, but a BBC works- gonna give you hell of time fitting it though For mock up, have you considered one of those plastic blocks?
Same here, l almost got lost in the cr'pto world until my colleague lntroduced me to Sam.Altman and he helped me, now my portfolio is worth $ 29,700 and l'm happy. I just like the way he transparently analyzed my trad e ®.
Hey Fin, thanks for doing these videos. You are a natural talent behind,and in front of the camera. I don’t think I have ever seen you upset with anything either. Fantastic channel.
Your logic with the car is spot on. Although these cars are getting rare there are ultra clean low mileage museum quality cars of nearly all makes and models out there. Go for it! Loving the channel.
Im absolutely bewildered how laid back you are Mike.....your so relaxing to listen to, i may have to take a nap here soon. Will you read me a bedtime story.......please Mike lol
Anybody that's ever built a custom hotrod knows nothing can happen without fasteners. Being able to grab whatever you need quickly is invaluable. Very cool.
Mr. B here ! Mr. Finnegan I think my 70 year brain can understand the Cadillac build have not see the car since Roadkill , most people would think building the car that is in your head is nuts ! I do not , how far you take it will blow everyone’s mind ! Age has taken my body now and am lucky keep what I have running . You build that Caddy make your vision come to life . Good luck & Merry Christmas to you and yours !
Wow, that wall of Bolts and nuts is just a dream to have in the garage. Why haven’t this been a thing before? For big fab shops and fast working hobby garage this is just magic and a must have. Awesome idea and great for you to have it at home now! 🎉
Love the disassembling of Game Overs old engine. You can tell, as soon as something is "marine" - there's a giant spanner involved. Even on fancy race boats engines. Love it.
I have enjoyed all of the episodes over the past year but have been quietly anticipating the Cadillac build. So happy to see it in the business side of the shop.
That Cadillac is such a beautiful car. I don’t quite understand putting that much horsepower in that car, but I like what you are doing. There is nothing else like it.
That shop is better stocked than any hardware store I've ever seen. The bolts are even in the right places. Of all the toys that have been through there, that might be the thing I'm most jealous of.
People who have only seen you over on motor trend might not fully appreciate your attention to detail. If someone was going to cut up a super clean caddy like this I want it to be you, because when you're working on your own projects and your own time, you really put the time in and give appropriate attention to every detail. Keep doing what you're doing Mike!
You gotta love Mike. First of all he's funny as hell, he's a good host, he isn't afraid to say what's on his mind, and he also isn't afraid to tell people where to go if they don't agree with HIS DECISIONS on what to do with his own vehicles. That's exactly how I am. You don't like what I'm doing with my own cars? Wait, exactly which of my bills are you planning on paying this month? Yeah, pound salt. Keep up the awesome work Mike!
The "Wall O' Hardware" is absolutely amazing. Every garage lover's dream! Thanks for the update, Finn! Still find it sad that you had to chop out that tubing for the front seats, but, progress, baby! Looking sooo forward to this build!
Great vid. Dad joke book, angry wife having to help in garage, redoing really nice work, sellers remorse, never thought about protecting glass during fab, not having correct parts for mock up, 61 is the best caddy year..... good episode
Just started watching and I he first words about falling in love with the car again. That is soooo true. Had a 62 ss impala sitting in the corner for years and pulled it out the other day and I’m in love with it. Only car I can think about right now. I’ve got others and better cars but this one has my hart as of now
@TRT 23:52 BEST advice ever. Always remain teachable. My older brother instilled that in me years ago as a pup, if someone who knows more than you, and is maybe even able/willing to show you or let you watch another method, take the time to absorb.
The guy in the narraive says only year Cadillac had the 'rocket tail lights" He should take a look at the "60" as it was the 1ts Cad with virtually the same tail light only not laid on its side. Kudos for the Nuts & Bolts guys make hings so much easier as organization usually does.
That year Cadillac is smooth as hell. The lines. And the way you got it set up and riding. Looks really good. I even like the color. And the skinny front tires and fats in the back. Love it. Can't say I fully agree with the hemi, but do what you do. Still great.
My favorite part of your Caddy are the lower fins. When you look at the car from the side you don't notice them as much but when you look from the back you can see that they are truly a complete fin on each side. I love 'em. The old cars had so much class.
Hey, mike! Love your TH-cam Chanel! I was driving the other day and saw the exact same caddy in Australia (minus the tubs and cage etc) the reason I know this was from your description of the tail lights! Can’t wait to see the finished product!
Sorry I have missed a bunch of episodes 😢 my life is a nightmare and my wheelchair sucks I need a welder machinist roadkill mechanic lol can’t wait till the caddy’s running 8’s with the whole crew in the back seat ✌️🙏🍀💰🤗👍🥰🔥
And finnegans wife saw the video before editing, and commented, you made yourself a Fort in your caddy, how cute' . Merry Christmas to you and your family buddy. Good fortune for 2022 to you all.
People need to stop being so negative it's his car who cares what he does to his own car. It's his car! Atleast it's not rotting away it will be pounding pavement for many years to come and can be enjoyed for a long time. Stop hating start relating and enjoy this beautiful caddys new shot at life plz.
The Hemi Heads look almost as Big as big as the Big block Chevy block . What a ' MONSTER . Love the Big Cadillacs , finding low mileage , straight , rust free models take some hunting but are worth the effort . Your 61 Coupe De Ville is really going to be a Very nice car . Keep building and posting the build . Sure wish you would ALLOW my 73 year old self to visit and learn as many skills as possible for about two weeks ( give or take until my welcome runs out ) to get as many good ideas to begin my build my 1961 455 Pontiac 2-door post .Great Post Mike . One note Mike . I went just south of Muskigee , Oklahoma and transported a 1960 Coupe De Ville back to Little Rock , Arkansas for a friend . Really nice Cadillac but it was hanging over the rear of my 18 foot trailer by two feet . It rode like a butterfly and floated like a ' bee . Thanks for reading .
glad to see the car getting the love..... looking forward to seeing it on the drag and drive events in 2023/4. I personally would be OK with a roots blower sticking out of the hood :-)
![[Part 1] รักมาไม่ทันตั้งตัว❤ หนุ่มสาวโสดถูกจับมาแต่งงานกันกะทันหัน แถมเธอยังเป็นหัวหน้าของเขา?!](http://i.ytimg.com/vi/y2pOOMkuFI0/mqdefault.jpg)
This has got to be the coolest Cadillac on the planet
Me and the wife are planning on 427 chevy swapping a '64 sedan Deville were planning to save ! But still not as cool as a race boat engine in the cruella Deville! ( aka fins caddy ) lol
Actually farm truck and Asians got the coolest Cadillac burnout car with a blower
yep. but with all that weight on these pizza cutters in the front i don t know
That's what I was just saying. Atleast the coolest and best looking old caddy on the planet.
Is
Those bolts and nuts guys are killing it. One of those things that once you see it you wonder why it didn’t exist already and they’re hooking up with all the right TH-camrs.
Its existed for years. We've used Fastenal and Lawson. They literally do the same thing. Heck the rep will stop by once a week and refill them for you if you choose. You too can get the nut and bolt setup shown here for $12,223.91 plus shipping.
@@TravelingStacker still better deal than both companies you listed I used all 3 regularly for awhile at work and the nuts and bolts are the people to go with if you want the best hardware for your money and by far the easiest to use
The king of speed tv in my eyes Stacy Davis advertised this type of set up a few times.
There's been like a half a dozen of these companies out there for decades. Worth, Kimball-Midwest, Fastenal, there's more but the names escape me at the moment.
@@freedomfox8183 The best hardware? A grade 8 bolt from one is a grade 8 bolt from the other. One uses a barcode and the other uses a qr code. Fastenal even has bins that track everything that leaves and orders a replacement for you when stock is low. My original comment was them not being something new. I'm sure they're great people and a great company, but this concept has been around a long time.
"I've made it the car I wanted" is something that everyone who has put blood/sweat/tears into a build already understood.
The Lord is my shepherd; I shall not want.
2 He maketh me to lie down in green pastures: he leadeth me beside the still waters.
3 He restoreth my soul: he leadeth me in the paths of righteousness for his name's sake.
4 Yea, though I walk through the valley of the shadow of death, I will fear no evil: for thou art with me; thy rod and thy staff they comfort me.
5 Thou preparest a table before me in the presence of mine enemies: thou anointest my head with oil; my cup runneth over.
6 Surely goodness and mercy shall follow me all the days of my life: and I will dwell in the house of the Lord for ever.
@@adamjohns350 Take your fairy tales elsewhere
Compare those two cars from your 20's to your 50's.
@@krusher74 Look to Fins long time partner, Frieburger. He's owned the Super Bee since his twenties, the car just changes over time as you own it.
Can we just take a minute and appreciate the book Fin had on his center console of his truck? "Dad Joke For Kids" and this thing was hundreds of pages thick! 🤣
One of my favorite builds! Beats the hell out of building another damn '69 Camaro!!!
THE BULLETPROFF GARAGE!!! That would most likely be painted Red and running some sort of ls. BORING.!!!
Dude ...!...ya can't have enuff Camaro builds.....fukn fox body's on the other hand....sheeeeeesh! 🍺🤣👌🇳🇿
Or a Fox body mustang 🤢
Yea, I prefer the 68 over the 69.
@@62cripple potato pototo. Same boring builds
I'm so happy to see this project back on the front burner. Also, I wish Newbern was still on the channel to add his humor.
What happened to Newbern? It's been a while since I've watched this channel. The 45min+ videos are too long for me most the time.
I'm glad the Caddy is making progress, its one of my all-time favorite projects on this channel!
It's great seeing wifey's Elco in the garage, it's looking sweet! I haven't seen any content on it lately, which hopefully means it's been reliable. I hope it's getting the use it deserves.
You could say the main hoop is where the B pillar isn't.
Also, baller move using a 711" Sonny Leonard as a "mock up" engine 😉
Thank you for saving the caddy from being locked in a building someplace instead of being driven and enjoy . I enjoy all the tools you use on your channel.
It was all original into he ripped everything out that made it a cool old car even was lower mileage and everything worked like new think it doesn't even have the original frame anymore could have used a rougher one. so didn't really save it as much as make it his own car.
And before you say anything I daily drive a all original 92 Buick roadmaster for the last 4 yrs it's at 300k miles almost 100k from me. when it goes then I'll put something else in to keep it going not before .
Mike, one of my favorite things about your videos is that you explain and teach little fab tricks.
I like to shut my mouth and open my ears and learn. Thanks for the good videos!
Gotta admit, when you said 2,000hp twin turbo, I couldn't help but think about you calling Steve Morris!!! Any which way you get it going, can't wait to see it run!!
NRE makes the same HP as SM but without the arrogance.
i don't see many often nre motor being beat up in racecar. nre engine is a show car engine just to show up the beauty
@Chris Wright Agreed. Plus, just like NRE his engines are proven. Quickest street/strip cars out there. Both engine builders serve a purpose and from what i can tell from SM, his customer support is top notch! if that wasnt the case, he wouldnt have customers! Either way, you cant go wrong
With Steve Morris you don’t have to worry about getting your motor but with NRE you will be lucky to even see your motor get done.
@@numlockkilla Takes arrogance to make comments with ignorance.
Really excited to see the Caddy back. This is hands down my favorite project on this channel.
So glad to see the Caddy back on the channel!😎
Oh boy, I was watching the video and oh well just a Cadillac...then I saw the chute and cage. Dam! Gonna be drag car!! Can't wait to see this run!
Cold georgia day , brown grass outside and trees with no leaves and in the basement working on cars . Brings back memories.
It makes me happy to see you enjoy your "hardware store". I used to build custom cnc bandsaws, and not having hardware of all kinds on hand was a massive pain! It made work so much more efficient
Mike, this was one of your best videos because you explained things so well! That’s what I like about watching you build and drive stuff! Best of luck in getting the coolest Cadillac I’ve seen in my life and I’m 71!
Merry Christmas to you and your family and above all be safe!! 🙏🙏🙏❤️🇺🇸🇺🇸🇺🇸
My sentiments exactly Alvin. I'm 75 and have been a motorhead since around 1960. Since I started watching Mike's channel a few years back THIS AWESOME Caddy blows my mind and I do appreciate and understand Mike not having patience with those ripp'n on him 'cause he's modified HIS HOTROD to b what HE WANTS. 😀👍👍
One of my favorite videos yet, FRIGGIN LOVE THAT CADDY.... Thank you for sharing and please keep em coming. Everyone keep yourselves and love ones safe and healthy and remember to SMILE
This is THE coolest Cadillac project I have ever seen, and I agree with you Finn. On starting on a nice condition vehicle, saving bunch of time doing rust repairs.
Mike you and I and others have been close mouthed and open eared for almost ever, one thing is I love to learn, see and hear others ideas and then decide for myself what helps me the best, your information is easy to absorb unlike the others who love to boast and brag with certainty to later explain their own screw ups, you're the professor making us A students, the music is awesome too✌
amen sir
@@mixster56 I'm hoping there is lots of time for this project, I haven't been this stoked in a very long time to see and hear about something so very cool and clean but a pinch out of the norm I'm waiting for that bell on my computer to ring and see more....... let's go!!!!
So happy the Caddy is back! Also, I'm glad you cut it up, because what you're making is way cooler than a over pampered restoration that never sees the light of day!
I learned probably half of everything I know about machining with 2,3,4, & 5 axis CNC mill's by just watching, listening, and studying how someone else does something that's been doing it longer than me. The rest I learned all on my on. Being hands on and just learning the mechanics of the machines on how everything works. I've been machining since 1997 and now I'm the one that's being watched and teaching the younger guy's.
Excited to see the progress on the Caddy!! I love the fact that you're building it how you want and making it a one of a kind Caddy that is way cooler!!
My God is that car is clean!!!! great to concentrate on the performance mods versus sticking bank into the body!
I'm surprised that you down have a Chevy big block mock-up plastic block for this purpose. Love the project and what it's going to be capable of. Great content Finn.
I came here to say that and also an empty trans case
My grandfather taught me early on about several things, but "shut your mouth and open your ears" was one of the first. I'm great full. Plus, any time you think of it is a great time for a beer!! I really love your channel, and I watch Tom Nelson's as well. Keep up the good work , and Happy Holidays!!
One of favorite and most anticipated builds going on right now on YT. I’ve always wanted a a 65-68 coupe, and recently moved it into my 5 year plan😂 I have a couple other builds going on and don’t have room or time to mess with three. Can’t wait to yours ripping and cruising.👍
OMG thank you, we've we have been waiting impatiently for you to deliver the goods on this dream yact! More, m0re MOre MORE ! ! ! !
Obviously it's just opinion, but I feel the jet age produced some of the most beautiful vehicles this world has ever seen.
I'm excited about this episode, thank you for taking us on your Journeys
I agree. The late 50's to early/mid 60's are beautiful designs.
I've been dreaming about a 59 Caddy since I was playing with Hotwheels, still have a couple of those around.
They’re not cars. They’re starships that just happen to be on wheels.
@@RomVlad they had Chrome Jets on the hoods and molded to the sides, contrails streaming from the doors to the fenders, absolutely beautiful
@@ryanlamfers8692 somehow I still have mine from the 80s as well. Hot Wheels and then building models as a kid is what got me into cars once I got older.
I don't make a killing, I don't have a mansion yet I love what I do everyday. I feel like I still get to play with toys all day when I go to work LOL
Seeing the Roadkill metal art donkey on the wall gave me all the nostalgia feels. Thanks for everything, Finn.
When will we see the Daytona clone again. Been waiting and hoping to see that build start??
Looks like a fun project. Glad you can get inspiration from some other fun cars nearby and the community you are a part of. Plus, Dad Jokes for kids! Helping the kids have a sense of humor! Nice!
Very cool car.
Your suggested changes to the cage seem like a major mistake to me.
As for an engine: seems like the obvious solution is a Steve Morris SML, but a BBC works- gonna give you hell of time fitting it though
For mock up, have you considered one of those plastic blocks?
Great to see YOU & the Caddy back in the build vids !!!
*Making money is an action. Keeping money is behavioral discipline , but “Growing money is intelligence” I heard this from someone 🌟*💫
Same here, l almost got lost in the cr'pto world until my colleague lntroduced me to Sam.Altman and he helped me, now my portfolio is worth $ 29,700 and l'm happy. I just like the way he transparently analyzed my trad e ®.
@nickilsner251 please how can l contact Mr Sam Altman? I want to lnvst with him also...
@nickilsner251 Thanks for the recommendation, I just contacted him and he attends to me nicely.
I'm not much of a Caddy guy, but this one looks and sits PERFECT!!!!
I think I NEED one of those belt sanders.
Hey Fin, thanks for doing these videos. You are a natural talent behind,and in front of the camera. I don’t think I have ever seen you upset with anything either. Fantastic channel.
Big cars going down the track quickly is fun to watch. Your eyes have your brain shaking your head.
Thank you for the video! I agree that people who knows the most do not speak that much and spend most of their time to listen.
Your absolutely right Mike! Being a big car lover myself, it's all about having fun bringing a car to your own personal modifications
I saw a 59 Caddy Top Alcohol one time at Atlanta Dragway. This takes me back. Thanks Mike!
Your logic with the car is spot on. Although these cars are getting rare there are ultra clean low mileage museum quality cars of nearly all makes and models out there. Go for it! Loving the channel.
Im absolutely bewildered how laid back you are Mike.....your so relaxing to listen to, i may have to take a nap here soon. Will you read me a bedtime story.......please Mike lol
Anybody that's ever built a custom hotrod knows nothing can happen without fasteners. Being able to grab whatever you need quickly is invaluable. Very cool.
I am really enjoying this format showing you working in the home garage shop. It is really relatable, even though you're building this amazing car.
Mr. B here ! Mr. Finnegan I think my 70 year brain can understand the Cadillac build have not see the car since Roadkill , most people would think building the car that is in your head is nuts ! I do not , how far you take it will blow everyone’s mind ! Age has taken my body now and am lucky keep what I have running . You build that Caddy make your vision come to life . Good luck & Merry Christmas to you and yours !
I think this is one of the best hands on videos yet! Like you say, mouth shut, watch and learn!
So glad this this is our videos here I've been waiting for the Cadillac switch out.
This is the only build on any TH-cam channel that I can’t wait to be completed. This is the coolest Cadillac build in existence.
Wow, that wall of Bolts and nuts is just a dream to have in the garage. Why haven’t this been a thing before? For big fab shops and fast working hobby garage this is just magic and a must have. Awesome idea and great for you to have it at home now! 🎉
Love the disassembling of Game Overs old engine.
You can tell, as soon as something is "marine" - there's a giant spanner involved. Even on fancy race boats engines.
Love it.
I have enjoyed all of the episodes over the past year but have been quietly anticipating the Cadillac build. So happy to see it in the business side of the shop.
I've got a 4 door just like yours. I love the car it's going to be a tribute to my dad and grandpa. I have the same interior
I really like your channel. I see upper level craftmanship that is presented without a frenetic visual mindwash.
"Triagional." It's now a word and I love it. I'm going to use it whenever possible.
I hope I can see this car in person this year it's so beautiful
Don't know why but this video with just you in it was much more interesting. Thanks
That Cadillac is such a beautiful car. I don’t quite understand putting that much horsepower in that car, but I like what you are doing.
There is nothing else like it.
That shop is better stocked than any hardware store I've ever seen. The bolts are even in the right places. Of all the toys that have been through there, that might be the thing I'm most jealous of.
People who have only seen you over on motor trend might not fully appreciate your attention to detail. If someone was going to cut up a super clean caddy like this I want it to be you, because when you're working on your own projects and your own time, you really put the time in and give appropriate attention to every detail. Keep doing what you're doing Mike!
I had no clue he was on motor trend
Love the new, old format Mr. Finnegan. Thanks!
You gotta love Mike. First of all he's funny as hell, he's a good host, he isn't afraid to say what's on his mind, and he also isn't afraid to tell people where to go if they don't agree with HIS DECISIONS on what to do with his own vehicles. That's exactly how I am. You don't like what I'm doing with my own cars? Wait, exactly which of my bills are you planning on paying this month? Yeah, pound salt. Keep up the awesome work Mike!
The "Wall O' Hardware" is absolutely amazing. Every garage lover's dream! Thanks for the update, Finn! Still find it sad that you had to chop out that tubing for the front seats, but, progress, baby! Looking sooo forward to this build!
Great vid. Dad joke book, angry wife having to help in garage, redoing really nice work, sellers remorse, never thought about protecting glass during fab, not having correct parts for mock up, 61 is the best caddy year..... good episode
Keep up the good work.. getting me motivated to get my 60 Ford Fairlane with 460/C6 running thanks again
Just started watching and I he first words about falling in love with the car again. That is soooo true. Had a 62 ss impala sitting in the corner for years and pulled it out the other day and I’m in love with it. Only car I can think about right now. I’ve got others and better cars but this one has my hart as of now
11:00 -11:18. This is what I like about your show Mike, Building this caddy your way. Can't wait to see it when it's finished.
Hella cool build, she is your car and you didn't chop and shave her looks away which is awesome, I like my vehicles stock looking
@TRT 23:52 BEST advice ever. Always remain teachable. My older brother instilled that in me years ago as a pup, if someone who knows more than you, and is maybe even able/willing to show you or let you watch another method, take the time to absorb.
Nice edit in the Trans unbox segment! Dig it.
The Sonny Leonard Big Block from Game Over in your '61 Cadillac!! YES YES ALL THE YES!!!
i love the look of the "jet age" inspired cars..so cool looking!
Nice that you have an Ace Hardware in the basement now. Handy Dandy!
More Cadillac! Can't wait tot see this project on the track! Much love!
Happy to see the Caddy back in work, Your hardware setup is fantastic and should save you hour of time but mostly save on frustration. Good Stuff!
Very true!
The guy in the narraive says only year Cadillac had the 'rocket tail lights" He should take a look at the "60" as it was the 1ts Cad with virtually the same tail light only not laid on its side. Kudos for the Nuts & Bolts guys make hings so much easier as organization usually does.
That year Cadillac is smooth as hell. The lines. And the way you got it set up and riding. Looks really good. I even like the color. And the skinny front tires and fats in the back. Love it. Can't say I fully agree with the hemi, but do what you do. Still great.
Good for you! It's your car, build it the way you want it. Can't wait to see how it runs and drives.
My favorite part of your Caddy are the lower fins.
When you look at the car from the side you don't notice them as much but when you look from the back you can see that they are truly a complete fin on each side.
I love 'em.
The old cars had so much class.
Hey, mike! Love your TH-cam Chanel! I was driving the other day and saw the exact same caddy in Australia (minus the tubs and cage etc) the reason I know this was from your description of the tail lights! Can’t wait to see the finished product!
Sorry I have missed a bunch of episodes 😢 my life is a nightmare and my wheelchair sucks I need a welder machinist roadkill mechanic lol can’t wait till the caddy’s running 8’s with the whole crew in the back seat ✌️🙏🍀💰🤗👍🥰🔥
This is my favorite build on TH-cam. Can’t wait to see it run some drag and drives 🤘
Good to see the El Camino, still an awesome looking ride Mike.....👍🙂
Man....the rear finning on this 61 is just phenomenal !
Dude that’s a sweet hardware set up . The fact that you can scan and re Oder is an awesome touch. Love the Caddy and can’t wait to see it progress.
So glad to see the caddy back. It’s my second favorite project only to the c10 cause …well…. C10!!!! Enough said!
i do not mind hanging around and watch for 2 hours. the build is going to be rad
That is gonna be one bad ass racecar. It's beautiful and gonna be fast. Killer job, guys.
And finnegans wife saw the video before editing, and commented, you made yourself a Fort in your caddy, how cute' . Merry Christmas to you and your family buddy. Good fortune for 2022 to you all.
24:05.
This is a quote to live by.
I've been told once that if you're the best kid in the class, you're in the wrong class.
Loving the attention to detail and the early prep for a smoooooth end result. Mint. All power to ya, brother 😎🤟🏼
People need to stop being so negative it's his car who cares what he does to his own car. It's his car! Atleast it's not rotting away it will be pounding pavement for many years to come and can be enjoyed for a long time. Stop hating start relating and enjoy this beautiful caddys new shot at life plz.
Holy s*** I can't believe the actual Mr Finnegan actually replied to me holy s*** life is complete now I can die happy now
The good pros are easy to spot! Good to see real pros good job man
The Hemi Heads look almost as Big as big as the Big block Chevy block . What a ' MONSTER . Love the Big Cadillacs , finding low mileage , straight , rust free models take some hunting but are worth the effort . Your 61 Coupe De Ville is really going to be a Very nice car . Keep building and posting the build . Sure wish you would ALLOW my 73 year old self to visit and learn as many skills as possible for about two weeks ( give or take until my welcome runs out ) to get as many good ideas to begin my build my 1961 455 Pontiac 2-door post .Great Post Mike . One note Mike . I went just south of Muskigee , Oklahoma and transported a 1960 Coupe De Ville back to Little Rock , Arkansas for a friend . Really nice Cadillac but it was hanging over the rear of my 18 foot trailer by two feet . It rode like a butterfly and floated like a ' bee . Thanks for reading .
I have been looking around for updates on the caddy so this was perfectly timed!
The thing that the Caddy is going to have A/c puts a Smile on my face
Nice to know I'm not the only person dealing with the issues of old Cadillac power windows.
Love the dads jokes for kids book. That too funny😂😂. Keep up the great videos Mike. 🇺🇸✌️
glad to see the car getting the love..... looking forward to seeing it on the drag and drive events in 2023/4. I personally would be OK with a roots blower sticking out of the hood :-)
8.4K+👍's up FG thank you for sharing this video with us all