Great video! My son is needing his rear wheel bearings replaced on his 2005 YZF450! After your video I’m more confident that we can get the materials and do the job. Thanks for the content and excellent explanation for the process!!!! 👍🏻😁
Got it all, i'm changing rear bearings already but both wouldn't hurt. So I'd need some front bearings for my 2014 ktm sx 125. Great Videos keep them up!
Hey man love the videos. Cool to have someone who does solo work like me. I did all four things you asked. I ride a 2001 rm 125 and I need a rear wheel bearing
I did all the instructions to get into the draw to win. The bike I have is a 2007 Suzuki Rmz250 I want and need rear wheel bearing, I would love to win!! Your channel is awesome and love learning about dirt bikes from your Vids👍👍
Hello, dear friend. I put one bearing completely inside the seat, but the original spacer is about 0.5 mm bigger and the second bearing does not fit completely inside the seat. Does this not cause a problem? If I hit the second bearing more, they become completely stiff and it is no longer possible to rotate the bearings with a finger. Thanks.
i did subcribe to your IG but i dont need one....coz i jz sold my bike....but still loving to watch your vid..as u said wadever we do...stay motovated ....looking forward for new ride.
Previous owner of my bike has pressed the bearing in a bit too far and they're against the spacer stopping it from moving out the way meaning I can't get any sort of edge to pushed or pull the bearing out, any tips??
I have done all you asked! I know am a littele late but if you can i will like to have one front set for my Yamaha YZ450f 16! Many thanks and kee up the good work! Regards from Macedonia- Europe 🙂
Hi, I hope you can help. I have a 2013 TE300 and want to get rid of the current fender with the brace. What year and model front plate and fender did you fit to the bike behind you? Thank you.
What’s up rado. Great video as always. Im in need of some front wheel bearings for my 2008 yz250f. I followed factory links on IG. I have Been subscribed to your channel and following u on IG for a long time...
Dirt N Iron , I traded it for 2 other bikes and some cash. The guy wanted it more than I did. Now I’m rocking the yz. It’s trail ready tho. It’s got a rekluse auto clutch ,flywheel weight, 18” rear wheel, racetech suspension,steering dampener, skid plate, ect.ect....
Dirt N Iron I have finally found/built a bike that is exactly what I expect 100% of the time. It’s a bike that when this one wears out I’ll replace it with the same bike. The beta was amazing but it was to pretty to ride like I want to ride because I didn’t want to mess it up. It is a bike I would recommend for anybody who wants an amazing bike and has the money to repair it. They are expensive bikes to work on and modify. The yz is also an awesome bike with awesome power and the rekluse/flywheel weight really makes the bike the perfect bike for an older trail rider.
Hey, nice Video! Can you please do also a Video on how to properly install the tyre? I want to change the rear bearings on the 2011 ktm exc 250! I hope i win! :) I did all what you said to enter the giveaway :)
just got it done would like rear bearings for my 99 kx250 would be awesome to try a new company without really any risk. i also do builds give me a follow @cannon.arett
Great video! My son is needing his rear wheel bearings replaced on his 2005 YZF450! After your video I’m more confident that we can get the materials and do the job. Thanks for the content and excellent explanation for the process!!!! 👍🏻😁
Glad I could help! good luck guys!
Got it all, i'm changing rear bearings already but both wouldn't hurt.
So I'd need some front bearings for my 2014 ktm sx 125.
Great Videos keep them up!
Hey man love the videos. Cool to have someone who does solo work like me. I did all four things you asked. I ride a 2001 rm 125 and I need a rear wheel bearing
Thanks Ben!
That is an awesome work space! Thanks for sharing your methods with us!
Glad you like it!
All requirements met. 2017 KTM 300XC Front wheel. Thank you for the opportunity!!!
cool Mike! you got great bike!
Done! Love your vids, Rado. Doing a complete overhaul on a 94 KX250 this winter and bearings would be a huge help!
thanks Sean!
Thank You Rado ! I appreciate you . Your channel inspires and motivates. All steps done. 1998 Yamaha YZ 400 F. Front Bearings. Gracias mi Amigo
thanks Carlo :)
I did all the instructions to get into the draw to win.
The bike I have is a 2007 Suzuki Rmz250 I want and need rear wheel bearing, I would love to win!!
Your channel is awesome and love learning about dirt bikes from your Vids👍👍
thanks Joshua, I am glad it helps!
Nice video man, simple explanation. All done man. I need front bearings for my 2008 WR450
Awsome wheels Rado!Finished. 2002 cr125I actually need the linkage bearings but if not RearWheel should work .Thanx Rado!
Hey John, thanks for the comment. The drawing was couple months ago though ;)
Giving the Husaberg some love. Nice👍.
Did it all! 2012 KTM 450 XC-W Front wheel bearings
Thanks for sharing the video. Very clear and professional caliber. RMX 250 1998 front
did it all. I ride a 2011 KTM sxf250. front wheel bearings would be nice! been watching your vids for awhile keep it up! :)
thanks a lot Henrik!
About to do this on my f800gs. You made it look easy.
its really quite simple ;)
Hello, dear friend. I put one bearing completely inside the seat, but the original spacer is about 0.5 mm bigger and the second bearing does not fit completely inside the seat. Does this not cause a problem? If I hit the second bearing more, they become completely stiff and it is no longer possible to rotate the bearings with a finger. Thanks.
I'm doing my ktm's bearings at the moment! Thanks for reminding me about the grease. I guess the PDS bearing seals are coming off again...
glad I could help ;)
Are there any other methods to eliminate the need for a blow torch? My hubs are painted and I don't want to ruin them. Thanks!
yes, freeze the bearings and use the heat gun for the hubs
i did subcribe to your IG but i dont need one....coz i jz sold my bike....but still loving to watch your vid..as u said wadever we do...stay motovated ....looking forward for new ride.
Thanks Nicholas and welcome on board!
Last time I forget to put my spacer inside )
;)
Previous owner of my bike has pressed the bearing in a bit too far and they're against the spacer stopping it from moving out the way meaning I can't get any sort of edge to pushed or pull the bearing out, any tips??
Liked subscribed.... Wheel bearings for a YZ 80 I think I messed up the hub the locking is kinda worn down :( I'm broke as hell
Done. Done. And done. 2010 KTM 250sx rear. But I also need a front as well 😬😬
Very helpful. Thanks for keeping it concise!
thanks Jamie, glad it helps!
Excellent work
I have done all you asked! I know am a littele late but if you can i will like to have one front set for my Yamaha YZ450f 16! Many thanks and kee up the good work! Regards from Macedonia- Europe 🙂
sorry Ivan, next time ;)
@@dirtniron NP Dirt Iron! Thanks 🙂
Did all 4... rear for a 2019 ktm xcf. Thanks
Hi, I hope you can help. I have a 2013 TE300 and want to get rid of the current fender with the brace.
What year and model front plate and fender did you fit to the bike behind you?
Thank you.
thats the stock fender and number plate that was on husaberg and its the same for ktm 2004 thru 2008 I believe
@@dirtniron awesome, thanks. Have a great Christmas.
Merry Christmas
done. my Yamaha yz 250 f 2005 is dreaming about the front wheel bearings
All done.
TM EN 144 2017
Front wheel bearings.
Done!!
Husqvarna TE310 2011
Front wheel bearings.
Done! Yamaha Yz 125 1999. Front !
done! 2014 yz250f (front wheel )
Love the content! Always helpful and interesting. 1997 KX250 rear wheel
I did it all plus I was the 100th thumbs up 2009 yz450f location San Diego
So easy :D btw i have a KTM exc 300 07 and I need front wheel bearings.
Done can I please have wheel bearings for a ktm 85 2008 and I need rear bearings thank you
nice work mate !
Thanks mate ;)
Nice video! I can use some bearings for my kdx200 :)
If I dont have a torch could I use a sheet gun?
not quite sure, you need high temp to expand that metal
So, I tried it with the heat gun, and it works. I had to hold it there for about 1 to 2 minutes, but it was also 22°F outside as well
Done! 2013 CRF250X
Done 2013 KTM 250xc front wheel bearing.
Done✅ Front Set for 2004 Yz250f
I did it all. Ktm sx 125 2004 front wheel bearings
Did it all I ride an 04 Yamaha yz250f and I would like rear wheel bearings
I love your videos!!!!
thanks Marley
Done. Ktm 2017 front wheel. Thanks
Done.
2006 Honda CR250
Rear wheel bearings
What’s up rado. Great video as always. Im in need of some front wheel bearings for my 2008 yz250f. I followed factory links on IG. I have Been subscribed to your channel and following u on IG for a long time...
sounds good Shaun! what happened to your Beta?
Dirt N Iron , I traded it for 2 other bikes and some cash. The guy wanted it more than I did. Now I’m rocking the yz. It’s trail ready tho. It’s got a rekluse auto clutch ,flywheel weight, 18” rear wheel, racetech suspension,steering dampener, skid plate, ect.ect....
sounds interesting, how do you like it? how does it compare to Beta?
Dirt N Iron I have finally found/built a bike that is exactly what I expect 100% of the time. It’s a bike that when this one wears out I’ll replace it with the same bike. The beta was amazing but it was to pretty to ride like I want to ride because I didn’t want to mess it up. It is a bike I would recommend for anybody who wants an amazing bike and has the money to repair it. They are expensive bikes to work on and modify. The yz is also an awesome bike with awesome power and the rekluse/flywheel weight really makes the bike the perfect bike for an older trail rider.
Sounds good Shaun 👍
Done.
'07 Honda CR250
Rear bearings
Done 2018 300 xcw six days
Done
2002 KTM 520 EXC
Front wheel bearings
I’m done and I ride a 1989 CR125R,front
Done . 2015 beta 250rr. Rear
Great!!!! Thank you
My spacer doesnt move that much..91 xr600r front wheel
Done. 03 klx400 rear
done! 2006 KTM 300 XC-W Thanks for the giveaways!!!
All done. 2015 ktm450 xcw rear wheel please :)
;)
Is that a dirt and iron polo? Aaaa I want one lol!!!! Ok never mind I see that it a factory links polo and gloves.
Good how to Rado 👍🏻
Thanks Hayden!
Thanks for the free bearings! Hahaha
Done ✔
2013 KX250F
Rear wheel bearing 😄
thanks
KTM 2007 85sx big wheel
Done 2016 ktm 250 xc
I did it all ktm 2008 125 sx
cool man!
Algum BR assistindo ?também
this guy seems to have the same organizational and random tool choice as me
right on brother
@@dirtniron ok sister
Hey, nice Video! Can you please do also a Video on how to properly install the tyre? I want to change the rear bearings on the 2011 ktm exc 250!
I hope i win! :) I did all what you said to enter the giveaway :)
here you go, tire video: th-cam.com/video/vtFI8WwLGPM/w-d-xo.html
Thank You!! :)@@dirtniron
Who won ?
1997 kx125
just got it done would like rear bearings for my 99 kx250 would be awesome to try a new company without really any risk. i also do builds give me a follow @cannon.arett