I can't thank you enough for showing all your vids. I was a Nurse aide for 25 years and 3 years ago I broke my leg and had 3 operations on it. Because of that I can no longer be an Aide because of the lifting that's involved. So I had no other job skills but watch restoration was my hobby, but now I am stepping up my game and plan to sell some good quality vintage watches on ebay and some other places. Whenever I have a question about anything I know I can come here and learn what I need to know. Everything I have learned about this has been self taught from books and cd's. My father owns an office building and is giving me an office to set up a shop and leave the limited space of my man cave. But if I was asked who my mentor was I would have to say you. You have helped me a great deal, it has quite literally been a life changer. Thanks again! Link..... And yes that is my real name lol.....
There's something enormously appealing about the "old" watch & clock maker/repairer. It fascinates me over again to return to this which was one of my very first engineering interests. The snag back then was that you can't let a kid loose amongst expensive movements. The necessary tools cost "loadsa money" - UNLESS you are going to use them to make some money and pay for themselves. Thanks for the superb videos and the honest comentary. You're Mark - right? Lovely job Mark!
You truly are a MASTER at what you do. I'm amazed at the amount of precision components and work necessary to service them. It is an art. Thanks Again.
I been repairing watches since I was 14 I now I am into my mid 70s first time I've watched a video on watch repairing thank you done a marvellous job showing people how it's done in my day the only way to learn was to be taught by other watch makers well done
When I see how well crafted these videos are, along side of your extensive knowledge, I realize how lucky we are to share in your knowledge. Thank you so much for not only your fine skill in horology but the file portrayal of your skills imparted upon us. Thanks many times over!!
I don't know a single thing about watches but these videos are fantastic. Very relaxing, well made, and educational. It's a great way to learn about such a fascinating world of such precise engineering.
I have been putting it off for far to long to try and learn the PROPER WAY to perform a lot of repair techniques that I really needed to learn how to do. Now that I have seen this Gentleman's videos, I am ashamed that I put this off so long. He makes everything so crystal clear that I am finding it to not be as difficult to do these more difficult repairs as I once thought. A BIG thumbs up for ALL of this Gentleman's watch repair video's. Thanks a lot, Mike
It is fascinating seeing all being prepared and the new parts sequentially being put back, making sure that the tools are well lined up for such accuracy. Congratulations for your skills .
Many years ago I operated my own clock repair shop. Very rewarding work, but I moved on to other things. However, during the course of time, I have collected lots of watches. But unlike clocks, I cannot perform maintenance on these watches. Your videos have motivated me to learn watch repair. I hope to find a watch-maker who will take me under his wing and show me the trade.
As a lot of your viewers, I have to take the time to thank you for sharing your knowledge and producing such excellent vides. After watching your videos on cleaning a mainspring I finally did it on my grandfathers 70's gold Roamer that was gaining 2hrs in 24. A tricky process but after 20minutes it is now running perfectly and more accurate than I could ever have imagined. Please keep up the excellent work I thank you for your videos.
You, sir, are a craftsman and a genius. You inspired me to attempt to repair my brother's 1022 calibre Omega Seamaster which had been dead for many years. While I spent many unhappy hours face down and ass up looking for components, I managed to repair the many faults. I just wish my brother had still been around to see it. Thank you so very much.
This guy is awesome, just love the professionalism. This watch repairing is just like my job as a motor technician on a micro scale, started buying some tools just slightly smaller than I usually do and might buy a project watch that’s not running next time. Made a cracking pillow from a lorry bearing race. Funny how making hand stitched leather watch straps got me hooked.
Sorry! but I suscribe all " ...Mark, I can't thank you enough for taking the time to share your knowledge, you are a first rate watchmaker. I read a chapter out of Henry Fried's book and then you give the visual instruction. This is the next best thing to sitting in a classroom. Great camera, great tools, great instructions... Thank you, "
Your channel is great! I am learning watch repair online and I find your channel the most useful tutorial by far! I especially like the troubleshooting videos. Please keep them coming and thanks!
i am old enough that i use a meiji scope on acrobat microscope stand to get close some timess and i catch myself running a camera to a big screen video tv. i love this video you do great work with what you got to work with
Hi Mark. Just seen this video which is great. Sorry to be a pedant but I believe the roller for the Cyma 234 mvt is, although unusual, made in two parts and the balance spring should have a Breguet overcoil.
Wish you would do a video on poising and adjusting the way you did for this watch. I mainly wish you would start posting vids again. You have such a mellow voice and I love your technique. Adjusting watches for positional errors has been the hardest thing for me to pick up on.
Hello Mark, thank you so much for bringing your expertise to even newbies like me. I've taken all 3 of your online courses and i feel like I'm ready to begin work on scrap movements, bringing them back to life. I also am creating an ETA 6478 watch based on your classes. I would love to see a tutorial on how to use the Bergeron Platex tool! Thank you for everything you do for the community!
Exceptional quality videos, Mark! I enjoy your wonderfully methodical workflow as you work with these old clockworks. I'm a newbie to the clock repair world, although an experienced mechanic on motorcycle and automobile engines in the past. It's delightful to see the same processes of analysis and approach to problem solving at work on such a diminutive scale! Wonderful work, thank you for sharing it!
Absolutely fascinating came from wristwatch revival and went to many other watch repair sites but you are absolutely spot on being a union ironworker it's just incredible how the same tools are used in machining/mechanical situations, it's incredible❗️ good job sir, thank you‼️®™️ ☑️☑️
There is also a small machine the size of a poising tool, which I don't believe is made anymore, called the "Mofres" from Bergeon which can be used to grind off a broken staff to facilitate removal with a staking tool. It has a very high speed motor and can be a bit scary to run as it throws sparks everywhere.
Mark Thankyou for all you have helped me with over the last six or seven years.. I have learnt so much... now to changing balance staff. Lovely job you are very gifted.. had one yesterday with the lump under the arm holding balance wheel in situ.. worked just as you said.. perfect time... can you use a staking set to remove balance staff.
When using a platax to remove a staff, I rotate the top part 90 degrees so the smaller relief in the base is below the hole in the disc; this provides more support to the disc. Additionally, if you keep the disc in place after roller removal, and rotary the top 90 degrees, the corresponding hole for staff removal will be lined up. Nice video.
@@WatchRepairChannel I was wondering if you could help me sir. I have a pocket watch from the 1900 elgin I purchased a watch offline and it has several issues which I was able to fix thanks to your videos. Balance staff, table Jewel, balance itself out of alignment, and hair spring. Now that the watch is cleaned and assembled and oil properly. Watch has come to life. I do not have a timing machine but I started timing the S hand with a stopwatch. I'm losing about four seconds every minute. I checked to make sure nothing was rubbing or touching or any crack jewels. All is good. The hair spring that I put in there is a number4 strength hairspring. My question to you sir if I put a hair spring that has less strength a 3 2 or a 1 would that speed up the watch
Lovely classic gestapo police watch. Imagine the eagerness in glancing at the time waiting for the evening untermensch hunt. so much history in that piece lovely
I am taking a baptism of fire with a pair of very old Vostok movements, one being late forties the other early fifties, both have the top pivots broken on, seems to be a common thing with these Russian ones, re markedly well built for a Soviet item and the older has 17 jewels, the younger 18 jewels. I do love the Soviet stars on the bigger of the showing gear wheels and very gingerly dismantled the younger movement and giving it a clean with the only issue being the balance staff's top nib has long gone.
Always was wondering what a staking tool was used for in watchmaking and now I know.as a person getting started in the hobby of watchmaking I don't think I'd ever have a need for tools such as this being I think any repairs on this level would be far beyond my skill set.im basically to where I'm somewhat comfortable with a simple disassembly,cleaning,oiling and reassembly of mechanical and automatic movements.think being that all my movements in watches are more common eta 2824 or sellita sw200 movements id just buy a whole new balance assembly if any type of work like this was ever needed to any of mine.lol.awesome work though.definately was a great lesson in watchmaking especially for a person like me learning as much as I can in order to work on my own watches.
Thank you for posting this video I commented asking if anybody knew where to get the roller for this and I got to messages so I have to on their way right now. Thanks for posting this now I know out of replace the roller
Mark, By all means please make a tutorial on the Platax Tool. I was so impressed with your video I just bought one. I have had rollers fly across the room never to be seen again using other tools. david
I have seen most of your videos and i like the way that you deal with them they are first class videos and can only say keep them coming well done ,full marks
Hi Mark. I replace the balance staff on an Illinois 12s 21 J PW this weekend and actually needed to hit down a bit harder than you did in this video. I used your, and the written technique and it turned out good. the only problem I had was when I replaced the Hairspring collet, I tapped down too hard with the stake and it bent the arm of the balance. I then needed to true the balance. btw, I had also replaced the impulse jewel successfully on this watch.
Sounds good, start soft and you will get a feel for it. For example, I tapped too hard on one occasion and the staff cracked in two right down the middle :)
Lee, poising is attaining neutral balance. The balance wheel is balanced between two points and allowed to swing freely. If poised it should stay where positioned and not swing down to the bottom. Basically balanced
All the cyma staffs I've ever installed were two piece rollers not saying you're was not single piece roller . I also prefer using inverto for fitting. Everybody has their preference of course.overall a nice job.
Hi Mark. Great Video, as are all of yours, would it be possible for you to do an in-depth one explaining the poising process. Both aspects if possible, the theory and the practical aspect, i have watched others but your style is much more watch able (no pun intended) than some others out there.
Hello and thank you for your video that are great. I think that to remove the balance staff you should have used the less large space on the side rotating the tool. Is much safer...best regards
Thank you for a really valuable video, I admire your workmanship and gentle/relaxed approach. I was wondering which loupe of choice are you using to look at the balance staff rivetting ?
Beautiful work and very nicely filmed, just a question: have you ever replaced a cylinder staff ? I have a clock on which I have to replace one and have never done it apart from that I got only one fitting staff and don' t want to ruin it, thanks.
Great vieo, really enjoyed your presentation. Clear and concise. Vintage watches is what I seem to work on most, and there are ALWAYS Gremilns to deal with. I feel the pain...Lol Thanks again. JM
I can't thank you enough for showing all your vids. I was a Nurse aide for 25 years and 3 years ago I broke my leg and had 3 operations on it. Because of that I can no longer be an Aide because of the lifting that's involved. So I had no other job skills but watch restoration was my hobby, but now I am stepping up my game and plan to sell some good quality vintage watches on ebay and some other places. Whenever I have a question about anything I know I can come here and learn what I need to know. Everything I have learned about this has been self taught from books and cd's. My father owns an office building and is giving me an office to set up a shop and leave the limited space of my man cave. But if I was asked who my mentor was I would have to say you. You have helped me a great deal, it has quite literally been a life changer. Thanks again! Link..... And yes that is my real name lol.....
Good luck with your new venture, hope you are successful.
Five years later and I hope that you’re doing better Karin 😊
I have no training in watch repair, but I am very mechanical. It is a joy to watch you work and makes perfect sense.
There's something enormously appealing about the "old" watch & clock maker/repairer. It fascinates me over again to return to this which was one of my very first engineering interests. The snag back then was that you can't let a kid loose amongst expensive movements. The necessary tools cost "loadsa money" - UNLESS you are going to use them to make some money and pay for themselves. Thanks for the superb videos and the honest comentary. You're Mark - right? Lovely job Mark!
You truly are a MASTER at what you do. I'm amazed at the amount of precision components and work necessary to service them. It is an art. Thanks Again.
I been repairing watches since I was 14 I now I am into my mid 70s first time I've watched a video on watch repairing thank you done a marvellous job showing people how it's done in my day the only way to learn was to be taught by other watch makers well done
When I see how well crafted these videos are, along side of your extensive knowledge, I realize how lucky we are to share in your knowledge. Thank you so much for not only your fine skill in horology but the file portrayal of your skills imparted upon us. Thanks many times over!!
I don't know a single thing about watches but these videos are fantastic. Very relaxing, well made, and educational. It's a great way to learn about such a fascinating world of such precise engineering.
A great little how to do this video.
My second visit as this is my next job in hand and I needed a refresher!
I have been putting it off for far to long to try and learn the PROPER WAY to perform a lot of repair techniques that I really needed to learn how to do. Now that I have seen this Gentleman's videos, I am ashamed that I put this off so long. He makes everything so crystal clear that I am finding it to not be as difficult to do these more difficult repairs as I once thought. A BIG thumbs up for ALL of this Gentleman's watch repair video's. Thanks a lot, Mike
It is fascinating seeing all being prepared and the new parts sequentially being put back, making sure that the tools are well lined up for such accuracy. Congratulations for your skills .
Can you touch more on what side of staff holds Jewel vs spring and what side goes where when installing back into wheel.
Many years ago I operated my own clock repair shop. Very rewarding work, but I moved on to other things. However, during the course of time, I have collected lots of watches. But unlike clocks, I cannot perform maintenance on these watches. Your videos have motivated me to learn watch repair. I hope to find a watch-maker who will take me under his wing and show me the trade.
As a lot of your viewers, I have to take the time to thank you for sharing your knowledge and producing such excellent vides. After watching your videos on cleaning a mainspring I finally did it on my grandfathers 70's gold Roamer that was gaining 2hrs in 24. A tricky process but after 20minutes it is now running perfectly and more accurate than I could ever have imagined. Please keep up the excellent work I thank you for your videos.
You, sir, are a craftsman and a genius. You inspired me to attempt to repair my brother's 1022 calibre Omega Seamaster which had been dead for many years. While I spent many unhappy hours face down and ass up looking for components, I managed to repair the many faults. I just wish my brother had still been around to see it. Thank you so very much.
This guy is awesome, just love the professionalism. This watch repairing is just like my job as a motor technician on a micro scale, started buying some tools just slightly smaller than I usually do and might buy a project watch that’s not running next time. Made a cracking pillow from a lorry bearing race. Funny how making hand stitched leather watch straps got me hooked.
Superb, absolutely superb. The close up photography is wonderful, and not easy! Thank you
Great camera work, and just the right length and details. Your addvice as when to use the hammer and when not is great, Good woork.
I have to say that of all the content on you tube this is without doubt my favourite channel .
It's people like you we need around. I am still looking for someone to apprentice with, but so far, I haven't been successful
I really love your work! I'm just a beginner, and your demonstrations are really helping me.
Bravo! The level of precision at this scale is mesmerizing! Inspired by your channel, many thanks!
A fantastic video, thanks Mark. I can't believe how well you film these videos. I am grateful to have found your channel.
Sorry! but I suscribe all " ...Mark, I can't thank you enough for taking the time to share your knowledge, you are a first rate watchmaker. I read a chapter out of Henry Fried's book and then you give the visual instruction. This is the next best thing to sitting in a classroom. Great camera, great tools, great instructions... Thank you, "
Mark,Ive watched everyone of your videos .Sir You are a True Jedi Master at your work!
This TH-cam channel is changing my life.
Your channel is great! I am learning watch repair online and I find your channel the most useful tutorial by far! I especially like the troubleshooting videos. Please keep them coming and thanks!
hi Are you success in learn watch repair online please give me advice in this filed
What a great help your vids provide. Thanks so much for your continuing support of the novice watch repairer. 👍
15.58 the new balance staff has a bent pivot, who else noticed?
Indeed great tutorial!
...if the pivot is bent, you might as well start all over again!!
Breathtaking open heart operation. ❤ .. thanks.
i am old enough that i use a meiji scope on acrobat microscope stand to get close some timess and i catch myself running a camera to a big screen video tv. i love this video you do great work with what you got to work with
The Bob Ross of watch repair :)
Beautiful work. Always enjoy watching your craftsmanship.
many thanks for sharing your knowledge.on watches, I just love watching a good tradesman/woman at work.
Unbelievable job ! Yes, some genius can do this perfect job. I really love you Sir !
Wow, so inspiring to watch your videos, so much passion and dedication in what you do.
Subscribed and inspired. Really like your calm,easy going and very knowledgable manner.Thank you.
Thanks Andrew :)
Hi Mark. Just seen this video which is great. Sorry to be a pedant but I believe the roller for the Cyma 234 mvt is, although unusual, made in two parts and the balance spring should have a Breguet overcoil.
Wish you would do a video on poising and adjusting the way you did for this watch. I mainly wish you would start posting vids again. You have such a mellow voice and I love your technique. Adjusting watches for positional errors has been the hardest thing for me to pick up on.
Hello Mark, thank you so much for bringing your expertise to even newbies like me. I've taken all 3 of your online courses and i feel like I'm ready to begin work on scrap movements, bringing them back to life. I also am creating an ETA 6478 watch based on your classes.
I would love to see a tutorial on how to use the Bergeron Platex tool! Thank you for everything you do for the community!
Exceptional quality videos, Mark! I enjoy your wonderfully methodical workflow as you work with these old clockworks. I'm a newbie to the clock repair world, although an experienced mechanic on motorcycle and automobile engines in the past. It's delightful to see the same processes of analysis and approach to problem solving at work on such a diminutive scale! Wonderful work, thank you for sharing it!
Amazing skill! There are some smart people in this world!
Appreciate the precise skill, guidance and information.it’s really a genius work.
Absolutely fascinating came from wristwatch revival and went to many other watch repair sites but you are absolutely spot on being a union ironworker it's just incredible how the same tools are used in machining/mechanical situations, it's incredible❗️ good job sir, thank you‼️®™️ ☑️☑️
Very nice & clean work. ..Thank you very much for sharing the video.
Incredible work. Thank you so much for sharing!
I would love to see a video on how you did the dynamic poising / positional corrections. Thanks for this one!
Thanks for the superb videos and the honest comentary.
Please, make a tutorial how to use PLATAX tool.
Thank You for your videos.
In our class, at watchmaker's school, we were told to use the lathe to remove the old balance staff. I prefer this method.
There is also a small machine the size of a poising tool, which I don't believe is made anymore, called the "Mofres" from Bergeon which can be used to grind off a broken staff to facilitate removal with a staking tool. It has a very high speed motor and can be a bit scary to run as it throws sparks everywhere.
Outstanding as always. Thank you Mark!
Watching you work on watches is like doing heroine for me. It's such a pleasure learning from you. Thank you.
excellent demonstration.
Bravo, great video great passion and great work . Thank you for this video and GOD bless you, your family and your country.
Thankyou I learned alot
Thanks for your great share. Your video is very expert and helpful for me to understand how the balance wheel working and assembly.
Great videos, perfect filming and great commentary! Would love to see a playtex video and or a staking set video!
Truly one awesome video and so educational! Thank you!
Mark Thankyou for all you have helped me with over the last six or seven years.. I have learnt so much... now to changing balance staff. Lovely job you are very gifted.. had one yesterday with the lump under the arm holding balance wheel in situ.. worked just as you said.. perfect time... can you use a staking set to remove balance staff.
now thats the reason why i love mechanical watch
I would love to see a tutorial on how to use the platax tool
When using a platax to remove a staff, I rotate the top part 90 degrees so the smaller relief in the base is below the hole in the disc; this provides more support to the disc. Additionally, if you keep the disc in place after roller removal, and rotary the top 90 degrees, the corresponding hole for staff removal will be lined up.
Nice video.
Good tips Andy :) thanks for watching.
@@WatchRepairChannel I was wondering if you could help me sir. I have a pocket watch from the 1900 elgin I purchased a watch offline and it has several issues which I was able to fix thanks to your videos. Balance staff, table Jewel, balance itself out of alignment, and hair spring. Now that the watch is cleaned and assembled and oil properly. Watch has come to life. I do not have a timing machine but I started timing the S hand with a stopwatch. I'm losing about four seconds every minute. I checked to make sure nothing was rubbing or touching or any crack jewels. All is good. The hair spring that I put in there is a number4 strength hairspring. My question to you sir if I put a hair spring that has less strength a 3 2 or a 1 would that speed up the watch
Looking at the balance again there is a lot of Wobble. Jewel holes? Shake? Runs well anyway. Thanks Mark. Old watch I know.
Lovely video. Thanks for filming.
Always making great videos. Thanks.
Lovely classic gestapo police watch. Imagine the eagerness in glancing at the time waiting for the evening untermensch hunt. so much history in that piece lovely
Thank you for your exceptional tutorials!
Watching from Philippines brother, thank you for sharing.
I am taking a baptism of fire with a pair of very old Vostok movements, one being late forties the other early fifties, both have the top pivots broken on, seems to be a common thing with these Russian ones, re markedly well built for a Soviet item and the older has 17 jewels, the younger 18 jewels. I do love the Soviet stars on the bigger of the showing gear wheels and very gingerly dismantled the younger movement and giving it a clean with the only issue being the balance staff's top nib has long gone.
Superb job! Congratulations Mark, learning and enjoying a lot with your exceptional videos cheers
Thanks for the encouragement :)
Always was wondering what a staking tool was used for in watchmaking and now I know.as a person getting started in the hobby of watchmaking I don't think I'd ever have a need for tools such as this being I think any repairs on this level would be far beyond my skill set.im basically to where I'm somewhat comfortable with a simple disassembly,cleaning,oiling and reassembly of mechanical and automatic movements.think being that all my movements in watches are more common eta 2824 or sellita sw200 movements id just buy a whole new balance assembly if any type of work like this was ever needed to any of mine.lol.awesome work though.definately was a great lesson in watchmaking especially for a person like me learning as much as I can in order to work on my own watches.
Such expertise!Great video!
Thank you for posting this video I commented asking if anybody knew where to get the roller for this and I got to messages so I have to on their way right now. Thanks for posting this now I know out of replace the roller
عمل متقن رائع ...استمتع جدا بمتابعة اعمالك ...احسنت نوفك
Mark,
By all means please make a tutorial on the Platax Tool. I was so impressed with your video I just bought one. I have had rollers fly across the room never to be seen again using other tools.
david
Yes - the Platax tool is very useful. I will try to schedule this in :)
Wonderful, Nice steady work
Thanks for this and for a timely tuition... Just about to do one.. My first one..
You ara a excelent professional!!! Congratulation!!!
I have seen most of your videos and i like the way that you deal with them they are first class videos and can only say keep them coming well done
,full marks
Nice work. Congrats & Thanks
Great job! I suspect the previous balance staff was taken out using a lathe, that's how you get the countersink.
Another masterpiece!
Hi Mark. I replace the balance staff on an Illinois 12s 21 J PW this weekend and actually needed to hit down a bit harder than you did in this video. I used your, and the written technique and it turned out good. the only problem I had was when I replaced the Hairspring collet, I tapped down too hard with the stake and it bent the arm of the balance. I then needed to true the balance. btw, I had also replaced the impulse jewel successfully on this watch.
Sounds good, start soft and you will get a feel for it. For example, I tapped too hard on one occasion and the staff cracked in two right down the middle :)
Thanks
Gracias muy buena clase, lo recordé de nuevo y eres un gran instructor, felicitaciones. 👍
Great work. In my land I have to use watches until they are terminated or not using it at all..no watchmakers. Thank you.
Ok, you lost me on the "poising" of the spring. I have no idea what that means or how to do it. BUT, this video was fascinating none the less! Thanks.
Lee, poising is attaining neutral balance. The balance wheel is balanced between two points and allowed to swing freely. If poised it should stay where positioned and not swing down to the bottom. Basically balanced
Very good work thanks for you 👍👏
All the cyma staffs I've ever installed were two piece rollers not saying you're was not single piece roller . I also prefer using inverto for fitting. Everybody has their preference of course.overall a nice job.
Totally awesome 👌
beautiful job end professionally from Grigoriy
Hi Mark. Great Video, as are all of yours, would it be possible for you to do an in-depth one explaining the poising process. Both aspects if possible, the theory and the practical aspect, i have watched others but your style is much more watch able (no pun intended) than some others out there.
Your videos are the best good stuff
I'd love a Platax tool, but used on Ebay they go for up to $780. I use my staking set and so far, so good.
My grandpa used to work for this brand when he was 16 years old he worked there for 1 year and went to a new job
Hello and thank you for your video that are great. I think that to remove the balance staff you should have used the less large space on the side rotating the tool. Is much safer...best regards
I mean on the Platax tool
it is an exceptional video! thank you very much.
Thank you so much for this great video
Thank you for a really valuable video, I admire your workmanship and gentle/relaxed approach. I was wondering which loupe of choice are you using to look at the balance staff rivetting ?
Beautiful work and very nicely filmed, just a question: have you ever replaced a cylinder staff ?
I have a clock on which I have to replace one and have never done it apart from that I got only one fitting staff and don' t want to
ruin it, thanks.
Great vieo, really enjoyed your presentation. Clear and concise. Vintage watches is what I seem to work on most, and there are ALWAYS Gremilns to deal with. I feel the pain...Lol Thanks again. JM
Thanks JM - it's never a dull day in this business :)
Nice video. greetings from Rotterdam 😉
Hi Mark
Very nice work and I have learned a lot. Please give us a video on how to dynamically poise the balance wheel. Thanks very much
Hap Cardwell