Ep. 29 Wiring your vintage camper rebuild renovation the easy way. Retro Serro Scotty restoration

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ต.ค. 2024
  • Rob wires the 1964 Scotty Serro sportsman vintage camper. Wiring the vintage travel trailer with four pin connector. Running lights, turn signals.#camper #vintage #scotty #glamping #rebuild #remodel #rv #vanlife #1964 #camperrebuild #camperremodel #campinglife #glampinglife #Wiring #vintagecamperbuild #Vintagecamperrebuild #vintagecamperremodel #vintagecamperrenovation
    Music by:
    We Are One by Vexento / vexento
    / vexento
    Free Download / Stream: bit.ly/2PaIKcR

ความคิดเห็น • 26

  • @ramonalee392
    @ramonalee392 2 ปีที่แล้ว +2

    OMG FINALLY Someone explaining clearly how to use the brown wire to running lights! Thank u sooooo much!!!

    • @RobTheRebuilder
      @RobTheRebuilder  2 ปีที่แล้ว +1

      It can get confusing.

    • @ramonalee392
      @ramonalee392 2 ปีที่แล้ว

      And my running lights have a white wire do I have to ground it? If so, can I just use a screw and attach it to fibreglass?

  • @RRmaga777-55
    @RRmaga777-55 2 หลายเดือนก่อน +1

    Great information.

  • @talldude5841
    @talldude5841 3 ปีที่แล้ว +1

    Looking better everyday Rob.

  • @billiamc1969
    @billiamc1969 2 ปีที่แล้ว +1

    I found it far better to route wires inside the trailer so there are no issues with frayed wires

  • @thejourneymen7722
    @thejourneymen7722 2 ปีที่แล้ว +1

    How does the skin of the trailer ground to the frame for the single wire clearance lights was there originally some type of ground strap.

    • @RobTheRebuilder
      @RobTheRebuilder  2 ปีที่แล้ว

      Jump wire from white ground to skin.

  • @cheloagain7228
    @cheloagain7228 ปีที่แล้ว +1

    The trailer dont need a bumper on back ?

    • @RobTheRebuilder
      @RobTheRebuilder  ปีที่แล้ว

      Many do not come from the factory with a bumper

  • @JoseGarcia-cl4kr
    @JoseGarcia-cl4kr 2 ปีที่แล้ว +1

    good job where do i buy the lights go sideways

    • @RobTheRebuilder
      @RobTheRebuilder  2 ปีที่แล้ว +1

      I get them on Vintage Trailer Supply

    • @joegugala6992
      @joegugala6992 2 ปีที่แล้ว

      @@RobTheRebuilder I had the exact same question, thank you for all your tips and tricks with this.
      Do you ever add your parts that you order as a link to your videos you post?
      Thank you again for the great videos!

  • @miguelvelez1536
    @miguelvelez1536 ปีที่แล้ว +1

    Where you did you purchase these tail lights?

  • @rickkempsell5076
    @rickkempsell5076 2 ปีที่แล้ว +1

    In previous videos you mentioned using butyl tape to seal the windows. Do you prefer that tape over putty tape? If so, why?

    • @RobTheRebuilder
      @RobTheRebuilder  2 ปีที่แล้ว +3

      I don't know what putty tape is. They used butyl tape from the factory and still use it today so thats why I use it.

    • @cheloagain7228
      @cheloagain7228 ปีที่แล้ว

      I went to home depot, they didn't have eighter ,so I guess I'll caulk

    • @RRmaga777-55
      @RRmaga777-55 2 หลายเดือนก่อน

      @@cheloagain7228 To caulk or not to caulk, there is the question.

  • @robertlowe9673
    @robertlowe9673 3 ปีที่แล้ว +2

    Where did you get the tail lights

    • @RobTheRebuilder
      @RobTheRebuilder  3 ปีที่แล้ว +1

      www.amazon.com/Partsam-Lights-Chrome-trailer-lights/dp/B06Y1Z1G1R/ref=sr_1_2?crid=1QFTYYVLR3O0G&dchild=1&keywords=vintage+camper+tail+lights&qid=1626622772&sprefix=vintage+camper+tai%2Caps%2C169&sr=8-2