Good idea with the RF hub placement. I built a shelf and placed mine above the spare tire. Once you figure out the rear door wiring, everything will work like normal. The front doors with the modules and sensors are more of a PIA. The easiest placement for the camera is on the rear bumper above the license plate. Use the charger OEM outer bracket. It’s not perfect, the camera aims a little bit high. The perfect spot in the third brake light location. But that requires more modification and wiring. Dodge magnum swap is the most complicated swap of all Dodge LXs. Welcome to the club.
The upper sections of the rear seats are super easy to swap. I know zero about upholstery and had the covers swapped to the frames in about 2 hours. Also you can just take the staples out of the charger side bolsters, remove the fabric and put it over the magnum bolsters, then restaple it. Appreciate you going in depth with all you ran into on the swap. As always looks great.
I swapped the rear covers on my magnum. The magnum is a little bit different than other LXs, the frame is metal and not a 100% match. The center cup holder is not the same. Since no one really ever sits in the back of my car I’m going to remove the anchors and permanently attached them to the frame with the 2015 plastic inserts. I’m also installing an air ride setup so I won’t be folding my rear seats anymore. I removed the staples on the side bolsters like you did and fits perfect.
Bro. This is where all the magic happens. Right here. Home of the Great Lakes where all of your SRT DREAMS come true. Proud of you bro. Keep rising as you usually do.
Good information. I had to modify the brake booster mounting for My 2006 Magnum. Dodge must have change the bolt pattern in 2008. So anyone interested in a magnum swap, source a 2008.
The side airbag curtains will also bolt right in. The magnum headliner covers it no problem. The dome light thing may need to be swapped as well as sun visors. Swapped on mine, but I don’t remember if it was necessary. How did you wire the taillights? The constant power to the charger center light can be tricky.
Love the content!!! I admire those that have the resources to make what they want. Keep putting out a great experience for those who dream of it 👌🏾👍🏾💪🏾👊🏾✊🏾✌🏾
Junkyard Dave on TH-cam has been building a Dodge Charger hellcat magnum for the past 2 years (with the new style charger) he’s almost done with it everything custom! Also AWD
Bro you are a mad scientist when it comes to these hellcat swaps and builds and you go threw every single detail of the build and make it look so easy to do keep up your good works!!
I am really happen you and junkyard dave are making a hellcat magnum. They deserve to have that supercharger in them man. Big respect i always loved the magnum body style. I want to buy one from you one day.
The rear seat fabric is held by rings… all you have to do is use the back support from swap the foam and you are golden… oh they latch different so I just cut a slit
2008 is a one year only font in those head lights core support fenders hood and fascia are super hard to find and pricy I hope they didn’t go in the trash
I just enjoy ingenuity. Seein what can be done that should’ve been done that they wouldn’t do. I been rockin wit you since you sold lil baby the first 300. Next time I’m in Detroit I’m goin to hope to tap in with you.
Is it safe buying a charger or challenger in Michigan if your not from there? 99% are stolen and rebuilt title but I been seeing some hellcats and scats for reasonable prices
I have a 2005 awd 5.7 . If i want to swap the engine to a srt or hellcat motor, do i need to to change the whole interior harness? Cause i dont mind keeping my original dashboard and rest of the interior. I just need a new engine and thought i might as well throw in the srt . But not if i have to change the whole interior. It would be dope but thats to much work.
Random question I have a 2010 dodge journey I know (soccer ⚽ mom car) but I think I'm having problems with my ecm I just installed new coil packs and plags and I still have misfire code if I was to get a used or new ecm will it work as soon as I connect it or will I have to get it programmed from dodge dealer??
@@Eyewokkk tbh it looks good woth a Chrysler front end A guy built one in Miami in a goldfish color it looked good asf but everyone got they own style and opinion and also it's his build to
really great swap .......where can i get a complete set of brake lines...?..cant get them at the dealer i have a 07 charger...would u have a set like new ,,? you could maybe ship ..?..
Bro I told u exactly how to do the swap I don’t have to fab shit only thing is drill holes for the brake booster takes no fab work but head light wire clips and tail light and trunk camera and doors u just use charger parts for the door modules shits not hard at all been done to many times and passenger side seat u have to use the magnum seat rail like I told ya day one
Skills. Nice work. Since ur spreading out the swap models will a hellcat powertrain bolt into an older E-class Benz??? I mean the 300's and the Magnums were sharing the E-class platform when Benz bought chrysler. Can u build a hellcat powered E-55 Benz?
I love the charger and everything but I hate the infotainment system Do you think there's any way to put a TRX infotainment system on it or any big android screen on it any advice khal?
I would just like someone anyone to say what modules you have to have in order to fire up the engine...I am doing a swap but not using any suspension parts ie struts..but probably update to and speed sensors so speedo will work it's a 2018 swap into a 2000 Dakota pu I got dash, engine bay, and floor harnesses charger dash and heater/ac box just need to know bare minimum of modules to get engine to start...any help would be great thanks.
What's up Khal? I lucked up on Ur channel by looking for videos on Hellcat conversions for 300s. I have a 2010 300C 5.7 that I inherited from my Mama. I was going to try to convert it but It's too clean, with low miles. I have found a Dodge Magnum for REALLY cheap, I'm gonna buy the car even if I don't build it. My question is do you think that someone that has never done a Hellcat swap can get this done? I have been working on cars my hole life, but never none of the new stuff this far in. I would like a good project and I love MOPAR. Three duallys and the 300. Please give me your honest opinion.
Bro how am I just now finding out your channel !!!😮💨 your content is crazy and honestly I feel like I’m learning a lot while I watch ya vids man deff earned my sub from the first vid I watched !🙌🏽
First Drive Video Coming Soon! Subscribe :)
I fuck with your channel bro
Good idea with the RF hub placement. I built a shelf and placed mine above the spare tire.
Once you figure out the rear door wiring, everything will work like normal. The front doors with the modules and sensors are more of a PIA.
The easiest placement for the camera is on the rear bumper above the license plate. Use the charger OEM outer bracket. It’s not perfect, the camera aims a little bit high. The perfect spot in the third brake light location. But that requires more modification and wiring.
Dodge magnum swap is the most complicated swap of all Dodge LXs. Welcome to the club.
What was the cost for this swap I know you have mentioned it
Thanks big guy . That's what we need on this one.
khal i have a 05 chrysler 300c and want to do a dash swap from a newer 300? would it be just a quick swap and bolt on or do i have to modify anything?
The upper sections of the rear seats are super easy to swap. I know zero about upholstery and had the covers swapped to the frames in about 2 hours. Also you can just take the staples out of the charger side bolsters, remove the fabric and put it over the magnum bolsters, then restaple it. Appreciate you going in depth with all you ran into on the swap. As always looks great.
I swapped the rear covers on my magnum. The magnum is a little bit different than other LXs, the frame is metal and not a 100% match. The center cup holder is not the same.
Since no one really ever sits in the back of my car I’m going to remove the anchors and permanently attached them to the frame with the 2015 plastic inserts.
I’m also installing an air ride setup so I won’t be folding my rear seats anymore.
I removed the staples on the side bolsters like you did and fits perfect.
Do one of you have photos of your back seat
Bro. This is where all the magic happens. Right here. Home of the Great Lakes where all of your SRT DREAMS come true. Proud of you bro. Keep rising as you usually do.
Good information. I had to modify the brake booster mounting for My 2006 Magnum.
Dodge must have change the bolt pattern in 2008. So anyone interested in a magnum swap, source a 2008.
Definitely one of the best to do hellcat swapped builds, keep up the great work
Bro... you're the goat of hellcat swaps. My anxiety would kick in trying to do all that.
With the rear seats you have to just get the back locking mechanism out the charger and swap it in the magnum
Your work ethic is incredible bro. Killin it!
The side airbag curtains will also bolt right in. The magnum headliner covers it no problem. The dome light thing may need to be swapped as well as sun visors. Swapped on mine, but I don’t remember if it was necessary.
How did you wire the taillights? The constant power to the charger center light can be tricky.
Love the content!!! I admire those that have the resources to make what they want. Keep putting out a great experience for those who dream of it 👌🏾👍🏾💪🏾👊🏾✊🏾✌🏾
Junkyard Dave on TH-cam has been building a Dodge Charger hellcat magnum for the past 2 years (with the new style charger) he’s almost done with it everything custom! Also AWD
Not to mention his has a full AWD system
Dave shit not really a magnum tho
That's a charger with Magnum body pieces molded on, it's cool but it was never a Magnum.
Bro you are a mad scientist when it comes to these hellcat swaps and builds and you go threw every single detail of the build and make it look so easy to do keep up your good works!!
He has his fam as well
Let’s build you a website Khal. You could be dishing these builds out very often.
Rear camera can go by the third brake light, put in place of rear wiper nozzle and relocate nozzle to other side of brake light or make a new hole.
He should put the 300 srt front end on it like what they sold overseas
Khal, it looks like it would be easier to put that r view camera in the spoiler, to the right of the chmsl/"3 brake light"
You can just wire a resistor into the roof airbag plug.
It’ll make the computer think there’s an airbag plugged into it.
The magnums look clean with the rear wiper arm delete…. If you did that you could place the camera in that hole
I am really happen you and junkyard dave are making a hellcat magnum. They deserve to have that supercharger in them man. Big respect i always loved the magnum body style. I want to buy one from you one day.
The locking bracket for the rear seat back is all you need to make them work. Swap them with the stock magnum bracket.
Excellent tutorial as always, much appreciated! Great work on this project.
Thanks man! I always enjoy your videos!
The rear seat fabric is held by rings… all you have to do is use the back support from swap the foam and you are golden… oh they latch different so I just cut a slit
A VIDEO THAT ACTUALLY APPLYS TO ME FINALLY
I would like to see the wk1 srt8 jeep interior swap
Oh Look Like the Door Panels doesn't need to Be Swapped too! Nice! The Magnum Door Panels Fits in, Looks Like.. ?
Yea, 08 is the only one the booster works on. Others beware, it's not bolt on for 07 and back
2008 is a one year only font in those head lights core support fenders hood and fascia are super hard to find and pricy I hope they didn’t go in the trash
Can I use the challenger front & rear cradle on the magnum
2:07 ohhh I’ve been wondering why I haven’t been seeing this
Can’t wait till you do a swap into a 07-10 charger.
Use the charger door panels so that the vents work. Then you can use the charger door lock controls and speakers and just repin the window actuator.
Son Magnum is gonna be so dope! Would’ve been even better if he could’ve gotten the new rear taillight.
i think some of the issues is it's an sxt model and not an rt model - my rt had curtain airbags
Damn I wish you lived in Texas. I have a 2006 magnum that I want to do a Hellcat swap. But I’m happy to know everything drops right in place
Been loving the videos lately
I got a hemi magnum sitting in my front yard and a 69 Camaro SS 383 stroker sitting in the garage 🤪 and bouta LS1 swap my bros 1965 impala ss
Car looks a lot better back in red!!!!
We need a AWD hellcat pls
2 ohm resistors for the curtain air bags.
Look for a similar fitting 3rd brake light with the back camera in the middle.
You can use the front doors off the charger the back doors are different you can look up junkyard Dave he is building an all wheel drive magnum
I just enjoy ingenuity. Seein what can be done that should’ve been done that they wouldn’t do. I been rockin wit you since you sold lil baby the first 300. Next time I’m in Detroit I’m goin to hope to tap in with you.
Is it safe buying a charger or challenger in Michigan if your not from there? 99% are stolen and rebuilt title but I been seeing some hellcats and scats for reasonable prices
Icant wait to see dis done i been waitn for da longest for somebody to do dis swap 💯💯
I gotta say.........U are the truth with these cars!!!!💯💯💯💯💯💯💯
Magnum looking good
I have a 2005 awd 5.7 . If i want to swap the engine to a srt or hellcat motor, do i need to to change the whole interior harness? Cause i dont mind keeping my original dashboard and rest of the interior. I just need a new engine and thought i might as well throw in the srt . But not if i have to change the whole interior. It would be dope but thats to much work.
How did u get the door locks and handles to work did u use the durango locks and handles
Khal when you gone do one on the 1st gen charger we want that one
Since the first gen charger and 300 are essentially the same car as the magnum, then you could probably apply all of this info to and LX gen Chrysler
When you gone finish I been waiting I watch your every time you drop
Can you do a vid on how to wire up the doors?
If you build another one how much would you sell one like that for
i know i won’t get a response BUT can you do a hellcat swapped avenger ??
How much you askin ?
Random question I have a 2010 dodge journey I know (soccer ⚽ mom car) but I think I'm having problems with my ecm I just installed new coil packs and plags and I still have misfire code if I was to get a used or new ecm will it work as soon as I connect it or will I have to get it programmed from dodge dealer??
Did you have to change both the airbox out in the inside where the dashboard goes are did you leave the old ones in???🤔
ultimate family car
How much is it to do a swap on a 300c?
Change the front to a chrsyler
@@DJ-or8jq nah
Fuck would he do that for? That would be dumb
@@Eyewokkk tbh it looks good woth a Chrysler front end A guy built one in Miami in a goldfish color it looked good asf but everyone got they own style and opinion and also it's his build to
@@rdstv5588 i built a red one 1 2019 using a 17 charger front clip.....
@@DJ-or8jq hell nah boy
Can a new Chrysler dash fit in a first gen Chrysler ?
If you could i would try to put the new fender and bumper from the new charger
Aww nvm he said they putting the new bumper in
really great swap .......where can i get a complete set of brake lines...?..cant get them at the dealer i have a 07 charger...would u have a set like new ,,? you could maybe ship ..?..
Bro I told u exactly how to do the swap I don’t have to fab shit only thing is drill holes for the brake booster takes no fab work but head light wire clips and tail light and trunk camera and doors u just use charger parts for the door modules shits not hard at all been done to many times and passenger side seat u have to use the magnum seat rail like I told ya day one
So what about the back windows ? I’m doing a swap on my 08 charger but I keep hearing ima have to do a stand alone harness
Damn bro, what's the name of that intro song it sounds so damn good?? Thank you brother
Dope build, Definitely need one of these. 🔥🔥🔥
You should have used junkyard Dave's videos for reference. He's been building one for some time now.
Khal you should do a sleeper build. 😂🙏 but anyways your builds straight🔥
Skills. Nice work. Since ur spreading out the swap models will a hellcat powertrain bolt into an older E-class Benz??? I mean the 300's and the Magnums were sharing the E-class platform when Benz bought chrysler. Can u build a hellcat powered E-55 Benz?
if you did a 2006 or 2007 would it just bolt right in or would you have to move the firewall and trans tunnel?
I don’t think there is a difference with years for the booster
Thank you for sharing this! You just answered every question I was going to ask!
Beast mode I love the content blessings brotha to you and the team💪🏾
What’s a good way to get ahold of khal I have a first gen 300 trying to swap it
It's alive!!!!!👏🏾👏🏾
I love the charger and everything but I hate the infotainment system Do you think there's any way to put a TRX infotainment system on it or any big android screen on it any advice khal?
I would just like someone anyone to say what modules you have to have in order to fire up the engine...I am doing a swap but not using any suspension parts ie struts..but probably update to and speed sensors so speedo will work it's a 2018 swap into a 2000 Dakota pu I got dash, engine bay, and floor harnesses charger dash and heater/ac box just need to know bare minimum of modules to get engine to start...any help would be great thanks.
New Chrysler 300 door panel bolt in I read.
How much for a package? I have a 08 magnum I want to build‼️‼️
What's up Khal? I lucked up on Ur channel by looking for videos on Hellcat conversions for 300s. I have a 2010 300C 5.7 that I inherited from my Mama. I was going to try to convert it but It's too clean, with low miles. I have found a Dodge Magnum for REALLY cheap, I'm gonna buy the car even if I don't build it. My question is do you think that someone that has never done a Hellcat swap can get this done? I have been working on cars my hole life, but never none of the new stuff this far in. I would like a good project and I love MOPAR. Three duallys and the 300. Please give me your honest opinion.
What about the door panels u will swap it for the charger ones ?
You tried track hawk back seats
Is there a way to use the factory magnum harness or do I have to swap harness and all the computers for everything to work
you can swap those covers yourself its really simple
What year charger did all the parts come from?
Could you put a 392 in a dodge grand caravan ?
Bro how am I just now finding out your channel !!!😮💨 your content is crazy and honestly I feel like I’m learning a lot while I watch ya vids man deff earned my sub from the first vid I watched !🙌🏽
Where u been
Everything bolt up with swapping 6.4 scat motor in a magnum too?? I’m tryna 6.4 into my magnum
Yo quick question, where did you get that dashboard, I’m trying to get one like that but don’t know if it’ll fit on mines. I got a 05 magnum.
Bruh what about the door panels can you use the ones off the charger?
It's gonna be beautiful
I got a 14 jeep srt trying to buy a hell cat engine but he don’t have a inter cooler do I need that for it to run
My guy..what do u charge and where are located?
What’s the year and what year swap did u use
How much is something like this
Seriously!! About to pick up a mag and engine ❤
Keep the sxt badge on it 😂
Can you put a hellcat in a 2012 Chevy Tahoe ppv
I have a 2006 300c and I want a hellcat motor in it I know you can do it
Are you still trying to hellcat swap the new grand Cherokee?
Could’ve at least got a str8 magnum dat way u have more room & more SRT details
How much did you charge for something like this