Nissan Rogue Differential and Transfer Case Fluid Change

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ก.พ. 2025

ความคิดเห็น • 110

  • @jagmann99
    @jagmann99 3 ปีที่แล้ว +10

    I wasn't sure if I should bust out the glow sticks and start dancing or changed the diff and transfer case oil. Good video!

  • @6speeddakota
    @6speeddakota 6 หลายเดือนก่อน +1

    I'm liking the marine lubricant pump. I recognize that thing from the hundreds of gear oil changes I've done on boats over the years

  • @ckkrons2338
    @ckkrons2338 7 หลายเดือนก่อน +1

    My 2019 AWD took only one quart to do both front and rear. 10mm hex on all four plugs. Thanks for the video!

  • @jovonerobinson4945
    @jovonerobinson4945 21 วันที่ผ่านมา

    Yeah i will be doing this at the end of the month. Excited. Thank You

  • @johngoedhard8459
    @johngoedhard8459 3 ปีที่แล้ว +7

    For the rear differancial. Are you loosening the bolts by turning them clockwise and for tightening turning the bolts counter-clockwise? Backwards thread or is the camera showing a mirrored image.

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว +7

      Good eyee, Bro. Im using my phone front camera, so it was showing the opposite direction. Sorry for the confusion

    • @YUFlysofast
      @YUFlysofast 3 ปีที่แล้ว +3

      This is the comment I was looking for

    • @greg7038
      @greg7038 2 ปีที่แล้ว

      Can you clarify? Is it reverse threaded or not? Which way to tighten and loosen in terms of clockwise or counterclockwise?

    • @customer7575
      @customer7575 2 ปีที่แล้ว +1

      99.99% of time it’s usually lefty loosey, righty tighty.

    • @robbiemcneill4239
      @robbiemcneill4239 2 ปีที่แล้ว +1

      @@greg7038 it is not reverse threaded.

  • @barryjameson3113
    @barryjameson3113 ปีที่แล้ว +2

    This seems filmed in reverse or submitted in reverse, because he is turning the bolts to tighten in order to loosen?????

    • @NorCalOutdoor
      @NorCalOutdoor  ปีที่แล้ว

      Yes, I was using my phone front camera and forgot to edit it

  • @Action_Clips_CODM
    @Action_Clips_CODM หลายเดือนก่อน

    Do you think having the front end raised and the car being on a slight angle affects the fill up off the PTU fluid? Is it still the correct amount when it starts to drain out fill plug??

    • @NorCalOutdoor
      @NorCalOutdoor  หลายเดือนก่อน

      @Action_Clips_CODM yes, it won't be much different.

  • @TheGarageisFull
    @TheGarageisFull 2 หลายเดือนก่อน

    Old video but still the best one.

  • @TheGarageisFull
    @TheGarageisFull หลายเดือนก่อน

    Strangest thing. I was just driving home and I heard a very low level chirp in my rear differential. Watched your video just to double check. Changed the fluid in five minutes. Chirp went away

  • @MrRoyGuy
    @MrRoyGuy ปีที่แล้ว

    when you were unscrewing the differential bolts, it seems like you are doing it clockwise instead of counter-clockwise? is your camera inverted?

    • @NorCalOutdoor
      @NorCalOutdoor  ปีที่แล้ว +2

      You are correct. I used a front phone camera and forgot to edit it. Sorry for the confusion

  • @billstock3663
    @billstock3663 7 หลายเดือนก่อน

    great how to video. Do you use the same fluid for both transfer case and differential? would this apply to all Nissan vehicles regardless of year or model? Thanks

  • @ChrisHarris-to3ky
    @ChrisHarris-to3ky 3 ปีที่แล้ว +3

    This is a fantastic video... without the techno music. Very educational and informative, just get rid of the cheesy music.

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว

      Thanks for the advice

    • @charleshines8523
      @charleshines8523 2 ปีที่แล้ว

      There are so many videos with some sort of awful music. It isn't so bad when the volume is low but I would rather see and hear what is going on.

    • @ngzcaz
      @ngzcaz 7 หลายเดือนก่อน

      @@charleshines8523 thank God for the volume button on the computer...

  • @CR7R10DG19
    @CR7R10DG19 ปีที่แล้ว +1

    Any thoughts on letting valvoline do it for me?

    • @NorCalOutdoor
      @NorCalOutdoor  ปีที่แล้ว +1

      Yes, Im sure they can do it just fine.

  • @Action_Clips_CODM
    @Action_Clips_CODM 3 หลายเดือนก่อน

    What year a model is your rogue in this video?

    • @NorCalOutdoor
      @NorCalOutdoor  3 หลายเดือนก่อน +1

      @@Action_Clips_CODM 2017

  • @geoffe6144
    @geoffe6144 2 ปีที่แล้ว +1

    Do you fill up to fill port till it stops dripping completely or slow drip is good?

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      I was slow drip. Should be okay.

  • @stevespeed2000
    @stevespeed2000 ปีที่แล้ว

    Did you have your car on the ramps when filling up your transfer case. If so, will this cause any problems with the vehicle not being leveled cause the transfer case to be overfull or not full enough?

    • @NorCalOutdoor
      @NorCalOutdoor  ปีที่แล้ว

      No, thanks God, Im skinny enough to access under the car 🙂

  • @BillSW
    @BillSW 2 ปีที่แล้ว +2

    is this awd or fwd rogue?

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      Awd. I thought only sport model was fwd

  • @thechileacademy4800
    @thechileacademy4800 3 ปีที่แล้ว +3

    Thank you! So the differential fill and drain plugs both have a washer and the transfer case fill and drain have a washer, what is the 14mm aluminum washer for that you mentioned in the description? Thanks!

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว +1

      You are welcome. My bad. I bought 14mm aluminum washer before I bought oem washer. If you can't find oem trans case plug washers, you can use generic 14mm aluminum one from auto shop

    • @thechileacademy4800
      @thechileacademy4800 3 ปีที่แล้ว

      @@NorCalOutdoor thanks! I tried today but the box end of my socket wrench wouldn’t fit in the transfer case bolt . I was using 3/8”. So I need to buy a 10mm hex socket.

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว +1

      @@thechileacademy4800 you're welcome. Yes, for differential needs 10mm hex bit

    • @thechileacademy4800
      @thechileacademy4800 3 ปีที่แล้ว

      @@NorCalOutdoor do you know much much fluid you pumped int the differential? Currrently dong it now and man is it uncomfortable using a squeeze bottle and not a pump.

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว +1

      @@thechileacademy4800 Not much, I don't remember exacly, but I think it is less than 1/2 qrt. I filled it until it started to drip.

  • @SuperMarcoPolo7
    @SuperMarcoPolo7 ปีที่แล้ว

    Is this the same process for a 2017 Nissan Qashqai?

  • @TheGlenNA29
    @TheGlenNA29 ปีที่แล้ว

    Hi, Do I need to change Nissan 2019 FWD Transfer fluid & differential gear oil?

  • @venkataramg5480
    @venkataramg5480 ปีที่แล้ว

    I have 2019 model with 15k. I drive less but with frequent stops and shorter commutes. What is the recommended in terms of years for transmission fluid change? Also do we need to flush or just change

    • @bad1971nova
      @bad1971nova ปีที่แล้ว +1

      You have a lonnnnggg time. Usually around 100,000 miles you change the diff and transfer case oil.

    • @venkataramg5480
      @venkataramg5480 ปีที่แล้ว

      @@bad1971nova Thank you. But what I heard is to change transmission fluid for every 2 years or 30k for Nissan vehicles considering their transmission issues. So checking..

    • @bad1971nova
      @bad1971nova ปีที่แล้ว

      @@venkataramg5480 The diff and transfer case is a tad different from the transmission. I believe they use thicker fluid if I am not mistaken. And honestly I guess you can it's not really gonna hurt anything. I would personally wait till around 50- 60,000 miles. 100,000 is just like a general use case. It depends if you do city driving I would change it more often.

  • @garygagliostro9720
    @garygagliostro9720 2 ปีที่แล้ว

    Thanks for the video and info. Exactly as shown

  • @charleshines8523
    @charleshines8523 2 ปีที่แล้ว

    So far I did my rear one and it already feels a little bit different. Like it is a little bit smoother. I will eventually do the front one. Does the vehicle need to be level or can I put it on ramps? I would plan to leave it on the ramps over night so the exhaust will be cool. Really if it was up a bit higher it feels like you could almost crawl under and do it but I am not sure I want to be under there squeezing a bottle pump. I used Liqui Moly 80w90 GL5 with no limited slip in it. I made sure I would not need it and then made sure the oil didn't have it. I know that the limited slip is sold as an additive too but I don't need it.

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      Good to hear. I'm small, so I can do it without ramps. I believe using ramps will be okay and easier for you.

  • @pingliu7639
    @pingliu7639 2 ปีที่แล้ว

    which socket for the fill plug of transfer case? 3/8 ratchet? it is hex socket ,metric or sae? could you take a picture for the ratchet?

  • @garydavid9705
    @garydavid9705 2 ปีที่แล้ว

    Does an additive need to be added to differential? The dealer told me it does??

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      The additive will help, but I believe it is not required. I have never added an additive on any of oil/fluid changes.

    • @garydavid9705
      @garydavid9705 2 ปีที่แล้ว

      @@NorCalOutdoor I looked on Mitchell pro demand and there’s no mention of it. So I don’t think you need it either.

  • @jacklee5806
    @jacklee5806 2 ปีที่แล้ว

    I have tried to do it on my rogue but I can’t find the bolts.. I’m assuming it’s only done on AWD. I believe my car is FWD… any clue ?

    • @Erdie5
      @Erdie5 2 ปีที่แล้ว

      Yes, transfer case/differential is for providing power to the rear wheels on the AWD models. FWD you don't have to do this.

  • @bhrbek
    @bhrbek ปีที่แล้ว

    The plug on my rear diff was an SAE 3/8, not a 10MM. The 10MM was VERY loose. The 3/8 fit perfect. And when I changed the transfer case I hadn't watched any videos and have a TON of oil on the exhaust. It smells great when driving. hahaha...I cleaned up as much as I could but I'll be making many short drives to try to get that off before parking in the driveway again. Changing the CVT fluid was so stinking easy I think I'll be doing that quite often. I bought the car 48k miles ago and this was the first change for me. Not sure when anybody else changed it but it was DIRTY!

    • @NorCalOutdoor
      @NorCalOutdoor  ปีที่แล้ว

      That's odd. Usually, Japanese cars use metric size only and should fit better. Good to know.
      Yeah, the oil on exhaust makes strong smells. It will be gone after a while. It happened on my daughter Homda Accord. So, I know hot it smells 😀
      Thanks for sharing

    • @Action_Clips_CODM
      @Action_Clips_CODM 2 หลายเดือนก่อน

      Did you change all the filters when changing the cvt fluid? Don’t think it’s thaaaaat easy

    • @bhrbek
      @bhrbek 2 หลายเดือนก่อน

      @@Action_Clips_CODM I did change the CVT filter. That was a monster pain. Unfortunately, about 25k miles after I did all this work, the CVT failed at 160K miles. I'm hopeful it wasn't my work that made it fail. Happy the trans made it to 160k miles. I bought the vehicle at about 75k miles so pretty happy with the reliability despite what folks say about this CVT. Nothing leaking anywhere on it and runs like a top. I spent $5,500 on a reman transmission. Fingers crossed for 75K+ more miles out of this vehicle.

  • @Pingaheimer
    @Pingaheimer 11 หลายเดือนก่อน

    does it matter if the car isn't level?

    • @NorCalOutdoor
      @NorCalOutdoor  11 หลายเดือนก่อน

      Very good question. I just want to make sure I put the correct amount of fluids inside so it will lubricate all parts and will not break any seals when it is hot and the fluids expanded. Just for peace of my mind. I think a bit less or a bit more won't hurt anything.

  • @alonzozavala4416
    @alonzozavala4416 2 ปีที่แล้ว

    good video bro, do you recomend that oil brand for nissan rogue?

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว +1

      Yes, but if your car still having warranty, better to stick with OEM fluids.

  • @8khdrsoothingrelaxation276
    @8khdrsoothingrelaxation276 2 ปีที่แล้ว

    Thanks for the video!!! Is this video good for Nissan Rogue 2020 SV AWD? Do you know what the service interval is?

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      I think it should be good for 2020, but I haven't had a chance to check it. Gear oil normally around 20k-30k, max 50k or 2 years which ever came first.

  • @charleshines8523
    @charleshines8523 2 ปีที่แล้ว

    I changed the front on my 2017 Rogue Sport SV and it may be a different transfer case or just things laid out a little bit different. I was expecting it to be the same but it seems a little different. I am pleased that I did not have to cover the exhaust pipe on mine since the drain was not anywhere close to the exhaust. I have heard that in Japan my vehicle is known as the Qashqai. Also no, I did not drain any CVT fluid, it was a really small amount of oil much like what came out of yours. It also filled up really quick when pumping it in that front differential. Really the hardest part of the whole thing was just getting the plastic shield off the bottom of the vehicle. Of course the rear one was a lot simpler yet since all you really have to do is get under there with a pan to drain it into. Just remember on both of them to loosen the fill plug first so you are not stuck with empty differentials. If that does happen, get it towed to a shop it will be cheaper than the parts and labor to replace them!!

    • @crand20033
      @crand20033 ปีที่แล้ว

      How often do you have to do this? How many miles?

    • @jw7268
      @jw7268 7 หลายเดือนก่อน

      I don't understand, what does unplugging the fill plug first or last have to do with mistakes? Either way this is done during the drain phase no? Thanks in advance.

    • @gregsouls2666
      @gregsouls2666 6 หลายเดือนก่อน

      @@jw7268 If you take the drain plug out first and can't get the fill plug out, you won't be able to fill it back up, so that's why you take the fill plug out first.

  • @lmhnelson
    @lmhnelson 2 ปีที่แล้ว

    Good video to learn how to do it your self. We were told that you have to take it to dealer due to a lock on the transmission cap. But as you showed that is not true.

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      Thanks. No, it doesn't have a lock on the transmission cap.

  • @12bitizthewaytogo92
    @12bitizthewaytogo92 2 ปีที่แล้ว

    how often do you need to do this? im at 90K on my 2008 (OG owner) and have not done this, have not had any issues so far but assume I should do it now?

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว +1

      Every 30k. Some peoplle do it every 60k. Better to do it if you haven't never done that before.

    • @12bitizthewaytogo92
      @12bitizthewaytogo92 2 ปีที่แล้ว

      @@NorCalOutdoor thank you!

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      @@12bitizthewaytogo92 You're welcome

  • @BillSW
    @BillSW 2 ปีที่แล้ว

    did u do this when engine hit or cold?

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว +1

      Cold. Only tranny fluid on warm/hot.

  • @charleshines8523
    @charleshines8523 2 ปีที่แล้ว

    One thing I do is when I am done pumping the oil quickly stick the tube in an empty container because it is going to run out of there soon. You won't lose a lot, just the stuff in the tube but it is a little bit thick and that can make it a little bit hard to clean it up.

  • @ENTERTAINER4you
    @ENTERTAINER4you 2 ปีที่แล้ว

    How many quarts for diff and trans case??

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว +2

      It was a bit less than 1 quart each. So you will need about 2 quarts

  • @zhumango4728
    @zhumango4728 3 ปีที่แล้ว

    How much torque for these bolts?

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว

      I saw on Nissan forum online it says 26 ft/lbs

    • @zhumango4728
      @zhumango4728 3 ปีที่แล้ว

      @@NorCalOutdoor Thanks!

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว

      @@zhumango4728 You're welcome

  • @higherregion
    @higherregion 2 ปีที่แล้ว

    I notice with these nissan rogues, nissan doesn't fill them up too much.. Anytime i do a rogue that was never flushed its always less fluid amount compared to the new fluid amount.

    • @higherregion
      @higherregion 2 ปีที่แล้ว

      Its always 2.5x more going in than came out.

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว

      @@higherregion yes, it is always less than the new fluid, but I'm not sute, 2.5x less is normal. I notice just a bit less.

  • @NeutronX101
    @NeutronX101 2 ปีที่แล้ว

    What kind of pump i that?

    • @NorCalOutdoor
      @NorCalOutdoor  2 ปีที่แล้ว +1

      If you google "gear oil pump", you will find it

  • @YUFlysofast
    @YUFlysofast 3 ปีที่แล้ว

    I can’t get the rear diff plugs out helpppp

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว

      Tap it with your palm counter clockwise few times. The nut has manufactur liquid thread locker, like loctite. Once it breaks, it will turn easily. Good luck

    • @YUFlysofast
      @YUFlysofast 3 ปีที่แล้ว

      @@NorCalOutdoor I ended up like propping my self between the tires and stood up using the tires while laying on the ground. Much fun! Thanks for the video it was exactly what I was looking for. Also I enjoy your accent

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว

      @@YUFlysofast 😊. Thank you.

  • @RobertJackson-ky4ky
    @RobertJackson-ky4ky 2 ปีที่แล้ว

    Tech said my front Diff is bad. Do they mean the transfer case for the front? Or are there differentials in front and rear as well as a transfer case?

  • @mittp5584
    @mittp5584 3 ปีที่แล้ว +4

    #Important-Tip: You always want to open Fill plug first so 1) you know vehicle is leveled in a way you will fill exact amount that comes out, 2) not stuck in a situation where you drained the fluid and fill plug isnt opening 😎✌️

    • @NorCalOutdoor
      @NorCalOutdoor  3 ปีที่แล้ว

      Thanks so much for the tips 👍, but I have never opened the fill plug when changing oil or fluid so far. My reason is to get slow oil/fluid flows when I drained it. Easy to control if the fluid/oil got spilled.

    • @swaggerjacker1482
      @swaggerjacker1482 ปีที่แล้ว

      He is just saying you want to ALWAYS open the fill plug first to make sure you can put new oil back in. You can crack the fill plug and tighten it back hand tight if you want to.
      But if you drain the oil and then go to put new oil back in but you strip the fill plug or can’t get it off then you are screwed and can’t put new fluid back in