Thankfully the concept art isn't what the ship looks like. I made a video detailing the differences between the concept art and what actually showed up in the film.
Yeah some people do and some do not, it seems that the warp nacelle position on their pylons is just awful! that is why i altered this area on my model, also the Sean Hargreaves concept has put a lot of people off this ship, luckily they did alter it for the movie.
How did you build it from scratch? 3D printing? I've had plans to make this as well, unfortunately u started graduate school and I've essentially lost my life :-p
Great work on this as well. As it may not be exact to the movie ending, it is very very very well done. I like the look you've given it. Would have been even more impressive with the correct camera or setting sir. You're not giving your awesome work the justice it deservers with the poor video friend.
Ha Ha me too! i have read on various forums that they might not due to poor sales of the previous kits from like Revell into darkness, however i thought these into darkness kits sold very well, at the end of the day it comes down to how much money they think they will make then there is the license issues, apparently Paramount "CBS" charges a lot for the licence, we just have to keep believing they will produce a kit although it will not likely to happen for another few years yet once Star Trek 4 has been released!
There won't be another Star Trek film for a while... The JJ Verse (movies, at least) IS DEAD after Pine and Hemsworth walked away from negotiations for JJ-Trek 4.
You can't but it anywhere as a kit no one makes it! I built it from scratch so is the only one in the world, although i have another better one half finished just sitting there collecting dust because i have lost the drive/will to do anymore models.
@@ptaylor5014 No, just reshoot the finished model in wide mode. I'm sure you'd agree it would be more impressive. You did a great job. Better to show it off.
Now this is a fitting successor to the Kelvin Enterprise. Did you make the kit from a kitbash or is this a Revell/Polar Lights kit etc? Because this ship does the film ship some much needed justice.
It is scratch built but with some of the Revell parts used like the bridge and the deflector dish etc which were modified, i was going to fully do it 100% from scratch but time restraints on doing other clients models meant that i had to make some sacrifices and use kit parts from another kit.
Ha Ha maybe they should of, a few others have said almost the same thing you have said, perhaps i should contact Paramount and CBS with my work portfolio and what people have said about my models, who knows they might like them and take me on board! i can only dream lol.
I'd hope they'd see the Logic in such a streamlined vessel. Hell your design is like the modern version of Andrew Proberts' TMP refit from 1979. But hey I hope they check out this video and contact you for it. I'm sure lots of fellow Trek fans would agree that this should be the Enterprise - A...And not that God-awful wannabe Apple Spaceship mockery at the end of Beyond.
Hi PAUL TAYLOR, your Enterprise is...magnificent indeed. How much is it long? Do you...sell this model or it's unique? And how much would it costs? It's just fantastic, I have no words to describe it, good job. I hope you will answer me as soon as possible ;).
Hi sorry for late reply i have been busy, thank you very much for your kind appreciation, this model was a one off the only one in the world! it measured approx 22" long and i sold it for £1250 which come to think of it was a little cheap compared to the models that qmx sell for $6000!
The price is really cheaper instead of the Qmx one. So, you do model on commission or it was..just one? And the price would be the same? :D I know it was the only one but you don't make other model because it's a bit challenging or you can now? I don't know if I am clear. I know it was unique (so the price is logical) but on a comment you wrote that you "do the occasional commision" and this "occasional creation" would cost like the old one? Do not get me wrong, I'm just curious.
I still do commission builds and i am building another 1/500 enterprise for a client, then possibly a 1/350 polar lights Enterprise for another client, this model you are interested in is very hard to make because there is no kit available so i had to make it all myself, i can do another one but not yet as i am very busy.
Very beautiful ship. But it does not look like the "A" shown at the end of the movie. Warp Nacelles dont quite match, and the secondary hull was more pointed. At the same time, your design looks better than the one depicted at the end of the movie.
Thanks Horsing Naturally, yes it does not look exactly like the one in the movie, my intention was to build it close to it but add my own take on it, i hate the front of the warp nacelles on the movie one as they are stuck right on the end of the pylons and the shuttle bay is not seen either so i made my own up, lots of people have said the same thing about my model looking better than the one in the movie.
PAUL TAYLOR You are welcome. I wouldn't mind having a model such as the one you built. I of course being an old treckie, I still love TOS Enterprise the best and even her refit design. The JJ version seemed out of proportion with its over sized nacelles which were to close together. And the primary haul was too rounded at the edges. The other feature I disliked about the JJ version was with the neck joining both hulls as it was connected to far back to the secondary hull which put the deflector dish directly under the primary hull sensor dome. Man, am I a geek or what? LOL
No, A lot of people don't like the JJ-Prise. I think it's disproportionate and there have been a LOT of ugly Starship designs since Star Trek III (1984). JJ-Prise is possibly the most disproportionate Enterprise since they introduced the Excelsior-class in Star Trek III. The Refit (1979) was just about perfect proportionately and nobody's done a better design, IMHO. I do like the original TOS Enterprise (production version) and the Reliant quite a bit but have no use for the Enterprise's beyond the Enteprise-A (1986).
Hi Stuart originally i just intended on doing only one, but someone else has persuaded me to do another which i will be doing next month, i can do another but it wont be for some time as i have other builds to do.
You make a beautiful model then record it on a crappy phone camera in 'portrait' mode so you don't even fit the whole thing in shot. Were you trying to frustrate. This is almost unwatchable..
Hi i know it is not a great video as i did indeed use my phone, i also did not think at the time i was in portrait mode until i had uploaded it which took some considerable amount of time, during which i packaged the model up in its box ready for shipping as it was for sale, now sold to a new proud owner!
He stated in a blog that he modified the concept cause he didn't like it. The CG model used in the last minute of Beyond was just a final concept mode but still was going to be modified further had a 4th movie been releasedl
Fantastic successor to a fantastic ship
Thanks 👍👍
Much better than the concept art of the ship.
Thank you, I totally agree with you about the concept art.
Thankfully the concept art isn't what the ship looks like. I made a video detailing the differences between the concept art and what actually showed up in the film.
This ship is absolutely perfect. Both your model and the "real" thing.
Very impressive, it looks just the real one at the end of Star Trek Beyond.
Love the design of the new Enterprise-A from Beyond!
Yeah some people do and some do not, it seems that the warp nacelle position on their pylons is just awful! that is why i altered this area on my model, also the Sean Hargreaves concept has put a lot of people off this ship, luckily they did alter it for the movie.
Like your improvements on the model. Your model looks more like the screen accurate model not the concept art. Love the shuttle bay doors.
That would be because i spent a lot of time studying the stills on my movie by pausing it, there is hardly any pictures of it on the internet.
Check out the review I did on the Enterprise-A. th-cam.com/video/HRjeV3LAohc/w-d-xo.html
it's a one off build that I did. there is no kit anywhere in the world. I built it from scratch.
The decal as well?
How did you build it from scratch? 3D printing? I've had plans to make this as well, unfortunately u started graduate school and I've essentially lost my life :-p
If you made it from scratch hallelujah
This is amazing. The only in the world. Coming here from the year 2021..
I know it is kinda off topic but do anybody know a good place to stream newly released tv shows online ?
I kinda wish they had gone with jj-verse versions of the connie-refit nacelles.
I never liked the Enterprise A from beyond, but I like this a lot for some reason. Nice work!
That is an epic model!
Don’t film virtually with your phone people‼️.
Very Nice Job....
Thanks much appreciated
Great work on this as well. As it may not be exact to the movie ending, it is very very very well done. I like the look you've given it.
Would have been even more impressive with the correct camera or setting sir. You're not giving your awesome work the justice it deservers with the poor video friend.
Love eaglemoss star trek beyond enterprise A best starship ever
Hi Eric I did not know that eaglemoss have made the beyond enterprise-A, were did you find that because i can't see it anywhere?
If they do not sell a model like this when the next movie comes out I will be thoroughly disappointed.
Ha Ha me too! i have read on various forums that they might not due to poor sales of the previous kits from like Revell into darkness, however i thought these into darkness kits sold very well, at the end of the day it comes down to how much money they think they will make then there is the license issues, apparently Paramount "CBS" charges a lot for the licence, we just have to keep believing they will produce a kit although it will not likely to happen for another few years yet once Star Trek 4 has been released!
There won't be another Star Trek film for a while...
The JJ Verse (movies, at least) IS DEAD after Pine and Hemsworth walked away from negotiations for JJ-Trek 4.
where did you get your nacelle motors?
Where can I buy that kit
You can't but it anywhere as a kit no one makes it! I built it from scratch so is the only one in the world, although i have another better one half finished just sitting there collecting dust because i have lost the drive/will to do anymore models.
@@ptaylor5014 that is a cool model
Oh God so Awesome
thanks happy you like it
Excellent work. Would you be able to reshoot at a wider angle so we can get better views, please? Again, this is excellent work!
Agreed, the portrait mode of this video doesn't do justice this beautiful model..
Maybe i should un-box it and re do the video
@@ptaylor5014 No, just reshoot the finished model in wide mode. I'm sure you'd agree it would be more impressive. You did a great job. Better to show it off.
To Quote Scotty in Star Trek Generations "Damn fine ship if you ask me."
Awsome
where is the websote to get one?
where did you get that model kit ?
I hope you can use your talent for great things, really.
To bad we will never see her in another star trek movie
Yeah agree, would of been nice to see it again in a new movie.
Hate the ship...JJ has no design sense...but you did a great job building that ship! Nice showcase of modeling skills! Thanks for sharing!
Thanks
Now this is a fitting successor to the Kelvin Enterprise. Did you make the kit from a kitbash or is this a Revell/Polar Lights kit etc? Because this ship does the film ship some much needed justice.
It is scratch built but with some of the Revell parts used like the bridge and the deflector dish etc which were modified, i was going to fully do it 100% from scratch but time restraints on doing other clients models meant that i had to make some sacrifices and use kit parts from another kit.
Epic Job done. Hell they should've consulted you to design the movie ship...or at least tweak it where it needed it
Ha Ha maybe they should of, a few others have said almost the same thing you have said, perhaps i should contact Paramount and CBS with my work portfolio and what people have said about my models, who knows they might like them and take me on board! i can only dream lol.
I'd hope they'd see the Logic in such a streamlined vessel. Hell your design is like the modern version of Andrew Proberts' TMP refit from 1979. But hey I hope they check out this video and contact you for it. I'm sure lots of fellow Trek fans would agree that this should be the Enterprise - A...And not that God-awful wannabe Apple Spaceship mockery at the end of Beyond.
Hi PAUL TAYLOR, your Enterprise is...magnificent indeed. How much is it long? Do you...sell this model or it's unique? And how much would it costs? It's just fantastic, I have no words to describe it, good job. I hope you will answer me as soon as possible ;).
Hi sorry for late reply i have been busy, thank you very much for your kind appreciation, this model was a one off the only one in the world! it measured approx 22" long and i sold it for £1250 which come to think of it was a little cheap compared to the models that qmx sell for $6000!
The price is really cheaper instead of the Qmx one. So, you do model on commission or it was..just one? And the price would be the same? :D I know it was the only one but you don't make other model because it's a bit challenging or you can now? I don't know if I am clear. I know it was unique (so the price is logical) but on a comment you wrote that you "do the occasional commision" and this "occasional creation" would cost like the old one? Do not get me wrong, I'm just curious.
I still do commission builds and i am building another 1/500 enterprise for a client, then possibly a 1/350 polar lights Enterprise for another client, this model you are interested in is very hard to make because there is no kit available so i had to make it all myself, i can do another one but not yet as i am very busy.
Ah ok. At the same price?
What star trek models you do? And how much do they cost?
just to the right of the search button is the word Advanced! click here then enter the number
still can't find it mate
It has finished on eBay now.
Very beautiful ship. But it does not look like the "A" shown at the end of the movie. Warp Nacelles dont quite match, and the secondary hull was more pointed. At the same time, your design looks better than the one depicted at the end of the movie.
Thanks Horsing Naturally, yes it does not look exactly like the one in the movie, my intention was to build it close to it but add my own take on it, i hate the front of the warp nacelles on the movie one as they are stuck right on the end of the pylons and the shuttle bay is not seen either so i made my own up, lots of people have said the same thing about my model looking better than the one in the movie.
PAUL TAYLOR You are welcome. I wouldn't mind having a model such as the one you built. I of course being an old treckie, I still love TOS Enterprise the best and even her refit design. The JJ version seemed out of proportion with its over sized nacelles which were to close together. And the primary haul was too rounded at the edges. The other feature I disliked about the JJ version was with the neck joining both hulls as it was connected to far back to the secondary hull which put the deflector dish directly under the primary hull sensor dome. Man, am I a geek or what? LOL
No,
A lot of people don't like the JJ-Prise. I think it's disproportionate and there have been a LOT of ugly Starship designs since Star Trek III (1984). JJ-Prise is possibly the most disproportionate Enterprise since they introduced the Excelsior-class in Star Trek III.
The Refit (1979) was just about perfect proportionately and nobody's done a better design, IMHO. I do like the original TOS Enterprise (production version) and the Reliant quite a bit but have no use for the Enterprise's beyond the Enteprise-A (1986).
how did you do the enterprise
I built it from scratch using some parts from an old kit, i am building another one that will be more accurate to the ship in the film :)
저거 어디서 샀어요?ㅎㅎ
Can people purchase models you have built?
Yes i do the occasional commission build.
@@ptaylor5014 Hello big fan of your excellent work, how can I commision one of your builds of the Enterprise A?
I like the star ship
eBay ad link?
Hi yes here it is, eBay item number:272691320186
Won't work, says invalid :/ Could you possibly just copy and paste the URL?
I dont suppose you're making any more for sale?
Hi Stuart originally i just intended on doing only one, but someone else has persuaded me to do another which i will be doing next month, i can do another but it wont be for some time as i have other builds to do.
How can I contact you (in any case)?
it's all boxed up ready for shipment as it is for sale sorry
You make a beautiful model then record it on a crappy phone camera in 'portrait' mode so you don't even fit the whole thing in shot. Were you trying to frustrate. This is almost unwatchable..
Hi i know it is not a great video as i did indeed use my phone, i also did not think at the time i was in portrait mode until i had uploaded it which took some considerable amount of time, during which i packaged the model up in its box ready for shipping as it was for sale, now sold to a new proud owner!
PAUL TAYLOR weren’t you the one who did the Aztec paint job on the refit Enterprise from “Star Trek: TMP” back in 1979?
Not quite accurate now that there's actual CG images of what was really used in the film. Still a nice looking model though.
He stated in a blog that he modified the concept cause he didn't like it. The CG model used in the last minute of Beyond was just a final concept mode but still was going to be modified further had a 4th movie been releasedl
stop taking videos in potrait mode