I was glad that I wasn’t the only one who noticed the checking of the oil with the engine running . I did this once when I was 12 and it showed full ; but it had less than a quart of oil in it and the engin locked down in about three hours of plowing. ; when my dad got through with me , my ass wouldn’t hold shucks
Heck of a blade on that machine. Not like the normal US machine, and I like the sawdust capture device that puts it mostly in one pile rather than across the length of the cut.
Great demonstration of a very efficient machine...but why the irritating bump-bump-bumpity bump music. The sounds of the motor running and saw cutting would add much to this presentation.
Why the music? I want to hear the saw blade. TH-cam should have an option to deselect any background music, if the poster submitted a container with two audio channels, one being an annoying background music that has nothing to do with the equipment being demonstrated.
Gary Bercume you full of shit! It’s a little Kubota engine. No you do not want to check the engine oil when it’s running. It makes for a very inaccurate reading.
Do you sell internationally? Where is your operation? I'm in the USA and the "Montana" in your product names makes me think USA. I'm in Washington State, USA! Nice looking machine.
Mr: Stan Rogers,this Units are manufacture in Belgium,however there are many used units for sale right here in USA.From what I gather in very good conditions but not so good prices being that they are used.Hope this info is of any help.KUDOS from South Florida.
Why is it that almost every mill demo video has that wondrously straight log to cut? All the logs I see at real mills are not even close to these telephone pole demo loads. 😏🤔
You should check out Norwood's new ad... Then remake this one... I'm sure there are excellent features going on here that are not clearly shown... I like the sawdust hopper though...
Since this is basically a commercial (and not a bad thing), why not use this time to do a voice-over and "sell" your machine? Tell us the features, benefits etc. You've got 6 minutes to convince me to buy, or at least find your website (which you didn't even list). Or not. Just waste everyone's time. And then film Grandpa as he wonders off to the bathroom for his afternoon dump...
Music is so over-rated in tool and equipment videos it has gotten to the point of unbearable. The sound of the saw is what 99.9 % of the people that will actually watch this video wants.
Checking the engine oil level with the engine running. Way to get an accurate reading.... smart!
Hallo..Ich bin J.B..aus Bad Salzungen wir haben schon 12 Jahre unser Serra Blockbandsäge und sind sehr zufrieden. Der Service ist auch sehr gut 👍
Combien ça coûte..?
Merci
I admire people who can do something different and simply like the one who invented this saw! Bravo!
I was glad that I wasn’t the only one who noticed the checking of the oil with the engine running . I did this once when I was 12 and it showed full ; but it had less than a quart of oil in it and the engin locked down in about three hours of plowing. ; when my dad got through with me , my ass wouldn’t hold shucks
Де.ви.находитись
good job, The big tree is really pleasing to the eye
looks like a fine mill. what's does it cost?
Great video. Have you ever used a green line laser module as an alignment tool ?
Heck of a blade on that machine. Not like the normal US machine, and I like the sawdust capture device that puts it mostly in one pile rather than across the length of the cut.
Whair do I get this saw mill it looks to be the best one I have seen as far as band saws
Hi, please send a mail with your contact to office@serra-sawmills.com
Great demonstration of a very efficient machine...but why the irritating bump-bump-bumpity bump music. The sounds of the motor running and saw cutting would add much to this presentation.
Where do we go to get a brochure on your portable sawmills
Wishing you good health, good job
Magnifique présentation
Je suis intéressé
Comment je peux vous contacter...
Combien ça coûte
Merci
info@serra.de
It is nice that it is a bridge machine.
Yes was it running ? Strange
The music got me.
Just a bigger Wood Mizer! Must be competition is getting fierce!
Do you can sell 6 or 7 meter long sawmill?
Price please
The new Montana MD90: Setting the standard for innovation and performance.
I can't tell that the debarker is doing anything at all at 1:48???
Хелло сколько стоит эта машина? И как вы работаете?
Máquina fantastica é um sonho ter ima dessas parabéns.
Great set up!
Как машина в целом доход приносит?
this machine is a beast
Beeindruckendes Sägewerk ❤️❤️❤️
Why the music? I want to hear the saw blade. TH-cam should have an option to deselect any background music, if the poster submitted a container with two audio channels, one being an annoying background music that has nothing to do with the equipment being demonstrated.
Como faço para comprar uma máquina dessa e qual é o valor
Wow! that is some machine.But do not check the oil when the Engine is running.
Don Lunn yes you can check the engine oil while running, depending on the make of the engine
Gary Bercume you full of shit! It’s a little Kubota engine. No you do not want to check the engine oil when it’s running. It makes for a very inaccurate reading.
Hola una consulta ese aserradero funciona sin electricidad?
Yes, this sawmill can also be powered by a diesel engine.
What do you do with all the saw dust?
what is price this machine?
That is some serious mashing
Qual a grossura da tora que pode passar ela com Disel ou gasolina ou elétrica
It doesn't look like it has roller type blade guides ?
can any body tell what kind of blade guides this mill uses ?
I lost faith in these guys in the first 10 seconds when they checked the oil on a running engine.
johnnybarbar ujiooo
johnnybarbar i
it probably has a dip stick with a run level mark and stop level mark
The first thing came to my mind was that, checking oil while the engine is running?
It looks like the hydraulic oil next to the valve body, not engine oil.
Were you checking the oil with the engine running????????????
read the friggin replys
Vraiment cool
Need chain or sprocket?
Do you sell internationally? Where is your operation? I'm in the USA and the "Montana" in your product names makes me think USA. I'm in Washington State, USA! Nice looking machine.
According to their website the only distributor in North America is in Ontario, Canada
Mr: Stan Rogers,this Units are manufacture in Belgium,however there are many used units for sale right here in USA.From what I gather in very good conditions but not so good prices being that they are used.Hope this info is of any help.KUDOS from South Florida.
Gostei dessa serraria M D 90
Por favor contacte Roberto Lautenschlager: roberto.lautenschlager@serra.de
Combien cela peut il me coûter ?
Is that in slow motion?
Hatte auch mal so ein Teil.......
Träume heute noch davon 🥵
2:17 why do you cut the same plank again ?
he didn't that is the debark line you're seeing.
Bonjour
Je suis au Cameroun et je suis très intéressé par votre machine en démo. Combien ça coûte et comment commander?
Le partenaire de distribution dont vous dépendez :
ETS NZOPPA
Bang Ekomba Jo Stephan
17120 Douala, Kamerun
+24106310126
stephbekale1@gmail.com
Sorry guy's there is some engines you can check with it running there is two area's on the dip stick Cat equipment can be checked while running.
I like the chute dump for the sawdust
No sawdust hopper....?
that's a small diesel engine, do you know the make and H.P on it?
Since these guys don't seem to reply, most smaller mills use yanmars or mitsubishi's
I know the color from Volvo Penta Marine Engines. Just guessing!
The MD90 uses a 1.5 L 33 kw/ 44hp Kubota turbo diesel inline 4 cyl or it has two electric options.
Hermann Straub owttikbv
Bonjour je veux acheter cette machine
Mesin ini bagus, harganya berapa?
Awesome
Lol did he just check the oil with the engine running....sorry man but thats definatly a no no espically if your selling something mechanical !!!
Comment faire pour payer cette machnine
Now that is a freekin mill
Красиво пилит!
i want this machine.
what's street do you know To buy it ?
Defbeuzz sen wall street 🤣🤣
Y'a t'il quelqu'un peux m'aider...
Je besoin d'une machine comment e puex contacter le fournisseur 😢
Merci
It needs technical comments.
el.ranchero
like bueno
para construccion
Máy ngon wa hiện đại 👍🏻
It’s portable, but if you think this is cool.
Check out the Hurdle Magnum LT
Impresionante!
Impressive
Not the eighties man,we no longer need background music.
TIENE UNP.ALA.VENTA.?
Music is OBNOXIOUS! Checking "oil" while machine is running doesn't seem safe? What about the blade lube reservoir?
Now that's a saw milling machine!
That is the MOST annoying music.
Foreign made, foreign music
El precio y si no tienen representante en Bolivia
You check Engine Oil with the Engine shut off!
Yep who checks engine oil when running maybe it had a quartin it lol
Why is it that almost every mill demo video has that wondrously straight log to cut? All the logs I see at real mills are not even close to these telephone pole demo loads. 😏🤔
Não!
O cara confere o óleo com o motor funcionando, é o mesmo que medir pressão e temperatura correndo
Заебись он на работающем двигателе уровень масла проверяет !!! ))))))))
When the sawdust hopper empty is silly to drop it onto the ground you could be putting it in bags
That's what I was thinking too. Why dump it on the ground?
Cuanto sale uno de esos en pesos chilenos
You should check out Norwood's new ad... Then remake this one... I'm sure there are excellent features going on here that are not clearly shown... I like the sawdust hopper though...
Just a shame that the discharge is not into a container.
But that's an easy fix... A front loader's bucket... An auger chute up into a dump bed... Use our imagination...
The Norwood is not a production mill it for dack yard Or hobby is sawmill but not a production saw your blades are too small
Maimi 80's gay club just called. They want their tunes back...
What’s with the stupid music? Let us hear the saw and the men talking.
I would much prefer narration over that redundant music.
That's a nice mill, but a video WITHOUT the stupid music would be way better and edit out the guy checking the oil with the engine running.
This video would of been lots better without the music.
That thing didn't look very ridged at all go with timber king
how about getting rid of that horrible noise , i mean music
Скоко стоит такая лесопилка.
Миша Воробей
Сколько стоит
How Mach
stop the GODAWFUL NOISE IN THE BACKGROUND.
We are watching a saw mill not listening to mind numbing GARBAGE.
Since this is basically a commercial (and not a bad thing), why not use this time to do a voice-over and "sell" your machine? Tell us the features, benefits etc. You've got 6 minutes to convince me to buy, or at least find your website (which you didn't even list).
Or not. Just waste everyone's time. And then film Grandpa as he wonders off to the bathroom for his afternoon dump...
Watched the first 50 seconds. Screw the noise. Stopped watching.
Music is so over-rated in tool and equipment videos it has gotten to the point of unbearable. The sound of the saw is what 99.9 % of the people that will actually watch this video wants.
Сколько стоит на Москве
I just can't stand moron music.
T David Graham 汴
Nope, sorry.....way to many dollars for this thing.
MP ka hun uski price MP mein
🤙
TOM PIPPS . FOAM - BATON ROUGE LOUISIANA USA . HI HELLO .