My father just took me to the garage and showed me his Gitane track bicycle from 1980's. Extremely light, but in great need for a full restoration. "If you restore it, it's yours", he said... Your video proved me that a full restoration is possible. So I went up to my dad and told him "challenge accepted"... :-)
@@cristianturcios6667 @JannisAdmek @CycleFields Hi all. The restoration project went very well. Turns out this bicycle is a high-end Gitane Vuelta equipped with Shimano 600. I disassembled, washed and derusted everything I could, then bought a few new parts : handlebar tape, brake cables, saddle, tires of course... Apart from a few chips in the paint and the rear brake which works moderately well, I'm very happy with the result. All of it for a budget of 90€. Definitely worth it.
Another masterpiece. I was afraid of how the painted stem and handlebars would come out, but the result was sweet. I was surprised how the brown tape complimented the bike and made the colors pop. Awesome.👍🏼👍🏼
Hola soy de Chile ,estoy restaurando una bicicleta con similares características es de marca lugano ,en realidad es igual en sus componentes, me gustaría saber si alguien sabrá de que año será este modelo ,saludos
Bravo, un restauro ben fatto, economico e che ha salvaguardato parecchi componenti originali, temevo che la forcella facesse una brutta fine come accade in altri video dove il telaio viene conservato ma buttato tutto il resto.
Finally a good paint work, and some stickers. Using primer and multiple colors, and a glossy varnish, the result is beautifull. Congrats, super nice job!
formidable restauration le vélo est superbe quand ont le voi au début et le résultat final une véritable merveille. Vraiment bravo vous ête incroyable.
🎉🎉🎉 fantastic. The only video I found that actually SHOWED me, start to finish, HOW to restore the bike, instead of just TALKING about it!😅 Very very good,!!!
I brought a Raleigh Record off eBay for £40 and did the same as you. Condition was bad but not as bad as yours. I worked at a place that did powder coating and used a nice blue colour. Turned out amazing. Thanks for sharing.
I was surprised you were able to get nearly all of the rusted parts and fasteners loose! I would have expected it to be almost a lost cause with all the corrosion. I've recovered bikes that didn't look quite as bad as yours, which ended up with many parts permanently seized into place.
That's a far cry from the way you found it. Very nice work. Just one suggestion. Get some 7/16 all thread and some fender washers, nuts, and press in the cups. I would have dinged them for sure with a mallet...even a plastic mallet...lol
Man I NEED to find someone who has the time to do an old Schwinn road bike for me. It was my mom's and has her last license plate on it from 1974 but is unfortunately in rough shape after years outside but I don't think it's much worse then this one to start 👍 Makes me very happy to see people take the time and have the skill to make these old bikes better than new 👌👍👍👍
The cable router he installed a ove the Bottom Bracket would be a braze on, on a more expensive frame. It's the lack of busy on the frame which makes the difference. This man knows the trade!
Genial trabajo.que bueno que la caja de motor venia con hilos R/L.para instalar el motor sellado.a veces las cajs de motor de las bicicletas antiguas vienen con hilos R/R y es un lio instalar el motor sellado.👏👏👏👌👌
Vous vidéo me surprend a chaque fois vous redonnez une seconde vie a chaque vélo avec passion et une telle amour si en vous croise en direz pas que ce vélo et etait mort et fini merci
Hola amigo, gran video. Felicidades por el resultado. ¿Cómo haces para que al aplicar el barniz, no se te levante la pintura existente? Me ha pasado en varias bicis y lo odio. Muchas gracias
Una ves que pelaste la bici al metal- pasale una lija 800 al agua-completamente-! Despues le pones un cebador contra el zarro/oxido - y justo q- terminas el cebador- dale tu color preferido y ahi lo tenes. 😊
Wah akhirnya sepeda pesanan ane.. mantap om..
Sama2 bang.. sukses buat channelnya..
budget brp om ada contak nya kah
Dibawah 3 juta jadi om.
08975033405
@@bikebaiktv9220 q@
Ñpñ
Á
@@bikebaiktv9220 ññ)
Ñ
p
P
pññ
pññññp
Ññññññp
Ppp0000000
Beautiful restoration. Saving the world, one bike at time. The bike is good for another 50 years!
il faut comprendre que un vélo a besoin de piste cyclables donc de goudron, donc n'est pas mieux qu'un âne, qu'un cheval, ou qu'un chameau
My father just took me to the garage and showed me his Gitane track bicycle from 1980's. Extremely light, but in great need for a full restoration.
"If you restore it, it's yours", he said... Your video proved me that a full restoration is possible. So I went up to my dad and told him "challenge accepted"... :-)
Wow,....👍👍
I hope the bike will last forever
Any updates on your restoration?
Please update us😩
@@cristianturcios6667 @JannisAdmek @CycleFields Hi all. The restoration project went very well. Turns out this bicycle is a high-end Gitane Vuelta equipped with Shimano 600. I disassembled, washed and derusted everything I could, then bought a few new parts : handlebar tape, brake cables, saddle, tires of course... Apart from a few chips in the paint and the rear brake which works moderately well, I'm very happy with the result. All of it for a budget of 90€. Definitely worth it.
@@alg2990 well done
This is a very nice mix of new parts and repaired old parts. I would have liked to see the rims repaired with new spokes and polished up.
Ooooh, I got very excited seeing the cotter pins come out. They were that difficult 47 years ago when they were on my new bike as well 😝.
Another masterpiece. I was afraid of how the painted stem and handlebars would come out, but the result was sweet. I was surprised how the brown tape complimented the bike and made the colors pop. Awesome.👍🏼👍🏼
The will rust back through quick enough
Hola soy de Chile ,estoy restaurando una bicicleta con similares características es de marca lugano ,en realidad es igual en sus componentes, me gustaría saber si alguien sabrá de que año será este modelo ,saludos
I wanted tan! 😂
Great restoration and a most enjoyable video to watch! Working on bikes is so, so rewarding.
Thanks
Thank you very much for bringing this bike back to life. It looks better than new!
Congratulations!!
Thanks brother 👍👍
This is a very nice mix of new parts and repaired old parts
Great video! It inspired me to restore my first bike.
Ride safe always.
Ride 'n Shine
🚴
Sick build man really nice build plan on doing a similar thing myself with a vintage peugeout from the 80s
this, ladies and gentlemen, is a masterpiece
Thanks Sist
Bravo, un restauro ben fatto, economico e che ha salvaguardato parecchi componenti originali, temevo che la forcella facesse una brutta fine come accade in altri video dove il telaio viene conservato ma buttato tutto il resto.
Beautiful build well done ✅
Nice bike restora my friend looking forward more restoration video
Okay
Finally a good paint work, and some stickers. Using primer and multiple colors, and a glossy varnish, the result is beautifull. Congrats, super nice job!
totally transformed !!! great bike !!!
Excelente restauración varón, le pusistes mucha pasión a ese quedó una belleza de bicicleta.
Love the video. Inspiring me to restore an old trek!
This bike before looked wasted thru a time capsule of rust...😮😮😮, and now its a mint old school master piece. ‘Bravo Maestro’ 🎉
Thanks so much carlos
formidable restauration le vélo est superbe quand ont le voi au début et le résultat final une véritable merveille. Vraiment bravo vous ête incroyable.
seneng liatnya. simple yet beautiful. sukses cenelnya gaesss
Trimakasih Mas 🙏
Amazing transformation...
Thanks for showing how to effect it.
Thank you! Cheers!👍💯💯💯
filmography, lights, sound, edit timing incredible..
Thanks 😁🙏💯💯
Thank you for another great video.
Маэстро я восхищён....сам езжу и привожу в порядок... только на ретро евро байках....но ваша работа великолепна...
You are an artist! Simply gorgeous! 😮
Bro more than restored
Changes the bikes life
👍💯💯
Great job.
Nice bike.
great job, I like the brown bar tape too. maybe I would not have taken the carbon fiber bottle cage myself.
Amazing work.
amazing job giving life to an old bike
Thankss
Very Nice Restauration!!!!
🎉🎉🎉 fantastic. The only video I found that actually SHOWED me, start to finish, HOW to restore the bike, instead of just TALKING about it!😅 Very very good,!!!
Exactly! Some comments would been good, either printed or spoken, such as naming the parts, etc.
wow i just finished a raleigh grand prix. yours was alot more work. looks fantastic. great job & sweet ride
Is it a grand prix too? Looks like it but not sure.
Thank you for this! I struggle with the shifters and don’t have the confidence to do it myself!
Thanks 👍👍
I brought a Raleigh Record off eBay for £40 and did the same as you. Condition was bad but not as bad as yours. I worked at a place that did powder coating and used a nice blue colour. Turned out amazing. Thanks for sharing.
Awesome job mike 👍👍👍
Admirable como lo has hecho, quedó bellísima!!👏👏👏 Ya me suscribí.
Gracias 👍💯💯
wow! Beautiful work!!!
Thanks 🤩👍👍👍👍
Hey great vid! can you share what products you used for the paint and where to get them?
❤❤❤❤❤ESPECTACULAR.....MASTER....👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾🌹🌹🌹🌹🌹
Thanks 🤩👍👍👍
What a great job!
The bike reminds me of my 1980 Peugeot 10 speed road bike! Unfortunately that got stolen near a Metro station around 1992
Stunning!!! well done !!!
Thank you! Cheers!
Bravissimo, ottimo lavoro, davvero un bel risultato
Thanks 🙏💯
Wow! Such dedication and a fine result.
Thanks 😁👍💯💯💯💯
Fantastic job
Impressionat job!!
5:56 excellent work. Really satisfying to see you do this. I feel like I learned a lot just watching you.
Thanks friends 😊🙏👍👍
I was surprised you were able to get nearly all of the rusted parts and fasteners loose! I would have expected it to be almost a lost cause with all the corrosion. I've recovered bikes that didn't look quite as bad as yours, which ended up with many parts permanently seized into place.
mantappp om resto nya, suhuuu
Suwun mas
Yerba nice 👌 looks awesome 👍
well done... i think i'm going to buy a simple grinder like you have
Beautiful creation. Good work
Beautiful job brother and beautiful bike!!!
Well done, nice job.
That was my old bike. I want it back now
Very nice work.
Tidak mudah tentunya merestorasi sepeda yg udah bener2 karatan parah gitu jadi sepeda layak pake.. keren om..
Salam dari wonogiri🙏
Terimakasih mas
Awesome job!!
That's a far cry from the way you found it. Very nice work. Just one suggestion. Get some 7/16 all thread and some fender washers, nuts, and press in the cups. I would have dinged them for sure with a mallet...even a plastic mallet...lol
Thanks 😁👍👍👍💯💯
Man I NEED to find someone who has the time to do an old Schwinn road bike for me. It was my mom's and has her last license plate on it from 1974 but is unfortunately in rough shape after years outside but I don't think it's much worse then this one to start 👍 Makes me very happy to see people take the time and have the skill to make these old bikes better than new 👌👍👍👍
I hope you can find someone close by, who can help you
@@CycleFields thank you! I can't wait to see it looking as good as this one someday!
Bike should never be stored outside!!!!!!!
Very nice, reminds me of the old Raleigh Banana.
Buen video amigo buena restauración .
Thanks Amigo 💯💯💯
❤Goog job, we share hobby, beautiful 😊
Awesome job
Amazing job, congrats
Thanks 🤩👍👍💯💯💯
Great work!!!! I salute you, bro.
que padre¡¡ disculpa ¿que tipo de pintura le aplicaste y donde la consigo ?
Any suggestions for people that don't have a stand for frame? 6 minutes in...ty! Great video
Great job mate, it truly looked beyond saving at the beginning but beautiful by the end.
que buen trabajo amigo si señor
Wow. What a beauty.
Super clean!
Thanks You
Awesome work.
Thanks 😁👍💯💯💯
Integrated seat bolt clamp. Nice.
Great job 👍
The cable router he installed a ove the Bottom Bracket would be a braze on, on a more expensive frame. It's the lack of busy on the frame which makes the difference. This man knows the trade!
Marvelous job! I'm not a fan of the oldies, but this looks awesome now! Man!
Thanks Bro
Quedo chida pero la neta las caidas tambien son memorables y las roturas tambien🤫
Genial trabajo.que bueno que la caja de motor venia con hilos R/L.para instalar el motor sellado.a veces las cajs de motor de las bicicletas antiguas vienen con hilos R/R y es un lio instalar el motor sellado.👏👏👏👌👌
😁👍👍👍👍
Un trabajo excelente felicitaciones al restaurador mecánico .muy
hábil y paciente
Great rebuild, I think the handle bar tape paint would have looked better yellow to match the decals. I enjoy you work
Great job, the end result was beautiful !
great stuff - i have a similar 1979 Raliegh with Mavic GP4 WHEELS
Awsome 🤩🤩
the bike look good nice job
Thanks 👍👍👍
Well done!
Excelente trabajo, los colores son los originales?
Ficou linda demais!!!! 🇧🇷
Vous vidéo me surprend a chaque fois vous redonnez une seconde vie a chaque vélo avec passion et une telle amour si en vous croise en direz pas que ce vélo et etait mort et fini merci
WOW ! Beautiful restauration! :)
Thanks
Bro just took the rusty bolts off like it was nothing it takes me forever just to take a normal one off.
-Talent
Beautiful!
Thanks
Great work!
Thanks You
Great work! What kind of paint did you use?
Wow very impressive 🔥
Thanks 👍👍👍
Hola amigo, gran video. Felicidades por el resultado. ¿Cómo haces para que al aplicar el barniz, no se te levante la pintura existente? Me ha pasado en varias bicis y lo odio. Muchas gracias
Una ves que pelaste la bici al metal- pasale una lija 800 al agua-completamente-! Despues le pones un cebador contra el zarro/oxido - y justo q- terminas el cebador- dale tu color preferido y ahi lo tenes. 😊
Wow this is very impressive
Amazing job in resurrecting the bike!👍
Hola! Un gusto!
Cómo tengo que pedir el tipo de lija para sacar la pintura vieja?
Good job!Now it looks like red Ferrari.