Alfa Romeo 4C Aftermarket Exhaust Install Guide. Very Straightforward! Details in Description.
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- sportcompactwa...
14 T-30 bolts for bottom frame bolts, Watch • The Proper Way To Chan... on how to remove bottom frame
4mm Allen wrench for back plate side screws
3 #2 Phillips head screws for back plate, top
2 T-30 Bolts, top
15mm socket for all exhaust clamps
12mm socket for 3 cat nuts
22mm wrench for O2 sensor
Some liquid soap to loosen up exhaust hangers
Small pry bar for exhaust hangers
Wrenches- www.amazon.com...
Instagram - / todayiworkon
Contact - TodayIWorkOn@gmail.com - บันเทิง
Thanks for posting this. I had to change the centre section on my 4C exhaust today and it was really helpful to follow what you did. I had the car on ramps and was working on my back as I don't have a lift, so it was great to know the screw and nut sizes - I got all the tools ready before I got under the car.
Great vid, looking forward to the exhaust sound comparison
Awesome car. All Alfas are.
Hello, I’m in extremely urgent need of help, how do I install a downpipe? I cannot find a video and I have absolutely no idea what I am doing.
I do know it's tight where the downpipe is. It can't be that difficult once you remove the exhaust. I wish I can be more help, but I never removed the downpipe...
Great Video and So helpful, I purchased and almost new 2020 Spider with the Magnaflow already installed, it does sound good I admit but after some miles it got super annoying, not to mention the check engine light. I used this video to reinstall the stock exhaust, does not sound as good but I can rip down the highway without earplugs and no check engine light, thanks again for the great detail.
Curious what the code was for the CEL. Please let me know.
@@TodayIWorkOn Im sorry I do not know, i took it to the Alfa dealer each time, they cleared the code and told me that the exhaust would cause that. So far the stock exhaust has not caused any check engine lights and it would have by now. Since it is still under warranty i did not want to do any changes that could cause any issues so Im leaving it stock, it is just much more pleasant to drive for long periods of time without the continuous drowning, thanks again!!
Nice job...did you ever find the torque specs for the mid pipe to cat? Thanks
I can't find anything on this car other than this, billswebspace.com/4C.html?fbclid=IwAR38bHeb_20bW3kGR277rh0IXP9syTDGZQbXckj7BmsHA4XTp2rab1vbx14
It's like an encyclopedia for 4C's. The biggest issue I have with owning an Alfa is the way the company does not share anything to their customers. Everything needs to go though Alfa, which stinks.
@@TodayIWorkOn I torqued the three nuts to twenty
.
We will see!
Good job. I'm a big time car guy too. I have a C7 Corvette I like to play with when I have time.
Nice 4C and good job on the installation! 👏 Super interesting to watch!