though I had some problem with sea water It also th-cam.com/users/postUgkxa-FNYUOM93a388gi9a4brtSCEVmrHgJH land for finding any things very easily. (thought it would work as normal due to it being water proof within certain parts of the detector), on dry land and sand worked well. My first one, so still have lots to learn
I'd like to do this, and if I was going to go through the excercise, I'd try to make a detector that can detect metal at least 12" under the ground. Would more windings with thicker gauge wire accomplish that?
just one question doesnt the copper wire have to be insulated if it is to be wound over ......?? or else how will it behave as an inductor.? is it possible to use insulated wires instead..??
greetings, I connected everything nicely, I use the buzzer, but when I turn it on, it sounds so quietly, it's almost not heard at all, and when I bring the metal closer, it reacts, changing the sound. How to be heard louder? The battery is good, new, any buzzer that can be put on is soundingsame...
So I waved my hand over the pile of electronic parts that you required but they did not magically attach themselves to the bread board!!! Did I do something wrong? Did I move my hand too fast?
I've made the circuit directly but after putting the battery the buzzer only works for a tiny fraction of a second and then doesn't work until I remove it and re introduce it to the circuit. What is the reason for this and for to fix it?
i made that thing myself. kinda disappointed by the depth... its barely good enough to detect wires in a wall. gonna try to change it to a coil with a larger diameter and try it again. maybe that'll help.
In order to successfully use this detector, you kinda have to already know where the metal is. Simply passing the sensor over the metal won't detect it, you have to stop and hover over it a little, as you can see demonstrated in the first few seconds of the video.
Really, really nice work, my friend! :D Just one question: the buzzer must be that kind used in motherboards, right? That you connect a battery and it doesn't beep.
No it is not a buzzer if you talk about PC motherboards, It is just a small speaker, to use it as a buzzer you must use something like NE555 or a two transistors, one PNP the other is NPN and couple of resistors and one capacitor, that's it
Thankd now i can find my metal detector
Lol
😂😂😂Legend 👌👌👌
😂😂😂😂😂😂
Lol
If you make more turns in the coil, or larger diameter will it be stronger? Or thicker wire?
though I had some problem with sea water It also th-cam.com/users/postUgkxa-FNYUOM93a388gi9a4brtSCEVmrHgJH land for finding any things very easily. (thought it would work as normal due to it being water proof within certain parts of the detector), on dry land and sand worked well. My first one, so still have lots to learn
I'd like to do this, and if I was going to go through the excercise, I'd try to make a detector that can detect metal at least 12" under the ground. Would more windings with thicker gauge wire accomplish that?
It is going to make tesla coil
Mabye
Super sir nivu dodda scientist 🙏🙏🙏👌🏻👌🏻👌🏻👌🏻
Pls make a video demonstrating the circuit and explaining how it functions and detects
Or else, the object could be made by anyone , couldn't it?
Nice wrk...But how to create a successful circuit?....How much will give to the capacitor?..Please give a answer
What type of wires do I need? (Exept copper wire)
just one question
doesnt the copper wire have to be insulated if it is to be wound over ......??
or else how will it behave as an inductor.?
is it possible to use insulated wires instead..??
greetings, I connected everything nicely, I use the buzzer, but when I turn it on, it sounds so quietly, it's almost not heard at all, and when I bring the metal closer, it reacts, changing the sound. How to be heard louder? The battery is good, new, any buzzer that can be put on is soundingsame...
Maybe you need a larger buzzer for more sound. I am telling from my experience though
Which pcb did u use..shown pcb in video us plain have no connection
I'm stuck at cutting the cardboard, help.
Can I use another size of copper? For example 1 mm ?
Is it necessary to take 0.2mm wire
Can i post the link for synopsis of this project
So I waved my hand over the pile of electronic parts that you required but they did not magically attach themselves to the bread board!!! Did I do something wrong? Did I move my hand too fast?
I've made the circuit directly but after putting the battery the buzzer only works for a tiny fraction of a second and then doesn't work until I remove it and re introduce it to the circuit. What is the reason for this and for to fix it?
Can you please tell me how connections were made on circuit
What is the name of this machine which is use for like gumming in disc
Can it detect gold jewellery? Please answer
Se puede hacer con más pilas?
What is the maximum depth that this can search for?
sounds like a lot of hard working!!!!!!!!!!!!!!
Nice work! But how deep can it detect?
Sir we did this project.....but the output is not coming.....can you tell what could be the problem.....
What is the thing that you had put upon soldered wires and burned using lighter. Where will i get it?
its a heat shrink tube
Funciona bajo tierra?
Bhaiya pcb pr connection kese kiye apne bta dijiye
How deep can this device detect? Can it detect under the ground?
Sir
Please send the circuit diagram and block diagram of this ...
Or attach a link to collect data about this project
Good job and I will make the detector
will it detect things that are underground
Which ic did you used
Copper wire is necessary???
Key was detected ...in same way. Copper wire will be detect or not.???
In that metal coil which colour wire is positive side and which one negative
So beautiful
Disculpa una pregunta???? En que se va a cpnectar los 2 cables
Bhai ye kitni duri tak find kr sakta h
Wow you make your own Merit at your desk so cool I want to make my owner
Masllah birsantim.den
Gösteriyor mükemmel
Telmeli
hol apodrias darme el esquema con las conexiones completas mejor explicado por favor te lo agradezco
podrias explicar como hacer el circuito?
Sir I want the link of 2ų2 F capacitor
Cuanta distancia puede detectar a un metal??
PCB wireing mai 48om register laga sakte hai Bhai and do
Nice
Nice
when I want to detect deep of 1 metre and more , what should i do !? please answer , 😬
Buy one
saludos muy bueno, quiero hacer un pinpointer¡ como lo hago?
Hummmm very nice is it real or fake
how could you increase the range of the detection? more power?
Ben G inductors voltages depend of the number of coil turns. Sadly, the highter the number of coil turns the higher the heat produced.
Is 2uf2 a 2.2uf?
Luarrr biasa bos...
Out of curiosity just how well does this metal detector work before I go to the trouble and how much cost is involved
Very Good! THANK YOU!
Good creative, please share, how to make fish detectoor..
Capacitor 10uf/25v
Capacitor 2.2uf/50v
Is it compulsory We have To Do 300 Turns
Can the detector search the golds under the land.? I need it.
🤑
@@chess104 yo también necesito oro! :)
i made that thing myself. kinda disappointed by the depth... its barely good enough to detect wires in a wall. gonna try to change it to a coil with a larger diameter and try it again. maybe that'll help.
Nice!
Nice soundtrack too. Bow Chicka wow wow.............
It require on cd or off
In order to successfully use this detector, you kinda have to already know where the metal is. Simply passing the sensor over the metal won't detect it, you have to stop and hover over it a little, as you can see demonstrated in the first few seconds of the video.
I m not connected pcb board
how the detection deep?
1.5 miter Is it possible to look under the ground?
HOw deep it can detect?
what are the volts of the capacitors? Thanks
Bhai wire kis me lagay ho yrr
muy bueno LO voy a hacer
do you have the operation of the circuit for How to Make a Metal Detector at Home - Homemade
Bhai ye board kasey banaye mujhe malom nai horaha hai pls replay
From which app u use to join different videos
To what extent is the detection done?
Can anyone explain me the circuit please?...i can't understand?
Delhi m kha se miega
Pretty cool huh
thank you
How much meters it decet under ground
Work to gold ?
I mad it its work I find treasure box in treasure box I find 10 thousand dollar with three iPhone xs and one camera
Thanks a lot for this thing
hi
Can power be increased
nice detector
Please reply🙏🙏🙏how deep it detect
Anyone that has built this how well does it do for ground search and does it pick up silver?
Do you know what the range is
Muito eficiente e criativo
Hola ya lo as provado
I want to gold metal detector 6 fit depth detector making so please guide me
Bhai eske circuit ki sondaring pe vidio bhejo na
Can it detect gold
Where you connect metal coil wire in circuit
How to use soldering iron
no me funciono con un buzzere simple tuve que aumentarle una bocina mas grande y recien funciono, pero nose el porque ayuda
Sir what is this 2u2 F capacitor
Hasta que distanciaa de profundidaa alcansaa ah detectarr porfaaaaa respondemeee
Really, really nice work, my friend! :D Just one question: the buzzer must be that kind used in motherboards, right? That you connect a battery and it doesn't beep.
there is on/off switch on PCB, when i connect battery at that time it was in off position, so it doesn't beep.
MC's Creations yes.
No it is not a buzzer if you talk about PC motherboards, It is just a small speaker, to use it as a buzzer you must use something like NE555 or a two transistors, one PNP the other is NPN and couple of resistors and one capacitor, that's it
Square wave.... Sound
Where to connect the copper wire in the PCB board ?
Wow nice
Can I search gold or metals in depth ?
Sir iska range kitna feet tak hain...,?
Kaisa project banaya hai, project banana aata hai,bina details k project
what is the size of the pcb,
plz reply fast