Thank you so much for sharing this project with us. I am so looking for forward to ordering these slates and correct me if I'm wrong but you did these on your heat press at 400 degrees for 199 seconds 3 times? My cousin just passed and this is a great idea for his wife and daughter.
You are so welcome my friend! & Yes! you got it! Since I used my HTVRont Auto heat press it only goes up to 199 seconds. So I set it at 400 degrees and at 199 seconds and pressed it three consecutive times
I followed your lead and made 5 memorial slates. I am very happy with them! After pressing them right side up, I read that you’re supposed to press them upside down. 🤷🏻♀️
Hi!! I have a feeling your image sizing was changed when you were ready to print. When on your printing settings, check if your printer settings say "actual size" or if it's scaled at a higher percentage. I can make another quick video on this
Hi Lovely! My auto heat press goes up to 199! So, for this project, I pressed the slate at 400 degrees & at 199 seconds but three consecutive times. Hope this helps
Thank you for this one. It must mean so much to you, I could hear it in you're voice. They are just beautiful. Great work 💖
It truly does
They came out beautiful
Thank you so much!
Thank you so much, I’m doing my research on sublimation and came up with your channel I’m grateful you explained so well💕
Awesome tutorial!! This just makes me want to sublimate now. I’m taking notes ❤
So glad you liked it! The Sublimation world is SO much fun
You are really good! I had to subscribe just watching this video and the details you do! Great job
Love your personality
Aww Thank you so much 🥰
I always thought I had to use png. Thanks for the tip!
Anytime
Beautiful ❤
Thank you :)
❤
Thank you so much for sharing this project with us. I am so looking for forward to ordering these slates and correct me if I'm wrong but you did these on your heat press at 400 degrees for 199 seconds 3 times? My cousin just passed and this is a great idea for his wife and daughter.
You are so welcome my friend! & Yes! you got it! Since I used my HTVRont Auto heat press it only goes up to 199 seconds. So I set it at 400 degrees and at 199 seconds and pressed it three consecutive times
I followed your lead and made 5 memorial slates. I am very happy with them! After pressing them right side up, I read that you’re supposed to press them upside down. 🤷🏻♀️
How did the family like them?
Hi I tried doing this beautiful project but the image print out big and I size it the same way you did. Do you know what I did wrong 🙈
Hi!! I have a feeling your image sizing was changed when you were ready to print. When on your printing settings, check if your printer settings say "actual size" or if it's scaled at a higher percentage. I can make another quick video on this
@@AnnyCricutsDIY could you please make a quick video on this 😊thanks
Apparently I got a previous HTVRont press from the first batch. It only goes up to 99 seconds. Can you tell me your press time?
Hi Lovely! My auto heat press goes up to 199! So, for this project, I pressed the slate at 400 degrees & at 199 seconds but three consecutive times. Hope this helps