@@captainfancypants4933 😂 He is an interesting one. I unfortunately relate to him far too much on wanting to buy every interesting car that comes up, as long as it's cheap.
Jared is the true hands on wrench. He has and shows the small problems that us home garage mechanics really have when doing a project. Keep up the good work Jared. You are someone that the everyday guy can relate to. Everyone needs to subscribe and hit that like button om every video so he can afford to keep putting these out. Just for the record, I am not related to Jarod or Freddie, I just like their no BS channels
Jared seems like such a cool guy. Very knowledgeable and just very pleasant person. He could make an hour long video about manure and I would still watch it gladly.
Hi Jared. I've watching Tavarich for some time now and have thoroughly enjoyed his content. Since you've joined him, your knowledge and application have lifted both channels to a new level. Thanks a lot.
Jared is one of my favorite car you tubers. Honestly if he could make more videos with a channel of his own I’d subscribe in a heart beat.... but for now I’ll take this !
When pouring the oil try to keep the the pouring hole at the top so that u can get a better pouring angle. Basically flip the bottle to the other side to wat u started with
Good to have some fresh content from Jared. It's awesome seeing this project come together so quickly after it's relocation but I'm especially excited for the Honda Rousey rebuild. It kinda makes me miss my old '82 Accord.
The old drill press lathe. Been there a few times. I have the option of going the work and using the shop which has really nice equipment or fight the ..... ‘stuff’ at home. This will be a awesome car when your done.
Omg I laughed so hard when you said “it’s not about how you start, but how you finish...” And then proceed to spill a little more right before the very end! Thanks for that!
From somebody who's done a 2jz swap into my Lexus I got a kick out of this because it's hard ass work. As much as people try and pretend it's a easy swap it's not most people quit and sell half done projects
To do the oil pour: hold bottle SIDEWAYS, left side of bottle FACE DOWN. Approach fll hole slowly, keeping jug at 30° to 45° angle. This will prevent the dreaded chugging, and, slowly, start pouring. It works, and holding bottle sideways at an angle, is the key.
I absolutely love watching Jared work. Thanks for everything in and out of this time of quarantine. I learn a lot and this goes to show you can have something decent for the low. Thanks man! Stay safe!
I sure am glad Jared is still working on these builds. This is the content we like. I wish someone else was still turning wrenches instead of remaking Top Gear/Grand Tour....
Thank you mister jared i been waiting for a vlog for a while and literally iam just thinking about it and suddently you uploaded iam soo happy and iam glad you keep working on the build i just have one request when it finish please make it beautiful and show it to freddy yours 1million dollar show car ❤
Love Jared. Love the Channel. So many good things to say! And one constructive criticism: the Techno loop track during the Prof. Jared segment almost had me flipping the channel.
@ 14:04 Jared...do you sing to your small tools? i have a little snap-on hammer like that...i call it "sweet thang" and i sing to it when I'm using it😏
Hey I could only get 3 bolts In mine as well. Can you make a video on what you did to secure the trans better? Also join jz swapped z32’s on face book!
best video so far! i love the details of how and what you are doing!! this is awesome!!!!!!!!!!! thanks for showing the nitty gritty of engine swaps and conversions i cant wait to show this to people when they say just 2jz swap something loll!! they just have no clue how or what custom fabrication is needed to complete a swap like this! Stay safe brother and keep us posted!
He pronounced "Z" and "turbine" and other words properly. Much respect! Must have been trained in Canada. Kinda wish he'd address the Rolls Royce in the room.
Like your style.....But, my tip for you......On old Corvettes & Camaros.....When the clutch release fork isn't right....We extend the bellhousing pivot ball forward (stud) because if you get the fork too far off its designed geometry you are chasing your tail at times.....Hope things go well for you👍
The original would have been much closer and would have been the first goto, but following the adaptation kits instructions on what they want you to use.
That flywheel's the cleanest thing on that car, and that includes the title
Seriously please clean stuff up before putting it back on Jared!
Nice
@@d8ed78 depends if earl is going to be pretty the rest of the way...if he's going to be a rat tuner then who cares?
@@darrenswails it's my OCD kicking in 😂
@@d8ed78 it seems to be more ocd-people here, incl me.
Car Trek and Wrench Every Day?
Today is a good day for quarantine.
Keep up the videos I enjoy them I’m new to the channel
eh i can do with less hoovie in my life dude has a rug in his garage i wanna slap him sometimes
@@captainfancypants4933 😂 He is an interesting one. I unfortunately relate to him far too much on wanting to buy every interesting car that comes up, as long as it's cheap.
Aye man, wassup you don't love us no more, where's the uploads?
@@marquisethomas5611 Haha new video tomorrow, though nothing crazy. Have some spicier stuff coming soon. :)
Jared is very clear on explaining...
And knows how to keep a good flow..and keep it interesting..
He would be an amazing teacher..
Nice going.
Make sure your shaft slides in and out smoothly.
Words to live by.
Jared is the true hands on wrench. He has and shows the small problems that us home garage mechanics really have when doing a project. Keep up the good work Jared. You are someone that the everyday guy can relate to. Everyone needs to subscribe and hit that like button om every video so he can afford to keep putting these out. Just for the record, I am not related to Jarod or Freddie, I just like their no BS channels
Jared seems like such a cool guy. Very knowledgeable and just very pleasant person. He could make an hour long video about manure and I would still watch it gladly.
Freddie is out globe trotting in a super can while you fix his hoopties.... god bless you Jared lol
generic screen name no lie I prefer this content lol
Super can 😂 😂
I love how in depth he goes, makes a longer video & I understand cars better
That was 23 minutes?! It felt like 10! Keep up the great work Jared!
That's why I try to let all the uploads from my favorite tubers to build up
@@marquisethomas5611 I wish I could. I'm the guy that HAS to eat the M&Ms until they are all gone.
@@andytaylor1588 me too, so I hide the bag
Dude, you come across so naturally when you talk. You really seem to be coming into your own! Nice work.
He's a very smart guy. Seeing into the future a bit, I can see great things happening.
00:20 - Jared, you REALLY got more comfortable in front of the camera, and it's a true joy to see you be yourself :)
that turbo explanation was amazing!, you should deff do more explanations like that!
This is why Jared is the best. Actually turned this into a proper channel. Wouldn't have gotten Andrew doing half this
Hi Jared. I've watching Tavarich for some time now and have thoroughly enjoyed his content. Since you've joined him, your knowledge and application have lifted both channels to a new level. Thanks a lot.
Yes Jared! I was getting worried. Stay safe, stay inside... and work on cars haha
That's would be a questionable choice alright!
Jared is one of my favorite car you tubers. Honestly if he could make more videos with a channel of his own I’d subscribe in a heart beat.... but for now I’ll take this !
Dude..You Are Our Most Favorite Car Guy! Realize That Everything You Say is "that's what she said"
I giggled at "big shaft"
This happens a lot working on cars, haha.
When pouring the oil try to keep the the pouring hole at the top so that u can get a better pouring angle. Basically flip the bottle to the other side to wat u started with
The drill press lathe is my new favorite garage hack. Wow!
You have sooo much knowledge, I can't see why you are not on your own channel, or are you and Tarvish together? You two make a great pair
Good to have some fresh content from Jared. It's awesome seeing this project come together so quickly after it's relocation but I'm especially excited for the Honda Rousey rebuild. It kinda makes me miss my old '82 Accord.
Oo, new beats perfectly matching the video. Great lessons today Prof. Jared. Keep the lessons coming and of course stay safe.
Immediately making questionable choices.... well done with the one handed oil pour, Jared 👍🏼
The old drill press lathe. Been there a few times. I have the option of going the work and using the shop which has really nice equipment or fight the ..... ‘stuff’ at home. This will be a awesome car when your done.
Jared dropping car knowledge and comedic relief. What a combination.
Freddy is a genius bringing you on board Jared! Really really enjoy your videos!!! Thank you.
Nothing like seeing a giant Jared with a baby hammer to brighten your day lol!
Jared, you are one of the most wonderful people I ran into...many many thanks to Tavarish indeed
Jared is the man with the plan , he would be a great person to learn from
Omg I laughed so hard when you said “it’s not about how you start, but how you finish...” And then proceed to spill a little more right before the very end! Thanks for that!
Can't wait to see some of that Honda. I have a 1.9tdi myself but it's done 500 000 and needs a rebuild, looking forward to learning stuff about it
From somebody who's done a 2jz swap into my Lexus I got a kick out of this because it's hard ass work. As much as people try and pretend it's a easy swap it's not most people quit and sell half done projects
Jared talking about the size of shaft! Like a pro. No giggle
Glad to have another Wrench Every Day episode and have you back Jared! I hope you and yours are in good health and spirits!
I've no idea what you're talk about but your skill and knowledge is incredible!!! 😁😁😁
Who ever is editing the video's good job mate like the new style. That first beat reminds me a little of Tokyo Drift ;)
Yes, the beats are fantastic in this channel today
Wrench every day.... Jared every day!!! Nice video brother. Keep em coming. Great viewing.
Goddamn that's actually teaching me something about working on cars and i'm memorizing the knowladge, that's new for me
To do the oil pour: hold bottle SIDEWAYS, left side of bottle FACE DOWN. Approach fll hole slowly, keeping jug at 30° to 45° angle. This will prevent the dreaded chugging, and, slowly, start pouring. It works, and holding bottle sideways at an angle, is the key.
very cool, i luv the turbo lesson by jared.. i luv cars, but i'm not mechanically literate, & would mos def watch more episodes like this 1
I absolutely love watching Jared work. Thanks for everything in and out of this time of quarantine. I learn a lot and this goes to show you can have something decent for the low. Thanks man! Stay safe!
Jared - " here we have a Nissan 350 Zed X. Here is a 2 JZ motor."
He's appealing to our northern neighbors aye.
Eduardo Troche and us from across the pond
@@oldgreggscreamybaileys6618 Always zed
Holy shit I'm not the only one .
Adam is pointing out he said z different in the same sentence not that he said zed.
Man I love the progress. Thanks for actually wrenching Jared....
I missed you Jared
Hes oil-leaker not jared 😂 spilling all the oil
I need more geeky technical videos like this. I'm loving every bit
A little tip for you. Round the corners of the slot you cut out for the throw bearing. Sharp corners will create a stress riser and will crack
So hyped to hear this thing start up soon!
19:47 if you pour holding the container at maybe 20 degree angle with the opening on the higher end it gets a lot easier..
I sure am glad Jared is still working on these builds. This is the content we like. I wish someone else was still turning wrenches instead of remaking Top Gear/Grand Tour....
Turbo/boost creep very well explained. Thanks.
Jareds a cool hard workin guy man love you bro
Great work Jared and stay safe during these troubling times
Between this, car truck, ol cleetus, boosted bois, goon squad and car trek the only thing keeping me sane thru this quarantine in NY!
5:24 Nice crack on that starter mount!
Thank you mister jared i been waiting for a vlog for a while and literally iam just thinking about it and suddently you uploaded iam soo happy and iam glad you keep working on the build i just have one request when it finish please make it beautiful and show it to freddy yours 1million dollar show car ❤
Jared you are the best thing about TH-cam!
Great work too guys. I watch all ur channels. I'm in Jamaica and I appreciate ur vids
I just love listening to you and watching you work
Does anyone else just want to hang out with Jared and help him wrench?
Jared did a good job! Jared, you should team up with Oscar from B is for Build and build a car. That would be the best content on TH-cam.
Great episode with some really useful explanations! Loving your style and music Jared, keep that Z alive!
Great advice at the end Jared that’s why we love you!
Fun as always. Never need the marching band practice in the background.
Jared, thanks for your work. Please, keep it going and it will be really good if you manage to do more videos.
Love Jared. Love the Channel. So many good things to say! And one constructive criticism: the Techno loop track during the Prof. Jared segment almost had me flipping the channel.
Well done, Jared!! Can't wait to see Earl screaming to life!
LOVE that he explains it so well!
@ 14:04 Jared...do you sing to your small tools? i have a little snap-on hammer like that...i call it "sweet thang" and i sing to it when I'm using it😏
Good episode. I like how much you got covered in such a short amount of time
Loving the build in Wexford, Ireland, one handed pour is great😁
When Jared's one handed open pour looks netter than your two handed funnel pour.
Top Notch build so far .keep up the good work
Jared your absolutely wicked full respect to you god knows why your with Freddie
On todays episode of Wrench Every Day, Jared talks to us about all kinds of shafts
Jared. Post more. We love you.
Jared we missed u man finally some wrenching content
Best car channel on youtube
Zed X for us Canadians. Thanks Jared and keep up the great work.
Hey I could only get 3 bolts In mine as well. Can you make a video on what you did to secure the trans better?
Also join jz swapped z32’s on face book!
Cartrek and Jared on the same day, what a day to quarantine
Hey, Jared! If you rotate the oil bottle 180 degrees, so the opening is up, it pours much easier.
Did he just say....."They handle the big shafts very very well!"
Love watching progress on this, great video
Finally Jared you are the man, 300 zed x yeah
I appreciate jareds pronunciation of 2jz and 300zx.
Very cool video! I didn’t like the background music during the turbo explanation tho... but I loved the video
Woww Jared knows his shit, I actually learned a couple things this video.
I was missing you Jared!! Great video 👋🇦🇷
best video so far! i love the details of how and what you are doing!! this is awesome!!!!!!!!!!!
thanks for showing the nitty gritty of engine swaps and conversions i cant wait to show this to people when they say just 2jz swap something loll!! they just have no clue how or what custom fabrication is needed to complete a swap like this! Stay safe brother and keep us posted!
He pronounced "Z" and "turbine" and other words properly. Much respect! Must have been trained in Canada. Kinda wish he'd address the Rolls Royce in the room.
Nice we got more Earl leaker content keep it coming
In this episode we see how jared Changes to oil-leaker 😂😂
I hope it's not viral!
Like your style.....But, my tip for you......On old Corvettes & Camaros.....When the clutch release fork isn't right....We extend the bellhousing pivot ball forward (stud) because if you get the fork too far off its designed geometry you are chasing your tail at times.....Hope things go well for you👍
The original would have been much closer and would have been the first goto, but following the adaptation kits instructions on what they want you to use.
Amazing customization! Good job!
JARED! YOU THE MAN BRO!
Very informative jared!
Way cool. But why not clean and paint parts when they are out?
Thanks for teaching us good things 👍🏻
Just thought Id share that time lapse music was worth me buying into some hifi equipment lately.
Pink tool boxes as SO COOL