Beautiful to see Phanteks update the case with a full tempered glass. Looks so much better. Especially a blessing design-wise combined with the 3 5.25" external drives. Which makes no sense are not simply incorporated in modern case designs but rather thrown out altogether nowadays. 4070Ti proudly displayed, and a blu-ray player for the movie collection. What more could you want.
bought one of these cases a couple years ago and holy crap was I surprised by the quality of the case in general. Its a very solid case with solid hardware. I want to say mine came with 2 fans up front and 1 in the back. I will say the glass panel dose limit air flow a bit, but I modded a second exhaust fan under the GPU, and Intake on the bottom of the case, having to remove the PSU divider, which enabled the install of two 240 rads on the front and top. To anyone thinking of getting this case you will not be disappointed by, once again, the build quality.
Amazing review. Very informative and straight to the point. Thank you, you just presented my new new Cyberpunk 2077 case build! Thank you so much!!!! Finding all the part needed right now (06-28-2020 COVID-19 Pandemic) has been so stressful but I am about to finish up, avoiding all the price gougers!
Got mine a couple days ago. Some things to note that were different from this or other reviews I've seen: The front panel had 2x USB3, 1x USB-C, and the audio i/o and reset switch, no more USB2. There were 4 locations to mount SSD, but only 1 actual mount to put it on (plus the 2x3 large bay cages). Mine had a 200mm front and 140mm rear fan. The fan hub has all 4 pin connections (I opted not to use it though). Mine has the split large/small window layout.
Sounds like yours is the older model, cause the one on Phanteks site is the same one as one reviewed here, but I did see another review from 2014 that has the split window you mentioned. Guessing Phanteks must have refreshed the design at some point.
@@breadcrumbsyum When they updated the Pro M they filtered the front side intakes, are the front side intakes filtered on the Pro Full Tempered Glass? I basically want to see the difference between the two, so far newer has better packaging, glass window, magnetic filter on top and an extra ssd holder; is that the only difference?
breadcrumbsyum I’m old fashioned too... not really. I still have a crap load of pics on dvds. So I need to transfer them. Then I will remove the cd/dvd drive. I plan on using the 5.25 bays for whatever I want.
Nice to see the upgraded version review (the old case came out 5 years ago). All in all it helps with making those decisions as to which case suits 'your' build plans.
Mine is coming next week! Hope I can manage to stick in an Arctic 360 while keeping the 5.25 bays for my optical drive, otherwise I'll have to go with a 280 I guess!
@@thecurseofthegoat yes but I had to mount it so the tubes face the rear of the case (so on the left), because the hdd cage would block them, they touch the side panel but are not constricted. Zero problems, even mounted the graphic card (radeon reference 6900xt) vertical after a month and everything fits nice (tubes don't touch the card) This way you can mount one optical drive on the lower bay and even an hdd in the middle one (using adapters) After I bought this case bequiet has unveiled their new pro case that has a nice 5.25 bay at the bottom... Check it out (but it costs more than twice the price of the enthoo)
CONSPIR4CY here’s a link with dimensions and reviews, pcpartpicker.com/product/BfPKHx/phanteks-enthoo-pro-tg-rgb-atx-full-tower-case-ph-es614ptg_bk Hopefully this helps answer your question!
I have this exact case i got in 2016. They made a few tweaks. The side panel with the glass didn’t open like a door and covered only half the panel to display only the motherboard and the psu.
Got one of those and the fans are death quiet which is great for me because I use it for audio production. Cabling management and drive bays are perfect. May buy another one just like it.
Thank you, this was the most "recent" review I could find, it seems like it's still a good case all these years later. (It was kind of hard to hear your voice over the music, though)
Its a shame you cant find many reviews of this case but i think Phanteks did a OK job with what you would call their revision of the old acrylic case from 2014. As for the overall look, its great. But two things that stick out for me would be that it doesn't appear, at least in this CASE.. that the PSU basement is removable, and that you cant seem to mount fans on the sides of the drive cages. These were possible on the old case and that's one reason i'm still considering getting that one over this. Even though its older i think its just a bit better. Only time will tell.
I use the 2014 version, i remember looking at the spec sheet etc of this renewed version, and i think i saw pop rivets where the screws used to be (the frame), don't take my word for it tough. If you want to remove the internal "dvd support frame", then you should look into this, i personally removed mine as it was held on with screws. Instead of the acrylic window mine came with i ordered a solid side-panel from phanteks and will receive it in about a week.
i have this case i bought a pny 4080 super 16gb video card , it was 14 inches long i had to pull the lower hard drive cage to make the video card fit ,, i do love the case
THIS is the case i picked for a new build with z790 AORUS ELEITE AX, AND 1200 W POWER SUPPLY . I'M about two months away from finishing the build do to the high cost of some of the parts i picked out
music was mixed too loud. would have liked to hear more about how thing mount inside. is a fanless PSU advisable with this case? how loud are the fans that come with it? how does it look with the RGBs on? are there any manual fan speed switches? does it come with options for heavy GPUs to relieve pressure from the motherboard?
Such a helpful video, thanks so much! Please keep the music lower though lol - it drowns you out each time the song gets toward the middle and end, then loops and goes quiet again... :))
Thank you for the review. I have 2 questions does the front fan not have rgb? It seemed like it on a website I was on. Second question is there a removable filter for the front fan mesh like on the older version?
nice video was checking this case out for my next build wanted something big for wire management as well as a tower that can hold a water cooler. now for installing the water cooler do you have to bleed them once u got them hooked up or do u just hook up everything then add the fluid in?
I have the Enthru pro which is similar and you can easily remove the feet setup then the bottom should be flat and you can drill and mount whatever wheels you want that will work. I have some really nice wheels from a Old Cooler Master Stacker case I'm going to fit into mine. Surprised nobody does wheels on full tower cases anyone.
Spares for mostly all of them. Screws, shapes and sizes that you would normally use in pc building. I have the Enthoo Primo in white, and it is a beast. I just ordered the Enthoo Pro as well, (which is why i'm here commenting lol) but yes it comes with spares for mostly all of the lose-able tiny screws and pieces.
I can find sadly only one downside.. it was better to have only one 5,25" and have a bigger grill for a 3x120mm configuration, better airflow in the case you remove all the HDD cages inside. Also the port hub looks so 2010.. it was better to have the port always visible with better quality buttons. Is modular but to use only one 5,25" optical drive seems you have to keep installed the flat panel which cover the inside of the slots, which is a waste of space in my opinion. Not a restyling overall, just a new panel but I can't find real upgrades from the previous model. The pro M is nice because it has just one removable 5,25" slot, but ports are in a bad position for me and just 2, too much compromise also for space inside for a similar price overall. Is great speaking of modularity btw, it cost around 100€ now.. what are the alternatives? With at least 3x3,5" HDD slot and similar price.. considering is a full tower. I want to replace my old CM HAF922 for better airflow (2x200mm fan but the front part is completely blocked by the various slots).. and the other alternatives are Lancool II by Lian Li or the Cooler Master H500. :)
"It can get away from you "Yeah I know what you mean , some times my ex would jump my bones and she almost broke my back twice !! That was a big woman !!
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Beautiful to see Phanteks update the case with a full tempered glass. Looks so much better. Especially a blessing design-wise combined with the 3 5.25" external drives. Which makes no sense are not simply incorporated in modern case designs but rather thrown out altogether nowadays.
4070Ti proudly displayed, and a blu-ray player for the movie collection. What more could you want.
bought one of these cases a couple years ago and holy crap was I surprised by the quality of the case in general. Its a very solid case with solid hardware. I want to say mine came with 2 fans up front and 1 in the back. I will say the glass panel dose limit air flow a bit, but I modded a second exhaust fan under the GPU, and Intake on the bottom of the case, having to remove the PSU divider, which enabled the install of two 240 rads on the front and top. To anyone thinking of getting this case you will not be disappointed by, once again, the build quality.
Great audio, background music, set design, but under 1k subs? Keep it up, this is fantastic content.
I just got one because of the 5.25 bays. I got a surprise upgrade in the case...a PWM fan hub 😃
Me too. I needed something large, with Optical bays and fairly modern. About to build with it for my first rig later today.
I still OWN this tower and ive had it for 3 years and im finally upgrading to a corsair 7000... highly reccommend this case
What's your fan configuration?
Amazing review. Very informative and straight to the point. Thank you, you just presented my new new Cyberpunk 2077 case build! Thank you so much!!!! Finding all the part needed right now (06-28-2020 COVID-19 Pandemic) has been so stressful but I am about to finish up, avoiding all the price gougers!
Got mine a couple days ago. Some things to note that were different from this or other reviews I've seen:
The front panel had 2x USB3, 1x USB-C, and the audio i/o and reset switch, no more USB2.
There were 4 locations to mount SSD, but only 1 actual mount to put it on (plus the 2x3 large bay cages).
Mine had a 200mm front and 140mm rear fan.
The fan hub has all 4 pin connections (I opted not to use it though).
Mine has the split large/small window layout.
can the 200mm fan fit at the rear? many thanks
@@lyt_w8t No. A single 120 or included 140 at the rear.
Thanks for your reply! I just bought this case second hand for 50 bucks and had it delivered today! It's like a tank!!! What a case!@@Dude_Guyman
Sounds like yours is the older model, cause the one on Phanteks site is the same one as one reviewed here, but I did see another review from 2014 that has the split window you
mentioned. Guessing Phanteks must have refreshed the design at some point.
2022 I’m watching this using this case for my editing build
Just bought this exact case. I don't regret it!
This will arrive at my home in 8 days and I plan on using it for the next 10+ years
Did you ever regret it or is it good?
@@jesusm9385 I love it, no problems so far.
same... I still have a coolermaster from 2003 thats seen continuous use... that is until this new build is done.
This one caught my eye especially for someone who needs a lot of Hard Drive Space
Just helped my dad build his PC using this case. Really glad I went for the updated model. The tempered glass window is nice. Amazing full tower case.
Just wanted to mention that I chose this for my dad because he still uses optical drives...so old fashioned hah
@@breadcrumbsyum When they updated the Pro M they filtered the front side intakes, are the front side intakes filtered on the Pro Full Tempered Glass? I basically want to see the difference between the two, so far newer has better packaging, glass window, magnetic filter on top and an extra ssd holder; is that the only difference?
breadcrumbsyum I’m old fashioned too... not really. I still have a crap load of pics on dvds. So I need to transfer them. Then I will remove the cd/dvd drive. I plan on using the 5.25 bays for whatever I want.
What did you do with the 12v SATA cable that says consult manual before connecting? This is my first go at building a PC. Thanks in advance!
Nice to see the upgraded version review (the old case came out 5 years ago). All in all it helps with making those decisions as to which case suits 'your' build plans.
Mine is coming next week! Hope I can manage to stick in an Arctic 360 while keeping the 5.25 bays for my optical drive, otherwise I'll have to go with a 280 I guess!
Did the 360 fit? I'm looking at doing the same.
@@thecurseofthegoat yes but I had to mount it so the tubes face the rear of the case (so on the left), because the hdd cage would block them, they touch the side panel but are not constricted.
Zero problems, even mounted the graphic card (radeon reference 6900xt) vertical after a month and everything fits nice (tubes don't touch the card)
This way you can mount one optical drive on the lower bay and even an hdd in the middle one (using adapters)
After I bought this case bequiet has unveiled their new pro case that has a nice 5.25 bay at the bottom... Check it out (but it costs more than twice the price of the enthoo)
Buying this case for a new PC build next month....can't wait to get started! Good video btw!!
Woods2Waters I have this exact case, absolutely stunning would recommend 10/10
CONSPIR4CY here’s a link with dimensions and reviews,
pcpartpicker.com/product/BfPKHx/phanteks-enthoo-pro-tg-rgb-atx-full-tower-case-ph-es614ptg_bk
Hopefully this helps answer your question!
I have this exact case i got in 2016. They made a few tweaks. The side panel with the glass didn’t open like a door and covered only half the panel to display only the motherboard and the psu.
Got one of those and the fans are death quiet which is great for me because I use it for audio production. Cabling management and drive bays are perfect. May buy another one just like it.
Thank you, this was the most "recent" review I could find, it seems like it's still a good case all these years later.
(It was kind of hard to hear your voice over the music, though)
Its a shame you cant find many reviews of this case but i think Phanteks did a OK job with what you would call their revision of the old acrylic case from 2014. As for the overall look, its great. But two things that stick out for me would be that it doesn't appear, at least in this CASE.. that the PSU basement is removable, and that you cant seem to mount fans on the sides of the drive cages. These were possible on the old case and that's one reason i'm still considering getting that one over this. Even though its older i think its just a bit better. Only time will tell.
I use the 2014 version, i remember looking at the spec sheet etc of this renewed version, and i think i saw pop rivets where the screws used to be (the frame), don't take my word for it tough.
If you want to remove the internal "dvd support frame", then you should look into this, i personally removed mine as it was held on with screws.
Instead of the acrylic window mine came with i ordered a solid side-panel from phanteks and will receive it in about a week.
@@coffeepot3123 At 4:39 you can see screws, so I hope that everything of the metal frame can be disasembled the same as in the old 2014 version.
i have this case i bought a pny 4080 super 16gb video card , it was 14 inches long i had to pull the lower hard drive cage to make the video card fit ,, i do love the case
THIS is the case i picked for a new build with z790 AORUS ELEITE AX, AND 1200 W POWER SUPPLY .
I'M about two months away from finishing the build do to the high cost of some of the parts i picked out
Was checking out Phanteks' website, and apparently it can fit two 120mm fans at the bottom?
Background music is too loud.
6:19 thanks thats what i needed to know
that is a true beautiful case
I am 971st sub :) keep up the good content!
I do like what I see! Woof!
music was mixed too loud. would have liked to hear more about how thing mount inside. is a fanless PSU advisable with this case? how loud are the fans that come with it? how does it look with the RGBs on? are there any manual fan speed switches? does it come with options for heavy GPUs to relieve pressure from the motherboard?
Such a helpful video, thanks so much! Please keep the music lower though lol - it drowns you out each time the song gets toward the middle and end, then loops and goes quiet again... :))
I love the closeups and presentation style. I want to see the product, not the presentor just standing there talking and thats what I got.
Didn't see how to install the power supply. Nice case just bought one, hasn't arrived yet.
Awesome video man
Thank you for the review. I have 2 questions does the front fan not have rgb? It seemed like it on a website I was on. Second question is there a removable filter for the front fan mesh like on the older version?
nice video was checking this case out for my next build wanted something big for wire management as well as a tower that can hold a water cooler. now for installing the water cooler do you have to bleed them once u got them hooked up or do u just hook up everything then add the fluid in?
Is it possible to add wheels on the bottom somehow?
Anything is possible :)
(but we've never tried that)
I have the Enthru pro which is similar and you can easily remove the feet setup then the bottom should be flat and you can drill and mount whatever wheels you want that will work. I have some really nice wheels from a Old Cooler Master Stacker case I'm going to fit into mine. Surprised nobody does wheels on full tower cases anyone.
I would have liked to have seen the package accessories. What spare mount plates and screws and stuff come with it?
Spares for mostly all of them. Screws, shapes and sizes that you would normally use in pc building. I have the Enthoo Primo in white, and it is a beast. I just ordered the Enthoo Pro as well, (which is why i'm here commenting lol) but yes it comes with spares for mostly all of the lose-able tiny screws and pieces.
You forgot about the accessory box
I like it
I can find sadly only one downside.. it was better to have only one 5,25" and have a bigger grill for a 3x120mm configuration, better airflow in the case you remove all the HDD cages inside. Also the port hub looks so 2010.. it was better to have the port always visible with better quality buttons. Is modular but to use only one 5,25" optical drive seems you have to keep installed the flat panel which cover the inside of the slots, which is a waste of space in my opinion. Not a restyling overall, just a new panel but I can't find real upgrades from the previous model.
The pro M is nice because it has just one removable 5,25" slot, but ports are in a bad position for me and just 2, too much compromise also for space inside for a similar price overall.
Is great speaking of modularity btw, it cost around 100€ now.. what are the alternatives? With at least 3x3,5" HDD slot and similar price.. considering is a full tower. I want to replace my old CM HAF922 for better airflow (2x200mm fan but the front part is completely blocked by the various slots).. and the other alternatives are Lancool II by Lian Li or the Cooler Master H500. :)
Can you put a DVD/CD-RW? ( dvd/cd reader/writer)
Yes. Fits in the front bay slots.
this case have light wave effect?
I have the 420 water cooler Make sure that your motherboard will fit along with your 420 water cooler
3.54 ... it is .. fancy!! 😎😁
great content dude
I want to buy this case! Does this case come with a 6 channel fan controller like the other enthoo pro models??
Yes it does, and that's one thing I noted that he didn't mention at all.
Mine did
youtube defaulted to 480p
i like this
how come you never upload
hahaha I love your intro
Here at 29,042 views.
HEYYa.. V SUS.. picheal here
Annoying music ..
I just picked this case up for 100 bucks on newegg
I picked it up on Amazon for $100, has a 6 PWM fan hub on the back yayyy for me.
you never mention the model number.
Audio to loud.
Turn it down?
What?
Nvm I get what you're saying
Stop with the loud music!! ruins the video review
Where is the RGB?
BBBtttthhhhhhhhhhhhhhhhhh * blows a raspberry* lol
Background music is terrible.
Chill out
@@devlenruby6681 nah
@@geometricelectric8954 lmao ight
"It can get away from you "Yeah I know what you mean , some times my ex would jump my bones and she almost broke my back twice !! That was a big woman !!