Install new webbing on Lawn chair | How to
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Www.lawnchairusa.com
Not sponsored. Just really like their stuff. This is a how to guide on re-doing the webbing on your old lawn chairs. I promise My speech and stuttering and breathing will get better as I learn this Filming thing.
BEST how to video for lawn chair weaving I have seen. Thank you !
Wow thank you so much!
Great job ! If you can't fix your chair after watching this then go back to bed.
Excellent instructions. I ran short of webbing by about 4 inches. If I knew I would have added slightly less than 4 inches to each strap. Otherwise easier than I thought. The tip to have the curved part of the clip point to the long part of the webbing was spot on and saved me a lot of guesswork. I restored two 40 year old lawn chairs. They are so much lighter and well made than the modern stuff.
Great video! Fantastic detailed description. I have a couple of old chairs needing new webbing. They have all tacks that look a bit different than the ones on your chairs... the webbing is actually crimped in between two layers of the tack. The job looks way too frustrating, I may actually switch to screws... if I can get a big enough screw to fit into the slot without slipping. Until then, these old dogs are going back into the garage...!
Thank you. I was/am making this way harder than I need to. Wish me luck.
Best of luck. I hope I get you in the right direction at least
I have the 'Tack" clips and so glad you showed them. You did a great in explaining it all !! I have been so confused on how they go back but this has helped a lot only problem is my chair shows holes on the metal tubing on the back to front seat then across the back left to right there are slots holes in the metal tubing ..weird huh? but the slots seem to somehow hold the clips easier then the holes . I just gave it a try to see So this has been a real headache and I am about to throw this whole thing in the garbage . My hubby is a great repairman on most everything but he doesn't want to tackle this one he has a floor tile he has to lay and the chair has been sitting partly done since last year. :(
Honestly, I am not sure if I will be working with tacks and clips again. It really was a pain. I recently did a chair that used screws and it was SO EASY. I like fixing things and getting use out of them, but i dont think the tack and clip chairs are worth it. That is very weird about your chair! Who knows what that is lol
@@brantheman6486 well it's done and I am glad and I will not do another one yes screws it much easier !
I also thank you for showing the tack clips. Our lawn chairs also have tack clips. So very glad I had this video. I have almost completely rewebbed one of our lawn chairs with tack clips. I have reinstalled a couple new webbing strips into the other one where I replaced two of the webbing strips last year, and also reinstalled the webbing strips I installed last year in the one I've almost fully rewebbed.
Last year I saw some videos on rewebbing lawn chairs, but they only mentioned and showed clips and screws. They didn't mention or show tacks. So I installed a couple of the webbing strips on both of them last year but not correctly and so the "tacks" popped back out. Now those two on each of them, thanks to this video, I have installed correctly and gotten the tacks to click into position. So now I have one folding chair almost all rewebbed, another with the two strips I replaced now installed securely.
Thank you ! Can this be done on a beach chair .I'll have to drill holes but it's ok .what do u think
Thanks for the best explanation I've found!
How did you get the tacks out? I have a chair older than yours with tacks all around and I can not get even one out. Any advice?
How do you remove the clips!
Great video! Can you tell me how much webbing you used for one chair? I see it comes in 50’ and 150’. I have 2 chairs to redo.
Thank you so much! I used about 30 ft. Leave room for mistakes and the curling at the edges!
Very helpful, thanks!
Thank you so much! I am glad it
Helped
This video was really helpful, thanks for posting it. However, I have a great old glider chair that I am trying to re web with clips. One side goes into the rectangular slot very easily but when I pull to stretch the webbing to the other side, the clip won't go into the hole. I tried using a screwdriver to open the hole a bit more but that didn't work. It either didn't go in or the webbing had to be very loose. Any thoughts or suggestions are greatly appreciated.
Great instructions!
I have all tack clips and cannot get any of them out!
where can you get the clips from?
How do you know to buy 50 yards or more?
Some good tips
Thankyou very much
Very welcome!
Ginger billies brother does lawn chairs 😅
I accept that compliment
@@brantheman6486 good video. Just couldn’t resist
👍
You’re placing the clip into a hole? There’s no mention of that if there is a hole. So begin with what you have existing on the chair, how you’re going to anchor it and have a better close up placement into the hole. We’re not reading your mind like we know how to do it or how you’re doing it.
You’re showing the clip but not explaining how the clip/tack anchors and not come off. It takes just one but not a good demonstration. Sorry
The curved part of the clip points to the long part of the webbing. Then it just slips into the hole. Think of it like you stick your finger on a hole to pull a board. You would naturally curve your finger towards the way you are pulling.
How did you get the tacks out? I have a chair older than yours with tacks all around and I can not get even one out. Any advice?
Best video I found so far! None have mentioned tacks!
Super helpful. Thanks.