Great help, Had my T4 15 years and doing door roller job and could not see if old roller went back or forward to remove, this was a great help mate. Yeah grease idea bad! its operating in an area collecting crap and would shorter life as the rubbish particles stick and foul new roller. Thanks again for good old TH-cam.
I just did this job on a mates van, managed to get the new roller in from the front of the rail so there was no need to remove the step or the stopper.
Simply undo the roller and move it as far forward (towards front of van) as it will go. It will release from the rail. Pay attention to how it comes out and you will have no trouble fitting the replacement.
@DERBYSAM No worries. I just replaced the bottom roller, on the same van for the same person, a few weeks ago. This time it took about 2 minutes. Glad to hear it saved you some time.
Thank you! I’m not sure why not, but I know they came from the factory with no grease, so they are designed to just roll freely. Mine is still working perfectly fine and I haven’t used any grease. Good luck!
Great help, Had my T4 15 years and doing door roller job and could not see if old roller went back or forward to remove, this was a great help mate. Yeah grease idea bad! its operating in an area collecting crap and would shorter life as the rubbish particles stick and foul new roller. Thanks again for good old TH-cam.
Thank you this was so useful!! My entire door has come off today and no mechanics about so I'll be attempting this as soon as the part comes
No problem. It’s as easy as it looks!
I just did this job on a mates van, managed to get the new roller in from the front of the rail so there was no need to remove the step or the stopper.
That’s good to know!
How did you put the bottom roller in without moving the stop or step?
Simply undo the roller and move it as far forward (towards front of van) as it will go. It will release from the rail. Pay attention to how it comes out and you will have no trouble fitting the replacement.
@@T4TipsGuides thanks for this. Saved me so much effort today
@DERBYSAM No worries. I just replaced the bottom roller, on the same van for the same person, a few weeks ago. This time it took about 2 minutes.
Glad to hear it saved you some time.
This helped me a lot today. Thank you so much :)
Glad it went nicely. I just did the same but now my door is much stiffer.. and clicks loudly as the door swings out and starts to go back.
Made it look easy Joel, nice job
Well done young man
Well done ! Calmly does it
why didn't you check the shape and size before ordering the part? great vid though
I fell into the trap of assuming there would only be one design - lesson learned!
@@JoelsStuff been there done that! just when you think you know everything there is to know! lol
Nice job and very well explained and filmed/edited.
Quick question, why is it that there is meant to be no grease in there ?
Thank you! I’m not sure why not, but I know they came from the factory with no grease, so they are designed to just roll freely. Mine is still working perfectly fine and I haven’t used any grease. Good luck!
I imagine dirt would stick in the grease and turn into a cutting paste wearing the parts out prematurely
Cheers mate, super helpful.
Hi mate,
Great video, the short roller is what I'm after and can't find one anywhere do you have a link from where you got it from.
cheers Steve.
Hi Steve. If you search ebay for “zzdr29” there are a couple listed for £10. Joel
Got it cheers Joel.