2020 Kawasaki Ninja 1000SX | DE CAT Exhaust install (LOUD)
ฝัง
- เผยแพร่เมื่อ 23 ก.พ. 2021
- Full install of the Max Torque Cans de cat pipe on the Ninja 1000SX. Sound comparison between the standard end can with the de cat and the SP Engineering end can. Some on the road footage gives a full sound perspective.
- ยานยนต์และพาหนะ
Just did this on my 2021 ninja 1000sx. I used the same link pipe from Max Torque Cans, and following your video, it turned out great. I have a custom shorty slip on that I use and it sound absolutely phenomenal. Thank you so much for this video. It helped me tremendously!!!
Glad it helped you out 👍
Hi brother…could you please share the power gains …thank you… safe miles
@@awesomeagnihotrisvlog I didn't dyno it, but I can tell you that there is just a little power gain, not significant. More importantly it feels like the engine can breath better and smoother.
Awesome sound brother...
I was going to do this, but then I saw the Delkevic full exhaust with 8" carbon fiber can for $575 and bought it. It does not need tuning and is loud. Louder than the Acra on a RSV4, but not as bad as a SC1 on a 1200 Monster, I couldn't hear myself think on that bike. Yours sounds great.
so you have havan't tuned the bike with that full sistem? how is that possible?
Love it!! This helps so much, thanks!
Fantastic from Melbourne 😎👍
well done congratulations. I have a 2014 model z 1000 sx and I'm thinking of doing the same
any issues you've noticed throttle response, fuel consumption, or any flat spots in the Rev range? thank for the video very informative
Don't know if it is loud , but the pipe sounds GREAT
Ohhhhhhh wooooow lovely sound wow !!!!!
Slightly different question, now that you have cut the cat housing, can you remove the actual cat element from the collector without damaging it?
What paddock stands do you use & are they good? Cheers!
Does the bike run ok or have you had it remapped or pc5 put on
How hard is to get the header pipes off as they're a bit awkward to get to w/o swinging the radiator a bit out of the way (is what i think) - I need to get that job done because they're rusted and an eyesore - need to clean it before priming and painting - did you reuse the gaskets ? cheers
What stand do you have? I bought one that said universal but it dosent fit.
Handheld grinder, yes how accurate was that.
can you share a link where i can buy the decat pipe ?
Hi there.. can I install this system to my kawasaki 2020 . 650 cc ????
Looks and sounds great! Gotta check if Max Torque will ship to the US now.
Semi-related: do the factory panniers still fit with that slip on? It looks like it mounts much higher up than the stock end can.
I have some panniers available to me to try so I'll do that and get back to you 👍
@@s4c488 did you ever get to give this a try?
Did you notice a performance increase?
Please help, after de cat, my bike has a engine code 64, shows air switch valve.
OBD ii shows secondary air injection system control A circuit high.
I erased code, but come back again.
Is it because de cat?
Thanks a lot.
Красавец. Я бы тоже удалил катализатор! Надо подумать и сделать как у тебя!
Remap or dyno run for an interesting follow up video mate!
Will it pass an MoT. I have the SP full carbon slip on, love the look, but mega disappointed with the sound. By cutting the cat, you can’t put it back together to get through an MoT, so would it get through an MoT like that?
Does the ecu need flashing or remapping???
Did you have to tune it?
Does this require a tune since replacing the stock exhaust makes the bike run more lean in fuel
Yes if you ever have to decat then always tune
Can you please link where I can get all the parts necessary to have this set up on my 2020 ninja 1000sx
maxtorquecans.com/kawasaki-ninja-1000-sx-performance-stainless-de-cat-exhaust-pipe-clamp/
Did you have to flash the ECU when you made the switch?
Nice vid. Now the cat is no longer in the way. Do you think there’d be room to fit a centre stand?
There might be room for one, not sure if there is any mounting points available though.
@@s4c488 thanks.
Which exhaust?
Is there another piece needed to hook the link pipe to the stock end can?
All you need is the pipe and clamp they supply. Put one on my bike a few weeks ago. Love it!
Like below the end can comes with a link pipe which will fit straight to the remaining pipework off the standard back box.
Eh that’s gorgeous bud, been thinking of this myself however insurance can be arses with pipes- You enjoying it?
I found the stock was surprisingly fruity
Thanks 👍 yeah they certainly can be. Yeah im loving the noise it makes, the big pop on the up shift are loud bit camera doesn't do them justice at all.
Yeah I think for commuting or touring, you could just de cat save some weight and still have a nice sound for just over £100
Hi brother.. can I install this system to my 650 kawasaki 2020 ???
Please check the max torque cans website. Link in the description. They might have a de cat option available for the 650
Genuinely can't find the decat link pipe anywhere. Even on SP website lol.
maxtorquecans.com/kawasaki-ninja-1000-sx-performance-stainless-de-cat-exhaust-pipe-clamp/
Can we fit arrow exhaust with this de cat
As long as the link pipe is 51mm diameter it will fit the de cat pipe.
Is ECU tuning required if Cat is remove ? Thanks
No not required , but if you would
like more popcorn sound is recommended 🤘😎
Scrub that I found it lol. Well the decat but I'll now try and find the link pipe🤣👌🏻
maxtorquecans.com/kawasaki-ninja-1000-sx-performance-stainless-de-cat-exhaust-pipe-clamp/
Glad you've found it now and enjoy the sweet sounds once installed 👍
For Germany it’s a no go..don’t forget your creditcard 😉
Why?
@@SavaVidakovic They can't even swap their mirrors in Germany. No mods.
same in Italy; they run off same nazi bureacracy
What did the insurance company say when you told them, how much did your premium go up?
who cares what they say, nothing to do with insurance anyway.
Does it run cooler
I haven't noticed anything. I had only covered short distances before changing the exhaust though.
chur nz rules
So yea....
Big can makes it almost the same😂
In Australia it's a$12,000 fine for this😢
Really?
Just leave that place.
few kilograms saved as well as eco BS.
Hope you like it so noisy because there's no going back now.
Sure do, a baffle is available for the end can.
@@s4c488 is it sended with the db killer ?
You can buy the dB killer separately, not sure it they come with one though, mine didn't have it as it was second hand.
Why buy a sport tourer and stick a pipe on it that will drive you nuts on long journeys , or maybe you won’t be touring on it.
"De cat" => Remove catalytic converter and spew pollutants.. This bike will make more poison than a car. (I own a Ninja 1000 too fwiw)
Is that all you care about... whether it looks or sounds good, what about the planet, since you've removed the cat?
Call Greta and ask her out for a date….if you let her talk all the way through dinner you can then boink her and she could care less about the planet; she just needs a true oil change
Karen
Your arse makes more pollution than this bike. Kiss off.