How To Configure Vlan and VoIP using Cisco Packet Tracer Latest | ODDHYAN

Assalamualaikum. Dear Viewers Here I have tried to show you, how to configure Vlan and how to configure IP Phone with Cisco Packet Tracer.
Here I have use 1 Router and 1 Switch 2 IP Phone and 2 Computer. I create 2 Vlan ( Vlan 10 Name as Data and Vlan 20 name as Voice) Vlan 10 use for Data communication and Vlan 20 use for Voice call over the internet protocol.
Facebook: zahangir20bd
Like my Facebook Pae
Facebook Page: oddhyan
Like, Subscribe and Press the Bell Button:
TH-cam Channel: / @oddhyan4982
#Cisco #IP Phone #VoIP #Voice #Vlan #networking #ccna #configuración

[@chriskouakou5464]

Thanks , very good job

[@alimehrabi1337]

Incredible , Thankyou

[@user-lu3xj4mp2n]

Great , you saved much time

[@ranababucse]

So wow sir

[@oddhyan4982]

Thank You!

[@aayanasser2873]

Thanks ❤❤❤❤❤❤

[@oddhyan4982]

Welcome and Thanks for Appreciation

[@DevElias]

Is it possible to configure the electronic secretary in the packet tracer using an IP phone?

[@oddhyan4982]

Yes, you can configure an electronic secretary or an automated attendant system using Cisco Packet Tracer with an IP phone. Here's a general outline of how you might set this up:
1. Topology Setup: Create your network topology in the Cisco Packet Tracer. Include the necessary devices such as IP phones, a Cisco Unified Communications Manager (CUCM) server, and routers or switches if required.
2. IP Phone Configuration:
* Configure your IP phone devices with appropriate settings like IP addresses, subnet masks, default gateway, and DNS server information.
* Set up the IP phone extensions and phone lines that will be used by the electronic secretary system.
3. Cisco Unified Communications Manager (CUCM) Setup:
* Install and configure the Cisco Unified Communications Manager (CUCM) server in your topology.
* Add the IP phones to the CUCM and configure them with extension numbers.
4. Automated Attendant Configuration:
* Within the CUCM, set up the automated attendant (electronic secretary) service. This can be achieved using features like Cisco Unity Connection or Cisco Unified Communications Manager Auto-Attendant (CUCM AA).
* Configure the automated attendant to answer incoming calls and provide menu options or other prompts for callers.
5. Call Routing:
* Configure call routing within CUCM to direct incoming calls to the automated attendant.
* Define rules for handling calls based on the number dialed or other criteria.
6. Testing:
* Test your setup by placing calls to the configured IP phone extensions.
* Ensure the automated attendant picks up incoming calls and functions as expected, providing the appropriate prompts and options.
7. Troubleshooting and Adjustments:
* If necessary, troubleshoot any issues encountered during testing.
* Make adjustments to configurations as needed to fine-tune the behavior of the electronic secretary system.
Keep in mind that the specific steps and features available may vary depending on the version of the Cisco Packet Tracer you are using and the features supported by the simulated devices. However, this general process should give you a good starting point for setting up an electronic secretary system with IP phones in Cisco Packet Tracer. Thanks for your Comments.........❤️