Merry Christmas Mr Pants, or Happy Yule as in my case. Thank you again for taking the time to share your activities with us. I hope this year has brought you the gateway to success you seek and that only the joy of a hard job done well remains!
Happy Christmas Ants! I hope you have a good time with Supermom and The Devils! Welding wire spools are sold based on weight I thought (I've not bought any for ages). 1mm & 0.8mm wire will be the same spool weight, so the same amount of material, but the 0.8mm will take longer and more steps to produce. Probably not that much more, but who knows.
Your channel is my favorite. Seriously I watch alot of building channels. You are the Rock Star of I can make that shit happen, guy. I'm 63 I know alittle, I appreciate perfection as best as possible. Cheers
I asked Santa Clause to bring you several pairs of really good knee pads. You do not to want to injure your knee caps while you are young. Merry Christmas and Happy New Year... You are still my HERO.
Andris Merry Christmas to you and the Superfamily. You make the channel absolutely fantastic..thanks for all the video presents this year it is greatly appreciated !!❤ brother from an American human!!
14:30 I would think outside the box and make it so that the end wall could be opened and the rails extended to accept the rare case of looong morning wood. It would involve some extra leveling work for the parts that extend out of the shed. The wall should have a door or some kind of closable opening, large enough for the sawmill to pass through.
Merry Christmas Andris, best wishes to your mum, and the rest of your family, take care. PS, just mill planks for the walkway on the saw mill. Make it like a woodshed floor, strips of timber about 35 mm wide with 10 mm gaps for the sawdust to fall through.
Even your carport is in a festive mood, giving you your screwdriver back for Christmas! Merry Christmas and all the best for the new year and all your upcoming projects!
I have a huge spruce log that needs cutting. But first I need to get it out of the forest. Too good to leave just to rot or make firewood out it. But first finish the the Sawmill shed and then I can supply you with quality material. Happy Christmas.
For the carport beams sagging, instead of posts you can put triangular trusses in the roof space to effectively hang the beams from the trusses instead of propping up from below.
Never leave tape rolls laying down in the shop, or let anything lay anywhere near them. Not even in a box or drawer. As soon as there is a dent or anything on the edge, it'll rip apart right there every time you want a piece. :)
Wow! Holy crap man!! Great Christmas presents Ants!! Spend my Christmas eve watching a Ants Pants video!! Wonderful Christmas!!! Thank you Mr. Pants and Merry Christmas to you and the super family!!!!
Ants, Merry Christmas you and your family! This video was super suprise.I was watching just your many years old video (renovating main house). thanx again, keep going and take care of yourself.
Another great video, and Merry Christmas! You may want to consider adding jamb nuts to the bed adjuster feet Unfortunately, you already welded a washer to one side and a nut to the other ... but nothing the grinder cant fix lol Just a suggestion, but I imagine there will be quite a lot of vibration between the saw running and dropping logs on the bed. Would just hate for the bed to be constantly "adjusting" itself out of level since there isn't a jamb nut on each adjuster Regardless, thanks for another awesome video! Edit: Just made it to the part where you anchor the bed to the slab. Perhaps that makes the jamb nuts unnecessary! Would still hate to see those legs constantly loosening off, but maybe it doesn't matter now with the anchors 😀
I’m just going to throw this out there Mr. Pants. You seem to do things the hard way instead of the smart way but you’re very entertaining and a lot of fun to watch. You definitely have to be the hardest working TH-camr out there and I can’t wait for the next one. Merry Christmas and Happy New Year!
Great job Andris. Very impressed with your saw mill. I'm jealous! Was wondering if you had thought of putting a collection bag or something on the saw dust spout? That way you wouldn't have a bunch of sawdust on the ground to deal with and you could use what you collect in the bags for various purposes. Merry Christmas!
Kalėdų senelis ('Christmas Grandfather'). Linksmų Kalėdų, Dimitrijau. Merry Christmas! Linksmų šventų Kalėdų! And a very Merry Christmas to you all. Mr Ants, Pants
Small thing that I thought I’d point out, Andris: one of your center supports is open to rain at the top, but has no exit for it at the bottom. This won’t immediately be a problem, but over time it will rust out the inside of the metal tube. Otherwise, great build!
In the US we have a sheet called expanded metal. It's basically little triangle shapes in the sheet metal. 4 ft x 8 ft sheet. Relatively inexpensive. You could see if Estonia has anything similar. Then all you would need to do is make a frame of metal to sit half a sheet on.
We used to throw a tarp over frozen equipment and put a propane heater under it. Just about any heater will work. I've even seen guys put oil/diesel in a metal bucket and light it.
What a treat a video up before Friday. Very nice Christmas present. Thank you for all the videos. You made the sure they're all great. Love your sense of humor learning a few swear words in astonia. LOL. Merry Christmas to you and your super.Mom super sister supersanta Claus.Anybody else that's there merry christmas
Gonna drop this here and head back to eating a bunch of Christmas pudding
Yea it's grand we'll keep an eye on it for you
Oooh nice i love christmas pudding too!
Il take this as my Christmas present
Merry Xmas from Liverpool UK
@FOOKTH-camNUMBERS thanks man you too!
Merry Christmas Ants. Thanks for a great year of entertainment.
thanks for being here and watching
Ditto😃
Merry Christmas to everyone
Merry xmas
Thankyou Andris for the excellent program this year .😊
Merry Christmas , our Estonian brother from Lithuanian brother.
Christmas has come early! Andris has posted bonus content!
I’m loving the Estonian porta power you used on the rails!
me too lol
Merry Christmas Mr Pants, or Happy Yule as in my case.
Thank you again for taking the time to share your activities with us. I hope this year has brought you the gateway to success you seek and that only the joy of a hard job done well remains!
You should make the Yanmar a quick attachment for Joseph. Then you won't be needing the tracks anymore 😄
Happy Christmas Ants! I hope you have a good time with Supermom and The Devils!
Welding wire spools are sold based on weight I thought (I've not bought any for ages). 1mm & 0.8mm wire will be the same spool weight, so the same amount of material, but the 0.8mm will take longer and more steps to produce. Probably not that much more, but who knows.
New vid dropped just as the guests left, couldn't wish for a better timing.
Thank you for what you're doing Mr Pants and merry christmas everyone!
Merry Christmas! Hyvää Joulua 👌🤭🇫🇮 Toholampi Finland
Bless You and your entire family this Christmas Season
Jamais de repos pour les braves, bon boulot et bon courage. Joyeux noel Andris .. vivement la prochaine vidéo
Mill is Looking great! We have a woodmizer sure are handy , Keep up on the Projects
Merry Christmas Ants! To your family as well as everyone watching!
Wishing you super mum and family a very happy Christmas and new year 🏴🇬🇧
Thank you for sharing, it is a great time for watching your project before a party of christmas trees , have a great time 👍👍👍👍
Your channel is my favorite. Seriously I watch alot of building channels. You are the Rock Star of I can make that shit happen, guy.
I'm 63 I know alittle, I appreciate perfection as best as possible. Cheers
a rock star? little old me? :D your too kind sir
Merry Christmas Ants Pants ❤. Thank you for all the great videos!
0:43. Wow Ants be shoveling fast. Cold as crap out there man. Moving at lightspeed there.😊
lol
Merry Christmas to you and the Family may your home be filled with lots of Love and Laughter during the festive season 🧑🎄🎄❤️🇨🇦
Nice install and first run at the New location
That paint was something else!
Enjoyed your videos all year lone. Looking forward to seeing more videos in the new year. Merry Christmas to you and your family.
I asked Santa Clause to bring you several pairs of really good knee pads. You do not to want to injure your knee caps while you are young. Merry Christmas and Happy New Year... You are still my HERO.
Andris Merry Christmas to you and the Superfamily. You make the channel absolutely fantastic..thanks for all the video presents this year it is greatly appreciated !!❤ brother from an American human!!
Was a little surprised that paint didn't stick at all. Merry Christmas Adris and family
Don't buy cheap paint lol
Merry Christmas and thank you for your hard work entertaining all of us! 🎅🎄🎁
Christmas greetings to you and your family. Thank you for the video
Merry Christmas to you and your family, appreciate the hard work and all the videos.👍🏻
You have remarkable skill sets. Thank you for sharing your journey. Blessings.
Merry Christmas and happy New Year to everyone from Minnesota in the USA
Super sisters kitchen need some rug! Rug will really tie the room together!
Just watching your video on Christmas eve, chilling and after.having time with family, merry Christmas 🎅 🎄 to you and your family x
14:30 I would think outside the box and make it so that the end wall could be opened and the rails extended to accept the rare case of looong morning wood. It would involve some extra leveling work for the parts that extend out of the shed. The wall should have a door or some kind of closable opening, large enough for the sawmill to pass through.
i consider this video as an amazing Christmas present!!!Merry Christmas Andris!!!
I thought his trailer mods were perfect and was so surprised when they didn't work. Looking forward to seeing how he solves the issues.
you should go for a Rob Halford look
Merry Christmas Andris, best wishes to your mum, and the rest of your family, take care. PS, just mill planks for the walkway on the saw mill. Make it like a woodshed floor, strips of timber about 35 mm wide with 10 mm gaps for the sawdust to fall through.
Thanks for the entertainment all year! can I get some of that paint? Perfect for April fools day!
Merry Christmas, thanks for the Christmas present!
Excelente trabalho muito obrigado
Thanks for all you do! Happy holidays!
Snowy, init? 🦌
Merry Christmas! I'm glad the sawmill is back in operation. Now you can light the Christmas tree 😊
Might want to throw some quickie wooden ramps together for parking equipment on to keep the running gear from freezing to the ground??
i will park it on concrete soon
You could look at the GRP version of the grid flooring. Generally cheaper than steel or Aluminium options.
What an awesome Xmas gift from you. Yo, ho, ho. Joe.
Outstanding surprise and it works like a champ.
Merry Christmas Ants! Enjoyed your video as always!
Frohe Weihnachten Andris! Thanks for Show as always!
And merry Christmas for you All aswell 😊
Even your carport is in a festive mood, giving you your screwdriver back for Christmas!
Merry Christmas and all the best for the new year and all your upcoming projects!
I have a huge spruce log that needs cutting. But first I need to get it out of the forest. Too good to leave just to rot or make firewood out it. But first finish the the Sawmill shed and then I can supply you with quality material. Happy Christmas.
Came together really well.
Merry Christmas Ants! Thank you for yet another video.
For the carport beams sagging, instead of posts you can put triangular trusses in the roof space to effectively hang the beams from the trusses instead of propping up from below.
Yes I'm glad to see it's white there finally
Merry Christmas and a Happy New Year to you and your family.. Best wishes from Colorado USA.. 😎🇺🇲
Hope you and your family have a wonderful Christmas and play in all that white stuff y'all have 👍👍
Thank you for sharing!
best present ever dear sir, enjoy your x-mas
🎄 Merry Christmas 🎄
Happy holidays!
*- Nice Christmas Eve video. Thanks, Andris*
*- Merry Christmas and Happy Holidays to you and yours.*
Happy holidays!
Never leave tape rolls laying down in the shop, or let anything lay anywhere near them. Not even in a box or drawer. As soon as there is a dent or anything on the edge, it'll rip apart right there every time you want a piece. :)
Merry Xmas everyone, especially Andris and super family, have a great Xmas and a wonderful new year
Wow! Holy crap man!! Great Christmas presents Ants!! Spend my Christmas eve watching a Ants Pants video!! Wonderful Christmas!!! Thank you Mr. Pants and Merry Christmas to you and the super family!!!!
It's nice to see the sawmill in its new home and operational.
Maybe the cheapest paint isn't always the best choice. 😂
Merry Christmas Ants. Keep on going with the projects next year.🎉
Ants, Merry Christmas you and your family! This video was super suprise.I was watching just your many years old video (renovating main house). thanx again, keep going and take care of yourself.
Have you tried flux core welding? Save you a lot on gas and you don't have to drag the bottle around. Swap back over when you want pretty welds.
yeh i have some flux around, haven't had good welds from that though, maybe the wire is poor quality
Merry Christmas 🎄⛄ and a Happy New year 🎊.
Another great video, and Merry Christmas!
You may want to consider adding jamb nuts to the bed adjuster feet
Unfortunately, you already welded a washer to one side and a nut to the other ... but nothing the grinder cant fix lol
Just a suggestion, but I imagine there will be quite a lot of vibration between the saw running and dropping logs on the bed. Would just hate for the bed to be constantly "adjusting" itself out of level since there isn't a jamb nut on each adjuster
Regardless, thanks for another awesome video!
Edit:
Just made it to the part where you anchor the bed to the slab. Perhaps that makes the jamb nuts unnecessary! Would still hate to see those legs constantly loosening off, but maybe it doesn't matter now with the anchors 😀
I’m just going to throw this out there Mr. Pants. You seem to do things the hard way instead of the smart way but you’re very entertaining and a lot of fun to watch. You definitely have to be the hardest working TH-camr out there and I can’t wait for the next one. Merry Christmas and Happy New Year!
Great job Andris. Very impressed with your saw mill. I'm jealous! Was wondering if you had thought of putting a collection bag or something on the saw dust spout? That way you wouldn't have a bunch of sawdust on the ground to deal with and you could use what you collect in the bags for various purposes. Merry Christmas!
planning to put a concrete pad where all the sawdust will fly, then i can scoop it up with the bobcat
Merry Christmas to you and yours, Andris.
God Bless.
Merry Christmas from Ireland to you and your family
Merry Christmas from Australia 🦘
Nice Christmas gift to us all 😁
Happy Christmas! Thanks for another great video. Cheers 🇦🇺
merry Christmas, from Derbyshire UK 🎄
best Christmas present easily.. really nice
Kalėdų senelis ('Christmas Grandfather'). Linksmų Kalėdų, Dimitrijau. Merry Christmas! Linksmų šventų Kalėdų! And a very Merry Christmas to you all. Mr Ants, Pants
Very nice.
Merry Santamas!
you too
I think if ever need to adjust that, maybe u can loose that anchor plate bolt maybe.. idk ..
Merry Christmas 🎄
Merry Christmas and Happy New Year To you and your family
Small thing that I thought I’d point out, Andris: one of your center supports is open to rain at the top, but has no exit for it at the bottom. This won’t immediately be a problem, but over time it will rust out the inside of the metal tube. Otherwise, great build!
Have a great Christmas you and your family
Merry Christmas Ants! to you & your family see you next year
Regards
Steve UK London
thank you for your videos, i really love watching them. Merry Christmas!
In the US we have a sheet called expanded metal. It's basically little triangle shapes in the sheet metal. 4 ft x 8 ft sheet. Relatively inexpensive. You could see if Estonia has anything similar. Then all you would need to do is make a frame of metal to sit half a sheet on.
Merry Christmas Ants
Add you a push handle on the right hand side of your mill so that you can walk on the concrete
My man. Sneaking in with a little Xmas present for us all. Love it! True legend who puts his viewers first. Have a great Xmas Ant and Super Fam x
We used to throw a tarp over frozen equipment and put a propane heater under it. Just about any heater will work. I've even seen guys put oil/diesel in a metal bucket and light it.
Marry Xmas Andries
Thanks for the Christmas present, I’ll be watching it tomorrow
Best wishes to you and your family 🤙
Excellent progress
Another awesome job! Merry Christmas!
Merry Christmas from fl.
Happy holidays!
a nice surprise to see an Ants Pants video today.. thank you and Merry Christmas.
What a treat a video up before Friday. Very nice Christmas present.
Thank you for all the videos. You made the sure they're all great. Love your sense of humor learning a few swear words in astonia. LOL. Merry Christmas to you and your super.Mom super sister supersanta Claus.Anybody else that's there merry christmas