Beautiful car, love the color. I have an 81 just pulled my fresh stout running 327 out because it won't hang with them stroker motors with roller cams and pro 1 heads etc. Got a stroker going in it today. Your car sounds and looks awesome, thanks for the vid
I am making 500 ft pounds and 500 HP with my 388 stroker. I have pro comp heads almost 600 lift cam and a air gap intake with 10.5 comp ratio. I have the dyno sheet to prove it and videos of the engine on here. I have not run the car yet, the 15 sec runs are before I rebuilt the engine.
Eagle crank n rods trw forged pistons, pete jackson gear drive, comp cams gold rockers 1.6 stud girdles, super comp headers,vicror jr. Port matched manifold tp heads, runnin 112 vp race gas, now have a powerglide in car 5200 converter with transbrrak and 1.86 first gear also 4.30 gears out back will post time slip this summer
k bro think what you want its all good but ya the intake is a victor jr. motor made 538hp on dyno can post the dyno sheet if you would like me to, but thaks for the comment
mr85gbody hasn't been around to long because just looking at the limited view of the engine bay you can see 500+ worth of stuff under the hood but what r u running as far as exaust I love the sound
will be putting another video on here in a couple weeks.. working on some qa1 shocks, global west upper n lower control arms,willwood brake kit, and some outher shit!! this video was weak if you ask me but the next one will be some tire burning full throttle shit so get read!!!!
if youre not new to this then you should know that people are making 550 hp with DUAL PLANE intakes .. let alone a ported hurricane, super vic, or brodix hv1000 .. mr. expert
You're running racing fuel? Or premium? Also what Carb do you have in there? Is it a full Roller motor? Hard to tell over the internet but that thing doesn't sound like it's over 500 HP.
Mr 85gbody is dummern hell I run a power plus hurricane on my 355 that's a solid roller with dart 230cc heads an forged rotating aselmbly an made 563hp an tried dual plane ..I had to have it milled an ported also an it made 524 so yeah mrs body that says how much you know
Not trying to down talk you or anything, and I've only built 2 small blocks in my limited experience. It seems like your torque would be shit with that setup, that's got to be pushing 11:1 compression out of that 355 I'm guessing? Fuel cell? I just haven't heard of many 355's pushing those numbers, hell the 383's I've seen that hit 500 usually push 10.5:1 with ridiculous cams and even then their torque curves are shit.
U can't judge HP by sound, y would a guy lie about HP?learn something new err day.I hate them big ol heavy oil motors lsx is the best bang 4 ur buck nowadayz u may be pushing 360 HP dude
Lol too many haters on TH-cam smh... That malibu is a beast. Great car.
Just getting my 78 back on the road after 20 years. Ps your car is awesome. Inspired me. ❤
don't know why but I love these Malibu's
Open headers? I bet the neighbors love that lol 😎 beautiful car!
open headers the only way to go
+Hunter da G
No way Jose! Open headers sound like dookie, no cats with hi flow mufflers sound sweeeeeeeeeeeeet!
Beautiful car, love the color. I have an 81 just pulled my fresh stout running 327 out because it won't hang with them stroker motors with roller cams and pro 1 heads etc. Got a stroker going in it today. Your car sounds and looks awesome, thanks for the vid
My main concern is the sasquatch in the back ground growling making the baby cry.
😆😆😆😆😆😆😆
I am making 500 ft pounds and 500 HP with my 388 stroker. I have pro comp heads almost 600 lift cam and a air gap intake with 10.5 comp ratio. I have the dyno sheet to prove it and videos of the engine on here. I have not run the car yet, the 15 sec runs are before I rebuilt the engine.
TheSquidgy04
Any way you can send me the build sheet if I pay you for it is love that motor under my k20 for pulling
My car scares adults in the parking lot & sets off alarms.... Love the Malibu build.
Listen how he says "John" He could be the smoking Terminator
Heavy breather...Damn, is he ok!?
Lol, dude sounds like Darth Vader
Darth vader behind the cam :)
Miss my old 78 Malibu SS
Eagle crank n rods trw forged pistons, pete jackson gear drive, comp cams gold rockers 1.6 stud girdles, super comp headers,vicror jr. Port matched manifold tp heads, runnin 112 vp race gas, now have a powerglide in car 5200 converter with transbrrak and 1.86 first gear also 4.30 gears out back will post time slip this summer
nice malibu, I love those
ya bro i like your 80 gotta love the malibu
Beautiful car and sound
Did the sound of the V8 scare that kid thats crying lol
it was open headers probably hurt her ears
k bro think what you want its all good but ya the intake is a victor jr. motor made 538hp on dyno can post the dyno sheet if you would like me to, but thaks for the comment
Thanx man. Its got a th350 and not sure on the gears yet but i think 391 its a crysler rearend, mosor axles ect.
Anything can sound like “bad news” with open headers 😂😂
Don't be a bitch
@@dutchvanderlinde658 I want vengeance Dutch.....you know what I’m talking about
I havent any idea what u mean uncle, BTW, how's Arthur? 🤔
@@dutchvanderlinde658 he’s dead Dutch... you know exactly what I’m talking about
@@CarsAndChrist385 Nuh Uh I was in Tahiti for a photo shoot when I heard something happened, what happened to Arthur? Also how is my buddy Micah doing
hella set up sounds BEASSSTTT!!!!
actually lookin for a setup like this for my malibu lol sick ride bro
Nice an you got her ready I'm going to build me something one day
What a the torque on that
nice i like that
Sound like the camera guy had a few to many cigs in his time
ya man open headers.. they are 1 5/8 headers but plan on putting 1 3/4 here soon so i will see all 500 hp
dude breaths hard
Love the color
I have a, 1980 4dr with 267....Imagine my dreams.
Old Fokker yours has 2 to many thing lol jk
Nice car what mufflers
mr85gbody hasn't been around to long because just looking at the limited view of the engine bay you can see 500+ worth of stuff under the hood but what r u running as far as exaust I love the sound
I kept waiting for him to say"it's puts the lotion on it's face".
Bad ass!!!!
thanks
Whats up with the camera guy he's breathing louder than the car
Cam specs 576 582 lift 248 254 @.50 110 lobe seperation solid roller, dart pro 1 200 runners
hell ya thanks hoodrich! have you ever had your motor dynod?
Popcorn ready yet !!!!!
sick ride bro ...what kind of transmision and what gear u got in the rear end??
will be putting another video on here in a couple weeks.. working on some qa1 shocks, global west upper n lower control arms,willwood brake kit, and some outher shit!! this video was weak if you ask me but the next one will be some tire burning full throttle shit so get read!!!!
thats whatsup thanx for the info ....
man that bitch sounds good that cam sounds good great job man
is that a custom built motor :O
motor was only at 110 temp and quarter throttle cuz neighbors were outside! lol
what the hell are you talking about that's a high rise intake the guys here in town are makeing 500+ hp with those intakes on the dirt mods
What size dart pro 1's did you use
so i got 1 dislike.. how could ya not like this clean malibu!!
Can I buy the build sheet I'd love this in my truck for pulling
355ci... 11:1 compresion... 500hp...... NOT....LOL
A 355? I bet that thing can turn over 7000 rpm EASY
Open headers and high compression??
if youre not new to this then you should know that people are making 550 hp with DUAL PLANE intakes .. let alone a ported hurricane, super vic, or brodix hv1000 .. mr. expert
Good motorsss
Hi whet Name muffler exhaust
Roller Cam
how often do you have to lash the valves?
Roller cam ??? What's the lift
Pump gas?
What size roller cam is in the car
what kind of race seats are those?
hey look its tupac driving.
What color is on that man?
You're running racing fuel? Or premium? Also what Carb do you have in there? Is it a full Roller motor? Hard to tell over the internet but that thing doesn't sound like it's over 500 HP.
Sounds like a guy is snoring in the background
got specs or a part number for that cam?
Mr 85gbody is dummern hell I run a power plus hurricane on my 355 that's a solid roller with dart 230cc heads an forged rotating aselmbly an made 563hp an tried dual plane ..I had to have it milled an ported also an it made 524 so yeah mrs body that says how much you know
Nick Coots what carb were you running and the cfm,and cam specs?
Cam specs??
What size head gasket u have
Not trying to down talk you or anything, and I've only built 2 small blocks in my limited experience. It seems like your torque would be shit with that setup, that's got to be pushing 11:1 compression out of that 355 I'm guessing? Fuel cell? I just haven't heard of many 355's pushing those numbers, hell the 383's I've seen that hit 500 usually push 10.5:1 with ridiculous cams and even then their torque curves are shit.
Don't know much about sbc engines do ya.
😂😂😂
What paint code ?
what brand/size cam
whats your lobe separation
Divorced
Sounds more like a flat tappet when in gear
What does it take to get a 355 to make that much hp
lo3435 MONEY
Nice cam, good intake, good carbs, and a very nice set of heads. Probably some high compression and some nice headers too
The blood from baby seals.
Cam specs
nice car man i have an 80 myself has a 355 sb 550 hp check my videos when you get a chance
Lol put a muzzle on the screaming kid!
Sounds nast af
0:25
Yes race gas 850 qft carb
why would you build a small engine?
Barbe Sarachman cheap and easy to build up
I WANT ACTION!! if thats 500 hp..........
Never mind lol
oh every month or so
That thing is nasty....
U can't judge HP by sound, y would a guy lie about HP?learn something new err day.I hate them big ol heavy oil motors lsx is the best bang 4 ur buck nowadayz u may be pushing 360 HP dude
Your a fuckin idiot.
this car is slow
Still faster than your brain
Pump gas?