Maintenance Of Way Parade! What Is This Stuff?! Awesome Powerful Railroad Machines!
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Railroad maintenance of way parade! Endless line of track maintenance equipment. What does this stuff do? CSX main line in Latonia area of Covington, Kentucky. Shown going both ways across Grant Ct level railway crossing. Track work was being done in the Wilder Kentucky area. Cincinnati is just across the Ohio River from here. Also, see my previous video of the high rail truck that derailed at the crossing. Filmed May 2, 2019AD. Thanks for watching! Please comment, rate and Subscribe To JawTooth!!
Please Watch Another JawTooth Video!
Angry Engineer Blasts Horn In Quiet Zone! • Angry Engineer Blasts ...
Train Stopped For Ice Cream! • Conductor Stops Train ...
Train Crew Flips Off Railfan! • Railroad Conductor Fli...
![เปิดใจ พี่ญา คนรุม หลังทัวร์ลง หนักสุดในชีวิต!! l [Nickynachat]](http://i.ytimg.com/vi/2-OJZRtclro/mqdefault.jpg)
On Tuesday, I am flying out to Ogden Utah to film the Big Boy steam locomotive and chase it for a week.
I'm new to train filming, if you want to check my channel
cool
Way cool.
Jaw Tooth On Wednesday I'm flying out to Salt Lake City and staying in the Ogden-Salt Lake area until Saturday at 3am we leave on an Amtrak train!!
Cool have fun out there jaw tooth Utah is nice lived out there for 5 years, can't wait for ya to film big boy :)
replacing rail, I saw spike pullers, spike drivers, loose spike picker uppers (big magnetic drum) , the one with the big white tanks was a rail heater, those tanks are propane, the box truck has a rail welding robot in it, the cranes had rail guide rollers. one with the crawler tracks had tanks for epoxy they fill in spike holes in the ties.
nice explanation. were they lifting old rail and laying new rail>
That's all fine and dandy but where are the clowns??🎶 There has to be clowns🎶! Lol..
Chemetron truck - electric flash butt welder, clamps on the rail,heats it to melts rail ends then forges it together. Steel gang putting in ribbon rail.
Now this makes better sense than my effort - thanks to focus frenzy! I didn't think of the rail heater (makes sense, though it could be confused, like I did, with a grinder; the epoxy one makes sense - I would imagine that they would use the epoxy made by Willamette Valley - their epoxy has to used up or it will go off, so they have two tanks of each of the two components and mix as required and inject straight in to the holes. It sure saves tie replacements.
I'm sorry but watching that parade of maintenance of way equipment was as exciting as watching paint dry sooner watch highballing freight yard work keep up the good videos
I love these MOW vehicles. They give a cartoony like feel to the railroad. This whole flotilla or parade of them is so epic and adorable at the same time!
All they need is the Disney Electrical Parade soundtrack. LOL!
All that horn honking in that parade made me think the equipment should have been decorated, have kids throwing candy to the audience, and the Miss Jawtooth Festival queen and her court doing the royal wave.
The fact that one or more of the pieces of MOW equipment has a siren and a bullhorn on it is even more bizarre! 😂😂
The white truck is full with food for the workers😋😜
No that is a track inspection truck
It's a rail relay and replacement gang. The crew removes old rail and installs new rails on the track. The large off-road crane you saw in the beginning picks up the old rail and tie plates and moves it off to the side. Another big crane identical to it places the new rail onto new tie plates. The machines pull the spikes, another machine carrying heater tanks heat the rail to its maximum heat resistance and it's installed. A van carrying welding equipment and a large welder fuses the end of the rails together.
Steel gang, spikers, anchor boxer, rail heater, contractor flash butt welder, couple of hydraulic cranes, cribber/adzer, spike puller, anchor knocker, scrap crane
There needs to be train simulator mods for this
Yes! The other way! Good job! In reverse I noted a Progress Rail (contractor) logo on the back of the Chemetron (welding products) Box truck.What a show! CSX proving they can engineer stranger things than they inherited.
That first house has a great view... kick back with an iced tea and watch the trains go by. I'd retire well in that house.
As CSX is pulling heavier consists, trackage is needing constant work. Trains twice as long with multiple DPU power running at higher speeds is all about profit.
Very cool! Just saw the rail grinder come thru Friday! Loved the siren!
I saw two Loram rail grinders at work this past Thursday in Pittsfield MA.
I recognised some of these. They deal with track placement, track scanning (I saw what looked like a rail ultrasound machine), spike pullers and sleeper/tie levelling. Looks like they're preparing to fix a stretch of line, hopefully one of the abandoned/disused ones. Very exciting. :)
Awesome powerful railroad machines? looked like support machines, Worked at Maintenance Manufacture for 30 years now. mk4's, 6700's, 3300, Magnum rail grinders, and stoneblowers. Will be losing my job due to re-organization. Good Luck South Carolina- you will need it!!!!
Never would have thought i would say "This Needs Clowns"
can I have a balloon? 🎈🎈🎈🎈🎈🎈🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🤡🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈🎈
Needs some cowbell, too.
I'm sure that some of the guys riding inside the machines feel like clowns with all the horn-honking that they have to do sometimes.
And they go hult dut duttta dutta dut dut dutta dut da dun dut duddle dut dut dutta dut dut da dutta dut dut da dutta dut.
That guy up on the porch liked it too
They had the perfect place for a railfan
Whoever labeled this parade picked the right word... That was interesting!!!! I should have counted them.. THANKS !!!!!!!!!!!
Gotta love how there's just a regular backhoe loader in there, just with a precise driver
Thanks for watching!
@@GaryCameron780 Look again... but more carefully. It's difficult to see the ones for the rear, but the front track wheels are clearly visible.
@@DonVideoGuy007 , there are no rear hi-rail wheels. the rubber tires are sufficiently wide. the front hi-rail wheels are welded to the bottom of the front bucket.
Hi ho, hi ho, it's off to work we go....
I've been working on the rail road all the live long day....
I worked for Norfolk Southern MOW before and we had All the same equipment except orange lol God I miss that king of work
Super to see Brian.just like a parade.thanks. Whe have here Switelsky Plasser en Treuer. because whe are using concrete layers for the rails,no wood.
Wow...great catch...like watching the circus parade.
The Case loader tractor looked like he has rail guides on the bucket, but none on the rear. That is why he had to turn around and only go forward. The rear wheels are wide enough to stay on the rails.
Just think in the olden days before these railroad equipments were made, railroad men had work on the railroad the hard way, with their bare hands.
Only thing missing from the MofW Parade is the marching band!
All those vehicles to replace the rails. Wow. What an operation
Wow Jawtooth! I really love this! Nice catch! It definitely does look like a CSX parade. Some interesting equipment for maintaining the rails!!
You weren’t kidding! That’s a whole parade of MOW
An even bigger machine convoy came through my town this week. Huge machines!
CSX knows how to put on a parade! Great catch
Well that was incredibly weird!!! Great video-like Shriners on their way to a party somewhere.
its the wacky races in rail form
As always Brian -right person in the right place at the right time !!! What a parade dude -love the little drawbar trailers with tools and jackets on ! Some of them like their horn ! You promised a MOW video -as always you havent dissapointed! Some of the machines do look odd - but they've all got a job -gone have some of the back breakers -replaced with " a never complain" machine ! You are one busy man Brian ! Loving it !
I love that Neighborhood! Make.it a Bell only crossing!
Lovely maintenance in the way!!!!!!!
I noticed that white bobtail truck said Progress Rail. I worked there as a quality auditor and system analyst a few years ago.
One machine pulls the spikes, one machine pulls the ties, one machine inserts the new ties, and one machine replaces the spikes. The rest is for making lunch.
I think the 4th rig had a large ice chest full of beer... for when they are finished, of course ;)
That's cool. I live near CSX, and the most I see is a couple pickups and regular maintenance.
Nice video Brian, I have no clue what I just saw, I felt like I was watching monsters inc of the railroads or something. I enjoid the parade. pass the hotdogs.
I love a parade
Thanks for watching!
CSX recently performed maintenance on the tracks where I live and we had lots of those vehicles around.
They did a great job repaving our crossing but not so much the crossings on the hwy.
Wow I've never seen any thingn like them, they almost looked like a child's toy, how cute! So fascenating, I saw where some one said what they are and what they do. Too cool!
Everybody loves a parade ! I like the old mechanical bell on the crossing. I also like that a lot of crossing systems in the US only have the bell clanging while the gates are in motion, and after the gates are down, the bell shuts up. In Canada, the bell has to keep droning on and on and on. It's always appreciated when there's a train broken down, or worse, if the crossing protection somehow malfunctions, keeping the crossing constantly activated. The e-bell can be a little less "piercing" than the mechanical snap of the clapper striking a real bell, but after two of them have been droning on for a few hours non-stop, it drives a person about batty. I've wanted to shimmy up the pole a stuff a towel in the speaker or wrap duct tape around it to muffle the sound down a bit. I'm close to a set of mainline tracks for 2 railroads, and they are a shared crossing, so if one activates, they both activate to prevent cars from lining up back far enough to be sitting on top of the other tracks, in case another train should come along. We have lots of brain-dead people up here (just like any other country), who figure that paying attention to their phone while they're stopped is more important than taking note of where their vehicle has come to rest.
Its like they headed out to work, then said never mind.
every piece of equipment looks different from the next!! come on boys....tighten it up!!
Thank you very much for sharing my uncle was an engineer on the railroad been a long time since I've been around trains love to watch keep sharing :-)
A bunch of shriners sold their Mustangs and bought these.
James Christensen 😂🤣
Now that is funny LMAO
Wow JT. Another fine video!!! I saw everything in that parade except the float carrying the MOW queen, waving to the crowd, lol
This’s a most amazing parade'
0:59 that crane sounded a bit like a fire engine.
I like the siren on it
Damn! These guys are fast! No sononer hit the work spot then they are on their way back home to get a beer or 10.
Awesome video, Ive always loved watching the maintenance of way equipment going behind my house. Im lucky enough to live next to the Canadian Pacific Mainline. Thats why l love this video. Ive actually seen equipment like this in behind my house, replacing ties and spikes, very cool to watch
Do you mean to tell me they didnt have one seat for the Jaw Tooth?
Sad. Great action today. Thank you
Thank you!
Rail gang loaded up and headed out to replace ribbon rail. Thermite welder was in the box truck.
Cool
Terex a proud workers of CSX
That one flasher malfunctioned; kept going off.
Looks like they're on their way to dig a tunnel.
I Love A Parade!! Da da da da done done da da daaaa
Thanks for watching!
let the parade roll sun.
Thanks for yet another great video! This is right close to my neighborhood!
Thank you!
Awesome! Love your vids man, Keep it up!
Thank you !
Hi! Great parade! Like # 635. Good luck!
they knew you was there ,lol
That is some really weird and strange vehicles. In the UK they use a giant track machine that is about 300ft long.
May 6, 2019----Awesome man, awesome. Thanks for the video as I hope to use some of the equipment in a 1/35th scale zombie/apocalypse diorama. Will find more photos of the equipment and hopefully drawings of them. Want to get into 3D printing, using the Anycubic Photon resin printer which I'll be buying in the next few months along with trying to learn how to use CAD. At 66, it ain't easy for this old dog to learn new tricks.Retired now, but many years ago used to drive truck all over the U.S. Was going to take a break because I was tired, then saw a bunch of stuff like this equipment about half a mile away. It had been there awhile and many pieces were rusty. Took a bunch of photos even though never had an interest in trains other than looking at everyone's layouts. Have downloaded 400+ photos of abandoned locomotives, boxcars, train depots, etc. for future zombie/apocalypse dioramas. There is a 1/35th scale model kit of that front loader available. Be interesting to modify it for railroad use. There's a BIG rail yard in Sparks, Nevada and will see if I can shoot (photograph) any equipment that may be there now.
I know I am a bit late to this, but I have a full video of rail being replaced by a curve gang from Union Pacific. I did my best to detail each machines job as it does the work. (My video is even a bit dated and a lot of the machines filmed are rarely used, I may try and make an updated one at some point) Good stuff from you though Jaw Tooth, way to show some appreciation for some very under appreciated folks!
I have said this before and I will say it again I LOVE your videos Jaw Tooth! I also love the little maintenance vehicle at 5:50
That was entirely too cool! Those folks in the yellow house have a great ringside seat!
You could have used the theme from " Peabody's Improvable History " from " The Bullwinkle Show " as background music!
What!? They got police sirens?
My favorite type of job!
That thing's horn sounds like a synthesizer playing a chord.
It makes you wonder what the railroad company is doing sometimes when you see these crazy things on the track
I love a good parade.
Each of this machines has a job and what they do is they fix the rails
They must at the end went back to the yard
The only thing this parade is missing is more cowbell!
Wow, I could only identify a few of those, but since someone has already done that, won't repeat that here. But when they re-did the tracks at Winter Park they didn't have close to even half of what you caught in that MoW paraded. Cool catch. Good luck and have fun chasing that old steamer!
Bonsoir Jaw la suite de la vidéo d'hier-soir pour les travaux de maintenance de CSX impressionnant convoi de véhicules de voiries grues camion machine a ballast etc... Le tout dans un grand concert de klaxon ouahouu !!! super Jaw à bientôt et bonnes ballades @ +
Quite an assortment.
With a few of those horns all you missing is the clown music.
Great video
I half expected to see Dick Dastardly and Muttley following that lot!!!
Surprised the gates went down
Wow cool parade , (yawn) I couldn't stand the excitement of them going the other way . Cool video & very interesting equipment
I've seen most of these machines in use in another much older MOW video of CSX in action. But ... It appears that CSX has upgraded a lot of their machines, and along with the fact that they are folded up for travelling, it makes ID'ing them a little difficult. I have compiled a list of machines versus time, but most of it is either obvious, or 'I don't know', so I will not bore you guys/gals with posting it. But if you are interested ...
Jaw Tooth you caught so much MOW equipment in this video you should go around to their head office and apply for the position of official railfan liaison or whatever they call it! They'd probably call it something official! You would get training in railroad safety operations as a bonus! :D
I wish the MOW crew would come more often
Pretty darn cool video. That’s something not seen everyday. A lot of machines. I’ve been watching videos of Big Boy 4014. Ginormous is not the word to describe that locomotive!
Thanks for the video. Have a great time out west chasing that GREAT Steam Locomotive.
Great video Brian!!!
My favorite has to be the Terex hi rail crane
He said “you’re gonna derail yourself idiot on the radio” 😂😂
Have fun can’t wait to see the videos
Thanks!
Really nice find. Not sure what most of these machine are for. Maybe they are replacing crossing tracks ?
It looks like they have a hot asphalt machine
It was a parade! Everything except for marching bands and dancing horses!
They should do a Christmas parade!
They ought to string some strands of Christmas or patio lights on the vehicles to make it look more like a REAL parade!
That backhoe only had bucket wheels holding it on the rails!!!!!......???????
I’ve never seen one of these parades before 😆 but great catch 👍