They are brilliant those bks, I've got the 467 tester and every time its brought dead tubes back from the dead, i zapped my 25" sf2 cab 3 years ago from looking like this tube in the video and 3 years on the tube still reads way up jn the green and i use the machine for a quick game nearly every day, those rejuvenation machines are worth thier weight in gold. I've just zaped my daughter much loved 14" disney princess tv as the picture was loosing red after 5 mins it wasnt reading anything on emissions hardly surprising this tvs on nearly day and night and has been for 6 years shes loves this tv so hopefully it will go on for a few more years before i put another tube in it.
Just got an Area 51/Max force cabinet that is having trouble with the light gun tracking. Seller said it needed a Rejuv and all my friends are saying its too dim. Trying to do as much research as I can to DIY without zapping myself XD
Interesting that you set your G1 to 35. I was always taught to never go above the first increment. At least that's what the instruction card said when I worked at Namco.
G1 per the bk manual says 50vs and G2 it says to set it to first increment past 0, I tried a weak 7400 and did it the manuals way and i didnt get good results it got a little worse i think which could of just been the tube being too far gone but i think im going to try mikes setting for a weak u5000, i feel like the manuals way is too much they want you to press and hold it when you do full rejuvenate unit it bounces down a sec goes back up and then release when it goes down to red, but i think its a bit too much and hits it too hard that way Update:Tried Mikes method on the tube i already tried bk manual way and got great results, tube looks great highly recommend doing Mikes method for arcade monitors at least
Curious about the heater voltage step shouldn't you be getting 6.3v regardless within the 4-7 voltage range? On the B&K testers there is a field calibration stated where you can check the heater output voltage with a multi meter and then use a trimmer pot on the main board to trim it up or down if needed. I suppose it may be a moot point though if your actual heater voltage is still 6.3v on the output.
Wow...This guy is amazing..And he has a heart of gold and helps out everyone.
Tube didn't Pop but Mike did! Looking forward to Polo's
I have a Sencore cr70, and I never know how long to hold the rejuv button for. This video helped out, I appreciate it.
Love the enthusiasm when the blue goes off the charts ^^.
Holy shit ! Phenomenal rejuvenation sir ! Damn !
Love these videos, very entertaining! Thanks Mike :)
I love seeing results like this after a rejuve process!
Holy shit my dude!!! I've seen you rejuvenate tubes before with good results but WOW, this one is UNREAL!!!
They are brilliant those bks, I've got the 467 tester and every time its brought dead tubes back from the dead, i zapped my 25" sf2 cab 3 years ago from looking like this tube in the video and 3 years on the tube still reads way up jn the green and i use the machine for a quick game nearly every day, those rejuvenation machines are worth thier weight in gold.
I've just zaped my daughter much loved 14" disney princess tv as the picture was loosing red after 5 mins it wasnt reading anything on emissions hardly surprising this tvs on nearly day and night and has been for 6 years shes loves this tv so hopefully it will go on for a few more years before i put another tube in it.
Just got an Area 51/Max force cabinet that is having trouble with the light gun tracking. Seller said it needed a Rejuv and all my friends are saying its too dim. Trying to do as much research as I can to DIY without zapping myself XD
Yeah, I have never seen anything like this. This was awesome, I was excited for you!
I have that chassis and was looking for a
Good video on a rejuvenator
Holy shit, what a great result!!!! Great vid!
Wow! What an amazing difference!!
Best Rejuve I've ever seen. Nice!
Even if this were to only last a few weeks, that's a few weeks more with a usable picture, Lovely Stuff.
Love the content!!
Interesting that you set your G1 to 35. I was always taught to never go above the first increment. At least that's what the instruction card said when I worked at Namco.
Yeah. Like I said, these settings are what I’ve had the most success with. Thanks.
G1 per the bk manual says 50vs and G2 it says to set it to first increment past 0, I tried a weak 7400 and did it the manuals way and i didnt get good results it got a little worse i think which could of just been the tube being too far gone but i think im going to try mikes setting for a weak u5000, i feel like the manuals way is too much they want you to press and hold it when you do full rejuvenate unit it bounces down a sec goes back up and then release when it goes down to red, but i think its a bit too much and hits it too hard that way
Update:Tried Mikes method on the tube i already tried bk manual way and got great results, tube looks great highly recommend doing Mikes method for arcade monitors at least
thank you for sharing your knowledge.
awsome!!
There is a hair by that yellow sticker that moves when the high voltage kicks on. Lol.
The true test will be how it looks in a few weeks. I’d also recommend starting on the less aggressive Clean & Balance option.
True.
Any idea if that tube is still in good shape lol? this video is two years old thinking about trying to find a BK rejuvenator
Honestly, I can’t say. I did this for a friend up in Kansas City.
Curious about the heater voltage step shouldn't you be getting 6.3v regardless within the 4-7 voltage range? On the B&K testers there is a field calibration stated where you can check the heater output voltage with a multi meter and then use a trimmer pot on the main board to trim it up or down if needed. I suppose it may be a moot point though if your actual heater voltage is still 6.3v on the output.
Yes. It’s 6.3 on the output. I tested it. I have to use the higher setting in every tube I shoot that is 6.3. It’s an issue with the rejuvenator.
I don't understand why you set the G2 Cutoff similar to G1! it is clearly specified that the G2 setting must be barely “1”!
Because I'm an amateur.
@@MikesArcadeMonitorRepair dont say this ! i dont think you are.