You, sir, are a frickin' legend - I just bought myself a ton of Virpil gear and would not be able to make head nor tail of it without your magnificent tutorials ... however -- There's one small thing I think you may have missed here .. in (for Example) Elite Dangerous - things like the landing gear and cargo scoop are normally operated up and down by one keystroke.. by using toggle in VPC and then Gremlin to remap them back to the same button that switch now will toggle the gear up and down with one keybinding in Elite. Again though - can't thank you enough.
Any chance you could do some more Joystick Gremlin tutorials (incl. how to best use with HIDGuardian, when and how to fully map to virtual devices, split devices where games can only read a limited amount of inputs from physical devices, etc.)? You stuff on it is by far and away the best on the subject and I know it confuses a lot of people (including me!). Cheers
Could this be a method for XP12/FCU Autopilot Toggle between Selected and Managed Modes for Rotary Switches E1 and É2 (press to latch)? I have Virpil CM3 Throttle E1 and E2 rotaties bound to HDG +/- and SPD +/+ (on a Toliss A321Neo Airbus) but the mode change toggle doesnt seem to work as the presses are not latching I want the 2 buttons E1=61 and E2=64 to be LATCHED Or you you have a better suggestion? Thanks iA. for your advice
Any way to send the command for a longer duration? Trying to use T3 switch in soft toggle for laser arm/safe in the DCS F-18, I see it flicker forward briefly then return to 'safe' when I push the switch to arm.
I wanted to set up my red toggle switches on my control panel #2 so when they were in the left position they would be off and when moved right they would turn on the navigation lights & cockpit lights then when moved back left they would turn off. What mode would I need for the 2 toggles?
Hello there, thanks for all these great vids. I followed this one to the letter and use joystick gremlin as well (I just set up via keyboard keybinds for a long setup but ultimately more simplistic setup). I'm using T4 for my Gear in Elite Dangerous as you have it set here but it only registers approx every 5th or 6th switching. Any ideas?
so I want it to continuously on-on i achieved that but I had to split into 32 virtual devices so hope this helped someone cause it kinda took me some time to figure it out
You, sir, are a frickin' legend - I just bought myself a ton of Virpil gear and would not be able to make head nor tail of it without your magnificent tutorials ... however -- There's one small thing I think you may have missed here .. in (for Example) Elite Dangerous - things like the landing gear and cargo scoop are normally operated up and down by one keystroke.. by using toggle in VPC and then Gremlin to remap them back to the same button that switch now will toggle the gear up and down with one keybinding in Elite.
Again though - can't thank you enough.
Thank you, toggle on is exactly what I was looking for...
Any chance you could do some more Joystick Gremlin tutorials (incl. how to best use with HIDGuardian, when and how to fully map to virtual devices, split devices where games can only read a limited amount of inputs from physical devices, etc.)? You stuff on it is by far and away the best on the subject and I know it confuses a lot of people (including me!). Cheers
Could this be a method for XP12/FCU Autopilot Toggle between Selected and Managed Modes for Rotary Switches E1 and É2 (press to latch)?
I have Virpil CM3 Throttle E1 and E2 rotaties bound to HDG +/- and SPD +/+ (on a Toliss A321Neo Airbus) but the mode change toggle doesnt seem to work as the presses are not latching
I want the 2 buttons E1=61 and E2=64 to be LATCHED
Or you you have a better suggestion?
Thanks iA. for your advice
Any way to send the command for a longer duration? Trying to use T3 switch in soft toggle for laser arm/safe in the DCS F-18, I see it flicker forward briefly then return to 'safe' when I push the switch to arm.
Any idea how to use T5, T6, T7 switches (of VPC CM3) for A10c autopilot 3 way switches? Thanks
I wanted to set up my red toggle switches on my control panel #2 so when they were in the left position they would be off and when moved right they would turn on the navigation lights & cockpit lights then when moved back left they would turn off. What mode would I need for the 2 toggles?
Hello there, thanks for all these great vids. I followed this one to the letter and use joystick gremlin as well (I just set up via keyboard keybinds for a long setup but ultimately more simplistic setup). I'm using T4 for my Gear in Elite Dangerous as you have it set here but it only registers approx every 5th or 6th switching. Any ideas?
2 way toggles are not so good for functions like that
Great video, thks! Do you still regularly use gremlin joystick?
everytime I use my joystick I am using joystick gremlin
Is there a programm for non virpil products ? for example my button box?
Joystick gremlin maybe ?
so...your way is making it an on-off-on momentary toggle?
On-on, I'd say. So up is one button and down is another button. Very useful for things like Master ARM switch.
so I want it to continuously on-on i achieved that but I had to split into 32 virtual devices so hope this helped someone cause it kinda took me some time to figure it out
Continuous on-on, you just use NORMAL button mode for both positions
@@HavocCompanyClan yup it's working now thanks for the vid