20 Kitchen Design Tips In 10 Minutes ⏱️

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 มี.ค. 2024
  • 20 Kitchen Design Tips In 10 Minutes ⏱️
    In this video, I'm sharing 20 kitchen design tips. Lots of info and advice for anyone planning, designing or undergoing a kitchen renovation.
    Please Like, Subscribe and Share this video if you enjoyed it and check out the website for more helpful kitchen design advice. Thanks so much for watching!
    👨‍💻 My Website:
    ➤ www.kitchinsider.com/
    🎬 Videos You May Also Like:
    ➤ • Kitchen Zones | How To...
    ➤ • Subtle Kitchen Design ...
    ➤ • 8+ Ways To Add Texture...
    ⚙️ My TH-cam Gear:
    Camera: Sony A7iii - amzn.to/3tYSU2E
    Wide Lens: Zeiss Batis 18mm- amzn.to/3igZkF4
    Regular Lens: Sony 24-70mm - amzn.to/3wf8pX7
    Mic: RODE VideoMic GO - amzn.to/3qdBTkg
    Tripod: Manfrotto Compact - amzn.to/3wkj3fc
    Lighting - amzn.to/3u60gl5
    Laptop: MacBook Pro M1 2020 - amzn.to/3KPztQT
    👋 FYI: My videos, descriptions, and comments may contain affiliate links! As an Amazon Associate, I earn from qualifying purchases. If you buy something through these links you won’t pay a penny more, but I’ll make a small commission, which helps keep the channel and website going. Thanks!
    Music from #Uppbeat (free for Creators!):
    uppbeat.io/t/richard-smithson...
    License code: 9DQITMKMIUGXYC95
    #kitchendesign #kitchentips #kitchenrenovation

ความคิดเห็น • 80

  • @roderickfemm8799
    @roderickfemm8799 21 วันที่ผ่านมา +5

    Several designs? That would cost a lot of money. Professional designers do charge for their work, after all, whether you end up using the design or not. It's a nice idea, but not practical.

  • @rockshot100

    Mr. Kitch, I have to tell you that you are head and shoulders above every other channel I have seen and I have seen many "kitchen experts".

  • @thetheoryprincess3050

    No fillers. No fluff. Another jam packed video!

  • @neilpickup237

    Concise and to the point.

  • @cirrusclouds8295

    Great video. 10 mins well spent 👍🏻

  • @trinaroe5132

    I’m short so I went around the house looking for something that hit at my wrist bone. I have to say that seems too short to me unless it was to be for kneading dough which I don’t do often. I think the US standard of 36” feels fine to me, even though it hits me about 2” below the bend of my elbow. I think being off on the tall side is probably better than being off on the short side, since the latter is more likely to cause back issues. Loved the little shout out to MTKD on the blocked corner idea.

  • @ps4402
    @ps4402  +8

    So much good advice packed into 10 minutes!

  • @tanyajd7005

    I'm 5'2" tall and I can't imagine finding kitchen counters that hit at my wrist, without going for all specialty ADA cabinets and appliances. Interesting idea, though

  • @angiej4865

    Perfect, thank-you. As I prepare for my house renovation I now double dose on you and your "cornerman" Tobin!

  • @teri-joscott8279

    Wow, speed round of kitchen design. Love it!! I have never before heard of measuring to your wrist bone when standing straight to get the proper countertop height. I've always felt as though my countertops were too high--I prefer to roll things out on my dining table--but according to this method, my countertops need to drop by 3.5 inches (almost 9 cm). Very valuable information to have!! And, a point well made as I want to be in the room where it happens 😉 when any decisions are made for the countertop fabrication or anything, really. As always, thank you Michael for sharing your expertise. Wonderful content.!

  • @jenniferkannapel9450

    Love your videos. ty. PLEASE don't recommend 36" for a kitchen with drawers or doors on even one side of a work space (as shown in your example). That 36" min is only if a passby with nothing that opens into it. No frig, no doors, no drawers.

  • @valeriehancockdesmons833
    @valeriehancockdesmons833 9 ชั่วโมงที่ผ่านมา

    Loved this video! Thank you for all your great tips that I hadn't considered!!!

  • @rusticrye5413

    I hear what you say about drawer units. We have an 18-year old IKEA Faktum kitchen which needs replacement fronts and side panels (currently being made by a company that uses Ikea's original Faktum templates). We'd have liked to convert most of our base units from cupboards to drawers, but the prices were eye-watering! We will be converting one, though, a 30cm wide unit that has always been difficult to use because it's so narrow. That should make the contents much more accessible.

  • @leeannjensen2165
    @leeannjensen2165 7 ชั่วโมงที่ผ่านมา

    I appreciate the information! Thanks

  • @MTKDofficial

    I give this 20 thumbs up and one bonus thumbs up! Great video!!

  • @lauratempestini5719

    Thank you for your good work and thoughtfulness

  • @tamaramartin4015

    Great job, Michael, you made it with time to spare 🙂One thing i'm confused about, and i discovered this by accident (you'd think i would have figured it out much earilier

  • @firstfruitcorban7070
    @firstfruitcorban7070 14 วันที่ผ่านมา

    I really appreciate your TH-cam channel. You are very clear and provide so much value. Thank you

  • @barbaraeaton9266

    I love your videos! I'm glad I'm finally getting them. Great tips as always. 😊

  • @pecanthecat

    great video! so many nuggets in a short time.. thank you! you and Mark are so helpful!!