ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- This should take you about 5 minutes for each extender to fit. However, my new GS has the BMW enduro bash plate , which protrudes forward more so than the standard one , causing the Avant 's high spots to catch on the bash plate, ONLY when its on the centre stand, when turning the bars from side to side. On the side stand, or when riding there is no issue.
Gutted I had to take a Dremel to remove the high spots 😢
Expensive for 2 bits of plastic, but very good quality .
Be aware that certain knobbly tyres may rub against the rear Mudsling, so check on the machine art website or other forums to see if tyres are an issue. My bike has the Michelin Anakee adventure tyres fitted and although clearance is only small, 5 mm at the least, there is no issue with the tyre rubbing, confirmed by riding the bike using all riding modes, preloads etc.
The addition of the 2 items should keep a lot of road muck etc off of the BM
Purchased from Nippy Normans
www.nippynorma...
£189.
Further information Machineart moto
machineartmoto...
3M protective tape via amazon uk:
3M Helicopter Tape 8671HS
I bought both front and rear fender extenders on eBay and fitted them to my new bike today. No issues with fit or rubbing. Total cost £40. Your video was a great help. Thank you
Dude why don't you link to them if they were only £40....thats a HUGE saving
Even cheaper on Aliexpress 😅
I picked up my bike at the end of march, just as winter decided to come back for a week. It broke my heart riding the 25 miles home on wet salty roads but a least it does show where the rear wheel deposits all the road grime and it's a fair way up your calves! I still can't stomach buying the mud sling though 🤣
Nice video again too.
that's why GS ownersare generally older so they can buy those bits 😁
MAM Mudsling is a great product. Has been on my bike for 45,000 kms. Keeps the suspension components clean.
Very methodical workmanship ❤️❤️❤️
Thanks, time to ride it next!
Great, thanks for the info.👍
To much choice on the internet 😬and the tapes I found where to wide. Looking foward to your coming video’s.
Thanks for watching!
Collected my GS today. Have been online ordering all the very expensive bits of plastic I plan to fit! Your videos have been hugely useful in helping me to plan how I fit them.
Glad to have been of help . May even get to ride the bloody thing tomorrow rather than fitting bits to it . 😂
Very clear instructional video. Thanks very much - great job. 👍🏼
Another good job done👍🏼
Thanks, time to go and ride the thing now!
Like your videos alot, this one is also very clear. Do you have some ordering details / specs / dimensions of the 3M Helicopter tape? I am also a bit over protective of my bike🙂
This is the tape that I use, but it's not cheap! Looks like they don't sell the 2.5cm x 2m on Amazon. This is the tape that I purchased 3M Helicopter Tape 8671HS - 2.5cm x 200cm roll
Great video, thanks 👍🏻
No problem 👍
Great video! Have you had any issues with the Hayes brakes? They are two piece, and brake fluid tends to leak. Do you prefer the Brembo or Hayes? I ask because I saw them on your bike.
Brakes simply brilliant. Not bothered that they aren’t Brembo. Hayes is the parent company to Brembo I believe . They’ve sorted the leaking units out so not expecting any issues .
That is just great! I’m headed to Germany in October. And will purchase a 2023 BMW GS1250. Your videos have helped plenty as well as other channels I follow. Keep posting, and thank you.
I fitted ebay equivalents which cost AU$37 for the mudsling and AU$20 for the fender extender and they have worked fine for the last 17,000kms. The Machine Art prices are pure gouging and unacceptable.
choices choices choices , 😄 ride safe
Yes, in the UK it's £140. 😅
Nice job , but £189 for 2 bits of plastic is ridiculous . Your choice of course but i got set from our friends in the far east £26.50 inc Del. Quality seems very good and fitted well although the incuded tieraps snapped as i tightened the mudsling on. just an option if anyone is wanting a cheaper version
I know what your saying but the east just copy stuff and have no product development costs . Everyone has a budget and yup there are choices for everyone . Bennett’s did a good piece on Knock off stuff not so long ago , radiator guards etc . Ride safe 👍
Hmmmm, I'm wondering what happens when your front end compresses a bit. The cutouts that you did with the dremel will then be "higher" so won't you be back to getting some rubbing on the crash plate?
No , it will be fine. 👍
Ahhh, what i did is remove my enduro bash plate because I dont go off road. The OEM is back on. No rubbing. 😎
Nice video merci
Hello .. Can you let me know the brand and model for the dolly used on your other bike (rear wheel). Thanks
Hi , KTM power parts stand 👍
Why not buy cheap chines copies? They do the same thing for a fraction of the cost. Paid under £30.00 For muddling and fender extender! Four years in ..just as good!
because they’re cheap Chinese copies , but no doubt made in a factory next to where mudsling make theirs. TBH I didn’t even think about going Chinese…choices choices 🙈
@@gsd32i thanks for the reply mate..I gotta say it. Altogether a reputable company, made with top grade plastics, I feel my cheap Chinese moulded plastic does the same job. Makes you wonder what the mark up, is! I have to follow up with, this. I would never use functioning, parts or safety equipment..even tho I don’t have deep pockets. Cheers.
bend the enduro plate!! you went about this a very long winded way
Couldn’t contemplate 🤔 bending the expensive plate so went for butchering the mudguard extender !! But, I know what you mean . Ride safe 👍
@@gsd32i i totally get it mate!, they are expensive 👍
So for a bike of £17000 mudflaps are not included ? BMW 🤣🤣😂😂👎👎 Now if that is not a design booboo of them i do not know what is . 🙄🙄🤦♀🤦♀
Not really a design booboo......it was my booboo in getting the BMW Rallye sump guard which sticks out more than the oem one!