@@chevulamani8417 Bro India have no any drone COMPANY LIKE DJI MANY CREATORS FACING PROBLEM TO PURCHASE DRONE. NO ANY OFFICIAL STORE BUT PRIVATE SHOPKEEPER SELLING DJI DRONE. BUT VERI HIGH COST.
@@TheOfficialCasso If the Hyperlapse is done with a shutter speed of 1-2 seconds, will the drone stop to get a still frame? Or does the drone fly continuously even when taking pictures with a shutter speed of 1-2 seconds?
The DJI Mini 4 Pro is a great drone with many features, including Hyperlapse. However, there are a few reasons why your Hyperlapse might be stopping after the third shot: 1. Storage Space: Make sure you have enough storage space on your drone's microSD card. Hyperlapse files can be quite large, so you may need to delete some older files to free up space. 2. Battery Level: A low battery can cause the drone to stop recording Hyperlapse. Make sure your battery is fully charged before you start shooting. 3. SD Card Issues: If your SD card is damaged or corrupted, it can also cause problems with Hyperlapse. Try formatting the card and see if that helps. 4. Drone Software Issues: There might be a bug in the drone's software that is causing the Hyperlapse to stop. Try updating the drone's firmware to the latest version. 5. Hyperlapse Settings: Check the Hyperlapse settings in the DJI Fly app. Make sure the interval time is set correctly and that the motion lapse mode is set to "Free". If none of these solutions work, you may need to contact DJI support for further assistance.
They keep pushing out new products yet the quality declines… I have had 4 drones crap out over the last year, they were out for warranty repair for weeks each…
It is above ground level, so while you might launch at 5 m, and fly up 120m you may only be 50m over the ground where you move it to. I can fly 400 feet over just about any structure, so I could fly at 1400ft over a 1000 foot building
unless you are certified - which makes sense. It would be risky if people have too much freedom flying above where helicopters, and aeroplanes zone are.
@@mikeinjapan2004 it does not matter if you are certified. The Mini Series will be categorized as C0 from the 1st of january 2024 due to New Regulations inside the EU. And all C0 Drones from Dji will be Firmware forced to 120 Meters Max height. Dji has this already confirmed in a Facebook Comment.
DJI allow for deClassification of your drone @@Flachkraecker . there is an dji instruction and a button in settings for that . That will put your dron in open category or something and you will have to upload to dji you taken off the C0 sticker.
I’ve only had my mini pro 4 a couple of weeks and it’s blown me away. What a fantastic bit of kit !!
RESPECTED DJI COMPANY PLEASE OPEN YOUR OFFICIAL STORE IN INDIA ❤❤❤❤ I LOVE DJI COMPANY ❤❤❤❤❤❤
This what we need DJI brooo
@@chevulamani8417 Bro India have no any drone COMPANY LIKE DJI MANY CREATORS FACING PROBLEM TO PURCHASE DRONE.
NO ANY OFFICIAL STORE BUT PRIVATE SHOPKEEPER SELLING DJI DRONE.
BUT VERI HIGH COST.
China & India are in a big trade war, unfortunately we the people are the ones that suffer.
汪涛会不会破产
Same ❤😊
Hope mini 3 have this
Maquina incrível, os melhores drones so a DJI sabe fase, infelizmente perdi meu mini 3, mas creio em Deus, ele vai me abençoar novamente.
nice tutorial
❤ g00d
Sir could you reply pls whether we can perform Mapping and Surveillance on DJI Mini 4 Pro
You will have better luck writing them on their official website as through a TH-cam comment.
Does the drone stop to take a photo?
If you take a picture with ND filters and a shutter speed of 1-2 seconds, you need the drone to stop.
You kinda lost me. What do you exactly mean?
@@TheOfficialCasso If the Hyperlapse is done with a shutter speed of 1-2 seconds, will the drone stop to get a still frame? Or does the drone fly continuously even when taking pictures with a shutter speed of 1-2 seconds?
Location📍 సంబంధిత Video చాలా బాగానే చూసి Record చేయవచ్చు అన్నీ Options బాగున్నాయి🥰🥰
What is the slowest shutter speed available in hyperlapse mode?
I will try out with my Air 3 tomorrow, but likely not get back to you. I also got this ND2000 filter lying around. I think it should be sufficient.
how to resume a very long hyperlapse after a battery swap?
you cant
I think you need to save the course, then swap battery. Re-start and reload course.
İ have got the same drone, but my hyperlaps doesnt work, after 3rd shoot , it goes black.. anybody know why?
The DJI Mini 4 Pro is a great drone with many features, including Hyperlapse. However, there are a few reasons why your Hyperlapse might be stopping after the third shot:
1. Storage Space: Make sure you have enough storage space on your drone's microSD card. Hyperlapse files can be quite large, so you may need to delete some older files to free up space.
2. Battery Level: A low battery can cause the drone to stop recording Hyperlapse. Make sure your battery is fully charged before you start shooting.
3. SD Card Issues: If your SD card is damaged or corrupted, it can also cause problems with Hyperlapse. Try formatting the card and see if that helps.
4. Drone Software Issues: There might be a bug in the drone's software that is causing the Hyperlapse to stop. Try updating the drone's firmware to the latest version.
5. Hyperlapse Settings: Check the Hyperlapse settings in the DJI Fly app. Make sure the interval time is set correctly and that the motion lapse mode is set to "Free".
If none of these solutions work, you may need to contact DJI support for further assistance.
@@christilbuultjens4684 thankyou so much, will try and let you know
Can hyperlapse video be done in 4K on the mini 4 pro?
Yes, has been with the Mini 3 Pro too.
Bonjour DJI, allez vous rendre compatible les dji goggles avec les mini 4 pro car c'est aujourd'hui ce qui me fait hésiter à l'acheter ?
It's now possible. However flying it in fpv loses a lot of it's intended purpose. Same goes for the motion controller
After update not working
can hyperlapse in vertical shot?
yes
I completely lost signal after just 500m in non-urban area :/
Why can't you set the shutter speed at 1 or 2 anymore while doing hyperlapse ? That's really bad.
They keep pushing out new products yet the quality declines… I have had 4 drones crap out over the last year, they were out for warranty repair for weeks each…
funny to see more than 120 fricking meters on the drone height ritght in this tutorial.
It is above ground level, so while you might launch at 5 m, and fly up 120m you may only be 50m over the ground where you move it to. I can fly 400 feet over just about any structure, so I could fly at 1400ft over a 1000 foot building
Sadly The drone can Only go up 120 Meters.
unless you are certified - which makes sense. It would be risky if people have too much freedom flying above where helicopters, and aeroplanes zone are.
@@mikeinjapan2004 it does not matter if you are certified. The Mini Series will be categorized as C0 from the 1st of january 2024 due to New Regulations inside the EU. And all C0 Drones from Dji will be Firmware forced to 120 Meters Max height. Dji has this already confirmed in a Facebook Comment.
DJI allow for deClassification of your drone @@Flachkraecker . there is an dji instruction and a button in settings for that . That will put your dron in open category or something and you will have to upload to dji you taken off the C0 sticker.