Да все нормальные люди сначала масло и фильтр сменят, да и в систему охлаждения что-нибудь нальют, хотя бы водички, а не будут на сухую полчаса молотить, как часто видно в похожих видео. Я сам сколько машин оживлял, все время менял все жидкости после длительной стоянки.
Old, simple and reliable ... three traits that are usually found in equipment from this era into the 1980's. The soviets especially loved simplicity, reliability and mass production, which worked well for them. This dozer may not look pretty but it will never stop working ... like most Russian products.
@@vasylpupkin2934 чушь несешь! ДТ-75 НИКОГДА, ты слышишь, НИКОГДА не производился на украине. Все ДТ-75 либо Волгоградского, либо Павлоградского тракторного завода
Преимущество этих старых машин в том, что их можно ремонтировать до бесконечности... Давно, в Союзе, они работали без технического обслуживания довольно подолгу. 30 лет назад я начинал на таком свою карьеру тракториста.
Good video 👍, i'm a heavy equipment and farm equipment mechanic and I like watching videos like this one 😺, cheers, keep Up The good work 🍻, greetings from Slovenia 🇸🇮. 👋🤠
That's what I'm saying...I freak people out starting my van from outside. But a pony turning this over would be cool. Only thing would hold me back is no compression release.. But, it will be fun to find out I can do with this engine.
interesting, i just watched the same process on an old caterpillar tractor. the pony motor not only serves as the starter motor, but it also warms up the engine by routing the exhaust through the big motor. once the motor is turning over enough to have oil pressure, all you need is wait for it to warm up, then turn on the diesel fuel. once it runs you can cut off the gas to the pony motor, and cut it off altogether. I like the 2 stroke with the pull start. The caterpillars have a crank to start the pony motor
Wow I never knew that! A motor to start a motor! Learn something new every day :-) Thanks for the tip/vid comrades! And a nice thorough prep job on both motors. Good work!!
A lot of older caterpillar dozers used a 2 cylinder “pony” motor to build oil pressure and circulate warm coolant before being used to start the diesel.
I’d love to restore old machines like these in junkyards. I found an old 1970’s (I think CAT) loader that used to be used for moving old cars around a junkyard.
OK, I admit to doing it in my younger days but sucking on a hose to get gas or diesel flowing is a good way to end up in the hospital if you happen to get any of the fuel into your lungs. Just look up "aspiration of gasoline" or similar topic.
The Volgograd Tractor Plant is a heavy equipment factory located in Volgograd, Russia. It was a site of fierce fighting during World War II's Battle of Stalingrad.
@@minecraftia_suomeksi yes because I like the esthetics of machines, i'm Italian !! but when i see the functionality sacrificed for the esthetics i become furious 😂
Get an idi, those powerstrokes fire the injectors off of oil pressure (starter has to crank a while before it will fire) if the idi's have good injectors, glow plugs and the glow plug controller they will start right up in any temperature :)
you guys need to lift that blade, a couple of big ratchet straps would fix that since the hydraulic cylinders are gone. otherwise good job changing the oil and bleeding it to get it going
Дааа, вот же Люди! Трактор столько лет простоял и всё цело... У нас, в России, ни стекол не осталось бы, кабину всю раскурочили бы... это даже под присмотром....
I find it interested how some Russian machines are very similar to European and North American, and some more stuff looks like it came from another planet
Down a cylinder on start up from a sticky exhaust valve. Worked it's way in after awhile. It sat for 10 years, and one valve would have been sitting open all that time.
I was setting here watching this and was thinking to myself, that's one suck diesel for it to sound like a chainsaw then I realized what they was doing.
So that the oil does not splash in different directions, the canister must be placed in such a way that the neck is at the top and not below. And you will be happy!
Hmm I saw something like this years ago, like a decade ago, in a French-language Canadian thriller movie. The guy drove it into the woods, it broke down or got stuck and he was living in it!
Where I'm from we call them pony motors. Usually the old diesels start on gas as well until they are warmed up and then you switch the valve to diesel.
@@EasternExplorer imagine -30C and you have an electric starter! how you would start this diesel when the oil in the engine is gel?! of course you will be saved by puppy engine!
Going forward makes the blade without hydraulics dig deeper just drive backwards and drag the blade .you can't raise it without hydraulics or a come along or two or three too heavy .lol great video though old equipment built the world soviet or american they rock thanks for getting her going again .she should be restored and occasionally used its why it was made .
А мы уверены что там сейчас в новое масло воду не пустит?Если много стоял то лучше не торопится с материалом,надо убедится сначала.Может его бросили сломанным.
thatallredheadude 1 because the coils in the gas when you hit kill switch on 2 stroke as it’s dieing the pistons still pulling gas/oil mixture in to the cylinder thus lubricating the cylinder walls so that won’t rust/seize and because over time the oil will run down to rings that rings never get any real oxygen/moisture so thay don’t start to rust
Some 1poisoned the water hole It’s usually gas as they start easier in the cold . Or they even used a bow torch lol Check out how an old Bulldog tractor starts . I’m not sure about air as the duty of these machines was done in remote areas where not many resources were available ... Some even use the energy from a shot gun shell !
its so fascinating to watch you guys work on these old machines! that´s a lot of Knowledge you got there!
Nice job guys! Love to see these old machines come back to life
Guys from Estonia
Обалдеть! Первое видео, которое я смотрел, где перед первым запуском, после длительного простоя меняют масло. Молодцы! Любят технику.
Но меняют как рукажопы
Да все нормальные люди сначала масло и фильтр сменят, да и в систему охлаждения что-нибудь нальют, хотя бы водички, а не будут на сухую полчаса молотить, как часто видно в похожих видео. Я сам сколько машин оживлял, все время менял все жидкости после длительной стоянки.
ну если у тебя до этого голова не додумается,при покупку б/у машины ты что в первую очередь сделаешь???
Посмотрел все отзывы.У немцев ни одной пошлятины.Токо русскоязычные пердять!!!!Поэтому мы позади планеты вся.
@@user-kw2wx9vn2h 😂🤣😅👏👏👏🤝Ха-ха-ха. Верно.
Old, simple and reliable ... three traits that are usually found in equipment from this era into the 1980's. The soviets especially loved simplicity, reliability and mass production, which worked well for them. This dozer may not look pretty but it will never stop working ... like most Russian products.
So true, if only modern engineers took note of this. Most of the products a.k.a. vehicles we buy nowadays are just simply throwaway items
It is Ukrainian (made in Kharkiv), not Russian!
@@vasylpupkin2934 Even better. Ukrainian heavy equipment was always superior to Soviet Russian equipment.
@@johndougherty8720 Not just Ukrainian, it's it's from Ukraine of healthy people - Soviet Ukraine!
@@vasylpupkin2934 чушь несешь! ДТ-75 НИКОГДА, ты слышишь, НИКОГДА не производился на украине. Все ДТ-75 либо Волгоградского, либо Павлоградского тракторного завода
These machines are built for eternity. Great video. Greetings from Germany. :-)
Преимущество этих старых машин в том, что их можно ремонтировать до бесконечности... Давно, в Союзе, они работали без технического обслуживания довольно подолгу. 30 лет назад я начинал на таком свою карьеру тракториста.
It almost seems like this tractor was made to sit, it's got different hand turn valves to drain and various different easy access purge/bleed points.
بارك الله فيكم،، ما اجمل الجررات ودورها الهام في الفلاح لا استغناء عنها،، انانه عمل انساني كمى اني مدمن على الكانيك وصلاحه،، شكرا جزيلا لكم
Good old 2 stroke start motors!!!. You could crank till next week, without burned starter and dead batteries!!!
YOU only neet to pur voddga in fuel tang
Manual says 10 minutes maximum.
If you could ever get them to run
th-cam.com/video/3JkQSlOsmOc/w-d-xo.html essa sim foi espetacular de uma olhadinha aí pessoa
or until the jackass that doesn't really know what he's doing burns the clutch
I like that design of the radiator flush spot in the tube. Well designed.
Good video 👍, i'm a heavy equipment and farm equipment mechanic and I like watching videos like this one 😺, cheers, keep Up The good work 🍻, greetings from Slovenia 🇸🇮. 👋🤠
Awesome! Sounds great. Old dinosaurs never die.
Osulivan
@@laurierferland7922 00
Russian tech
good to see a wake up with so much care taken before.☺
Por lo demás no me gusta mucho la idea de los cambios de los demás y de la gente que no
Sara me ha dicho que si te apetece venir a casa
Having a 2 stroke to start the 4 stroke is beyond awesome.
What is the name of that? Amazing
@@arse8486 over here we call them Pony motors :)
@@arse8486 it;s called a pony motor
Corrosion37 alot of old john deers have them as well lol
That's what I'm saying...I freak people out starting my van from outside. But a pony turning this over would be cool. Only thing would hold me back is no compression release.. But, it will be fun to find out I can do with this engine.
Замечательно! Молодцы! Эх, скоро, этой весной, буду свой ДТ-75 запускать! 25 лет стоит. Вот будет весело, я думаю!)
Отлично, посмотрим)
Ждём
Будем ждать твой запуск.
DT-75 running about time sitting there long time many years ago now moving forward tractor awesome video keep up the good job friend bless you
Народна певица ваан
interesting, i just watched the same process on an old caterpillar tractor. the pony motor not only serves as the starter motor, but it also warms up the engine by routing the exhaust through the big motor. once the motor is turning over enough to have oil pressure, all you need is wait for it to warm up, then turn on the diesel fuel. once it runs you can cut off the gas to the pony motor, and cut it off altogether. I like the 2 stroke with the pull start. The caterpillars have a crank to start the pony motor
Some Caterpillars have a rope start for the pony motor
I love the way they made these things, everything about em, especially the starting mechanism
вот она техника на века
Салам из Казахстана. Молодцы что сохронили. Это мои первый трактор. Пускач красава.
I love your guys videos, you are all extremely mechanically inclined
Except when they tried driving forwards with the blade floating and no way for the machine to lift it. Looks like the cylinders are missing?
Ion they probably don’t give a fuck
Runaway insurance. ;)
Twostrokealec in Russia, diesel tells you what problem is
@@BenDrinkin1 87
I was wondering why nobody got excited when it started at first. Oh it's got a pony motor! And it's 2 stroke. Epic design
Yep! The 'пускач' (puskatsh - starter in rus) rules :D!
Сразу видно, что нерусские..Наши до запуска дизеля никогда воду в радиатор лить не будут...
Чушь не неси. Температура плюсовая не надо бояться что вода замёрзнет, поэтому сразу залили. Нацик!
By far the coolest starter I've ever seen !!!
ну всё молодцы ребята👏 теперь отдайте мне мой трактор😀
Wow I never knew that! A motor to start a motor! Learn something new every day :-) Thanks for the tip/vid comrades! And a nice thorough prep job on both motors. Good work!!
rockinrowdy13 you do know that a electric starter is just a motor to start a motor right?
A lot of older caterpillar dozers used a 2 cylinder “pony” motor to build oil pressure and circulate warm coolant before being used to start the diesel.
@@BlueAustinMaxi Well, at least some DT-75s have an electric starter to start the starter motor that starts the motor :D
Hghlgllhĺp
I’d love to restore old machines like these in junkyards. I found an old 1970’s (I think CAT) loader that used to be used for moving old cars around a junkyard.
OK, I admit to doing it in my younger days but sucking on a hose to get gas or diesel flowing is a good way to end up in the hospital if you happen to get any of the fuel into your lungs. Just look up "aspiration of gasoline" or similar topic.
That is a job well done. Congratulations.
I remember one time in the 70s I ran a 1693 Pete out of fuel 0 degrees Nebraska 2:30 in the Morning thats was the last time i ran anything out of fuel
The Volgograd Tractor Plant is a heavy equipment factory located in Volgograd, Russia. It was a site of fierce fighting during World War II's Battle of Stalingrad.
Do they still manufacture dozers?
@@brik32544 Bankruptcy in 2007. Eltsyn's gang destroyed the Russian mechanical engineering
due to old bad comments about the "oilchange", they ALWAYS film the oilchange before to start their machines XD
Hey at least it came out!
zimone89 - and we all maintain our machines to exacting standards too - lol
SacDc))) scaacwsxsscdazzzc
zi
Eu gosto de ver esses tratores que estão a muito tempo parado e o pessoal faz funcionar, ótimo trabalho!
Good job.
Niye
@@nurettinkansu3885⁸
Still easier to start than my weed eater.
Lol
😹😹😹
ДТ-75 - трудяга.💪
техника сделана на десятки лет
I love the russian design of those years, simple and effective design that could be repaired with common tools and in the field.
Very well said!
@@minecraftia_suomeksi yes because I like the esthetics of machines, i'm Italian !! but when i see the functionality sacrificed for the esthetics i become furious 😂
Soviet .
Молодцы👍🔥
Если трактор, после 10 лет простоя, выдерживает такое издевательство над собой - это хороший трактор.
Super!!! Hello from UKRAINE!!!!!
Wish my 7.3L Power stroke had a pony motor. Long vid but cool!!!
Mason Rosinsky or maybe he lives in cold climates where he runs outta battery before he can get his engine to turn over???
Get an idi, those powerstrokes fire the injectors off of oil pressure (starter has to crank a while before it will fire)
if the idi's have good injectors, glow plugs and the glow plug controller they will start right up in any temperature :)
@Mason Rosinsky 7.3 liter isn't a ford motor, they are built by international :)
@Mason Rosinsky oh yes, anything new I try and stay away from, they are built like a pop can nowadays
Mason Rosinsky ford is better than a Mexican made piece of shit dumbass kid
Never heard a bulldozer that sounded like a chainsaw.
You don't know shit about engines stupid fuck! Shut the fuck up!.
Динозавр из СССР ожил💪🙂👍
Will we see any videos of it working? I Love watching these old girls been brought back to life after years of no use
Driving video is almost ready.
you guys need to lift that blade, a couple of big ratchet straps would fix that since the hydraulic cylinders are gone. otherwise good job changing the oil and bleeding it to get it going
Дааа, вот же Люди! Трактор столько лет простоял и всё цело... У нас, в России, ни стекол не осталось бы, кабину всю раскурочили бы... это даже под присмотром....
И насралиб в кабину
@@user-xi8uf5yg9z, это-то первым делом... и написали бы : обама чмо и можем повторить...
Алексей Глотов
: а цилиндры с отвала наверно соржавели до отсутствия или ушли в загул?
Ты прав
да он не стоял 10 лет!!! ЕСЛИ БЫ СТОЛЬКО СТОЯЛ ТО ГУСЯНКИ В ЗЕМЛЮ ВРОСЛИ БЫ
Это здОрово, когда оживляют такую технику!
Роскосмо Юн хули его оживлять если она даже не умерла )
Оживлять это одно,а работать, другое,а ремонтировать при нонешних ценах и качестве деталей это третье.После всего этого уже незахочется её оживлять.
Great job ! Pleasure to watch 😁
Советский мирный трактор
😀👍
I, for a moment, thought they were going to start a cold diesel with a pull string. I know russians are tough, but that seemed a bit much :)
Ì
А движок- то на холодную 4 давит. Неплохо.
Советский союз, ни кто не повторит.
Haven't seen a donkey motor for YEARS 😂🤣😁! Love it!
I find it interested how some Russian machines are very similar to European and North American, and some more stuff looks like it came from another planet
Almost all russian machines are copies from earlier german, american models.
@@Valtra103 Except for one VERY important one - the T34, made anything the allies had look overpriced, outdated and frightened the Germans to death.
@@jp-um2fr Also the T-34 was made in the same factory as DT75.
filling the fuel system from the top saves a lot of hand priming time
Олени!!!надо было задом выезжать!!!видно же нож опущен и нет гидроцилиндров!!!!вперёд не поедет!к тому же там походу стоит понижающий....
Love these videos
To można nazwać prawdziwą reaktywacją silnika 😀
Urmăresc cu mare interes evoluția utilajelor din anitrecuti
Down a cylinder on start up from a sticky exhaust valve. Worked it's way in after awhile. It sat for 10 years, and one valve would have been sitting open all that time.
Don't abandon it again ! Use it !
For what? Its ancient
AYY B0SS it may be ancient but it works and it will do the job FINE
@@Michael-vl4of Ancient? Haha that thing was probanly built in the 80's
@@nicostenfors5690 Thats soviet engineering for you😂
They’ll be back. In 10 more years
Could you please add subtitles for what you doing? It would be helpful to understand the whole process for people with less mechanics knowledge.
I would kill for an old dozer like this!!!!!
TLC is the way to get her up and running! Great job! She’s alive!
That's a good start! Now get some rams to pick the blade up and then try to drive it to town to smash the ATM out of the bank!
And buy something not crap with the proceeds.
Когда прокачивают солярку, пробку до конца не откручивают.
без разницы до конца или нет выкручивать
I was setting here watching this and was thinking to myself, that's one suck diesel for it to sound like a chainsaw then I realized what they was doing.
So that the oil does not splash in different directions, the canister must be placed in such a way that the neck is at the top and not below. And you will be happy!
Batteries dont last too long in russia, great idea with the 2 stroke starter.
Hmm I saw something like this years ago, like a decade ago, in a French-language Canadian thriller movie. The guy drove it into the woods, it broke down or got stuck and he was living in it!
That was always the trouble with old diesels, they took forever to prime but once done would run forever without a hitch.
Ky thuật gioi quá , xung đang la bât thây co khi 👍🏆👏👏👏👏😍🤝
I hate sucking on gas hoses. We didn't have clear ones in my day. Always a mouth full of gas. Makes me sick to think about it now.
Didn't have the right girlfriend lol
I was super confused until the diesel engine started...
yea me too....and i thought i seen it all
I remember them. These tractors use to have a little petrol engine to start up the big Diesel engine. Now days we have starter motor instead.
A diesel engine can run on gas but a gas engine will not run on diesel.
Where I'm from we call them pony motors. Usually the old diesels start on gas as well until they are warmed up and then you switch the valve to diesel.
@@EasternExplorer imagine -30C and you have an electric starter! how you would start this diesel when the oil in the engine is gel?! of course you will be saved by puppy engine!
What a beautiful old Soviet Union tractor!
@Ferenc Dobos Azta, neked meg mi bajod? Ez csak egy traktor...
Going forward makes the blade without hydraulics dig deeper just drive backwards and drag the blade .you can't raise it without hydraulics or a come along or two or three too heavy .lol great video though old equipment built the world soviet or american they rock thanks for getting her going again .she should be restored and occasionally used its why it was made .
I love this video!!! I love this
Rat trying to escape at 12:46
Levi Bouwkamp hahaha good eyes lol
"HOWAAH BLYAT!" XD
It failed
You are from another world 🤣🤣
where
bloody fantastic
I like seeing old equipment being resurrected
Soviet machinery , never breaks down !!!!
Lol Russian machinery isnt durable at all
Azidu where did you get this crap info from ? It's INDESTRUCTIBLE
Lol always break down.and is sucking fuel as much as is rain in a full day.
Хоть кто то при запуске таких машин поменял все, что необходимо. А то сразу крутить стартер, со старым маслом без осмотра
Это точно))
Вечно все на соплях у них.
Поменяли масло че не видел!?
Надо было крутануть, а потом если завелся бы то и менять
А мы уверены что там сейчас в новое масло воду не пустит?Если много стоял то лучше не торопится с материалом,надо убедится сначала.Может его бросили сломанным.
i cried a little when you pulled the leaves out of the fuel tank
That is the rad.
Best quick start ever👍👍👍
i cannot start my ghod damn go-kart and you do this....i respect you,dude
Error Sk pour gas in the carburetor and give it a start
Привет из России!)
I love these old soviet tractors, one of these reasons is the starter engine.
Jan Krähe it is one caterpillar copy...
I am watching after 1 year
Wew
4:09 It looks like some kinda back-woods still!
Who else saw the mouse at 12:48? :)
Me ! I saw it in the front of the tractor, down, near the plug, and the man in blue just looked in that direction, I think.
The little motor works harder than the dozen lol
пускачу памятник надо ставить.
Царство небесное ЛЗПД !
Use a chain come alone on that front blade and its pur Russian bush mecanic. good job guys
Lahe, tuttavat kõnet kuulda. :)
Vahvad poisid.
I am 0 in mechanics but I like watching it 😁😁😁
From Russia !!!! Раньше делали на века !
Im more amazed that the 2 stroke engine started that easily than the diesel. how the hell was it not siezed?
thatallredheadude 1 because the coils in the gas when you hit kill switch on 2 stroke as it’s dieing the pistons still pulling gas/oil mixture in to the cylinder thus lubricating the cylinder walls so that won’t rust/seize and because over time the oil will run down to rings that rings never get any real oxygen/moisture so thay don’t start to rust
integrated 2 stroke gasoline engine starts 4 stroke diesel engine
pretty good when you got a engine turning at 9000 rpm to start an engine designed to run at 2500 rpm all day.
Pup motors were common , still used today ... good iron !
I thought that was a two stroke motor also that he fired up first pretty cool
Some 1poisoned the water hole
It’s usually gas as they start easier in the cold . Or they even used a bow torch lol Check out how an old Bulldog tractor starts . I’m not sure about air as the duty of these machines was done in remote areas where not many resources were available ...
Some even use the energy from a shot gun shell !
@@pushpushlambert8079that's a pony not a pup , Americans invented that shit
This is a Machine! fk off this new electric shit.................. we need some more of this strong machines
It looked like they knew what they were doing right from the beginning!!!