Ok ok ok... getting motor cut also... did the dime help while turning...the plan love to rise when turning! I used the controler for the 9630. It proved to be better than the SR72 org remote! Wanna get out and fly with my jumper remote! I tried to use diff thrus. But the factory remote has a lot of non sweet spots! Throttle went out also...remote is done!.. but on jumper remote i get all the sweet spots even diff thrust! Fun planes man...good flying in the wind....love it😊...thanks for sharing...oh yea.. i used the batt for the j35 at 800mah. Tite fit and its heavier.
Thanks for watching! I feel the dime helped the flight a little bit but I also feel like adjusting the trim will also provide similar benefits with straight level flight. I didn't notice a difference with turns as this plane turned and flew pretty good. I noticed the FX9672 doesn't feel as tail heavy vs the FX9630. With that one, I learned any nose weight (3-5grams) made it fly better and with adjusting the trims, it was able to pick up speed and fly fast. I also noticed this remote was much better vs my defective FX9630 remote. I only had 1 cutout but was able to control my plane from very far away and it didn't fall out the sky like my FX9630 which had a defective radio
I'm wondering if the antennas can be replaced in the TX to improve range. The RX just was a small wire soldered to the board. I'm sure that can easily be replaced for something better. I miss the store Radio Shack...you could easily find something to fix this in the store during your lunch break lol
Nice flight!
Thanks for watching! 👍
Nice video Mike!
Thanks for watching!
Ok ok ok... getting motor cut also... did the dime help while turning...the plan love to rise when turning! I used the controler for the 9630. It proved to be better than the SR72 org remote! Wanna get out and fly with my jumper remote! I tried to use diff thrus. But the factory remote has a lot of non sweet spots! Throttle went out also...remote is done!.. but on jumper remote i get all the sweet spots even diff thrust! Fun planes man...good flying in the wind....love it😊...thanks for sharing...oh yea.. i used the batt for the j35 at 800mah. Tite fit and its heavier.
Thanks for watching! I feel the dime helped the flight a little bit but I also feel like adjusting the trim will also provide similar benefits with straight level flight. I didn't notice a difference with turns as this plane turned and flew pretty good. I noticed the FX9672 doesn't feel as tail heavy vs the FX9630. With that one, I learned any nose weight (3-5grams) made it fly better and with adjusting the trims, it was able to pick up speed and fly fast. I also noticed this remote was much better vs my defective FX9630 remote. I only had 1 cutout but was able to control my plane from very far away and it didn't fall out the sky like my FX9630 which had a defective radio
@@mike_t_007 yep🙏👍💫🦾
Im thinking its a comm issues with TX and RX. Cant be heat... i dont think
I'm wondering if the antennas can be replaced in the TX to improve range. The RX just was a small wire soldered to the board. I'm sure that can easily be replaced for something better. I miss the store Radio Shack...you could easily find something to fix this in the store during your lunch break lol
@mike_t_007 yep. Was the bext thing ever...