วีดีโอ

I'm wondering if the antennas can be replaced in the TX to improve range. The RX just was a small wire soldered to the board. I'm sure that can easily be replaced for something better. I miss the store Radio Shack...you could easily find something to fix this in the store during your lunch break lol

@mike_t_007 yep. Was the bext thing ever...

Thanks for watching! I feel the dime helped the flight a little bit but I also feel like adjusting the trim will also provide similar benefits with straight level flight. I didn't notice a difference with turns as this plane turned and flew pretty good. I noticed the FX9672 doesn't feel as tail heavy vs the FX9630. With that one, I learned any nose weight (3-5grams) made it fly better and with adjusting the trims, it was able to pick up speed and fly fast. I also noticed this remote was much better vs my defective FX9630 remote. I only had 1 cutout but was able to control my plane from very far away and it didn't fall out the sky like my FX9630 which had a defective radio

@@mike_t_007 yep🙏👍💫🦾

Thanks for watching!

Thanks for watching! 👍

Lol 😂😂

Hey MCEMT! Just uploaded a quick maiden of the FX9672! Mine cut out in this field but not as bad as the FX9630 did th-cam.com/video/uetS30WQO8s/w-d-xo.htmlfeature=shared

@@mike_t_007 gonna. Check it out. I flew a few days ago same spot. But...this time i used the controller for my 9630. It did not cut out on reg flite. But wjen i took it to tne max of about 400ft it happened....motor cut...very quick.. not even a sec... but nonetheless its an interuption in operation. I want to send it back. But the hastle of it all. Also while at 75 percent throttle onbench. The control surfaces vibrate and shake very hard... i like the plane at the price point...but QC and QA is not in their line up! Checking it out ur vid now,!

Hey Man! Glad you had a chance to check it out! Stay tuned....more good stuff is on the way🫡

Just uploaded a quick maiden of the FX9672! th-cam.com/video/uetS30WQO8s/w-d-xo.htmlfeature=shared

Thanks! 👍

Thank you for watching! Have some great content coming soon👍🏾

Thank you for watching! More videos coming soon

Available thru the HomeDepot site or app only! www.homedepot.com/p/RIDGID-18V-SubCompact-Brushless-1-2-in-Right-Angle-Impact-Wrench-Tool-Only-R8721B/324715887?source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D25P-025_009_PORTABLE_POWER-NA-Multi-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NA-PortPower_EXISTING_BHU24&cm_mmc=SHOPPING-BF-CDP-GGL-D25P-025_009_PORTABLE_POWER-NA-Multi-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NA-PortPower_EXISTING_BHU24-71700000113152329--&gad_source=1&gclid=EAIaIQobChMIoaWCpNPViAMVUkL_AR1Y0QmNEAQYASABEgKs4fD_BwE&gclsrc=aw.ds

I used a Milwaukee 42-06-2962. Was not a direct fit and needed modifications to the ears to fit. You can probably use a 42-06-2555 from the M12 1/2" Stubby but you'll need access to a lathe to enlarge the hole at the bottom to match

Thanks for watching! 👍🏾

@@mike_t_007 Yes, I had already assumed you would be using the torque wrench, my point is not about the wrench, it is about how the tires need to not have the vehicles full weight on them when you use the torque wrench (to get them tightened down good (and evenly).

Thanks for watching!This is the R862312 RIDGID 4 mode Impact Driver

Thanks for watching! 👍🏾

Thanks Man! This is a beast. It goes well with the Ridgid Right angle

Yes it does!

Thanks Singlecams! Knew this was a hit when I saw your post 👍🏾

Lol

Just created the new RIDGID Mini Torque that's their 4 Mode Impact Driver and Milwaukee 1/2 Anvil Check it out 😎! th-cam.com/video/wcTF-ONyQuk/w-d-xo.htmlfeature=shared The lug nuts sticking is still a problem lol

I'm using the 3AH Octane battery. Fits and works perfectly with this tool. Not too heavy and has alot of power. Which battery did you use with yours?

Just created the new RIDGID Mini Torque that's their 4 Mode Impact Driver and Milwaukee 1/2 Anvil Check it out 😎! th-cam.com/video/wcTF-ONyQuk/w-d-xo.htmlfeature=shared

Thanks but think you posted on the wrong video

Yes! It's light and has the same power of the 5AH. I love it

I returned that one and got a good deal on the DCF923 Dewalt which is smaller/lighter and has about 90% of the same power. I'm getting the new Ridgid 4 mode impact driver soon and will do a new test between them for fun 👍🏾 I may get another eWork again soon. It's a great impact for the money

Just created the new RIDGID Mini Torque that's their 4 Mode Impact Driver and Milwaukee 1/2 Anvil Check it out 😎! th-cam.com/video/wcTF-ONyQuk/w-d-xo.htmlfeature=shared

Normally yes

Can you see the links to my clips? They're not that great because I never make videos for TH-cam.

​@MrCaribe65 For.some reason I wasn't getting them for a while. Can you copy /paste them here or post them on your TH-cam channel? Id they're on TH-cam, check and see if they're set to private

@@mike_t_007 th-cam.com/video/c-VOHOMHgug/w-d-xo.htmlsi=MeX9L3oQmOoHDSF0

@@mike_t_007 th-cam.com/video/h8xGSddypyc/w-d-xo.htmlsi=rwaSgdsZ9WEfXppt

It's a very good tool. Perfect size to power ratio! Only thing it's missing is the trilight on the nose like the DeWalts. Picked up a DCF850 for a great deal and added a 3/8 anvil. Then got another deal on a DCF923... End up returning this one but am trying to justify getting another one for the collection 😁 and now they have a new High Torque version as well😎

You'll love it. The quality is amazing and it's very strong for it's size! Keep me posted when you get it and how you like it 😎

I got it. It's a beast! No problem taking off lug nuts on Heavy Duty Ram trucks.

@@juaninelmascabron2141 Can you post a demo of yours when you get a chance?

Yes! I have a new demo video coming soon. Super excited. It'll be worth the wait

This tool is nice! Comes with a 4aH battery bag and some nice sockets😎 Highly recommend it!

Thanks Bro! I appreciate the love

Thanks Man! Will do

Thanks Man! Just created the new RIDGID Mini Torque that's their 4 Mode Impact Driver and Milwaukee 1/2 Anvil Check it out 😎! th-cam.com/video/wcTF-ONyQuk/w-d-xo.htmlfeature=shared

It was a quick spur of the moment run outside and let's see what they can do test! I'll definitely charge up both batteries again for future tests. The Ridgid definitely was stronger but not by much. The 850 "helped out" in the end😎

Yes! www.reddit.com/r/Dewalt/comments/12r0w5w/dcf850_with_38_anvil/?

Just created the new RIDGID Mini Torque that's their 4 Mode Impact Driver and Milwaukee 1/2 Anvil Check it out 😎! th-cam.com/video/wcTF-ONyQuk/w-d-xo.htmlfeature=shared

He's got a couple new videos up with the ⅜" anvil on the DCF850