13:00 if you want a transparent stinger for streamlabs OBS and not OBS studio **THIS IS IMPORTANT** {{{ Set Alpha Mode to straight }}} it was not transparent in premultiplied mode, but that may have just been a me problem.
@@ScottFichter No, thank you. This video was a BIG help for me, since every other video I found on this topic was just how to ADD a stinger rather then how to make your own. I also lucked out that you used the same editing software I use, so following along was 10 times easier. But SLOBS doesn't have a test feature for stingers, so it was a lot of trial and error getting it to work. I finally figured it out, and because I know I'm not the only SLOBS user, I figured others would stumble on the same hurdle I did.
Nice tutorial! I've figured it out by luck here and there over the past little while, but always ended up screwing something up the next time I tried it. Turning it into a Fusion clip first is the key! Thanks. I think pre multiplied allows for matted/semi transparent edges, but can introduce colour in the background. Straight will go from opaque to transparent with no cutoff but doesn't include an RGB layer, so both have advantage/disadvantage. Use premultiplied if you want soft edges though.
I've never wanted to watch a tutorial till the end without skipping ahead. Needless to say, you are fantastic at this. Thank you for creating such a straight forward, concise video. Not all heroes wear capes :)
Thanks Grim! Best wishes to you. FYI: I made a second DYI stinger video. It a bit more detailed. I just posted it th-cam.com/video/BOi94puTH3Q/w-d-xo.html
wow i hope this is real cuz i am going to try its out i have had many problems but they were fixed it is just the stinger that has been the problem så finger crosst hope this works
Dude... you saved 24h straight of work and research. I've already done some macro bullshit and blablabla with other programs and stuff... BUT THIS IS BETTER! Thx so much!
@@ScottFichter Good to know buddy. Again, thx so much for share this important feature! Btw this green screen cleaner is UNBELIEVEBLE! Gratz from Brasil!
tysm! after spending hours trying to figure out why my background wasnt transparent after doing what 4 diff videos told me to do I FINALLY GOT IT!!!!!! UR THE BEST! TY!
Greg, did you delete you other message. I did see it but the system would not allow me to reply. I sent you a message on one of your vids. I have no idea why you don't have a "Add to Render" button .
@@ScottFichter I have been learning a lot about DaVinci Resolve 17 lately. I know have working knowledge with DVR. I watched your video again, with more more knowledge and it worked fine. Thank you for all you do. Thank you for helping to Get Sum!
Hi Scott, I have just made a transition with my logo and it looked great thankyou! However on OBS it is lagging and not finishing and the sound was really bad. What did I do Wrong?
This video saved my sanity. I kept exporting my procreate animation with a transparent background and it was never actually transparent so I decided to make it a green background then removed the green in the colour tab of DaVinci and did the other steps you mentioned and I finally got a transparent animation for my transitions!!! thank you :))
When you have your clip saved from DaVinci use Shutter Encoder to make this clip as WEBM file - weight so much less like original. In settings chose VP9 function and double click on advance and chose Enable alpha. Your welcome :)
@@ScottFichter I like to keep it simple Scott... the channel is built on an old cell phone... Frank made a comment on my farm video. It was a little shaky at times I had to remind him this is TH-cam not Hollywood
Great video, but the only downside was the outputted transition was large (118MB) it was causing high cpu & dropped frames. How about adding an extra step between Resolve and OBS with ffmpeg to re-encode the transition (using settings like " ffmpeg -i OLDFILE.mov -c:v libvpx-vp9 -pix_fmt yuva420p NEWFILE.webm ") to lower file size (only 2.5MB now) and then lower cpu & zero dropped frames.
Wow! 118MB. For some reason I was not getting those sizes from my output. I've heard of FFmpeg but have never explored it. Thanks for the tip man. I really appreciate it.
Love this, Scott. So glad I subscribed to your channel. Just starting out in streaming using OBS, not sure I will end up doing it just yet as I am no TH-camr, but it's fun learning and trying it. I asked recently about lower 3rds for OSX - looking forward to seeing that one. Thanks - John
Hi! Nice Video, but I have a problem. I'm trying to make a logo reveal with a flash-light using the composite mode (dark) on my logo. Everything looks perfect till I save the clip to the file. I need this in the transparent background well I'm using QuickTime - GoPro CineForm - RGB 16-bit with checked box -Export Alpha and data - Full. But the problem is after I export this, the logo is "normally visible" - that's looks like the composite mode got turned off every time. When I'm Doing all the CRUCIAL things that Scott said about them, straight didn't work (after making the new compound clip) my logo lost composite settings. Does anyone know if this is possible to do this other way? Like I said I need a transparent clip with a logo that appears on the flare video clip - show when blinking only- and disappears after. In Timeline everything looks fine.... thank you for any solution
GOD BLESS YOU THANK YOU SO MUCH i do my best to make all my stream assets for free but most of the stinger tutorial videos use After Effects 😭😭 so thank you so much for this! it was super easy to understand !!
Micheal, it took some heavy duty research to pull this one off. It almost did not get produced. I will be revisiting this method in the future. Thanks man.
@@ScottFichter What about adding a move transition effect animation if I want the stinger transition go away differently from scenes? 🤔 I would like to use my stinger transition but I would like to add an animation or add a movement to make it go away differently if its fades away, I would like to make a spiral then go away for example. Without editing the actual video. Thanks for the reply 😊
@@NEPHILIM-WARRIOR You can make a video and have it move into view at at time that you desire. Is this what you want? You can do this with the Move Transition plugin. You can also hide and show the video with a hotkey and It can be set to work in any scene.
THANK YOU VERY MUCH I WORK FOR A RADIO STATION HERE IN AFRICA, ZAMBIA, SO I NEEDED THIS STINGER FOR MY LIVE FACEBOOK VIDEOS. THIS HAS REALLY HELPED IT REALLY MAKES OUR ON AIR PROGRAMMES LOOK PROFESSIONAL, ONCE MORE, THANKS. #SPICEFMZAMBIA
Great tutorial, one question, How do you do the flip camera transition in the minute 9 of your video? It's a obs plugin? Thanks for your tutorials, are great.
@@ScottFichter I dont know it your experienced with Movavi VIdeo Editor Plus, great program, lots of tutorials on it, but ZERO tutorials on how to use this particular program for designing, editing, and making overlays and transitions, like none. If yor up for it, id love to see some tutorials by you on Movavi program, and using it to make things for streams, and more specifically Streamslabs! Either way, keep up the great videos!
Great, but... how do I leave a comment on your TH-cam video? I kid. I've been binging these like Netflix lately and it's putting a serious dent in my learning curve. You've probably answered most of my questions somewhere already, (like--how do you move your camera box around so many ways so effortlessly!?) and I'm just trying to get caught up. Thanks for making these. SUPER helpful. I'm trying use OBS to supercharge zoom and override its default output. MacOS really seems to put a damper on a lot of functionality, especially with Stream Deck. Anyway, I can't thank you enough!
kjdroz, yes, I had a Mac for a long time but as the machine got older repairs were needed and the costs to keep it running did not make sense. I decided to build my own PC and I have not looked back. You are 100% correct OBS has a closer relationship to PC than Mac in my opinion. Many have asked that I make a video about connecting OBS to Zoom. I see now that I need to make a video about this sooner than later. Consider Liorianbaord as a replacement for Stream Deck. th-cam.com/video/hS-4R3jGpS8/w-d-xo.html . I use special software called Camtaisa to edit my videos. If your looking to do the same thing you'll want to purchase ScreanFlow.
@@ScottFichter thanks again, for your thoughtful reply. The challenge with zoom right now is figuring out how to create masks for various configurations. Like… if there are two people talking (host and guest) in a large gallery, how do I route the host and speaker into a new scene, formatted with OBS goodies like lower thirds and mind blowing accommodations to make the guest feel like they are on a TV talk show? I’m starting with just getting the host window jazzed up, but ultimately, I want to have the host spotlighted in a way that pulls from a zoom call on a separate display, so that I can override zoom’s output to deliver a custom show. Thanks again!
@@ScottFichter Interesting. What I'm playing around with is using masks to grab pinned guests. Gallery view is rough, but I think that pins can create a static source to build masks to isolate participants, so that I can create a special window for the host window and spotlight that output. It's kind of cool to do things like use the gallery view in the background, although I can't figure out how to open multiple settings at once. It would be extra cool if I could crop and scroll the gallery window so that it doesn't show the toolbar and application header and just drift all participants across the background with some filters to make the gallery more subtle.
Conebone, this is a terrific question. I never have and never will purchase the pro version which is called Davinci Resolve Studio. This video was made with the free version.
Great tutorial Scott! I have watched several different content creators in an attempt to get the darn thing rotating, 3D, have sound , transparent back AND all show that way in OBS. Took forever! Wish is would have checked here first! Good Stuff. Easy to follow! I liked it. I am also a content creator looking to improve my streams and vids using OBS and Resolve (New User - Recovering IMovie User) ! Take Care. Keep em Coming! Brian
I just posted a new one that goes into a bit more detail on the codecs and the interface. I think you'll love it. th-cam.com/video/BOi94puTH3Q/w-d-xo.html
Great stuff man. Simple but pretty much everything anyone needs without all the Fusion madness. You could actually do heaps just in the inspector. I learnt heaps of neat tricks. Thanks for pulling it all together.
Snappy, yes, this one really took some heavy duty research. I need to make more of these. I have a few subjects that are absolute HUGE topics but the research required is massive and I've been pushing those off.
Fantastic!! Tutorial, and said by a trained professional teacher ...Original *Copyright* free Stingers!! ...It seems you can teach an old dog new tricks!! I, and my students, thank you, and furthermore, when I finally get time to make and upload teaching videos (I teach english) you can be sure your name and channel will be mentioned and given the due recognition.
Wow, excellent job! I've watched a few of these vids and yours is, by far, the best. I'm not sure how much Davinci has changed since you made this, but you are a natural at this. Keep making content, brother, 'cause this channel gonna blow up. You got one more new sub and like here...off to watch and like some more!!!
@@GreyWolfSTF No email does not work. Take time to think out your question. Provide detail, provide clarity, be positive, be humble, be detailed. forum.blackmagicdesign.com/viewforum.php?f=21
13:00 if you want a transparent stinger for streamlabs OBS and not OBS studio **THIS IS IMPORTANT** {{{ Set Alpha Mode to straight }}} it was not transparent in premultiplied mode, but that may have just been a me problem.
Thank you.... Thank you.....
@@ScottFichter No, thank you. This video was a BIG help for me, since every other video I found on this topic was just how to ADD a stinger rather then how to make your own. I also lucked out that you used the same editing software I use, so following along was 10 times easier. But SLOBS doesn't have a test feature for stingers, so it was a lot of trial and error getting it to work. I finally figured it out, and because I know I'm not the only SLOBS user, I figured others would stumble on the same hurdle I did.
@@nekupe Awesome... Stay strong man.
The tutorials of this guys are ridiculously op, these are one of the best!
www.bluefoxcreative.com/wp-content/uploads/yep.gif
Nice tutorial! I've figured it out by luck here and there over the past little while, but always ended up screwing something up the next time I tried it. Turning it into a Fusion clip first is the key! Thanks.
I think pre multiplied allows for matted/semi transparent edges, but can introduce colour in the background. Straight will go from opaque to transparent with no cutoff but doesn't include an RGB layer, so both have advantage/disadvantage. Use premultiplied if you want soft edges though.
Awesome dude!
exactly what I've been looking for (for months!) thanks so much. great explanation and editing. straight to the point. appreciated!!!
Thanks brother. Getsum!
I've never wanted to watch a tutorial till the end without skipping ahead. Needless to say, you are fantastic at this. Thank you for creating such a straight forward, concise video. Not all heroes wear capes :)
Thanks Grim! Best wishes to you. FYI: I made a second DYI stinger video. It a bit more detailed. I just posted it th-cam.com/video/BOi94puTH3Q/w-d-xo.html
Do you know a version that is compatible with Windows 7? I saw resolve 11 was, but I couldn't find it anywhere
Cars, I'm unaware of a version that will work well with Windows 7. There may be older versions you could download but I'm not sure where to find them.
I still don't get why this only has 600 views it should have 100k
Tell me about it. This one took some big time research. Hopefully it will catch on. Thanks brother!
wow i hope this is real cuz i am going to try its out i have had many problems but they were fixed it is just the stinger that has been the problem så finger crosst hope this works
It's real dude.... Trust me.
Thanks for this. I just downloaded the program and this was what I really wanted.
You're welcome!
Damn REALLY good video helped me out sooo much. Thanks
Thanks Falk.
Good stuff Scott!🔥🙌
Thanks Paulie
legend this helped loads
Dude... you saved 24h straight of work and research. I've already done some macro bullshit and blablabla with other programs and stuff... BUT THIS IS BETTER! Thx so much!
Zealot, I almost gave up on this tutorial because the needed info VERY hard to find. No joke. I'm glad it helped bro.
@@ScottFichter Good to know buddy. Again, thx so much for share this important feature! Btw this green screen cleaner is UNBELIEVEBLE! Gratz from Brasil!
@@zealot1023 Thanks Zealot, stay in touch brother.
Thanks for the video! Honestly, the "Do Your Itself" thumbnail is what brought me here, haha.
Damn! I must be doing something right. Thanks Doc..
The best explanation I have seen ever! Thank You! You defenitely have the gift of TEACHING.
Thanks bro. That means a ton!
How does this work if I’m on Obs for Mac OS?
It the same for both PC and Mac for the most part.
You've helped me out so much! Even for the basic of basic stinger I've made, you've helped out so much! Much love my guy!
THANK YOU SCOTT - total beginner with Resolve and I was really struggling with getting audio on my stinger as well.
Glad it helped!
Thank you for this its brilliant and now i can add that personal touch to my streams when changing screens!
Have fun with it FPL!
Great Job, Scott. Thank you!
Thank you Greg!
THANK YOUUUU
What do you do when the background doesn't automatically checkerboard in the Fusion window?
Can you use this file in OBS as a media that will pop on on hotkey that will also be transparent?
YES! I'm wanting to make a lower third pop out with hot key some time.
@@ScottFichter me too.
Nice Video!
Can you please make a video on how to make a Stinger transition in Filmora9?
Hmmm.. I'm going to have to buy the software fist. I will also have to confirm that Filmora makes video clips with alpha channel.
@@ScottFichter I cant wait for the video! ;)
tysm! after spending hours trying to figure out why my background wasnt transparent after doing what 4 diff videos told me to do I FINALLY GOT IT!!!!!! UR THE BEST! TY!
Glad I could help!
My "Add to Render Queue" Button never became available.
Greg, did you delete you other message. I did see it but the system would not allow me to reply. I sent you a message on one of your vids. I have no idea why you don't have a "Add to Render" button .
@@ScottFichter I have been learning a lot about DaVinci Resolve 17 lately. I know have working knowledge with DVR. I watched your video again, with more more knowledge and it worked fine. Thank you for all you do. Thank you for helping to Get Sum!
I gave PowerDirector 5 bucks and they take their Watermark off the editing program
Yes, I have heard very good things about Power Director.
@@ScottFichter what I like about it it's reliable it never glitches
Every little detail.. so clearly explained... thank you Scott
Glad it was helpful!
Hi Scott,
I have just made a transition with my logo and it looked great thankyou! However on OBS it is lagging and not finishing and the sound was really bad. What did I do Wrong?
what's the file size of the video that you made with Davinci? What's the play length of the video you made?
This is incredibly helpful, thank you man ♥
Hi, I just came to give you a big thank you. Your tutorial saved me and now I'm using it on my Twitch streams.
Greetings!
You're welcome!
This video saved my sanity. I kept exporting my procreate animation with a transparent background and it was never actually transparent so I decided to make it a green background then removed the green in the colour tab of DaVinci and did the other steps you mentioned and I finally got a transparent animation for my transitions!!! thank you :))
CJ, this video is my favorite. It took tons of research to pull off and it makes the process stupid easy.
When you have your clip saved from DaVinci use Shutter Encoder to make this clip as WEBM file - weight so much less like original. In settings chose VP9 function and double click on advance and chose Enable alpha. Your welcome :)
What's DaVinci?
DaVinci Resolve is a video editing program (for Desktop) that is just as good if not better than Adobe's Premier program that costs $20 / Month.
@@ScottFichter I like to keep it simple Scott... the channel is built on an old cell phone... Frank made a comment on my farm video. It was a little shaky at times I had to remind him this is TH-cam not Hollywood
Great video, very useful and well presented in easy to understand terms.Thanks.
Glad it was helpful!
Great video, but the only downside was the outputted transition was large (118MB) it was causing high cpu & dropped frames. How about adding an extra step between Resolve and OBS with ffmpeg to re-encode the transition (using settings like " ffmpeg -i OLDFILE.mov -c:v libvpx-vp9 -pix_fmt yuva420p NEWFILE.webm ") to lower file size (only 2.5MB now) and then lower cpu & zero dropped frames.
Wow! 118MB. For some reason I was not getting those sizes from my output. I've heard of FFmpeg but have never explored it. Thanks for the tip man. I really appreciate it.
Love this, Scott. So glad I subscribed to your channel. Just starting out in streaming using OBS, not sure I will end up doing it just yet as I am no TH-camr, but it's fun learning and trying it. I asked recently about lower 3rds for OSX - looking forward to seeing that one. Thanks - John
When everything is setup and tested and you're ready to pull the trigger with your first live it will be exciting. Trust me.
Hi! Nice Video, but I have a problem. I'm trying to make a logo reveal with a flash-light using the composite mode (dark) on my logo. Everything looks perfect till I save the clip to the file. I need this in the transparent background well I'm using QuickTime - GoPro CineForm - RGB 16-bit with checked box -Export Alpha and data - Full. But the problem is after I export this, the logo is "normally visible" - that's looks like the composite mode got turned off every time. When I'm Doing all the CRUCIAL things that Scott said about them, straight didn't work (after making the new compound clip) my logo lost composite settings. Does anyone know if this is possible to do this other way? Like I said I need a transparent clip with a logo that appears on the flare video clip - show when blinking only- and disappears after. In Timeline everything looks fine.... thank you for any solution
Damn man, I'm honestly not sure what to suggest on this question.
thx great video
Glad you liked it!
GOD BLESS YOU THANK YOU SO MUCH i do my best to make all my stream assets for free but most of the stinger tutorial videos use After Effects 😭😭 so thank you so much for this! it was super easy to understand !!
Glad I could help
SwEEt! Thanks A lot that was a great big help.
Glad it helped!
@@ScottFichter big time!
Is there a video editor that isn't DR? I've tried registering for this and it wont allow me to add where I live.
to do this with shotcut?
Yes, that would be amazing. I'll look into it.
Is there anyway to do this with a greenscreen clip?
Yes add a filter to the source. It's very easy.
@@ScottFichter thanks it looks amazing now! Would you mind if I used your instructions with my own voice and video to show other?
Scott I must say you are the right man to get this infomation from. you just hit it and the information is well asimilated. Thank you so much :)
Very welcome
Pretty neat!!!
Micheal, it took some heavy duty research to pull this one off. It almost did not get produced. I will be revisiting this method in the future. Thanks man.
Can you edit an already made stinger transition with this software?
A video? Er... not really. You can change color and possibly slow down the animation.
@@ScottFichter What about adding a move transition effect animation if I want the stinger transition go away differently from scenes? 🤔 I would like to use my stinger transition but I would like to add an animation or add a movement to make it go away differently if its fades away, I would like to make a spiral then go away for example. Without editing the actual video. Thanks for the reply 😊
@@NEPHILIM-WARRIOR You can make a video and have it move into view at at time that you desire. Is this what you want? You can do this with the Move Transition plugin. You can also hide and show the video with a hotkey and It can be set to work in any scene.
Can these be made with Filmora??
Apple Motion for Mac users can do this as well. $50 for the software, no additional cost.
Desktop or Phone App? It sounds wicked.
THANK YOU VERY MUCH I WORK FOR A RADIO STATION HERE IN AFRICA, ZAMBIA, SO I NEEDED THIS STINGER FOR MY LIVE FACEBOOK VIDEOS. THIS HAS REALLY HELPED IT REALLY MAKES OUR ON AIR PROGRAMMES LOOK PROFESSIONAL, ONCE MORE, THANKS.
#SPICEFMZAMBIA
Welcome. Upper case means yelling which I think you did not wish to convey.
Bro my mind continues to be blown by your work! Thank you.
HELL YEA!
Doesnt work anymore.
Awesome tutorial as always Scott! You ROCK!
Glad you liked it!
Thanks for sharing quality content, super easy to understand and follow along! Now I have a new stinger for my streams :}
Thank you for this! Subbed and checking out other videos too.
Welcome!
thank you so much!!!!!6
Great tutorial, one question, How do you do the flip camera transition in the minute 9 of your video? It's a obs plugin? Thanks for your tutorials, are great.
I made a video about it. It's unlisted right now. You're the first to see it. th-cam.com/video/ZmYDjCgpn8s/w-d-xo.html
@@ScottFichter i wanted to ask the same. Looks very nice! ♥
i like your energy bro
Thanks bro. I'm experimenting with low energy right now. I'm testing it.
@@ScottFichter I dont know it your experienced with Movavi VIdeo Editor Plus, great program, lots of tutorials on it, but ZERO tutorials on how to use this particular program for designing, editing, and making overlays and transitions, like none. If yor up for it, id love to see some tutorials by you on Movavi program, and using it to make things for streams, and more specifically Streamslabs! Either way, keep up the great videos!
Thank you Scott! All the way from South Africa!
FANTASTIC.
does it work with SLOBS aka Streamlabs?
Yes BUT I think the file format must be WEBM.
Great, but... how do I leave a comment on your TH-cam video?
I kid. I've been binging these like Netflix lately and it's putting a serious dent in my learning curve. You've probably answered most of my questions somewhere already, (like--how do you move your camera box around so many ways so effortlessly!?) and I'm just trying to get caught up. Thanks for making these. SUPER helpful. I'm trying use OBS to supercharge zoom and override its default output. MacOS really seems to put a damper on a lot of functionality, especially with Stream Deck. Anyway, I can't thank you enough!
kjdroz, yes, I had a Mac for a long time but as the machine got older repairs were needed and the costs to keep it running did not make sense. I decided to build my own PC and I have not looked back. You are 100% correct OBS has a closer relationship to PC than Mac in my opinion. Many have asked that I make a video about connecting OBS to Zoom. I see now that I need to make a video about this sooner than later. Consider Liorianbaord as a replacement for Stream Deck. th-cam.com/video/hS-4R3jGpS8/w-d-xo.html . I use special software called Camtaisa to edit my videos. If your looking to do the same thing you'll want to purchase ScreanFlow.
@@ScottFichter thanks again, for your thoughtful reply. The challenge with zoom right now is figuring out how to create masks for various configurations. Like… if there are two people talking (host and guest) in a large gallery, how do I route the host and speaker into a new scene, formatted with OBS goodies like lower thirds and mind blowing accommodations to make the guest feel like they are on a TV talk show? I’m starting with just getting the host window jazzed up, but ultimately, I want to have the host spotlighted in a way that pulls from a zoom call on a separate display, so that I can override zoom’s output to deliver a custom show. Thanks again!
@@kjdroz That guest will have to be behind green screen to pull this off.
@@ScottFichter Interesting. What I'm playing around with is using masks to grab pinned guests. Gallery view is rough, but I think that pins can create a static source to build masks to isolate participants, so that I can create a special window for the host window and spotlight that output. It's kind of cool to do things like use the gallery view in the background, although I can't figure out how to open multiple settings at once.
It would be extra cool if I could crop and scroll the gallery window so that it doesn't show the toolbar and application header and just drift all participants across the background with some filters to make the gallery more subtle.
thank you
Awesome Tutorial! Can you do all this with the free software or did you make this on the premium one?
Conebone, this is a terrific question. I never have and never will purchase the pro version which is called Davinci Resolve Studio. This video was made with the free version.
You are the best! Thank you for the immense help and the really quick reply ❤️❤️❤️❤️❤️
Great tutorial Scott! I have watched several different content creators in an attempt to get the darn thing rotating, 3D, have sound , transparent back AND all show that way in OBS. Took forever! Wish is would have checked here first! Good Stuff. Easy to follow! I liked it. I am also a content creator looking to improve my streams and vids using OBS and Resolve (New User - Recovering IMovie User) ! Take Care. Keep em Coming! Brian
Yo Iron Horse Route, Thanks brother. It took me some hard core research to pull this one off. Best wishes.
Well, thank you very much for that. What a great video!
Glad it was helpful!
Thank you so much! This was so helpful
I just posted a new one that goes into a bit more detail on the codecs and the interface. I think you'll love it. th-cam.com/video/BOi94puTH3Q/w-d-xo.html
dang this is super cool
This one took a good two days to make. It was the research that got me. I learned a ton.
Scott Fichter glad you could share !!
Thanks for stopping by my channel btw
@@23KCOutdoors Of course man. Thanks for the great comment man. It helps more than you think.
Great video I was wondering is it possible to do the same with a video clip instead of a png
Of course but if you want to mask out elements it'll have to be isolated with color or have it's own alpha channel itself.
Thank you so much! I'll be creating a bunch of transitions from now on. :D
2 Years later and this was still very useful. Thanks for the tip!
Can we use this for our videos for youtube?
Davinci? YES Videos with Alpha Channel, NO
what did i do i swear i did everything but I got a black background still
hmm sorry be one of those
i didnt check export alpha my bad
I appreciate the response to your own question.
Great stuff man. Simple but pretty much everything anyone needs without all the Fusion madness. You could actually do heaps just in the inspector. I learnt heaps of neat tricks. Thanks for pulling it all together.
Snappy, yes, this one really took some heavy duty research. I need to make more of these. I have a few subjects that are absolute HUGE topics but the research required is massive and I've been pushing those off.
I love your tutorial bro, thanks for this
You're welcome!
Thank you for this!!
You're so welcome!
Great job well done Scott
Thank you thank you..
So helpful, Thank You!
Glad it was helpful!
Another super guide.
GETSUM Amit.
Thank you, thank you, thank you! This was extremely easy to follow, and my channel will be better for it.
You're very welcome!
Fantastic!! Tutorial, and said by a trained professional teacher ...Original *Copyright* free Stingers!! ...It seems you can teach an old dog new tricks!! I, and my students, thank you, and furthermore, when I finally get time to make and upload teaching videos (I teach english) you can be sure your name and channel will be mentioned and given the due recognition.
Rock on! Thanks brother!
let's goooo
Outstanding!!!
Thanks Jon. GETSUM brother.
i vouch for this
Thanks Gopher.
Thanks dad ~ GBU
GETSUM
Wow, excellent job! I've watched a few of these vids and yours is, by far, the best. I'm not sure how much Davinci has changed since you made this, but you are a natural at this. Keep making content, brother, 'cause this channel gonna blow up. You got one more new sub and like here...off to watch and like some more!!!
Thanks Sublime I appreciate you man.
Whoa. This is great stuff! Thanks a lot Scott! 😁
dude's a legend
thx
good tutorial
Thanks
You are the best
THANK YOU!
Thanks Scott. You are really doing an excellent job. You spare no effort to teach thousands of us.
Thanks a million
So nice of you
Free is good.
Yes it is!
Does this work in Streamlabs OBS?
Videos with alpha channel? Yes, I think they do work with SLOBS.
Thanks for a well explained tutorial. Subscribed.
Thanks Set! Best wishes.
thank you for all your videos!!!! is there a way to upload and use different stinger videos during the live streaming?
Different stingers hmmmm... I'm leaning towards no. I will look into it.
sound effects for new fusion and new compound clip were awesome
can you make it in filmora?
Filmora is very powerful. I think the answer is yes.
@@ScottFichter will you make one video to make stringer transition effect in filmora x.
Another great video Scott! Hit me up in the DM's
Will do Gear. I've not been there in a while.
Nice Work Scott! Thank you.
Very welcome!
Your tutorials are always easy to learn Scott.
Thanks buddy. I hope you're doing well.
Great tutorial Scott, Get some man ✌👍
GETSUM Andy!
Be great if I could get Davinci Resolve to install. Every time I've tried I get an archive error while unzipping the download.
Get on the forms at BlackMagic right now. They can help
@@ScottFichter Hopefully someone there can help. Their support team is only for paid users.
@@GreyWolfSTF Incorrect my friend you will get a response to your question at the forms. It will happen.
@@ScottFichter which forum do I post under. I've tried emailing them.
@@GreyWolfSTF No email does not work. Take time to think out your question. Provide detail, provide clarity, be positive, be humble, be detailed. forum.blackmagicdesign.com/viewforum.php?f=21