Once again a great info packed video. I've never opened a Harley motor in my 7 years of working at bikes but nice to see the workings and technology of them.
After watching this video, I got rid of my 02 Springer Heritage Softail that I had wanted for years.. More rotating mass + more chain = more chance of future catastrophic failure! I made an even trade for a 67 Electraglide in very good condition that goes with my 72. Will never own anything newer than an Evolution!
Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Slide a zip tie over tensioner with locking head facing up and out. Route tie around back and out front of assembly. When you pull tie through locking head, pull downward and this will pull tensioner back into housing. Will not only hold tensioner in retracted position, but will hold it there for reassembly.
You're very welcome! Have you subscribed yet to never miss a video? Have you seen the video playlists th-cam.com/users/conleybuiltplaylists ? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Wish you were too! Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thanks for subbing! High 5 us with a donation: www.paypal.me/how2wrench Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Good morning 🌅, I am from the future, as this was posted 8 years ago, I have a 2003 TC B Deuce, I purchased it secondhand about three months ago, , whoever had it before me hasn’t looked after it very well, and occasionally I have strange noises coming from it, I believe for the bottom end and the top end, I’ve taken it to a HD, service tech, I was hoping that they were taken it for a ride but did not, When it was running at HD, it sounded okay from what the tech was saying, it had some bad leaks from the inner primary, So I’ve actually put on a new drive belt the sprocket off the gearbox, upgraded the main shaft bearing, and removed the sleeve that old bearing used torun On, The bike has done around 50,000 miles , and I have noticed that it has got S&S G510 cams in it, But it still has got the original backplate from HD, but I can’t quite tell whether it has got the upgraded oil pump or not, And not hundred percent sure whether it’s been potted as well, to 1550, So I’m hoping that it lasts until the winter time and I’m thinking of stripping it completely, and rebuilding the engine, which will probably include a new crankshaft with Bearings, as I believe this is the year that they change the bearings on the crankshaft and cases, Will I need any specialist alignment tools? , I am thinking of purchasing a press, and at present, I do not have a major bike lift, I have one that lifts the bike off the ground, but not to be able to work on it properly, What is your thoughts, please?, Would it be better to purchase a new motor?, Or to attempt to rebuild this one, Part of my problem is that I live in France, but I am English, And cannot seem to find people that does engine work, If you could give me some advice, be very much appreciated, I’ve been watching quite a few of your territories. They do seem to be very explicit and very helpful., Thanks from France,
Great question for Shane directly! Shane spent the summer training a group of techs from GB. He expects to get across the pond later this year. We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a channel member please reply back with your TH-cam handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
anyone know where I can get the parts as shown in this video to upgrade my 2001 softail to the nipple hose clamp style oil line and eliminate obsolete o ring style
Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team. Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service. Here is how to get in! * Join here: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
No idea...but I wouldn't want to drop it on my toes....😎 Thanks for subbing! High 5 us with a donation: www.paypal.me/how2wrench Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Biggest POS to EVER come out of the Motor Company and just one of the reasons why so many have walked away from HD's. What notable "Motor Company" would put freggin tensioners inside of an engine case AND press a crank pin into their flywheels?
Pretty sure the engineers over-engineered on this one. Trying to compete with other manufacturers that make more efficient use of metal and quieter. Unfortunately I'm inside an 88b that had a front cam bearing failure. Yep, all the tensioners are well within spec, the unit was serviced regularly with hd hogwash products. Though I know everything can and will fail, cam setup in the evo made more sense. People have this pre-conceived notion that hd is great because it is American made. What I see is a corporation that lost sight of its customers wants and needs. American steel for an American rider. Something well built and reliable. It looks like a Timken bearing on the flywheel you are demonstrating with.
Thanks for commenting your expierence. Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
We've seen videos of people pulling it all out, never had a customer want to try it. You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Once again a great info packed video. I've never opened a Harley motor in my 7 years of working at bikes but nice to see the workings and technology of them.
7:30, is that passage not in the motor case on the A motors?
After watching this video, I got rid of my 02 Springer Heritage Softail that I had wanted for years.. More rotating mass + more chain = more chance of future catastrophic failure! I made an even trade for a 67 Electraglide in very good condition that goes with my 72. Will never own anything newer than an Evolution!
Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Slide a zip tie over tensioner with locking head facing up and out. Route tie around back and out front of assembly. When you pull tie through locking head, pull downward and this will pull tensioner back into housing. Will not only hold tensioner in retracted position, but will hold it there for reassembly.
Welcome to the channel and thanks for sharing!
Excellent educational series Shane, Thanks!
You're very welcome! Have you subscribed yet to never miss a video? Have you seen the video playlists th-cam.com/users/conleybuiltplaylists ?
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
That makes me like my 16 dyna better than my 10 heritage now ! At least I can see and feel when rubber mounts need replacement.
I've been wanting to do this one for awhile.
What is the purpose of the drain that is in the very bottom of the twin cam engine? on the very bottom under the cam.
The guy at the top right in the beginning of the video who yawns looks like the TH-cam motovlogger 'DoItWithDan' xD
Wow! That's interesting about the counter balancers. Thx for your videos. I wish I was in your class.
Wish you were too! Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
That counter balance is wild
Thanks for subbing!
High 5 us with a donation: www.paypal.me/how2wrench
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Yeah thats "High-Tech" alright, putting tensioners INSIDE of an engine case is GENIUS!!!!
They are deeply buried on cars and trucks, but those tensioner shoes aren't SMALLER THAN A FUCKING POSTAGE STAMP.
This is a great video, well done sir.
Thank you for the comment. See the link below for more help with your question. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Good morning 🌅, I am from the future, as this was posted 8 years ago, I have a 2003 TC B Deuce, I purchased it secondhand about three months ago, , whoever had it before me hasn’t looked after it very well, and occasionally I have strange noises coming from it, I believe for the bottom end and the top end, I’ve taken it to a HD, service tech, I was hoping that they were taken it for a ride but did not, When it was running at HD, it sounded okay from what the tech was saying, it had some bad leaks from the inner primary, So I’ve actually put on a new drive belt the sprocket off the gearbox, upgraded the main shaft bearing, and removed the sleeve that old bearing used torun On,
The bike has done around 50,000 miles , and I have noticed that it has got S&S G510 cams in it, But it still has got the original backplate from HD, but I can’t quite tell whether it has got the upgraded oil pump or not, And not hundred percent sure whether it’s been potted as well, to 1550, So I’m hoping that it lasts until the winter time and I’m thinking of stripping it completely, and rebuilding the engine, which will probably include a new crankshaft with Bearings, as I believe this is the year that they change the bearings on the crankshaft and cases,
Will I need any specialist alignment tools? , I am thinking of purchasing a press, and at present, I do not have a major bike lift, I have one that lifts the bike off the ground, but not to be able to work on it properly, What is your thoughts, please?, Would it be better to purchase a new motor?, Or to attempt to rebuild this one, Part of my problem is that I live in France, but I am English, And cannot seem to find people that does engine work, If you could give me some advice, be very much appreciated, I’ve been watching quite a few of your territories. They do seem to be very explicit and very helpful., Thanks from France,
Great question for Shane directly! Shane spent the summer training a group of techs from GB. He expects to get across the pond later this year.
We just run the social media.....Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Note: If you are a channel member please reply back with your TH-cam handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
anyone know where I can get the parts as shown in this video to upgrade my 2001 softail to the nipple hose clamp style oil line and eliminate obsolete o ring style
Yep triumph bonnies cam takes heaps of times to lineup
So when is it best to replace the plastic guides to help the chain?I'm at 42k
42,5 ! After that, every 5k. You can combine that with oil change 😊
nice vid thanks!!!
Remove the counterbalacers gives more performance?
Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team.
Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service.
Here is how to get in!
* Join here: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Does all of your videos contains a coughing guy in the background?
Yes all 800 of them.
How much does each weight weigh?
No idea...but I wouldn't want to drop it on my toes....😎
Thanks for subbing!
High 5 us with a donation: www.paypal.me/how2wrench
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Biggest POS to EVER come out of the Motor Company and just one of the reasons why so many have walked away from HD's. What notable "Motor Company" would put freggin tensioners inside of an engine case AND press a crank pin into their flywheels?
Pretty sure the engineers over-engineered on this one. Trying to compete with other manufacturers that make more efficient use of metal and quieter. Unfortunately I'm inside an 88b that had a front cam bearing failure. Yep, all the tensioners are well within spec, the unit was serviced regularly with hd hogwash products. Though I know everything can and will fail, cam setup in the evo made more sense. People have this pre-conceived notion that hd is great because it is American made. What I see is a corporation that lost sight of its customers wants and needs. American steel for an American rider. Something well built and reliable. It looks like a Timken bearing on the flywheel you are demonstrating with.
Thanks for commenting your expierence. Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Why not just eliminate all the extra weight
We've seen videos of people pulling it all out, never had a customer want to try it.
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one