At the time of video 01:26 , according to formula ; Rated power/Vin But in numbers it’s written 12 volt Your Vin value on the left is 28-36 So the current result must be less
Sir, Your videos are great they helped me alot the only con you don't explain the reason behind the things for eg. In this video why we took Repeating sequence block...i had doubt that in previous video of mppt using boost converter you used dc to dc pulse generator, also why you did modelling setting to mode trapezoidal cause in mppt boost it's duscrete type......if possible please explain the reason behind the things in short.!! Thank you.
Repeating sequence and the use of a comparator provides Highs and lows as the output. It acts as a pwm generator with a switching frequency to that of thr repeating sequence.
Hello. Thank you for the video. I tried to use 48 panels of 330W, 24 in series and 2 strings in parralel. I did all the calculations for my simulations, but something is strange. At the start the maximum power on the the display is around 1.5kW, it should be 15kW, but after some time it limits to 1kW. Can you help me to figure out the problem, please?
Hi, thanks for the video. I was trying to find really good reference for MPPT algorithm and this code helped me a lot. May i ask a basic question ? I think we used relational operator and repeating sequence for PWM signal. Because I am trying to implementation of MPPT solar charge. Could I use pulse generator instead of repeating sequence ? Im confused. Sorry. Have a healty day. Nice video.
@@TheUrbanScholar Hi, great video.. I have one doubt.. In P&O algorithm.. code line number 22 and 24, both the signs are negative.. it is different from the algorithm and doesn't make sense?? Can you please explain. Thank you
Sir when I tried to run it, an error popped up. Kindly help me with it. "Simulink cannot solve the algebraic loop containing 'aaa/PV Array/Diode Rsh/Product5' at time 0.039784 using the TrustRegion-based algorithm due to one of the following reasons: the model is ill-defined i.e., the system equations do not have a solution; or the nonlinear equation solver failed to converge due to numerical issues. "
Hello, I have a homework on DC Charging Station and Grid for Electric Vehicles. Could you please share a working video on this topic? A few months ago, I requested a cyclical (Thevenin Equivalent) simulation of the batteries of Electric Vehicles via Mail and comment. You would return on this topic, but you haven't shared a video yet. I have to prepare a homework study on these two subjects. I would be very, very glad if you could help. Thank you and have nice work.
Hi @YUSUF ERTAS and @The Urban Scholar, I'm also working on DC charging station and Grid for EV's. Can you share the files or videos regarding these topics. It would be helpful in doing my project.
Thank you so much! Sir, I am a masters degree student. I would like to Use your model for some tests... How could i reference it? Do you have some paper or anithing else? Thanks a lot!
@@TheUrbanScholar hey buddy I want to use ur project on battery charging of electric lawn mower. I can't access the file in the math works so give the file in the email address
Hello sir, could you please make a video on "Design and analysis of Grid connected photovoltaic system by using PWM techniques (Sinusoidal PWM, Third Harmonic Injection PWM & Space Vector PWM)for inverter control ?
Very much helped to my project...
Thank you very much sir
Hello sir, thanks for this video, I would like to ask you a question about the MPPT algorithm how did you choose Dmax, Dmin, Dint, and Delta
Sir in the MPPT Algorithm, in both the 22nd and 24th line, D was decremented, whether it's typo mistake or it's correct one to follow?
Great videos, helpful very much. Thanks for uploading such videos.
At the time of video 01:26 , according to formula ;
Rated power/Vin
But in numbers it’s written 12 volt
Your Vin value on the left is 28-36
So the current result must be less
Can you simulate the PMW alghoritm too ??
Sir,
Your videos are great they helped me alot the only con you don't explain the reason behind the things for eg. In this video why we took Repeating sequence block...i had doubt that in previous video of mppt using boost converter you used dc to dc pulse generator, also why you did modelling setting to mode trapezoidal cause in mppt boost it's duscrete type......if possible please explain the reason behind the things in short.!!
Thank you.
Repeating sequence and the use of a comparator provides Highs and lows as the output. It acts as a pwm generator with a switching frequency to that of thr repeating sequence.
hello sir can you help me with the topic stand alone solar charging station ?
Hello Sir
Can I get any help in the simulation of an IEEE paper"A Bidirectional contact less power transfer system with dual side power flow control"
We saw your mail! Thank you for it. Unfortunately right now we're having issues wrt time. If you have any specific doubts we'll help.
In this video, what type of mppt algorithm u use sir?
Hello. Thank you for the video.
I tried to use 48 panels of 330W, 24 in series and 2 strings in parralel. I did all the calculations for my simulations, but something is strange. At the start the maximum power on the the display is around 1.5kW, it should be 15kW, but after some time it limits to 1kW. Can you help me to figure out the problem, please?
but what about the current or voltage control of this system
Hi sir. May I ask how will the power output differ if MPPT was not used?
Hi, why do we need a unit delay?
Thank you for the video!
Your compliments are what fuel us to create more :)
Hi, thanks for the video. I was trying to find really good reference for MPPT algorithm and this code helped me a lot. May i ask a basic question ?
I think we used relational operator and repeating sequence for PWM signal. Because I am trying to implementation of MPPT solar charge.
Could I use pulse generator instead of repeating sequence ? Im confused. Sorry.
Have a healty day.
Nice video.
Yesss you am use a pulse generator.
@@TheUrbanScholar thank you so much 🙏🙏
@@TheUrbanScholar Hi, great video.. I have one doubt.. In P&O algorithm.. code line number 22 and 24, both the signs are negative.. it is different from the algorithm and doesn't make sense?? Can you please explain. Thank you
Can you explain the reason for connecting 1000 microfarad capacitor on the input side of buck converter and how to calculate its value?
Hi, were you finally able to get the answer
the display are showing as "nan" what is the solution for it?
Please do you know how to replace the battery by a direct current motor?
There are many papers related to this!
Sir when I tried to run it, an error popped up. Kindly help me with it.
"Simulink cannot solve the algebraic loop containing 'aaa/PV Array/Diode Rsh/Product5' at time 0.039784 using the TrustRegion-based algorithm due to one of the following reasons: the model is ill-defined i.e., the system equations do not have a solution; or the nonlinear equation solver failed to converge due to numerical issues. "
Open the pv array block and click on the non default tab and there you will be able to check/uncheck algebraic sum
what type of MPPT algorithm is this? thanks
We have worked on p&o and incremental conductance method
Sir, why you are giving unit delay before pv voltage and current measurement
I think because values are moving fast sometimes and slow some times so he needs unit delay block to manage the sample token
Hello sir
I can't get result output of scope for current of battery. guide me please
Hi and thank you for the video! Could someone tell me which is the problem that my battery doesn't reach SOC of 45%? it shows constantly 38.95 %.
I think because the simulation is only 10 seconds and the battery is 100 Ah and it is charging at 14 A. So it takes several hours to charge.
Hello, I have a homework on DC Charging Station and Grid for Electric Vehicles. Could you please share a working video on this topic? A few months ago, I requested a cyclical (Thevenin Equivalent) simulation of the batteries of Electric Vehicles via Mail and comment. You would return on this topic, but you haven't shared a video yet. I have to prepare a homework study on these two subjects. I would be very, very glad if you could help. Thank you and have nice work.
Hi @YUSUF ERTAS and @The Urban Scholar, I'm also working on DC charging station and Grid for EV's. Can you share the files or videos regarding these topics. It would be helpful in doing my project.
@@rajeshk1556 Have you completed the project? If yes, can you send the simulation and some information? Thank you
Can you also provide the base paper in the description?
Thank you for the video. where i can find the code used in this simulation
Thank you so much! Sir, I am a masters degree student. I would like to Use your model for some tests... How could i reference it? Do you have some paper or anithing else? Thanks a lot!
You can reference my model on Mathworks file exchange. Google Sankarshan Durgaprasad you'll find a mathworks link :)
@@TheUrbanScholar tranks a lot!
Send me also please
@@TheUrbanScholar hey buddy I want to use ur project on battery charging of electric lawn mower. I can't access the file in the math works so give the file in the email address
Hi, the battery current stayed positive despite the SOC is 100%
this simulation does not run it shows error how to cover this problem
Hello sir.. current is negative then battery no charge. So please you can find out this problem
Hello sir, could you please make a video on "Design and analysis of Grid connected photovoltaic system by using PWM techniques (Sinusoidal PWM, Third Harmonic Injection PWM & Space Vector PWM)for inverter control ?
We'll look into the specification you've told. We'll surely do a grid connected video soon
Could you please send me your mail id sir?
Mail us at howtoproject98@gmail.com
why the ampere show negative
Hello sir,
Can u provide mppt algorithm
It's there on the video! You can always find it on mathworks file exchange.
Hi sir, I hope you're doing well sir I need matlab simulation can you send me ?
Sir, can pls send the matlab stimulation
Sir thanks alot , sir please provide me the matlab function code
Not working