Very nice! It's awesome to be able to fix your own things instead of throwing them away & buying new ones. I've honestly never seen anyone here selling ceiling fan shaft replacements, probably because people here don't do as much ceiling fan repair as people over at your country. Oh, and may I have your take on Whifa DC fans? I'm going to review their BLDC ceiling & exhaust fan in a couple months, and I'm interested to hear what people in India think about that brand, as Whifa’s ceiling fan that I have already unboxed says that it's made in India
Sir, I have problem in my cg cool breeze. At 2022 I gave my coolbreeze to replace the bearing that it makes noise after replacing the bearings and using for 2 hours the coil got burnt and i again gave it so service my coolbreeze to rewind the coil at 2nd of January last year. After rewinding was completed at 3rd of February ot was working perfectly fine till last year at may month end. And we shift over to our new house I fitted my cool breeze at small bedroom at September. It was not used for 5 months unitll i found the problem that the shop keeper who service my fan kept the motor screws loose when I tight it fully it was not spinning at all and that guy punched the the shaft of the fan . And the stator was completely stuck in lower bearing and the lower cover of the fan and the stator and the bearing are shaking when I removed the upper cover that you did. The shaft is in good condition and the stator and bearing are shaking. After fitting the fan and i found that the stator was touching the rotar that it was stuck in the lower cover and it is removable rotar so I tried to remove the stator and set in the upper cover it was completed stuck also and my coolbreeze is G logo fan Plz give me solutions to fix my coolbreeze
In my practical experience, yes but since 2006 the 36" fan rotors are manufactured poorly for the Indian markets just to run 36,42" set only. You can try 42" blade for best performance.
Dada few days back i came across crompton ariyabreeze 1200mm ceiling fan, the fan was attractive and with good paint finish.blades were of sheet metal(very light in weight) and can be twisted easily.IS IT WORTH BUYING? Shopkeeper was promoting polycab charisma fan 1200mm however the paint quality was at par with crompton however the weight of motor was heavier when compared with crompton and blades were sturdy. Which one should be prefered? Ur knowledge and advice will be of great help. Happy durga puja Jai ma durga,bhaalo thaakbaen Abhijit
Polycab, V.guard makes one of the worst fans in the market. Never get convinced on shopkeeper's words. Be strong mindset. DADA U STRAIGHT GO TO SHOPKEEPER & ASK HIM TO GIVE CROMPTON HIGH SPEED HS or JURA/AURA/AVANCER. NO OTHER MODEL WHETHER ITS RIVIERA OR ARIYABRIZ. ARIYABRIZ, cool breeze, superbriz deco & similar fans are cheaply manufactured & internally the windings are of 36" suitable which company put Thin less blade angle light weight 48" blade to show rotation & practically "NO AIRFLOW". Riviera on the other hand is also similar bad product with shaft (Mechanical) problem after years of usage. Happy Durga Puja Navami ✌🏻🤝🏻
Dada how much did u pay for this fan? I did like ur room or i can say ur laboratory pls do show ur laboratory in videos(a walkthrough video). Overall a nice 👌 video
That's why I didn't buy any G logo fan....i have handlogo and box logo fans whose canopies are still good.. Box logo ones are behaving as good as new but handlogo ones obviously they are above 20 years of age that's why faded and weak but still intact..whereas G logo fans I have seen many...most of the fans are missing Canopies..specially G logo h igh breeze screw type canopy...just breaks into pieces and comes in hand..worst ever
Shafat is really a great headache , I lost one winding due overheating. Finally I decided to change the shaft. This model is gives very good service.
Proper work done, neatly explained
Thanks bro
@@SOURADEEPBISWAS..
মহালয়ায় 1 টার পর 1টা দারুন দারুন ভিডিও আসছে l প্রথমে শাশ্বতদা, তারপর আপনি l
നല്ല പുനരുദ്ധാരണ പ്രവർത്തനം, ഗംഭീരം
Thanks bro.
Also thanks to Yt translation 🌚
ধন্যবাদ সাপোর্ট করার জন্য
@@ElectroPlusSM always welcome
@@saatvikjacob5754 were you speaking Malayalam
@@GamingDude2003 yes
Excellent💯💯 work👍👏😆..................
Very nice! It's awesome to be able to fix your own things instead of throwing them away & buying new ones. I've honestly never seen anyone here selling ceiling fan shaft replacements, probably because people here don't do as much ceiling fan repair as people over at your country.
Oh, and may I have your take on Whifa DC fans? I'm going to review their BLDC ceiling & exhaust fan in a couple months, and I'm interested to hear what people in India think about that brand, as Whifa’s ceiling fan that I have already unboxed says that it's made in India
I see. BTW Never heard of that brand here in India....
Nice job 👍🏻. Explained well.
Sir, plz can you make a video about changing the wires on the coil connection?
Sir, I have problem in my cg cool breeze. At 2022 I gave my coolbreeze to replace the bearing that it makes noise after replacing the bearings and using for 2 hours the coil got burnt and i again gave it so service my coolbreeze to rewind the coil at 2nd of January last year. After rewinding was completed at 3rd of February ot was working perfectly fine till last year at may month end. And we shift over to our new house I fitted my cool breeze at small bedroom at September. It was not used for 5 months unitll i found the problem that the shop keeper who service my fan kept the motor screws loose when I tight it fully it was not spinning at all and that guy punched the the shaft of the fan . And the stator was completely stuck in lower bearing and the lower cover of the fan and the stator and the bearing are shaking when I removed the upper cover that you did. The shaft is in good condition and the stator and bearing are shaking. After fitting the fan and i found that the stator was touching the rotar that it was stuck in the lower cover and it is removable rotar so I tried to remove the stator and set in the upper cover it was completed stuck also and my coolbreeze is G logo fan
Plz give me solutions to fix my coolbreeze
Awesome repairing
1:15 sir that capacitor holder was not in correst position and it was in upside dowm fitted
I know. Later I had replaced with Crompton OEM connector getting from Crompton service center
Sir, will this 36inch fan handle with 48inch bladeset for getting 370rpm?
In my practical experience, yes but since 2006 the 36" fan rotors are manufactured poorly for the Indian markets just to run 36,42" set only. You can try 42" blade for best performance.
I purchased hs 36 instead of new improved hs24(thin motor) to replace 24 inch gm fan which is of junk do you think it is worthit?
Worth it. New hs24 thin motor is not improvement. It's downgradation of hs24 to surebreeze category mechanically.
@@SOURADEEPBISWAS didnt expect this from bethora factory of crompton as all the 24 inch hs fans are manufactured there.
Cost cutting due to steep increment of copper prices & interstate transportation is the excuse 😌
I too mostly avoid white fans as after some years they turn yellowish colour and dust too is easily visible on it.
Exactly. I feel Opal white fans are fans which only primer appied & sold to customers. Now customers job to paint the fan to their choice...
@@SOURADEEPBISWAS and they also requires a lot of maintenance also too..
@@BarshanBPal Yes. They need repainting many times.
Will u make restoration of orient summer cool which u dumped in your ss390's video, please, same as that of polar
Obviously be. Stay tuned.
@@SOURADEEPBISWAS Make it soon plz🤩
Excellent bro 👍 well explained 👌
Darun bolecho
একদম ঠিক
Nice explanation
Can you do a video on high speed Diego
Let's see
is it possible if we put HS36 motor with HS 48 blades
Absolutely possible. Also put 2.25-2.5 capacitor
The video was shoot in your workshop ?
Hm
Smartya which school are u?
Awesome bro , liked the efforts by you
Waiting for more such videos
Thanks bro
Nice😊 restoration project.
Dada few days back i came across crompton ariyabreeze 1200mm ceiling fan, the fan was attractive and with good paint finish.blades were of sheet metal(very light in weight) and can be twisted easily.IS IT WORTH BUYING?
Shopkeeper was promoting polycab charisma fan 1200mm however the paint quality was at par with crompton however the weight of motor was heavier when compared with crompton and blades were sturdy.
Which one should be prefered?
Ur knowledge and advice will be of great help. Happy durga puja
Jai ma durga,bhaalo thaakbaen
Abhijit
Polycab, V.guard makes one of the worst fans in the market. Never get convinced on shopkeeper's words. Be strong mindset.
DADA U STRAIGHT GO TO SHOPKEEPER & ASK HIM TO GIVE CROMPTON HIGH SPEED HS or JURA/AURA/AVANCER. NO OTHER MODEL WHETHER ITS RIVIERA OR ARIYABRIZ.
ARIYABRIZ, cool breeze, superbriz deco & similar fans are cheaply manufactured & internally the windings are of 36" suitable which company put Thin less blade angle light weight 48" blade to show rotation & practically "NO AIRFLOW". Riviera on the other hand is also similar bad product with shaft (Mechanical) problem after years of usage.
Happy Durga Puja Navami ✌🏻🤝🏻
@@SOURADEEPBISWAS thanks 🙏 will do the same as adviced.
Yours welcome. ✌🏻☺️
Subho Bijaya Dashami
@@SOURADEEPBISWAS shubho bijaya🙏
Awesome video
Bro is Avancer 56 available?
Yes
@@SOURADEEPBISWAS kobe aslo?
2019
@@SOURADEEPBISWAS otao ki thick 12p?
Tahle hs56 14p dhukiye dite hbe
Tomar working area ta bes bhalo, ato Crompton box ache!
Nice
I love white HS
As expected from you 😂
Why r u changing the shaft
Dropped from hand & jamming ½ the rotation sometimes & sounding
Dada how much did u pay for this fan?
I did like ur room or i can say ur laboratory pls do show ur laboratory in videos(a walkthrough video).
Overall a nice 👌 video
Just watch my EPC typhoon 18" pedestal restoration video. Some sneak peeks are there
@@SOURADEEPBISWAS thanks will definitely watch the video
Why r u not uploading videos these days
Durga puja, Dussera was there thats why busy... Some awesome videos coming soon based on my purchases...
22:01 White colour need a lot of maintenance
Exactly
This is PE branded coil
I see
Fan accelerates too fast after 2.5 mfd capacitor is connected to the fan.
That's why I didn't buy any G logo fan....i have handlogo and box logo fans whose canopies are still good.. Box logo ones are behaving as good as new but handlogo ones obviously they are above 20 years of age that's why faded and weak but still intact..whereas G logo fans I have seen many...most of the fans are missing Canopies..specially G logo h igh breeze screw type canopy...just breaks into pieces and comes in hand..worst ever
Crompton logo is worse than G logo
Crompton logo gives average quality though..but breaks....yes...worse case with after 2016 fans
কেউ এভাবে বোঝায় না!
Ovorshoi
Paint this fan brown.
Yes
@@SOURADEEPBISWAS Because you hate opal white.
Watch the video. U will understand why I hate opal white
@@SOURADEEPBISWAS This is because it gets visible dusty.
Crompton greaves ltd
2014
electro control you say g logo and crompton greaves ltd are differerent but they are the same