*Please Use Earphones for better understanding. Low Audio caused by music mix during editing.* To order 1200W Blu Ray Nano Gun in India :- Http://wa.link/qbofik To order 400W Fog Machine in India :- (Click to Order) Http://wa.link/4v9ewu
This worked for me too. Blowing and sucking in combination in the inlet tube freed the clog. Ran vinegar through once it unclogged, and now a 100% working fogger!
I have the same machine everything is ok except the engine doesn't work but when i linked it directly with 220v electricity it worked, and i just wanna know what kind of liquid i should use cuz my friend has give it to me
My unit heats up but the ready light never turns on. Pressing the button doesn't do anything. I forced liquid through with a syringe and fog did come out. I think the pump isn't activating or the machine is just not sending the ready status for the pump to to work. What can i do?
Thanks bro it works wonder. I have used your technique and removed the choke of the motor , also i had modified by using a cycle pump to release the chokeup ... Thanks again
Glad it worked and thanks for the nice idea on using a cycle pump to create more cleaning pressure. I’m adding your comment as a pinned comment so that your idea others as well. Consider subscribing the channel for useful updates like this one. Good Day ! :)
Bro plz reply🙏🙏🙏 My fog also of 400 watt same situation I opened and checked what's the problem I noticed that the motor was vibrating like same I pour fog liquid and used but it is not throwing the smoke what to do plz reply and also I cut the wire of pump I guess i have to change the motor but I seen ur video and got the problem plz reply what to do still my motor is vibrating 🙏🙏🙏
Hello dear, I have given all solutions I knew in the video itself. Please watch again carefully, I hope you find a solution. If not you can check some local electronics repair shop to find an oil pump for 600-800 ₹.
Have you tried cleaning it with the method given in video ? If its dead the first thing I would recommend is to go to a DJ / party light and sound provider and ask them if they have any spares or if they know an electrician who works on these machines.. because DJ people have been using them for years. If you don’t find it nearby buying directly from china is the only viable option as in India the replacement parts are being sold at nearly 70% the price of a new machine. From China you can buy from DHgate / Wish etc.
I have the white one , the pump is working, heating is working. But somehere in heating part it is block, and there is a strong back pressure from the heating part and the metal pipe that connect the pump to heater pops out. Is there any way to clean the heater tube or whatever it is .
I only suggest easy DIY’s as these are cheap machines. Try opening the front nozzle and use an injection or dropper and put in a few drops of white vinegar.. keep it vertical for 5-6 minutes. Now do the same from side where metal tube connects and keep the machine verticle again for 5-7 minutes. If there is any sebum or grease it will be cleared.. Now try the fogging again with vinergar + water solution. Keep the machine open and use a plier to hold the pipe in place so that it does now blow out while vinegar fogging.
I've disassembled everything and checked the pump, it's working fine and shoots out liquid when not attached to the inlet copper tube. But my clog seems to be in the heat exchange itself. The pump doesn't have enough pressure to clear the blockage. I've tried ramming a thin wire through the outlet and inlet of the exchange but no luck. Do you think this could still be a pump issue?
If liquid is coming out from the pump then the core may be jammed or dead. First check if the core is getting any hot or not. If not then take out the pump and dump the machine. If core is getting hot the you can try clearing its block by disassembling it from the body and injecting vinegar + water solution in it from one side. Keep it vertical for 10 mins then on the other side and keep it vertical again. Hopefully it will loosen the debris inside and then you can attack the pump again and fog it with vinegar water solution. Try it and let me know if it works.
Thanks. Please check the below points.. Have you opened the machine and checked the pump ? Because it still makes sound when its choked. Is the coil getting heated ? Don’t touch it directly, as its superhot. If its not getting heated the coil will need replacement or electrical checkup for wiring fault. Did you add glycerin to the solution. Without glycerin there will be no fog.
Nice video. In my case white type fogging machine is there. Since purchase it ejects only liquid. Not ejecting fog or smoke. Pls suggest the way to repair.
The nut which is connected to the steel pipe is not been full tightly, and when operated by removing the connection of steel pipe; the motor is not throughout
If the machine is working properly then indicator is not essential. You can put machine on preheat for 3-5 minutes and use. If you take notice there is also a click sound in 2-3 minutes when machine is ready for fogging.
Hi : The machine I have is one like the white one in this video. The issue with my machine is the machine is ejecting less fog and inturn machine throwing the liquid directly as a jet
If liquid comes out directly, you’re in cleanup mode.. switch to other mode. If fog is low run the machine with cleanup chemical like water & vinegar mix.
Hi.. i also have the white one. The pump is working fine, heating is fine but its is clogged in the heating part. When i try to use it , there is a back press from the heating part. How can i clean the heating tube
You can try opening the heating core and remove its pipe. Take a syringe, fill it with vinegar and push the liquid inside the tube from one side, keep it upside down for 5 minutes to let the vinegar do cleaning. Now put it upside down and repeat the process on the other side.. hopefully it will clear the choke.
Hi, I am using fumigation chemical to sanitize room, but after using for some time, my pump is not sucking up the solution I have same machine, can I use the same technique which ur showing in this video?
Fumigation chemical is not suitable for this machine. It will 100% choke the pump. You can try the method, you may need to cleanup from both sides of the pump and also if possible use a syringe for pushing in vinegar. I hope it helps.
hello sir , The day I used this machine, then I left the green light on for a very long time, so he meant very hot, then he didn't come out with smoke, can I know what's wrong? which part has broke?
Can’t be said without checking. May be the heating rod is burnt up. Its very hard to find so machine replacement may be the option. Get it checked at electrical shop. It can also be a minor electrical fault.
*Please Use Earphones for better understanding. Low Audio caused by music mix during editing.*
To order 1200W Blu Ray Nano Gun in India :-
Http://wa.link/qbofik
To order 400W Fog Machine in India :-
(Click to Order)
Http://wa.link/4v9ewu
This worked for me too. Blowing and sucking in combination in the inlet tube freed the clog. Ran vinegar through once it unclogged, and now a 100% working fogger!
Glad it worked for you.
Wow, so impressed!! Worked for me exactly as you showed!! Thank you so much!
I have the same machine everything is ok except the engine doesn't work but when i linked it directly with 220v electricity it worked, and i just wanna know what kind of liquid i should use cuz my friend has give it to me
Hi... Which one is better? The steel or the plastic?
Steel one any-day. Much more durable and convenient with the remote with a large liquid tank.
My unit heats up but the ready light never turns on. Pressing the button doesn't do anything. I forced liquid through with a syringe and fog did come out. I think the pump isn't activating or the machine is just not sending the ready status for the pump to to work. What can i do?
thanks my friend, now it's working , could you please tell me about the liquid
Check this in depth review :-
th-cam.com/video/6ByVI19bXPw/w-d-xo.html
I have the white one.. It outputs less fog.. Pump is working but have no force. What to do
Try cleanup run 2-3 times with vinegar.
Add more glycerin to the mix if you can feel good air throw pressure in front of the knob.
Thanks bro it works wonder. I have used your technique and removed the choke of the motor , also i had modified by using a cycle pump to release the chokeup ... Thanks again
Glad it worked and thanks for the nice idea on using a cycle pump to create more cleaning pressure. I’m adding your comment as a pinned comment so that your idea others as well.
Consider subscribing the channel for useful updates like this one. Good Day ! :)
Any type of glycerin? Where should I purchase?
Yes. Chemist store/ amazon
Bro plz reply🙏🙏🙏
My fog also of 400 watt same situation I opened and checked what's the problem I noticed that the motor was vibrating like same I pour fog liquid and used but it is not throwing the smoke what to do plz reply and also I cut the wire of pump I guess i have to change the motor but I seen ur video and got the problem plz reply what to do still my motor is vibrating 🙏🙏🙏
Hello dear, I have given all solutions I knew in the video itself. Please watch again carefully, I hope you find a solution.
If not you can check some local electronics repair shop to find an oil pump for 600-800 ₹.
@@DevilsAngel bro but I have cut the wire means can I ironslod that wire it will be OK or not
That’s ok you can reconnect it or get it soldered if its broken from the connection point.
@@DevilsAngel bro done the process but when I dipped it in solution and put the motor in horizontaly it was throwing less pressure whats the problem
If any fluid is coming out, you have hope. Keep using it with vinegar for 5-10 minutes. Hopefully the clog will get removed. All the best.
I have the same disinfection machine but the pump is spoiled . How can i get it in India ?
Have you tried cleaning it with the method given in video ?
If its dead the first thing I would recommend is to go to a DJ / party light and sound provider and ask them if they have any spares or if they know an electrician who works on these machines.. because DJ people have been using them for years.
If you don’t find it nearby buying directly from china is the only viable option as in India the replacement parts are being sold at nearly 70% the price of a new machine.
From China you can buy from DHgate / Wish etc.
Already cleaned but still not working . Thanks for your support
I have this unit... it won't eject smoke and motor is also no functioned... but it's pre heat the unit... ehat problem it might be my friend?
I have the white one , the pump is working, heating is working. But somehere in heating part it is block, and there is a strong back pressure from the heating part and the metal pipe that connect the pump to heater pops out. Is there any way to clean the heater tube or whatever it is .
I only suggest easy DIY’s as these are cheap machines.
Try opening the front nozzle and use an injection or dropper and put in a few drops of white vinegar.. keep it vertical for 5-6 minutes.
Now do the same from side where metal tube connects and keep the machine verticle again for 5-7 minutes. If there is any sebum or grease it will be cleared..
Now try the fogging again with vinergar + water solution. Keep the machine open and use a plier to hold the pipe in place so that it does now blow out while vinegar fogging.
@@DevilsAngel ok ill try it. Thanks bro. I'll let you know the result.
Yes!!! Now its working.... Thank you
Glad to be of assistance !
Consider subscribing for more such useful tips and tricks with everyday gadgets and utilities. :)
I've disassembled everything and checked the pump, it's working fine and shoots out liquid when not attached to the inlet copper tube. But my clog seems to be in the heat exchange itself. The pump doesn't have enough pressure to clear the blockage. I've tried ramming a thin wire through the outlet and inlet of the exchange but no luck. Do you think this could still be a pump issue?
If liquid is coming out from the pump then the core may be jammed or dead. First check if the core is getting any hot or not. If not then take out the pump and dump the machine.
If core is getting hot the you can try clearing its block by disassembling it from the body and injecting vinegar + water solution in it from one side. Keep it vertical for 10 mins then on the other side and keep it vertical again. Hopefully it will loosen the debris inside and then you can attack the pump again and fog it with vinegar water solution. Try it and let me know if it works.
Thanks from Malaysia...
Happy to assist. :)
Brother nice video. But how about if pump is working but no smoke coming out?
Thanks. Please check the below points..
Have you opened the machine and checked the pump ? Because it still makes sound when its choked.
Is the coil getting heated ? Don’t touch it directly, as its superhot. If its not getting heated the coil will need replacement or electrical checkup for wiring fault.
Did you add glycerin to the solution. Without glycerin there will be no fog.
@@DevilsAngel thanks for those points. I did what you video does. Water strongly pumps out. And heater is working and producea heat....
Do same it works really
What is the best solution used in the machine ? Is it kerosine ? Kerosine with oil ?
Readymade : Chemtex Silvox Fume + glycerine 10%.
Don’t use kerosene. It will damage the machine.
Nice video. In my case white type fogging machine is there. Since purchase it ejects only liquid. Not ejecting fog or smoke. Pls suggest the way to repair.
Toggle the Swich to the other side.
You are in cleanup mode so only liquid will come out. Check my other video on this machine for mode details..
Check if its heating if not replace your heating element
The nut which is connected to the steel pipe is not been full tightly, and when operated by removing the connection of steel pipe; the motor is not throughout
I have a questions, after doing the procedures you showed us, the solution is still not going thru if we reassemble everything
You may try with a syringe.. it will feed the chemical with some pressure.
Hey there.. i am not able to open the copper thing thats fixed on my pump.. i used plier but its not lossening.. what do i do ?
You can heat it up a bit if its not a plastic pump.
@@DevilsAngel unfortunately its a plastic pump
Any other trick ?
Do i rotate it or pull it out simply ?
Hmm, you can heat the copper part carefully with a candle bit by bit to avoid plastic part melting.
Brother I buy fog machine heat getting heat but not taking liquid into pump and somke not coming please help out this issue
Please check and try the steps given in the video.
Good job bro.. I like do DIY..
Thanks bro ! :)
Parts avilalble?
Sir I suspect my Red LED light indicator is not working properly. Have u any idea how I can procure a new one?
If the machine is working properly then indicator is not essential. You can put machine on preheat for 3-5 minutes and use.
If you take notice there is also a click sound in 2-3 minutes when machine is ready for fogging.
Hi : The machine I have is one like the white one in this video. The issue with my machine is the machine is ejecting less fog and inturn machine throwing the liquid directly as a jet
If liquid comes out directly, you’re in cleanup mode.. switch to other mode.
If fog is low run the machine with cleanup chemical like water & vinegar mix.
Hi.. i also have the white one. The pump is working fine, heating is fine but its is clogged in the heating part. When i try to use it , there is a back press from the heating part. How can i clean the heating tube
Switch to I if it throws jet on II or switch to button 2 if it throws the jet in button I.
You can try opening the heating core and remove its pipe. Take a syringe, fill it with vinegar and push the liquid inside the tube from one side, keep it upside down for 5 minutes to let the vinegar do cleaning. Now put it upside down and repeat the process on the other side.. hopefully it will clear the choke.
Hi, I am using fumigation chemical to sanitize room, but after using for some time, my pump is not sucking up the solution
I have same machine, can I use the same technique which ur showing in this video?
Fumigation chemical is not suitable for this machine. It will 100% choke the pump.
You can try the method, you may need to cleanup from both sides of the pump and also if possible use a syringe for pushing in vinegar. I hope it helps.
@@DevilsAngel then what should I use, for fumigation?
When I bought at that time company said it's suitable for such machine
Thanks bro👍
hello sir , The day I used this machine, then I left the green light on for a very long time, so he meant very hot, then he didn't come out with smoke, can I know what's wrong? which part has broke?
Can’t be said without checking. May be the heating rod is burnt up. Its very hard to find so machine replacement may be the option.
Get it checked at electrical shop. It can also be a minor electrical fault.
Very good helps
Glad the video was of some purpose to you. 😊
My machine is not ejecting fog but consuming all the solution, help please!
Repairing centre address please
Can i get coil
Try on wish or dhgate because AliExpress is banned.
Sir your repairing centre address please
Sir I don’t do repairs.
My machine is not taking in any liquid plz help...its white machine
This video is all the help I could do. Otherwise you’ll need to get it checked with an electrician.
Pump working but fog not out give me some solution?
Add glycerin to solution
Tq
My machine is not working
Please get it checked by an electrician
Motoer 18 w
Search at local electrical market. Esp those who deal with DJ sound etc as these are used as Stage fog machines from many years.