Lord you are very talented. Not only your skill to do this, you also teach us how to and I have to be grateful for that. Congrats on your creation. PD: do you have any link for the brass pieces? Thx
Thank you very much! You can find a list for all the parts on the "instructables" link in the description. The brass piece is part of the 510 connector.
Great video, Thanks for posting. only thing available in my area is disposables, but I am a crafty woodworker too so I look forward to making some of my own!
@@giant_vapor9235 Sehr Saubere Arbeit Respekt und Diesen Mod werde ich mir nachbauen Grüße Gut Dampf dir und allen anderen hier 💨💨🚭💯🤞🏻👍🏻Vape On Vape All & Save
I like the idea a lot as kind of a proof of concept and i think the wooden body turned out really pretty :-) But i'd stay away from the copper strip mechanism switching the full load. One day it may decide to weld itself to the connector. i think a simple switching FET and with a fuse for the LiPos should be mandatory for safety reasons and the cost only pennies.
Thanks! I've build several mods with Mosfets before, but I kind of like the mechnical simplicity of this type of mod. But I agree, that this increases the risk of creating a short circuit, if not handled properly.
Thanks! Actually that was one of the first things I ever built. If you visit my instagram page (@modern_crafts) and scroll all the way to the bottom to 2016, there is an organiser for attys, batteries, liquids etc. made of plywood. Somewhere in between is also a version made of acrylic with alumnium standoffs. Currently I don't plan to build any more organisers.
Thank you! So far I don't sell them. I might do some small batches of mods in the future. If I do so, I will announce it on my instagram page (@modern_crafts). However, I am not really active there at the moment.
These are 510 connectors with a hole in the middle to attach a liquid bottle from underneath. The dab pen does not have this hole. Also I don't think you will be able to remove and properly attach the 510 connector. You can get a "squonk 510 connector" from aliexpress for just 2$. While I personally use higher quality ones, the cheap ones should work just fine.
Yes, it is for 18650 batteries. I don't remember which bottle this is, but it has a diameter of 18mm and a height of 46mm (inlcuding the lid of the bottle)
Nice box...I wouldn’t mind watching you make a C-frame. It looks like I’m gonna have to make one since finding a nice one online is virtually impossible.
Thanks! Actually I built a "C-Frame" Mod using an old IStick 100 Chip a few years ago. However, I did not document the build process. I might take on the the idea of building a C-Frame Mod for a future video. But this will take some more time, since I am currently already working on a bunch of different projects.
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
You know what...you deserve to get a million subscribers
Thanks! Well, that's a loong way to go :D
@@Modern-Crafts นนน8นจ
very cool , calm , neat and tidy old school craftwork
You got me hooked mate amazing sound, mood, and the over all composition of your video
mate. Beautiful work keep it up.
You forgot a testfire man! Great work! Thinking of doing my squonk mod project.
These look insanely sick
this is solid talent if you upload more this channel will sure grow bro
Thank you! I am already working on some new projects, not just e-cigarettes but also some other projects.
@@Modern-Crafts looking forward for it bro you got a new sub for it
Lord you are very talented. Not only your skill to do this, you also teach us how to and I have to be grateful for that. Congrats on your creation.
PD: do you have any link for the brass pieces? Thx
Thank you very much!
You can find a list for all the parts on the "instructables" link in the description. The brass piece is part of the 510 connector.
Great video, Thanks for posting. only thing available in my area is disposables, but I am a crafty woodworker too so I look forward to making some of my own!
Nice work sir. Looks great!
Thanks!
very, very nice work. you sound like a german who speaks english :)
nice video and a beautiful mod ;)
Thanks!
And yes you are right, I am from germany. Unfortunately my accent is quite noticeable :D
@@Modern-Crafts gut, dann hätte ich ja doch auf deutsch schreiben können :D
@@giant_vapor9235 Sehr Saubere Arbeit
Respekt und
Diesen Mod werde ich mir nachbauen
Grüße
Gut Dampf dir und allen anderen hier
💨💨🚭💯🤞🏻👍🏻Vape On Vape All & Save
I like the idea a lot as kind of a proof of concept and i think the wooden body turned out really pretty :-) But i'd stay away from the copper strip mechanism switching the full load. One day it may decide to weld itself to the connector. i think a simple switching FET and with a fuse for the LiPos should be mandatory for safety reasons and the cost only pennies.
Thanks! I've build several mods with Mosfets before, but I kind of like the mechnical simplicity of this type of mod. But I agree, that this increases the risk of creating a short circuit, if not handled properly.
Nice little project. Would like to see you do a wooden vape stand/atty organiser if possible. Keep up the good work.. 👍🏼
Thanks! Actually that was one of the first things I ever built. If you visit my instagram page (@modern_crafts) and scroll all the way to the bottom to 2016, there is an organiser for attys, batteries, liquids etc. made of plywood. Somewhere in between is also a version made of acrylic with alumnium standoffs. Currently I don't plan to build any more organisers.
@@Modern-Crafts awesome, thanks. I'll definitely take a look..
Great video. Hope you make more
Thanks! There will definitely be more videos in the future.
What name is the centerpin body, you know-atomizer put on it
You did a Beautifull job, do you sell these ? I would be Very interested in one, I never had one made of wood, Thanks in advance
Me too!
Thank you! So far I don't sell them. I might do some small batches of mods in the future. If I do so, I will announce it on my instagram page (@modern_crafts). However, I am not really active there at the moment.
Thank you.
Very nice craftsmanship great skills! 👍👍 Wish you would have squonked it to see how good it works.✌
Super cool
Are the 510 connectors for vape mods special or can I use one that I took off of a dab pen battery
These are 510 connectors with a hole in the middle to attach a liquid bottle from underneath. The dab pen does not have this hole. Also I don't think you will be able to remove and properly attach the 510 connector. You can get a "squonk 510 connector" from aliexpress for just 2$. While I personally use higher quality ones, the cheap ones should work just fine.
Absolutely beautiful work, can I pay you to build me a mod?
Thank you! Sorry I don't sell any mods.
Very awesome!
can you please send the link of that Atomizer
Which atomizer do you mean? The red one in the intro?
Sehr gut👍
Are you still going to add the build plans in the comments?
Oh sorry, I thought I already added them. Now the URL to the build plans is in the description.
@@Modern-Crafts thank you looking forward to getting started.
can you do a boro mech?
I have a few more designs and concepts for mods in my mind. So I will probably first work on them, before starting new concepts/builds.
Is it 18650 battery? , what squonk bottle is that?
Yes, it is for 18650 batteries. I don't remember which bottle this is, but it has a diameter of 18mm and a height of 46mm (inlcuding the lid of the bottle)
Nice box...I wouldn’t mind watching you make a C-frame. It looks like I’m gonna have to make one since finding a nice one online is virtually impossible.
Thanks! Actually I built a "C-Frame" Mod using an old IStick 100 Chip a few years ago. However, I did not document the build process. I might take on the the idea of building a C-Frame Mod for a future video. But this will take some more time, since I am currently already working on a bunch of different projects.
Nice 👌
Can u make a dual 21700 box mod?
I already made a dual 18650 box mod (there is also a video on this channel). You could just use this mod as a reference and scale it up.
@@Modern-Crafts okay thanks
can i ask one of your works sir?
sorry, I don't sell these mods.
Sick
🤗 hello 👋
Niceeee!!!!
Thanks!