Man, at the start I had to pause to get my popcorn and beer again! The green Wolftick shirt is prepped for Thursday! Can’t wait to see the real-time review on these. $75 is a steal if these hold up and you’re just the person to run them through the ringer.
Well thank you!! I feel the same man, and funny you remembered! Isn't the Patreon the greatest!! LOL So happy you are representing the green baby!! Much Love WILLIAM🤘🤘🙏🍀
9:41 The white stuff on the bolt is original thread locker, I always applied Loctite 243 to cleate a bond between the threads. It's unlikely these bolts got corroded, as they are less exposed to road salt. So to do this you really have to want to make them corrode. Just in case the bolts should only be tightened enough for the brake to be secure while in use, but you should be able to knock them out of position. This is done to protect the brake, if you torque it down hard you will bend and snap brake levers. I've seen alot of ths ton kids bikes, cus bikes were assembled by summer job ppl not mechanic. Not checked. To prevent bolts from corroding you can use a bit of grease at the shim. Also Loctite protects it from corroding too. But let it cure over right. But keep in mind it turns into powder eventually afte rmany months, but Loctite works well to keep bolts secure. But don't overdo it. It will be harder to remove. But to me it seems like you overtorque the bolt. You should be able to remove these bolts with a mini ratchet.
Not sure if there was ever Loctite on there, but there was definitely corrosion. When aluminum and steel are joined together for a while plus some rain it will start to corrode.
Haha it was at our normal time. Remember we use daylight savings time so it changes every spring and fall.😆 In a side note, Jeremiah forgot and was an hour late to work🤣.
Those pads are 1000% asbestos 🤣. Wasn't expecting ol Wolfman to be talking about pinching the tip this morning lol. Pretty clean install, nice to see the GT Aggressor make an appearance.
They look like semi metallic pads to me but I don't have much experience with pads haha my codes have full metallic pads and they stop on a dime. Little bro had a good time riding this weekend. He didn't go otb and I didn't eat it on my first try with clipless pedals 😂 honestly pretty confidence inspiring for someone who's scared of jumps. You really feel locked in with them
Loop the brake hose and zip tie the sh*t out of it. Thats what I did cause I didn't want to cut my hoses either. Might be looking for a full suspension frame to build and I'll probably need the longer hoses for it haha glad the GT is getting some love. Hope those new zooms perform well! Neat to hear they work well with shimano rotors too
Dude you clueless now!! Ooh! FANCY LOL, I have thought of it but it scares me....I really don't think I could pedal with a planted foot all the time. Bit getting air would be nice with the bike stuck stuck me
That's why I put some grease on bolts, so they don't seize. Plus, I don't tight too much brake leavers and shifters, I can turn them up or down with little bit of effort. Just in case if I crash, I won't snape the levers. Considering how often you crash, you might try same tactic 😉 just don't leave it too loose, or it will move under normal riding, when braking or changing gears.
I run the brake lever on the inside of the shifter on the handle bars so my one finger can just reach it really helped me keep my other fingers out of the way😉
Love you guys's videos. But can you tell me what size Hydraulic line sleeve and Olive for the zoom brakes. And where to get them. Thank you and have a good day.
When you were showing the brake lever hitting your knuckles, that's the same problem I'm having with my Shimano MT200's. I don't know if it's because I switched from the RaceFace Half Nelson grips to some grips that are a bit more thick or if maybe I need to slide the brake lever over some, all I know is it's pretty annoying, I didn't have that problem with my Zoom brakes, and actually my Zoom brakes had the same type of lever as your Shimano MT401 levers.
@@WOLFTICKVIDEOS 🤣🤣🤣 had to color match the grips ,lol. I actually went with BW Ergo Lock 1.0 grips, they're a tiny bit thicker then the half Nelson but thinner at the inside and go wider towards the end of the bar, makes for a more comfy grip, you should give them a try, actually I'll just send you a pair, look out for them next week.
@NonLegit Nation 2 awesome man, thanks for thinking of me! Now don't hate if I don't dig 🤣🤣 Please!!! But I probably will like them if they are only slightly thicker😉 Appreciate it and please add a note if possible. Thanks again brother 🙏 also color matching is no EXCUSE!!😜
So happy you enjoyed, our patreons get a full unedited version of just about every opener we have, that was a big commented one!! LOL Wolfman Full Hot!!
Glad the hand is healing well. Those brakes look nice. I'm looking forward to the review. Next week? Anyway, make sure you wear gloves and ride safely. Well.... as safely as you can on a mountain bike trail.
For sire Lebron! Thank you forntue coffees man, it really helps 🙏 Noe gloves are a must and video should be out next week if the schedule abides, also two extra videos as well...e-bikes!🤫🤫🤫
Weird seeing zoom brakes with the levers being on the"correct" sides. My zooms had the handles opposite which drove me crazy until I sucked it up and got a hose kit so I could size the hoses and switch the hoses around
Man you are right! So happy that they are not wonky🤣🤣 Last thing I want to do is cut hoses man, it drives me nuttz. Makes for some good content but usually takes a while.
I have the zoom 2 posting and they work good however I'm not on downhills and any black diamond type trails..but was thinking of upgrading them to a more powerful bite for a bikepacking setup..hence the extra weight on the bike..thanks for video you guys rock!!!
I might have to try the zoom hb 876. The other zooms I got. I took apart. And added fluid. They work better then when I first got them. Now would I recommend them for downhill. No. Simply because ya can not feather the break. I have them on two budget bikes I have. They work. I will probably get the hb 876 for the budget bikes since it seems better. I’m gonna be spending way more money on breaks for my intense bike where ya search n search for the best deal. I’m looking for magura or trp. Have you guys used any of them ??
Funny you said the brake levers are weird I was looking at all those zoom type brake sets and was thinking the same about the levers so I said the heck with it and just ordered the zoom HB-100 Xtech calipers the other day so I can use my stock levers. they probably will work real well the full oil set up but I been happy with the HB-100's on my other bike so I think they will be good on the goose ledge X1. Nice video guy's
I want a TH-cam crossover Cyrusher XF900 build off/ build up challenge with the KevCentral TH-cam Channel. Higher end dual crown forks and 1k budget for upgrading.
The problem with other brand of brakes thats noy Shimano,if u broke a lever or Caliper u cant purchase a replacement parts,also it its difficult to repair.Thats why i install a shimano Deore brakeset (Easy to bleed, Performance and Durable).Well, brake and fork are the most important/crucial bike. upgrade.
Can you recommend a good (cheap) mechanical disk brake set? It would be a cool challenge to find a mechanical brake set that could handle the “Cat’s Meow”
Awesome video as always! I have a question about this GT. I have a GT Timberline 29" with basic parts, but I wanted to upgrade it and basically just take advantage of the frame. Can this frame handle heavier trails and small jumps (maximum of 1 meter)? And regarding the suspension, Is yours ok? I'm thinking of a Pike 130 mm (original is an XCM 28).
Hey brother, you can catch up on our videos of the GT. We have put it thru hell and back and have gotten plenty of air as well!LOL But frame is great, and the factory fork is not that great over time. I run now an x fusion, but just watch some videos brother. If you got any questions feel free.
As always thumbs up on the like button. The rap around is jank !!! What if take week break then make videos 1 part so they include the install and riding n the trail footage and scored review. Just suggesting because it would make more sense to that 1 time viewer that sees you slap on the part then hit the trails immediately to end the video with feedback. If someone isn't already following, logically it's hard to pickup on the content - but that is just my opinion and personally I like all the videos you guys put out but especially the one where you're just chilling going through the bags of DVD movies. It's wholesome for sure Peace bros
First of all, thanks man😊👍 We admittedly don't do our selves any favors by the way we do things. This channel was, is, and always will be centered around our relationship first and everything else second. We have made some changes over time that help the less interested or newer viewers, but we definitely don't follow the TH-cam trends. We have made some episodes in the past that include everything but we prefer our usual way, especially since we do two episodes a week while holding other jobs. We put 50 hours a week into our channel and it would probably take another 10 or so to make one of the episodes complete every week. We do appreciate the constructive criticism but we hope this helps you understand a little more about our stance on this. Thanks again man, and thanks for watching the DVD episodes🤣👍👍
I thought zoom discontinued the whole brake line up. I guess this is from remaining stock. But I guess these brakes are Clarks brakes so maybe they actually make them so if that's the case they might continue to be available. But ubde rzoom name they will probably be gone. But I see zoom has focused on new forks the past years. They have air forks for various uses, with adjustments. I don't know if they are junk or useable maybe something for your channel to test.
🤔I thought we have showed it in other episodes before, but maybe that was just on our Patreon.🤷♂️ Either way the opener on this episode was a edited part of a Patreon video where we show a lot more of behind the scenes. If you were a little older I would suggest you check it out, but it's a little rough with language sometimes😅.
Lever design looks similar to my tektros I've had no problem with them fairly comfy, 4pots on the gt tho definitely gonna be some big sends on the real time review 👀
You should have brake sfurthe rin to have better leverage and only us eone finger, one more tip, adjus teach so you start with tip but brake with mid bone. But those shifters might make that impossible. The ebrake are not something I would buy. But I think I will try Formula Cura 4. I think I will order a set from Geometron in UK. But these brakes proba øy cost 2 or 3 or 4 times as much.
Another great one guys that opener man I thought for sure Wolfdad was gonna hit you with a bike or whatever he had in his had at the time! Tick glad to see you healing up but on the next review suit up safety first then send that sh#t! Looking forward to the review. I was thinking on getting the Shimano 4 piston breaks that you had on the GT but I really wanna see what you think of the bucklos version performance. #wolfticknation I love the energy and see you in the next one
Thanks brother, I will suit up COMPLETELY!! LOL I may be a ball of bubble ha ha ha!!! Our patrons get to watch most of our openers unedited and full length. That was a a favorite one!! LOL See ya on the next brother 🤘
That's some great collection of the best music ever my man😆. I used to have more but my boy's took them to school for weight lifting class and left them there🤬. Damn kids are overrated😆! My DVD collection is also pretty strong and about 10 times my cd collection.
They kinda look like copies of the shimano brakes, looking forward to seeing how these perform, cheap for what they are. Make sure you wear those gloves! 😂 Great video as always Take care gents 😎👍🍺
My late dad was an irish/galician blue eyed cuban , 6' , 180 pounds of prime muscle , boxer , wrestler , jiu jitsu black belt , built like a stack of rabid cannonballs with a very short fuse ..... I just couldn't , I look like mom ; 5'8" , 155 pounds with a body like a retired tennis player . Lol .
Great question man, as many bikes as I have ridden and brake tests, not once have I had failure. Thank God!! I will tell you that will now be in the back of my head because of you!!! 🤬🤬😉
I have to chime in on this, this is the old guy. The Tick has been hit in the head alot so he forgets. He actually famously had a complete failure of his rear break and it didn't go well from there. Here is the link to that video and you might want to skip all the stuff in the beginning, so fast forward to the 12:07 mark or use the time stamps in the description. Thanks and here you go: th-cam.com/video/sLEIOoxVY_0/w-d-xo.html
I am not too sure, they have a weird punch out design, you just put pressure on the pivot point of the lever and it comes out. Curious if there are any others like that.
just so you guys know, the video thats posted in the google format doesn't allow for likes or dislikes. It makes you remember or care enough to push the YT button to view it on YT before you get any likes or possibly any views. idk. fyi.
Interested to see how they feel vs shimano 4 pots? Those levers are fricken ugly and very poor design. Isn’t the whole point of 4 pots being 1 finger braking and lots of power? Why do you need to put your whole hand on brake lever? Almost as ugly as that stem that came on XR pro. Always nice to see the GT!
😉🤣🤣🤣🤣 Man you are so right!! And the stem comment too! LOL WOW thanks for the laughs 😅 We will see ya on the next brother, thay makes so much sense, why have a foot long lever for a 1 finger brake🤔🤔
Brakes look like they will be good stoppers but you are right. That lever shape is Whack! Even the tektro levers have a bend for that one finger action!!!
I can't believe you wrapped the back brake line like that. The line should be trimmed to length, and after reconnecting; bleeding would be addressed. I'll look elsewhere, I guess...
Just use the shimano lever on the zoom's 🤯 prob the cheapest pads u can find on aliexpress. Old man if he gives u shit in the photo shoot just kick him in the 🐈
kinda wonder what goes in in the mind of their design team... "lets build a really good brake and offer it at great $ value but then use the worst lever possible"
![[UNCUT] เก็บ "สจ.โต้ง" เอี่ยวมาเฟีย รู้ตัวคนบงการ ก่อนสั่งลั่นไก I คนดังนั่งเคลียร์ I 13 ธ.ค.67](http://i.ytimg.com/vi/o-J_p62D40w/mqdefault.jpg)
Man, at the start I had to pause to get my popcorn and beer again! The green Wolftick shirt is prepped for Thursday!
Can’t wait to see the real-time review on these. $75 is a steal if these hold up and you’re just the person to run them through the ringer.
Well thank you!! I feel the same man, and funny you remembered! Isn't the Patreon the greatest!! LOL So happy you are representing the green baby!! Much Love WILLIAM🤘🤘🙏🍀
@@WOLFTICKVIDEOS Patreon is the best! Cliffhangers and all!
Im so glad you happy guys have that to test on. ❤️💪
Gonna be good man, thanks brother🤘🤘🤘
Great price for hydraulic brakes.
Glad to see the GT Aggressor PRO back on the channel
Man they look the part!! Let's see how they do!!! The GT is always welcome around here 😉
Really looking forward to seeing how these turn out.
Us too Wes, gonna be a good one man. I just said how interested in is at well. See ya on the next and man thank you for the coffees brother 🙏
9:41 The white stuff on the bolt is original thread locker, I always applied Loctite 243 to cleate a bond between the threads.
It's unlikely these bolts got corroded, as they are less exposed to road salt. So to do this you really have to want to make them corrode.
Just in case the bolts should only be tightened enough for the brake to be secure while in use, but you should be able to knock them out of position. This is done to protect the brake, if you torque it down hard you will bend and snap brake levers. I've seen alot of ths ton kids bikes, cus bikes were assembled by summer job ppl not mechanic. Not checked.
To prevent bolts from corroding you can use a bit of grease at the shim. Also Loctite protects it from corroding too. But let it cure over right. But keep in mind it turns into powder eventually afte rmany months, but Loctite works well to keep bolts secure. But don't overdo it. It will be harder to remove. But to me it seems like you overtorque the bolt. You should be able to remove these bolts with a mini ratchet.
Not sure if there was ever Loctite on there, but there was definitely corrosion. When aluminum and steel are joined together for a while plus some rain it will start to corrode.
Cool, an early video 👍
Haha it was at our normal time. Remember we use daylight savings time so it changes every spring and fall.😆
In a side note, Jeremiah forgot and was an hour late to work🤣.
@@WOLFTICKVIDEOS we don't spring forward until the 27th.
Those pads are 1000% asbestos 🤣. Wasn't expecting ol Wolfman to be talking about pinching the tip this morning lol. Pretty clean install, nice to see the GT Aggressor make an appearance.
Haha apparently it didn't always work 🤣.
@@WOLFTICKVIDEOS Nope, not 100% effective lol
My 2021 Trance comes with MT4200s/180 mm and they are brutally effective .
I bet, Shimano got some great stopping power.
6:40 🤣 "just pinch the tip and pull it off" way to use that rubber knowledge Wolfdad lol
😂😂😂😳🤦♂️🙏
Nice screwdriver extraction method - not seen that before - especially without cutting slots in the bolt
Thank you Sir!! We try to be practical. I was thinking grinder but the screw was a little recessed.
@@WOLFTICKVIDEOS Woah!!! A grinder…. Maybe a little too aggressive…
They look like semi metallic pads to me but I don't have much experience with pads haha my codes have full metallic pads and they stop on a dime. Little bro had a good time riding this weekend. He didn't go otb and I didn't eat it on my first try with clipless pedals 😂 honestly pretty confidence inspiring for someone who's scared of jumps. You really feel locked in with them
Loop the brake hose and zip tie the sh*t out of it. Thats what I did cause I didn't want to cut my hoses either. Might be looking for a full suspension frame to build and I'll probably need the longer hoses for it haha glad the GT is getting some love. Hope those new zooms perform well! Neat to hear they work well with shimano rotors too
Dude you clueless now!! Ooh! FANCY LOL, I have thought of it but it scares me....I really don't think I could pedal with a planted foot all the time. Bit getting air would be nice with the bike stuck stuck me
I anxious to see how they perform. Love how you added in the coffee round up this vid good sheit! 👍 👍
IRISH!! us too brother. Thanks for the comment and not hating on the shoutouts. Much love and see ya Friday!
What's up everyone on Wolftick ❤️
🙏
Wrap th we brake line around the base of the stem a couple times.
Not a bad idea, the bar works for now and should be a good spot hopefully for a quick downhill😉
That's why I put some grease on bolts, so they don't seize. Plus, I don't tight too much brake leavers and shifters, I can turn them up or down with little bit of effort. Just in case if I crash, I won't snape the levers. Considering how often you crash, you might try same tactic 😉 just don't leave it too loose, or it will move under normal riding, when braking or changing gears.
😉😉 Man you actually like i crash a lot!! LOL Appreciate the input and i will pit a tad bit of grease Mario, thanks brother.
They look pretty good and will look even better with the hoses trimmed up! The price is good considering the market these days! Nice review!
Thanks brother, realtimes gonna rock!! Hopefully they stop me 😳 And when they find a home, the hose will be cut! Lol
Wrap the brake around the head tube kinda like a dirt jumper that someone barspins
Thanks for the input man, appreciate that and maybe I could do bar spins too?🤣🤣😉
Great video guys
Thank you Brendan👍
I run the brake lever on the inside of the shifter on the handle bars so my one finger can just reach it really helped me keep my other fingers out of the way😉
Appreciate the input brother, you know i thought of that afterwards but worried about being able to reach lol. Thank You
Love you guys's videos. But can you tell me what size Hydraulic line sleeve and Olive for the zoom brakes. And where to get them. Thank you and have a good day.
Hey brother, thanks for the comment and here is an affiliate link- THE BH59
amzn.to/3qdLLu7
Nice to see you and your dad getting on so well lol hope the brakes work when you go out and wear gloves to be safe
🤣 For sure man! Thanks Clive👍
When you were showing the brake lever hitting your knuckles, that's the same problem I'm having with my Shimano MT200's. I don't know if it's because I switched from the RaceFace Half Nelson grips to some grips that are a bit more thick or if maybe I need to slide the brake lever over some, all I know is it's pretty annoying, I didn't have that problem with my Zoom brakes, and actually my Zoom brakes had the same type of lever as your Shimano MT401 levers.
Wow, what a surprise.....Let me tell you were you first went wrong, TAKING OFF YOU HALF NELSONS!!!🤬
@@WOLFTICKVIDEOS 🤣🤣🤣 had to color match the grips ,lol. I actually went with BW Ergo Lock 1.0 grips, they're a tiny bit thicker then the half Nelson but thinner at the inside and go wider towards the end of the bar, makes for a more comfy grip, you should give them a try, actually I'll just send you a pair, look out for them next week.
@NonLegit Nation 2 awesome man, thanks for thinking of me! Now don't hate if I don't dig 🤣🤣 Please!!! But I probably will like them if they are only slightly thicker😉 Appreciate it and please add a note if possible. Thanks again brother 🙏 also color matching is no EXCUSE!!😜
3:48 caliper looks just like the M4 or the Tektro Orion
Very similar, all but the levers and bleed port I believe..... But I gotta take another look👍👍
Great content. Excited to see how these compare to the shumano 420 and the merocas
Thanks man, we enjoyed the install too, I am looking forward to this brake more then any other!!
Yes boys, great video and that intro 😂
So happy you enjoyed, our patreons get a full unedited version of just about every opener we have, that was a big commented one!! LOL Wolfman Full Hot!!
Glad the hand is healing well. Those brakes look nice. I'm looking forward to the review. Next week? Anyway, make sure you wear gloves and ride safely. Well.... as safely as you can on a mountain bike trail.
For sire Lebron! Thank you forntue coffees man, it really helps 🙏 Noe gloves are a must and video should be out next week if the schedule abides, also two extra videos as well...e-bikes!🤫🤫🤫
Weird seeing zoom brakes with the levers being on the"correct" sides. My zooms had the handles opposite which drove me crazy until I sucked it up and got a hose kit so I could size the hoses and switch the hoses around
Man you are right! So happy that they are not wonky🤣🤣 Last thing I want to do is cut hoses man, it drives me nuttz. Makes for some good content but usually takes a while.
Put some vernier calipers on the outside housing and pull the lever, get back to me if they flex a mm
👍
Any more XR Pro videos coming?
Man not too sure, possibly coming up soon with this weather and season coming in!!
I have the zoom 2 posting and they work good however I'm not on downhills and any black diamond type trails..but was thinking of upgrading them to a more powerful bite for a bikepacking setup..hence the extra weight on the bike..thanks for video you guys rock!!!
You are welcome brother. The regular zooms are not bad, let's see if these can stop me!! May be good for you back biking bike!
But the most important question, do the brake pads fall out of the calipers when half worn like zooms mechanical calipers?
Interesting..... We shall see
I like the 2 finger lever on the 2 pistons better but the master cylinder does look a bit nicer
I agree man, thanks Peter see ya Friday👍
Will the real-time review come out on Friday
Most likely next week....
Have you tried putting the H03C brake pads (with cooling fins) ? Since they kinda similar
I might have to try the zoom hb 876. The other zooms I got. I took apart. And added fluid. They work better then when I first got them. Now would I recommend them for downhill. No. Simply because ya can not feather the break. I have them on two budget bikes I have. They work. I will probably get the hb 876 for the budget bikes since it seems better. I’m gonna be spending way more money on breaks for my intense bike where ya search n search for the best deal. I’m looking for magura or trp. Have you guys used any of them ??
Not yet, but we hear we need to!! I am so looking forward to trying these and getting a true feel for a bike that I know. Thanks man
Funny you said the brake levers are weird I was looking at all those zoom type brake sets and was thinking the same about the levers so I said the heck with it and just ordered the zoom HB-100 Xtech calipers the other day so I can use my stock levers. they probably will work real well the full oil set up but I been happy with the HB-100's on my other bike so I think they will be good on the goose ledge X1. Nice video guy's
Thanks brother, the hbs are fine enough for stopping power. They should suit you well, good choice 👌
you could just wrap the back cable around the stem once
if you take the front brake off you can do bar spins too haha
Lol yeah, bar spind do not need to be my thing!! LOL
Budget handlebars shootout? Great content! 👍
Not a bad idea man, I kinda like that. We have had a pair bend.....Hmmmmmmm Thank you for the coffee as well man, it means alot.
I want a TH-cam crossover Cyrusher XF900 build off/ build up challenge with the KevCentral TH-cam Channel. Higher end dual crown forks and 1k budget for upgrading.
🤔🤣🤷♂️
Curious to dee how they fare. For the levers i'd try to run them more Toward the center.
Gotcha man, maybe on the inside of the shifter might help. 😉 Hey brother, thanks again for the coffees, it means a lot to us.
@@WOLFTICKVIDEOS haha no problem, looking forward the review
Curious on how it compares to the meroca m4. Since both are budget 4 piston brakes.
Curious too, they look pretty similar except the levers and bleed port.
The problem with other brand of brakes thats noy Shimano,if u broke a lever or Caliper u cant purchase a replacement parts,also it its difficult to repair.Thats why i install a shimano Deore brakeset (Easy to bleed, Performance and Durable).Well, brake and fork are the most important/crucial bike. upgrade.
You are exactly right Migo, the Shimano stuff is easier to find and repair. But let's see how these things do!! See ya Friday Migo👍
Can you recommend a good (cheap) mechanical disk brake set? It would be a cool challenge to find a mechanical brake set that could handle the “Cat’s Meow”
Feel ya man, we have an hb 100 review?? It's mechanical/hydraulic...
Awesome video as always! I have a question about this GT. I have a GT Timberline 29" with basic parts, but I wanted to upgrade it and basically just take advantage of the frame. Can this frame handle heavier trails and small jumps (maximum of 1 meter)? And regarding the suspension, Is yours ok? I'm thinking of a Pike 130 mm (original is an XCM 28).
Hey brother, you can catch up on our videos of the GT. We have put it thru hell and back and have gotten plenty of air as well!LOL But frame is great, and the factory fork is not that great over time. I run now an x fusion, but just watch some videos brother. If you got any questions feel free.
Pinching the tip always gets it moving
I just bought zoom 4 piston hydraulic brakes on amazon under a different name. Think mine are the same as these? They call them zm3000
They may be man, that is a real trend....
Are they the same piston size? Or they are designed in different size for a better handle feeling?
The caliper and the master cylinder looks like a replica of tektro orion 4p brakes. The lever is different
Hmmmm......Budget MTB said the same thing. Interesting, I am looking forward to them 😀
As always thumbs up on the like button. The rap around is jank !!! What if take week break then make videos 1 part so they include the install and riding n the trail footage and scored review. Just suggesting because it would make more sense to that 1 time viewer that sees you slap on the part then hit the trails immediately to end the video with feedback. If someone isn't already following, logically it's hard to pickup on the content - but that is just my opinion and personally I like all the videos you guys put out but especially the one where you're just chilling going through the bags of DVD movies. It's wholesome for sure Peace bros
First of all, thanks man😊👍 We admittedly don't do our selves any favors by the way we do things. This channel was, is, and always will be centered around our relationship first and everything else second. We have made some changes over time that help the less interested or newer viewers, but we definitely don't follow the TH-cam trends. We have made some episodes in the past that include everything but we prefer our usual way, especially since we do two episodes a week while holding other jobs. We put 50 hours a week into our channel and it would probably take another 10 or so to make one of the episodes complete every week.
We do appreciate the constructive criticism but we hope this helps you understand a little more about our stance on this.
Thanks again man, and thanks for watching the DVD episodes🤣👍👍
Looks pretty much like rebranded Meroca M4's which are rebranded Clarks M4's
Very similar, all but the levers and bleed port I believe.....But let's hope they stop me!!
How about a GT Aggressor Pro meet up in Bentonville AR June 17th-ish ? Ha Ha Ha
Man we do need to do a wolftick meet up at the Cats Meow!!
I thought zoom discontinued the whole brake line up. I guess this is from remaining stock. But I guess these brakes are Clarks brakes so maybe they actually make them so if that's the case they might continue to be available. But ubde rzoom name they will probably be gone. But I see zoom has focused on new forks the past years. They have air forks for various uses, with adjustments. I don't know if they are junk or useable maybe something for your channel to test.
Man from what we know they are going strong. These seem to be the newer variety....
If Mr John Cullum ( the Wolfman ) runs for office , I would campaign and vote for him .
🙏😜
Never seen other angles of the shop
🤔I thought we have showed it in other episodes before, but maybe that was just on our Patreon.🤷♂️ Either way the opener on this episode was a edited part of a Patreon video where we show a lot more of behind the scenes. If you were a little older I would suggest you check it out, but it's a little rough with language sometimes😅.
@@WOLFTICKVIDEOS how do you know my age? Are you the FBI????
Lever design looks similar to my tektros I've had no problem with them fairly comfy, 4pots on the gt tho definitely gonna be some big sends on the real time review 👀
Will be done man, I hope they stop me! We will see brother, catch you on the next one. Appreciate your loyalty man
You should have brake sfurthe rin to have better leverage and only us eone finger, one more tip, adjus teach so you start with tip but brake with mid bone. But those shifters might make that impossible. The ebrake are not something I would buy. But I think I will try Formula Cura 4. I think I will order a set from Geometron in UK. But these brakes proba øy cost 2 or 3 or 4 times as much.
😳 damn that is expensive!! LOL Appreciate the tips as always Johannes
$75 for those is a steal. hopefully the realtime is a success. wear your gear in case they are grabby!
Haha I will make sure he wears gloves and elbow and knee pads as well as his helmet. 😆🤪 ⛑
Thanks for the care and support🥰
Another great one guys that opener man I thought for sure Wolfdad was gonna hit you with a bike or whatever he had in his had at the time! Tick glad to see you healing up but on the next review suit up safety first then send that sh#t! Looking forward to the review. I was thinking on getting the Shimano 4 piston breaks that you had on the GT but I really wanna see what you think of the bucklos version performance. #wolfticknation I love the energy and see you in the next one
Thanks brother, I will suit up COMPLETELY!! LOL I may be a ball of bubble ha ha ha!!! Our patrons get to watch most of our openers unedited and full length. That was a a favorite one!! LOL See ya on the next brother 🤘
@@WOLFTICKVIDEOS 🤣🤣🤣
Are those CD or DVD's?
That's some great collection of the best music ever my man😆. I used to have more but my boy's took them to school for weight lifting class and left them there🤬. Damn kids are overrated😆!
My DVD collection is also pretty strong and about 10 times my cd collection.
They kinda look like copies of the shimano brakes, looking forward to seeing how these perform, cheap for what they are. Make sure you wear those gloves! 😂
Great video as always
Take care gents 😎👍🍺
A little copieish! Lol Globes will be worn, and always appreciate ya brother. 😉
My late dad was an irish/galician blue eyed cuban , 6' , 180 pounds of prime muscle , boxer , wrestler , jiu jitsu black belt , built like a stack of rabid cannonballs with a very short fuse ..... I just couldn't , I look like mom ; 5'8" , 155 pounds with a body like a retired tennis player . Lol .
🤣🤣🤣Your dad sounds like WOLFMAN!!! And your built like an old tennis player! LOL
Hey tick u ever have full brake failure , with hydraulic brake system or cable , if so can u do vid on that , maybe test it , lol
Great question man, as many bikes as I have ridden and brake tests, not once have I had failure. Thank God!! I will tell you that will now be in the back of my head because of you!!! 🤬🤬😉
Make sure ur padded up , and gloves , lol , I be watchin , lol
I have to chime in on this, this is the old guy. The Tick has been hit in the head alot so he forgets. He actually famously had a complete failure of his rear break and it didn't go well from there. Here is the link to that video and you might want to skip all the stuff in the beginning, so fast forward to the 12:07 mark or use the time stamps in the description. Thanks and here you go: th-cam.com/video/sLEIOoxVY_0/w-d-xo.html
Zoom lol if the fail that's exactly what you'd be doing! Love the name!
🤣🤣 Man I really hope not!!
Can you not just swap off the levers?
I am not too sure, they have a weird punch out design, you just put pressure on the pivot point of the lever and it comes out. Curious if there are any others like that.
97 Canadian Kopex. Not bad. But do they actually have 4 moving pots?
We will see on the next video man, pretty sure they do, but we will confirm it for the realtime review.
I’m assuming you do wrestling or mma, because of the ears?
🤣🤣🤘 Yes and I am currently a coach, i teach all no gi jiu jitsu.
It looks almost identical to MEROCA M4.
Very similar, all but the levers and bleed port I believe.....
6:45 lol
Knew you would catch that too!! LOL
He wasn't looking for oil in the box he thought there was beer in there
🤣🤣🤣 Oh My God you are so right!!! LOL
just so you guys know, the video thats posted in the google format doesn't allow for likes or dislikes. It makes you remember or care enough to push the YT button to view it on YT before you get any likes or possibly any views. idk. fyi.
I have the Zoom HB-875 multi color Breaks single piston and i find they work better the the Zoom 4 piston but thats just me..
Home Depot has better riding gloves than any bicycle store ..... Word .
HA ha i could see that, a little Mechanix gloves.
Interested to see how they feel vs shimano 4 pots? Those levers are fricken ugly and very poor design. Isn’t the whole point of 4 pots being 1 finger braking and lots of power? Why do you need to put your whole hand on brake lever? Almost as ugly as that stem that came on XR pro. Always nice to see the GT!
😉🤣🤣🤣🤣 Man you are so right!! And the stem comment too! LOL WOW thanks for the laughs 😅 We will see ya on the next brother, thay makes so much sense, why have a foot long lever for a 1 finger brake🤔🤔
2:15 lol
New you would catch that, Lol
Brakes look like they will be good stoppers but you are right. That lever shape is Whack! Even the tektro levers have a bend for that one finger action!!!
Man they seem chincy, hope they do well on the trails. Stopping is always a good thing lol. Thanks brother
Look same as Meroca
Very similar, all but the levers and bleed port I believe.....
First 🥇
🏆🥇👍
I can't believe you wrapped the back brake line like that. The line should be trimmed to length, and after reconnecting; bleeding would be addressed. I'll look elsewhere, I guess...
First
🥈
Just use the shimano lever on the zoom's 🤯 prob the cheapest pads u can find on aliexpress. Old man if he gives u shit in the photo shoot just kick him in the 🐈
Semi metallic pads
🤣🤣🤣🤣🤣 Love that you actually answered the pad question after all that.
do a givaway
We used to do alot of giveaways but it was too hard to get people to claim their prizes. What would you want to be given away?
kinda wonder what goes in in the mind of their design team... "lets build a really good brake and offer it at great $ value but then use the worst lever possible"
🤣🤣🤣 YES!! That is exactly what the ad said!! LOL
4ur bike vids I'd like 2giv u my salsa and pickle recipes
First
Like 6th😆