How to Open Hot Wheels Rivets

Welcome to the TolleGarage Channel.
This video contains how to open the Hot Wheels rivet using a drill. And reassemble it using 2mm bolts.
Enjoy watching...and thank you for subscribe, comment and share this channel.
Music:
• Leavin by MK2 (intro)
• Sunny Morning by Bruno E
#tutorial #hotwheels #openhotwheels #tollegarage #howto #diy

[@king_h.3826]

I was searching for this type of video for years and finally I found it. I am just student and I cannot afford mini drill also so it means I just need to buy 1 bit and that's all 😁 thankyou very much bro. I have also watched your all other videos and they were also soo much inspiring to me. Thankyou again and may God bless you.

[@TolleGarage]

Thank you my friend 🙏😊 and have fun with your custom project....God Bless U

[@ikupreza]

currently i am restoring a ferrari FF, this helped

[@TolleGarage]

Thank you 🙏😊 have fun with your ferrari

[@yuliyatkach]

This makes me want to do custom cars I’m a hotwheels Collector

[@TolleGarage]

Yesss...you can do it 😊😊😊

[@yuliyatkach]

Yo I’m so going to try I’m a small Car youtuber and this would mean so much if you can subscribe!

[@owenvieira3547]

Same

[@unblvblystpd]

I’m also a collector, how many cars do you have?

[@rangermilitary8330]

I’m customizing my Aventador with a liberty walk

[@colinbowers8813]

This has been said already, but after watching just two of your videos I can't thank you enough for the content! This gives me some confidence in a future custom!

[@TolleGarage]

Thank you so much my friend 🙏🙏😊 it's a huge complement for me 🙏🙏😊

[@MrPazzu67]

Finally someone that explains well!!
Great job!!👍👍👏👏

[@TolleGarage]

Thank you and have fun 😊

[@Lu-KN]

The cleanest way to remove rivets I've ever saw!

[@MicahPotts]

I wouldn't be mad if you had more tutorials like this. THANK YOU!

[@TolleGarage]

I will try to make others...thank you

[@MicahPotts]

Thank you!

[@YuvrajSingh-sw2sq]

Best tutorial for beginners.👍

[@TolleGarage]

Thank you :)

[@valalinarsoligam4056]

I think I found the cheapest and cleanest video tutorial in youtube! Thanks man!

[@TolleGarage]

You are welcome

[@rm9600]

Thanks for the video it would be helpful to my old HotWheels

[@TolleGarage]

You are welcome 😊

[@synkrw]

Great video! Thank you!

[@TolleGarage]

Thank you 🙏😊

[@Elmoisi25]

Thanks very helpful

[@ignaciomarin5509]

Thanks for your video s are so cool

[@Banditheeler80s]

Thank you mate. I almost dill the base thanks mate

[@mr_john_eats_toes]

Can't wait to make my own custom HW car 🔥🔥

[@Denis9ROCKSTAR]

This is just what i needed to see! Great video

[@TolleGarage]

Have fun with your project

[@HHW247]

Thank you for the tips in the video man thank you for sharing from California a huge hello for you

[@TolleGarage]

Thank you so much my friend 🙏😊 warms greetings from Jakarta.

[@Kris-qq4kc]

Very detailed tutorial

[@TolleGarage]

Thank you 🙏😊

[@SRCW-pi8pj]

Very helpful thank you

[@TolleGarage]

Glad it was helpful!

[@nerdyriprod2477]

Hey, I guessed your flaming metalflake blue '67 Shelby GT-500 is your test car to opening up the rivets. Thanks a lot!

[@trentonmoonias239]

Thank you.

[@sahilraje3082]

Awesome! Thanks a lot!

[@TolleGarage]

Thank you 🙏🙏😊

[@claytonthomas1980]

Love the tutorial,now it will be easy for those people that want to do it and follow it step by step perfectly, good to go and keep it up.

[@TolleGarage]

Glad it was helpful!

[@TKsibs]

Ty for showing makes me wanna do it to my hotwheels

[@TolleGarage]

Have fun 👍

[@tnseg_art8970]

This really helped me

[@TolleGarage]

🙏🙏😊

[@ShawnStafford-1978]

I noticed that some drill bits are either not wide enough, or too big on some vehicle's. I prefer to use screws to reassemble afterward. They look better.

[@jvc-1241]

Exelent job Amigo.Thx a Million

[@TolleGarage]

Glad it can help 😊

[@owenvieira3547]

Very helpful

[@TolleGarage]

Thank you 🙏😊

[@yosoyballito]

Finally!!!! Thanks Bro!!

[@TolleGarage]

Enjoy!

[@frankchambers8101]

Finally someone who doesn't just squirt super glue in the rivet holes.

[@theredshift180sx]

I use to work as aerospace production and we'd use this technique for removing faulty rivits

[@wyattdavis1292]

I always used JB Weld before but this works better because you can take it back apart later if you want to.

[@wxlfer]

THABK YOU SO MUCH! I'VE LOOKING FOR VIDEOS LIKE THIA BUT NONE OF THEM WERE GOOD, THIS IS AMAZING ITS GONNA HELP ME SO MUCH WHEN I WANT TO CUSTOMIZE MY FIRST HOT WHEEL! THANK YOU SO MUCH, YOU EARNED A SUB!!! 👍👍👍👍👍

[@TolleGarage]

Thank you my friend 🙏😊

[@KeiGarage]

Yeahhhh. Thank you.

[@TolleGarage]

You are welcome 😊

[@shiro_kurumba]

Thanks bro

[@samcha-rc7525]

Cool !

[@TolleGarage]

Thank you 🙏😊

[@onechannel22]

Cool👍👍👍👍

[@rubydhillon4216]

Nice

[@deadlykilerbs3669]

Even though it's 2 years old, but still helpful for beginner like me :D

[@TolleGarage]

Glad to know that

[@MaidenNZ76]

Niiiiiiiice!!!!!!! 😊😊😊😊😊😊

[@bandidodelcaminodiecast]

Awesome

[@TolleGarage]

Thank you

[@ninthwisnu1995]

Makasih infonya

[@MoNady-vj1db]

I Really like Watching these videos They inspired me to do custom Hws and could you please do a custom Triumph TR6 or a Honda Civic SI

[@TolleGarage]

Have fun with your project 😊

[@colonelburton8451]

Thanks, I'm remodeling some cars for the Gaslands tabletop, so I needed to know how to carefully remove the chassis for aging, painting and modding. I think I will be using superglue to reconnect, though.

[@TolleGarage]

You are welcome!

[@literacylabyrinth4018]

I need to customise some cars doing this.

[@anhquanleba833]

I think commenting on your very first video won't be a way to receive an answer. But I think this is a video with best editing you've ever made so I just wanna ask that what software did you use to create those nice graphics and subscriptions??
Hope you will answer! And just want to say that I love your works and please keep doing them!!

[@TolleGarage]

Thank you so much my friend 🙏😊
I use premiere pro to edit my videos.

[@sumblwnup8695]

They should make them like this from factory. Even if it mean paying the full dollar for one

[@andyxblack3498]

I guess it wouldn't be safe for kids

[@rangelryapov258]

Very useful video! Thank you! I was wondering do you use mask while drilling?

[@TolleGarage]

Sometimes

[@marlogarciaii553]

Orayt!!,🤘, all videos are awesome, bro, may I ask, what kind of paint do you use?, for the body and details (lamps, etc), Tnx

[@TolleGarage]

Thank you my friend 🙏😊
Just aerosol pray paint in can

[@Noobie-qy7ov]

Thnx I was wanting to repair my Chevrolet
It has a dent

[@blueguy6575]

I wish I could do the same things! I love cars!

[@TolleGarage]

Just start to try it my friend 😊 everything is start from our love to cars, about how to do...we can learn ✌️😎

[@Sidecharacter1912]

You turned into yoda1!!1!1!11!

[@kidmarceaux]

Anyone have a good link to the bolts used to finish the car? Thanks.

[@pacmechoroni]

👍👍

[@GregPatrickOnline]

Great tutorial, where do I purchase one of those manual drills?

[@TolleGarage]

Thank you Greg. Maybe you can find it on ebay

[@skycams5508]

Berguna banget ini

[@TolleGarage]

Trims om 🙏😊

[@loucontino4804]

Only thing I would recommend is Dry Lube on the bits & the posts when tapping. There is a heat build up that can cause damage to the chassis (especially plastic), diecast post and the bits themselves. Use the oil it's a cleaner job.

[@TolleGarage]

Thank you for your inputs 😊

[@randomyt666]

Hopefully this works. I have around 10 cars with bent axles and need to fix them. I have around 200 vehicles and have been collecting since I was 4. A decade later, I have A LOT of cars.

[@TolleGarage]

I have a new video for you...about wheel swap. I will upload it soon.

[@chasefamilyracing8008]

Great video! Question: How come you use the 10 mm bolt to make threads and then the 6mm and not just use the 6mm screw right from the begining and be done?

[@TolleGarage]

Thank you my friend.
Oh, that is because my 10mm bolt is stronger than my 6mm

[@theonemasterwarhero]

I have a couple of HW retro entertainment Deloreans...I'd like to get the rivets off so I can put screws in which would allow me personalisation to swap the chassis on the cars and get in them if I needed to...though I'd like a professional job done on them (not by an amateur like me) if I could pay someone for the work.

[@ThatKidToco]

Need more vids

[@pattysrpfilms7896]

Do you have any videos on how to do a widebody kit and stance and put new wheels on and all that stuff

[@TolleGarage]

Not yet my friend, but you can see every process in my custom video.

[@lincolnminor4665]

What would it cost to do a car for somebody because your work is absolutely amazing. 🤯 Now I can't wait to do my own project.

[@TolleGarage]

Thank you my friend 🙏😊
It's depends

[@lincolnminor4665]

@@TolleGarage What about something like that gt 500 super snake you did??

[@mac371]

I just have the 3.0mm drill bit so can i use it to open the rivet ?

[@TolleGarage]

Yes, you can use it

[@robertf1208]

I’ve just recently tried doing these steps but I feel like I’m doing something wrong. I’ve used the exact same tools and screws. After I drill using the 1.8 mm drill bit, the screws just seem to just go straight down. Meaning it doesn’t screw in or tighten. Any advice will help. Thanks.

[@TolleGarage]

Maybe when you drilled in with 1.8mm, your hand little bit shaky

[@yannz_zyo]

next konten mustang gt most wanted

[@heeilyuh]

can you also use an electric drill for the 3.5mm part?

[@TolleGarage]

Yes

[@timothytan7494]

Can this work with Tomica? I'm not completely sure about the size of Tomica rivets.

[@TolleGarage]

I never try a tomica, but it works with matchbox & majorette.

[@ka_aero]

can I manually use 1.8mm drill bit? I dont have a machine like yours.

[@TolleGarage]

Sure. Machine just make the process easier.

[@Fgendo]

What drill bit did you use for the locking pole?

[@TolleGarage]

1.8mm

[@Zchlong]

Quite new to this. Can this process be also used for Tomica models?

[@TolleGarage]

Yes sure

[@Zchlong]

@@TolleGarage Awesome. Thanks!

[@god.mp4]

does this apply the same for other brands, for example the car im trying to open, a subie impreza wrx from majorette? im using a drill but if i find one, ill use a hand drill (skrewdriver lol) great video!

[@TolleGarage]

Yes, I open hotwheels, matchbox, realtoy and majorette with this method.

[@naytnight]

What about Tomicas.

[@TolleGarage]

@@naytnight same

[@afifirfan3895]

I have a question, I only have 3mm and 4mm drill bit. Which one from this two drill bits will you choose?

[@TolleGarage]

4mm

[@afifirfan3895]

@@TolleGarage thank you bro

[@briandagoatscalabrine2982]

Hey tolle my rivet ring snapped off when I was trying to take apart the car should I be worried?

[@TolleGarage]

Oh, it's okay. If you can't make thread for bolt, you can glue it 😁

[@kianahmadi4757]

Does it have to be a 3.5 mm drill bit? And will a 3 mm drill bit work?

[@TolleGarage]

Yes, you can use 3mm drill bit

[@scotty2905]

Hey dude, I just only have 3mm electric drill. Can you tell me is it good enough to open the rivet?

[@TolleGarage]

I never try it, but I think 3mm works well

[@vaguetommy4873]

Where did you get the drill? Can I just use an electric screw driver? Will it be enough to open the rivets? Thanks

[@TolleGarage]

Yes you can, It will be more aesy

[@syamirzakaria]

Hi Sir, if im using 1.5mm OR 2.0mm drill bit, still can use the 6mm bolts right?

[@TolleGarage]

I don't think so. You need same drill bit as mine.

[@ibrahimarslantas6701]

Can i use 3.0 mm hand drill? Because i can not find and hand drill wth 3.5 mm drill bit

[@TolleGarage]

3mm is too small. You better use 4mm

[@luispsotorc5137]

At what drilling speed should I put my drill

[@TolleGarage]

You can start from the low speed

[@jephtahcabigon7986]

New subscriber here. Can i ask the name/brand of your hand drill?

[@TolleGarage]

Thank you so much 🙏😊 I use Krisbow mini drill.

[@jephtahcabigon7986]

@@TolleGarage thx for the reply. Kindly upload more helpful tips / guide / tricks on customizing diecast for newbies like me. Much appreciated 🙏

[@TolleGarage]

Thank you for your input, yes I will make more tutorial in the future.

[@jephtahcabigon7986]

@@TolleGarage thank you 🙏 salamat 🙏

[@crashbeamng201]

Imagine going through that process to unlock your car every day!

[@TolleGarage]

Hehe...not everyday, I just do it in my free time.

[@crashbeamng201]

but what if you had to screw the rivets off the bottom of your real car just to get in! lol

[@TolleGarage]

@@crashbeamng201 too much imagination...

[@clarencedelacruz7822]

Can you use rivets again to put the pieces back together? If so, what is the size of the rivet?

[@TolleGarage]

I don't know, maybe you can try

[@CLASSIFIEDLv]

Hey tolle is the 1.8 drill bit the same as 5/64

[@TolleGarage]

I don't know...we use mm here

[@kevvgamer1460]

Can we use 1.5mm or 2.0mm for drilling the hole for the bolt?

[@TolleGarage]

I think 1.5 is too small, maybe you can try 2mm.

[@kevvgamer1460]

Thx I appreciate it

[@kevvgamer1460]

Thx I appreciate it

[@ferd1918]

Jadi buat dratnya lgs pakai baut ya. tidak perlu pakai hand tap untuk buat dratnya

[@TolleGarage]

It's betul, krna hanya beda 0.2mm sama mata bornya.

[@CLASSIFIEDLv]

Hey tolle is a 9/64 the same as a 3.5 drill bit?

[@TolleGarage]

Maybe same

[@bennyprayoga6851]

Om itu bor mesin nya kuat buat unrivet ga ?? Kalo kuat harga sama belinya dimana ?

[@TolleGarage]

Sebenernya kuat, cuma mata bornya ga bs masuk. Krna max 3mm. Beli di toped banyak bro, namanya mini grinder, harganya 350rban....kalo saya waktu itu beli di ACE...kemahalan.

[@xavierwashington5408]

Are u drilling into it or out of it

[@TolleGarage]

What do you mean?

[@cis2k128]

you probably won't seee this but i was wondering where you got your screws from?

[@TolleGarage]

I buy It in hardware store

[@cis2k128]

Tolle Garage ahh do you happen to remember the name?

[@evanh9134]

Q and A

[@simonbedden3766]

I'm guessing you don't need to tap the holes because the bolt metal is so much harder that the body metal it won't strip the thread.....

[@TolleGarage]

Yes right...and because I use 1.8mm drill bit

[@jeryie4151]

is the rivot sizes same for all hotwheels?

[@TolleGarage]

Yes, same for all hotwheels

[@t44needshelp93]

i feel like im doing smth wrong with the manual drill part, ive been twisting for a while but the rivets still remain locked
any idea why?

[@TolleGarage]

Maybe you are wrong using the drill bit type. Use drill bit for metal, not for wood.

[@jaxsonjjg]

How'd you make that drill bit screw driver?

[@TolleGarage]

I use a 1.8mm drill bit and use a 2mm bolt.

[@jaxsonjjg]

@@TolleGarage To open the bottom of the hot wheels?

[@MrKILLtasticB]

Where can I get these screws and are they called M2 screws or something else in the store?

[@TolleGarage]

You can try ace hardware or others hardware stores

[@user-oz9tc1dk5j]

Can i use 2.5 mm bit

[@TolleGarage]

I think that's too small

[@SuperCarsLondon2023]

what is that screwdriver you using

[@TolleGarage]

Plus

[@gunturwijaya8159]

Mas...mau tanya,buat ngedrillnya,rekomen pake grinder mini merk apa ya?sukses selalu dan Terima kasih

[@TolleGarage]

Trims bro. Bebas sih bro, saya pakai yg murah aja ryu...kalau ini sebenarnya grinder, krisbow...dulu blm punya bor.

[@gunturwijaya8159]

Ooo...pake Ryu.Oke dech..saya coba gugling dulu pricenya.Terima kasih banyak atas infonya mas.

[@POVGames07]

What supplies do you use to customize the hot wheels cars

[@TolleGarage]

What do you mean with supplies?

[@POVGames07]

@@TolleGarage Like the putty, and the paint, what types

[@yonggabriel9885]

can use1.5mm dill bit？

[@TolleGarage]

I think it will be difficult to install the 2mm bolt if you use 1.5mm drill bit.