RECENT FIX: I had a similar issue I found also in the comments is that this didn't work for me also. When you save the file from the FrSky website, you also need one for your transmitter. Once you get a version that is applicable for both your transmitter and receiver (I did 2.1.0) upload those folders into the SD card. From your transmitter, go into a setup and read the SD like in the video. Do it for your receiver, and then unplug all the wires and run the other folder for your transmitter. It should say something like "Flash Internal/external Module" and you'll want to run one of those (I forget which). Make sure when you upload your versions, you make sure both your transmitter and your receiver are the same one, either FCC or LBT. If you choose LBT make sure your Transmitter can handle it. If not, download OpenTX and make it so that it can use EU which is the format needed for LBT.
Holy crap....I just spent about 4 hours trying to figure out why my R-XSR wouldn't bind to my QX7. I updated my transmitter, tried different firmwares for the receiver, nothing worked. Followed your video step by step and it bound almost immediately. Thank you!
Tried all steps with my Taranis QX7 access . And still no luck . I still get all solid lights . Downloaded t he latest firmware for RXSR and works when flashing but when I go to hold bind and power on . Still same lights .
To anyone who still can't get their receiver to bind you can try flashing your radio aswell, like i needed to do. Even if it works without flashing the transmitter it can still be good to do. Anyways, great video it really helped out!
Thank you!!! You just solved all my issues. I still don't understand why I cannot get this to bind with ACCESS Firmware with my ACCESS QX7 but atleast now I can use my receiver.
Great Tutorial! Thanks Just ordered my Quad with same receiver and I also have the same radio. Is it possible to repeat your video on a receiver that is already in the Quad? Thanks Much Aloha
My receiver is doing the same thing. I’m pretty sure I have the same one. But I’m trying to bind it with radiomaster tx16s. Would I follow the same steps
Did this and now red and green are on solid when I power up in bind mode and red flashes when I power up normally. No blue whatsoever. Tried a couple times doing the same as the video, only difference being I didn't create a rec flash profile. Is that really necessary? Or am I doing something else wrong? This is my first time messing with receiver or transmitter firmware
There is no blue because you are in CPPM mode, you can escape this and revert back to SBUS by holding down the button on your receiver while it is on for about 10 seconds. You know if you did it right if the blue light flashes 3 times. Reset the receiver with power and it should be back in SBUS.
Right. But if my Turnigy radio doesn't have the port to flash receiver, I'm stuck, and either have to beg someone to flash it for me or buy new receiver or radio. Is there some usb adapter out there that allows to update receivers?
I just received a Rekon FPV Rekon5. I also have the Frisky X-xsr receiver. Receiver shows all three lights. Also transmitter will not read SD card. I'm 10 hours in and no closer to a solution. Any way you can help?????????
,, Hello friend I have a question as you have a lot of knowledge I have a problem with a receiver is the rxsr frsky is giving me a lot of rx loss and it crashes to the ground you could solve it ?
Do you have insight on not being able to flash the rsxr through the s port? I get the device reset but then it doesnt follow through with the writing. Any suggestions?
I just got a iflight nazgul5 v2 4s. Same reciever and same qx7. Not binding. Also on beta flight im getting a error message reading "rx loss cli msp" green and blue solid light with a red flashing light on reciever. Could this be this same issue or a faulty reciever. Very new to the hobby. Struggling
My taranis just shuts off whenever I try to flash my receiver (Shuts down when its starting to reset the receiver). Anybody know why it does this? Can't find any help on google...
@@Derederi no but flashing can redirect circuits within the flight controller. Also the flashing only works if your Taranis has compatible fw version as the version youe flashing
@@ryannicholson9447 yes it seems you are correct, it did redirect shit. I flashed my R-XSR to 1.9 version. Now it binds, but the signal strenght on the QX7 disappears every 5 seconds. It does react to stick movement nonetheless. Wicked!
![เปิดบ้าน นาราเครปกระเทย 1 ไร่ ขายขาดทุนหลัก10ล้าน เอามาใช้หนี้!!! l [Nickynachat]](http://i.ytimg.com/vi/0jz84VFWVP4/mqdefault.jpg)
RECENT FIX: I had a similar issue I found also in the comments is that this didn't work for me also. When you save the file from the FrSky website, you also need one for your transmitter. Once you get a version that is applicable for both your transmitter and receiver (I did 2.1.0) upload those folders into the SD card. From your transmitter, go into a setup and read the SD like in the video. Do it for your receiver, and then unplug all the wires and run the other folder for your transmitter. It should say something like "Flash Internal/external Module" and you'll want to run one of those (I forget which). Make sure when you upload your versions, you make sure both your transmitter and your receiver are the same one, either FCC or LBT. If you choose LBT make sure your Transmitter can handle it. If not, download OpenTX and make it so that it can use EU which is the format needed for LBT.
@@J-S-Films Your video was one of the only ones I could find that helped me solved 90% of my problem, thank you
Where would i get the 1.9 or 2.1.0 firmware for my tx12?
Holy crap....I just spent about 4 hours trying to figure out why my R-XSR wouldn't bind to my QX7. I updated my transmitter, tried different firmwares for the receiver, nothing worked. Followed your video step by step and it bound almost immediately. Thank you!
in the firmware link i dont know wich firmware to download the accst d16 or access? can you help pls
Tried all steps with my Taranis QX7 access . And still no luck . I still get all solid lights . Downloaded t he latest firmware for RXSR and works when flashing but when I go to hold bind and power on . Still same lights .
To anyone who still can't get their receiver to bind you can try flashing your radio aswell, like i needed to do. Even if it works without flashing the transmitter it can still be good to do. Anyways, great video it really helped out!
Thank you!!! You just solved all my issues. I still don't understand why I cannot get this to bind with ACCESS Firmware with my ACCESS QX7 but atleast now I can use my receiver.
Great video. But I am having an issue connecting my T-lite to a FrSky R-XSR receiver! Its driving me nuts. Do you have any ideas on what to do?
Great Tutorial!
Thanks
Just ordered my Quad with same receiver and I also have the same radio.
Is it possible to repeat your video on a receiver that is already in the Quad?
Thanks Much
Aloha
How does the latest edition of "open PX" show up and where does it go? Is that a fashion you wear when flying the drone?
My receiver is doing the same thing. I’m pretty sure I have the same one. But I’m trying to bind it with radiomaster tx16s. Would I follow the same steps
Nice! Thank you so much. Also where did you get that orange accessory for your reciever that holds the sticks in place? STL file for that?
Thanks man, I think I have messed up everywhere that I could. Your video really helped me figure out my problems!
So downgrading the firmware of the R-XSR is what made the binding work?
I still dont have the blinking red light pls pls help!
New video helped out a lot showing to hook the receiver to the controller other videos did not show that
omfg, the firmware he provided worked like a charm, thank you so much, spent like half the day figuring this out
Do you have a QX7 and R-XSR FCC? What firmware did you downloaded, F-port or only FCC?
@@Anto-lm6ji yes, and downloaded FCC
Did this and now red and green are on solid when I power up in bind mode and red flashes when I power up normally. No blue whatsoever. Tried a couple times doing the same as the video, only difference being I didn't create a rec flash profile. Is that really necessary? Or am I doing something else wrong? This is my first time messing with receiver or transmitter firmware
There is no blue because you are in CPPM mode, you can escape this and revert back to SBUS by holding down the button on your receiver while it is on for about 10 seconds. You know if you did it right if the blue light flashes 3 times. Reset the receiver with power and it should be back in SBUS.
Right. But if my Turnigy radio doesn't have the port to flash receiver, I'm stuck, and either have to beg someone to flash it for me or buy new receiver or radio. Is there some usb adapter out there that allows to update receivers?
man, you are the best!!!
It worked aces to bind but now i have no stick response any advice?
Will this work with a jumper t lite?
I just received a Rekon FPV Rekon5. I also have the Frisky X-xsr receiver. Receiver shows all three lights. Also transmitter will not read SD card. I'm 10 hours in and no closer to a solution. Any way you can help?????????
What firmware do u have on your transmitter?
I'm having major issues I have two taranis qx7 and I can't get neither one to bind to me rsxr relievers.
Bro you are my hero! and great video :)
Man, you saved my life. Thanks for video!!!
Thank you so much! Worked perfectly for me!
I have the x9 lite is there anyway I could still do this
Try
,, Hello friend I have a question as you have a lot of knowledge I have a problem with a receiver is the rxsr frsky is giving me a lot of rx loss and it crashes to the ground you could solve it ?
I would make sure all the solder points on the rx and fc are good and also check to make sure the antennas are seated firmly.
You have to download the 2.1.0 version irsm internal module firmware to match the receiver in 2.1.0
What if my receiver binds but there is no input in betaflight?
Thanks for posting this!!! I couldn't figure it out but you saved me!!
Very useful and well explained, it fixed my issue, thank you.
You got new body wash. Congrats!
is there a way to download the r-xsr firmware to the qx7 without using a sd?
Do you have insight on not being able to flash the rsxr through the s port? I get the device reset but then it doesnt follow through with the writing. Any suggestions?
Does the radio just shut off for you as well?
@@rlHypr It does for me. Have not been able to find a fix.
I just got a iflight nazgul5 v2 4s. Same reciever and same qx7. Not binding. Also on beta flight im getting a error message reading "rx loss cli msp" green and blue solid light with a red flashing light on reciever. Could this be this same issue or a faulty reciever. Very new to the hobby. Struggling
I have 2.2.0 on my radio. There is no receiver firmware for 2.2.0
hello sir, id di all the steps except when i power up my reciever with the newly flashes firmware it still is in the solid red green and blue stage
@@J-S-Films no parodies I figure it out!
@@daily6633 should i download accsst d16 firmware or access firmware?
My taranis just shuts off whenever I try to flash my receiver (Shuts down when its starting to reset the receiver).
Anybody know why it does this? Can't find any help on google...
I love you man...lol
When I plug my receiver in the radio and flash it , it says that it’s not responding I’ve spent days on this quad and tried everything
@@J-S-Films Thanks, I got it working and it flys great.
Now it doeasnt even turn on... Good job! Thanks alot
Check the pins on your flashing harness. Make sure ground and power aren’t reversed
@@ryannicholson9447 if it worked before with the same cable, it should also work now. Isnt that so?
Flashing an rxsr doesnt magically rewire my cables
@@Derederi no but flashing can redirect circuits within the flight controller. Also the flashing only works if your Taranis has compatible fw version as the version youe flashing
@@ryannicholson9447 yes it seems you are correct, it did redirect shit. I flashed my R-XSR to 1.9 version. Now it binds, but the signal strenght on the QX7 disappears every 5 seconds. It does react to stick movement nonetheless.
Wicked!
you made my day!
Great channel name
Potwierdza, stary FW jest lepszy jak nowszy...I agree.
Muito obrigado mano! Só conseguir resolver meu problema usando esse firmware e os procedimentos que vc passou.
THANK YOU!!!!!
WOW this worked thanks
Good stuff!
Thanks man :)
thanks Men u save me !
я сделал и у меня получилось! Правда еще не летит. Но все равно спасибо
Frisky dropped the project and moved to access. That is the bind problem
People just get an xjt module and run old and new problem fixed
What do you mean?