JLR Topix Cloud Programming
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Also sorry for the shaky video, I didn't have a screen recorder on the laptop I was using.
Using Topix cloud to program a RCM module or airbag module on a 2022 Range Rover Sport.
100 amp Power supple used to maintain voltage, and Da-Dongle DoIP used as the interface to program.
Any question please feel free to ask.
When I launch DDA it gets stuck at Downloading Diagnostic data with a red X, any help?
Make sure Java is up to date, make sure you have good internet, and make sure topix cloud isn’t having issues
Can you help i have a 2020 range rover sport all key lost, I have purchased a new kvm and new bcm two new key @Unpluggeddiagandprogramming
@@nestachanda6935 did you get new keys?
Just purchased DA-DoIP.
Diagnostic Device Agent detects DA-DoIP, pull vin and all the data then show vin and ask if I want connected. After press yes it transfer to TOPIx and this is where the problem starts. TOPIx can not detect any modules. In diagnostic tab it shows " there was a problem getting the vehicle Data. Please run network Integrity test to resolve it"
Did you or anybody have this issue recently or before?
Run the network integrity test, it should pull up the cars/modules.
Play Follow all steps the diagnostic associates require.
I forgot to mention nothing installed on PC except jlr.
Either I miss something or my device the effect of or Topix has recent changes
@@andriykostenko5655 I’ve used my
Device numerous times. Never had an issue. Unplug the device and laptop from car. Shut car off. Connect da device to car and wait for lights to light up, then connect da device to laptop, then reopen dda agent and try connection again.
@@andriykostenko5655 reach out to diagnostic associates they are very helpful and will help you. I’ve never had a problem with my device, and works every time I need it. I know one guy on this video had trouble connecting and it was something with his laptop/way the software installed.
Thank you for fast response and advice.
Is there any other way I can communicate with you to send you a few pictures?
I'm really interesting how your PC detects this DA-DoIP in device manager
I am having trouble getting the diagnostics tab to show, Jaguar tells me to get the diagnostics tab to show I have to pay for independent module programming which for me is £72 for 1 hour, is this correct?
Yes.
Its possible flashing tcm land Rover 2019 off line ?
If it’s offline you have to figure out why
@@Unpluggeddiagandprogramming I need update software in tcm land rover 2019
But I dont have acess on line, off-line Its possible do ?
@@EdcarImports no you would need inline access.
@@Unpluggeddiagandprogramming how I can get acess
@@EdcarImports go to jlr tech info/topix sign up for an account and then buy a programming sub
Hello how did you setup the DA doip work with topix ?
Followed the set up instructions on da’s website. Also make sure java is up to date.
hi, I need to program the TCCM of a 2001 Land Rover Discovery 2, can I do it with j2534 by purchasing the subscription or is it only available for vehicles from 2005 onwards?
I believe you could use Jlrs older software, either SDD or I think at one point they used IDS
Can you do feature additions on vehicles, such as approach unlocking and stop start memory via this?
I don’t know as only really program new modules. I believe you can add some stuff. But not 100 percent sure.
hi , i don’t know why when i go into programming i press run , then it says in progress but stays for infinite time , could it be a network problem or what?
Could be, if you’re using WiFi could be an issue, also make sure your java is updated
@@Unpluggeddiagandprogramming i’m using by cable
@@ionutstrelciuc6672 make sure Java is updated. Sometimes you have to try a couple times for topix cloud to push it thru
@@Unpluggeddiagandprogramming have you ever been into this problem?
@@Unpluggeddiagandprogramming and i’m using internet explore , could be this also?
Buddy...i have it connected normally to a Jaguar F-Pace, it shows as "ready" and everything
But the "diagnostic "tab is nowhere to be found
Is it related to the "programming subscription"? Any idea?
Yes you need to buy a programming subscription.
@programminganddiagnosticad1444 thank you very much
I'm going to test it first thing in the morning :)
@@guilhermedamatta9866 if you need help reach out to me. 🤙👍🤘
@@Unpluggeddiagandprogramming 1 hour at £72 inc vat is ridiculous, I pay around £10 for vag and mercedes so why JLR are charging this is a rip off for an hour
@@gazzo65 then turn the job away. Idk what to tell you. 🤷♂️
I just purchased that from diagnostic associates and cannot get it to recognize the device. Care to help? Process gets stuck and device detection when trying to open dda.
So make sure drivers are up to date, and make sure firmware is. Also make sure your pc only has the jlr dad software. Cause one of my
Laptops with other software wouldn’t allow the dda to open/find the diagnostic associates device. Then follow diagnostic associates connection method listed on the page, I think it’s plug device into car, wait till the lights come on and flash, then plug into laptop and try and connect. Works every time for me.
@@Unpluggeddiagandprogramming ok ill give that a try. I have other programming software ok this laptop. Ill try uninstalling them. Thanks for the reply. Ill report back when i het it going.
@@Unpluggeddiagandprogramming got it to work. Had to remove other programs and just leave sdd and dda. Thanks!
Glad to hear you got it sorted. Sorry for the late reply, it doesn’t tell me when I get new comments!
New comment notifications generally come in the form of a notification for the TH-cam app. If you have your notifications disabled by fall, you will not get them so it may be a setting. You have to adjust on your PC.
Do you need Authorised Repairer Login or just Independent Operator Login for programming?
Independent operator, the authorized repairer is for dealer techs I believe
If I bought independent diagnostic authorization I will can use it and connect car and programing online ?
@@abood3lamri yes it’s like 180 for a 1 day subscription. But you’d be able to program whatever car you needed to. Also make sure you select the correct brand. You can get module programming for Jaguar, or Range Rover.
@@Unpluggeddiagandprogramming I try it before 3 months but it was not working
Please send me how you do it, many time I try for the defender l663 and I pay then when I open topix cloud agent software it give me login I try login it give not authorized.
hi bro. how to contact you? have a question about Topix Cloud
Follow the Unplugged Diag & Programming channel on WhatsApp: whatsapp.com/channel/0029VaCUFiQKWEKiUYmnkU38
You dont need any driver to install ?
You install the driver for your device you’re using. So if it’s the Bosch interface you would download those off jlrs website, if it’s the da-dongle from diagnostic associates you would use there driver.
@Programming and Diagnostic adventures Do you have any idea if vxdiag VCX SE it will work or not in Topix cloud diagnostic?
@@abood3lamri I do not. The diagnostic associates da dongle was cheap enough, I just bought it. If you have it try it and see if it works.
@@abood3lamri
Its not working and its banded
@yasiryasir4933 yes Yasir I try it and it's not working, maybe they working in new driver update will work in future, but those day only the official JLR bocsh diagnostic tool working and it's very expensive for normal people.
Its support 2023 Range Rover 2023 ?
Topix cloud? Supports from like 2017/2018 and up I believe.
@@Unpluggeddiagandprogramming
Kindly you have email or whatsaap ?
@@Unpluggeddiagandprogramming
Your vci support Range Rover 2023 l460 ?
@@yasiryasir4933 I believe so. I’ve programmed a few 2023s
@@Unpluggeddiagandprogrammingwhich VCI you using?
Need your no
Jump in the telegram group.