There is another one. If your brush doesn't draw check if there is an empty texture into the "Texture Properties" Section (The lowest button in the right bar). If there is an empty texture - remove it.
Yo I'm new to blender and I'm decent at finding fixes online to niche problems lol. But this video helped me understand things I didn't even know I needed to know. Really appreciate the help man.
@@JHansenArt okay i need help im new to blender i have been following blender guru donut tutorial i survive until texture paint. the object is not visible in shading or texture paint
4:12 not sure if he gives the hotkeys but to flip the faces it's Alt + N then select "Flip" I looked it up because I couldn't find if he gave them or not Edit: And thank you for the tutorial that's exactly what was wrong with my character, the head and feet were inverted
an other thing is when you accidentally select the texture you are trying to paint on as the brush texture, and it will only paint black /not allow you to paint at all
thank you so much for this comment honestly. i've spent about half an hour now trying to figure out why i can't paint and this was the reason. thank you soso much!
13:20 = Go to Edit Mode > Mesh > Normals > Flip. Your normals should be facing the outside. To check normal direction in 3D Viewport > Overlays > Normals > Display Normals.
Hey, I know it's 3 years later, but thanks for making this. I'm not even new to blender, and I'd already found all 6 of those stupid things elsewhere, along with probably 6 more searching top to bottom for this issue, I've spent the last 2 hours trying to solve this, creating new test files and everything. Right at the end of your video you threw in that stylus' throw off the texture painting, I was testing a stylus earlier today, and that was the issue. I restarted blender and it works now. ffs rip to my last 2 hours, thanks for helping me solve it!!!!! lol XD
I’m new! I just got the app today, and I basically have everything down. I already self taught my self, but when I ran into this problem, I tried way that I knew wouldn’t work! Thanks so much!
THANK YOU VERY MUCH MY FRIEND! I was stucked cause the paiting wasn't showing on live paiting, bu in the the end was me forgetting to Unrap the object haha now is working! Thanks again!
I've encountered an issue: some faces were paintable, some - not. It was driving me crazy, I just did not understand WHAT the f* is wrong. I watched your video and it became clear to me: NORMALS! They were wrongly directed. You saved my day, dude. Thank you so much!
OMG !!! The very last one ! The stylus one ! I lost so many hours !! Thank you so much dude. It's amazing that you did this video. Thank you so much for adding that last bit of tip !
Very helpful! Thank you!! I needed to select "Single Image" under Mode in order to paint on a pre-existing image in paint mode. Problem solved, Thank you!
Here's another tip that worked for me. I was able to see my painted textures only in Solid Mode. They were not visible, nor could I paint on the model in Material preview or Rendered modes (but I could paint on them in the image editor, they just wouldn't show on the model). I Deleted all of the UV Maps under Object Data properties FOR THAT OBJECT (for some reason there were several). In edit mode I cleared all seams, then I made new seams and unwrapped again.
Thanks for these tips. I still can't make it work, though. So, after one has checked all six things and still can't paint? What next? For example, the pen does not make any mark, even though I was able to make a couple of accidental marks 2 minutes ago, what should you do? Maybe the best option would be to export the uv map, and use it in Gimp or Krita to try and guess where you want to paint. Sort of like painting blind folded. Thanks. Blender 2.93 on Windows.
This video was really helpful :D Helped me fix my problem quickly and I don't want to know how long it would have taken me to figure it out on my own, as a beginner ;;;
The problem I had was that I set the single image correctly on the nodes/Image editor side but I didn't on the 3d viewport so it was only working on the image editor. I'm so thankful for this tutorial. I was seriously so stressed out.
Thanks for the great tuto, it would be great if you cut everything to pieces, i'm sure there are only newbies watching this like me, and boy oh boy from our perspective everything is so easy to confuse, forget since there is alot to take in. When explaining it would be so good to find the root of every action you make, for an example you spoke about adding buttons to your favorite, how do you do that? I have been searching for 20 minutes where to find the flip button but couldn't find it, since you had it in your favorite you didn't show us where to get it. Probably you showed it at the end of the video but again (Alot to take in and easy to forget) So i didn't bother. Thanks alot for your efforts, keep it up!
Hey, sorry to take so long to reply! I will make a video explaining how to work with quick favorites today or tomorrow :) Anything else you want to know about? I am happy to help
For me it was that I was painting while in Cycles Render Preview. If you are like me, just switch it to the Solid Mode in the upper right corner with 4 spheres.
Ok so Im having an issue with texture painting so when I go and paint a certain part I want, it just bleeds through the unwanted piece that I don't want painted help!
There are two reasons this might be happening that come to mind. The most likely is that your UV wrapping has overlapping islands. Try "Smart Project" and turn up the margin. Your bleed might also be turned up too high. Try somewhere between 2 and 5 px. Hope that helps!
One thing that I don't understand, and maybe you know why and how to fix is, how do you paint using stencils with a Texture slot that's got an Alpha set to zero? What I'm trying to do is to paint minute details using a "dirt" brush on a transparent layer a top of another colored layer. Nothing happens. I have to have a colored layer with alpha set to one in order to pain the dirt details on. This is frustrating as this is how I'm used to working in Photoshop, where I can manipulate the background colors and the dirt separately after I've painted it in, where as with Blender I have to "do it right the first time" so to speak. Strangely enough it's (of course) really simple to paint and smudge on a transparent layer, but when I switch to stencil it somehow is dependent on "physical" layer to paint on.
I have a different issue with painting and although this video was certainly helpful, it did not solve my problem. I made this character in blender that looks a bit like the minecraft guy. Very blocky, yet with smoothend edges. Now i can paint his chest, but not the sides of his arms. I can pain the top of his head, but not the sides of the head. Whenever i want to add colour to his face, i get nothing, unless i paint the top/bottom edge of the face, but then the entire face gets painted. Long vertical lines that are painted on his face. I think this has to do with the unwrapping, and that my model did not get unwrapped properly, like his face is a single line when unwrapped.... or something like that. Do you have a solution to this?
I sure do! If you are getting long vertical lines, then the scale of the unwrap is 0 in one direction. In other words, your "face" face is unwrapped at a straight line. Try selecting your whole mesh, pressing U, and choosing "Smart Project" and see if you can fix that unwrap :) Alternatively, if you send me the blend file, I can try and unwrap it
@@JHansenArt That worked. Thank you. Getting the hang of Blender is a bit more tricky than i thought at first, since there are way more features than i thought.
Allow me to add another one that i keep falling for: When you paint something, then change the Blend Mode to Erase Alpha in order to erase what you did and forget to change it back to the original mode. Basically you'll be erasing instead of painting and it usually wastes some considerable time and nerves before i figure it out!
I've been getting stupid weird behaviour trying to paint with the Draw tool, and today I just figured out that it was because I had a texture set in my 'Texture' dropdown. I'm new to Blender, so I don't know what exactly that does, but I am assuming it's some sort of texture stamp tool or something like that..
Hi, I have a problem where I can paint in Texture painting but when I got modeling it doesn't show the object as painted, and whenever I save it it doesn't look painted. It is only painted in Texture paint.
Super useful tutorial, although, I have to say, it's not super useful to say that you've 'added a hotkey to your favourites'... I mean, that's great for you, but we haven't, so how do we flip the normals?. But it wasn't too painful to find that you do it through Mesh > Normals > Flip, but yeah, otherwise, this is great
not what i am getting ... my model has 2 textures and i render out a thing and see i need to fix a few small areas and now in texture paint its pink as if there is no textures and it wont let me paint at all even when i select the textures i need
I’m having an issue with a 3D model that I downloaded for a fan film and everything else works great... except for the eye textures. Any help would greatly be appreciated.
help me cuz for some reason im on the draw tool (On texture paint) and its not working at all, nothing i tryed so far is even working so idk what the proplem is, and no its not texturing on the inside instead of the outside, its just not working so please help me (Im on blender 3.6)
I appreciate the video but I think none of this issues are happening to me and I dont understand why it doesn't work for me. I wanted to paint a texture for a mesh so I opened the texture paint tab, added a base color and started painting. Just today it stopped working after I was testing ways to paint only specific faces. I've only used blender this past three days so I dont understand a lot of this stuff
Texture painting wouldn’t work in these cases: o The wrong object is selected. You can switch to the object you want by hovering over it and pressing “Alt+Q”. o You have no texture or the wrong texture set in the texture slot (Texture Slots dropdown menu in the header - Do not confuse with “Texture” which concerns the brush texture) o If the brush has a black texture (it does nothing). Make sure that you don’t have a black texture set to the brush (in the header or under Brush settings). o If the Brush is not selected o If the brush has a Blend mode that wouldn’t show (make sure it’s set to “Mix”) o If normal are flipped and “Backface Culling” is turned on under “options” in the header. Check this by activating “Face orientation” in the overlays menu. It’s preferable to go in Edit mode and flip the normal.
Ple clear this buddy i have tiling issue while using texture painting. I am trying to overlay 2 texture and i started brushing it get tiled because of seamless texture that i apply to the upper texture how to fix this
texture painted a whole face and came back after saving and it wasn’t there … super demotivating tbh. is there any easier way to create faces for models without literally editing the character ?
Hi I am having some problem where also with all those things checked it does not draw anything. the object is set right, the faces, the texture in the drawing interface and in the shader, the uvmap. I am using the left mouse button. and in old versions this always worked, however now since 2.9.3 it just doesn't work on any object anymore.
I updated blender and everything works now(updated from blender 2.93.4 to blender 3.0). I really spend much to long to try to figure it out, and should have tried to updating it more early. however it resulted in me finding this place where tutorials are about teaching instead of exactly following the steps.
Ooh that’s a tricky one- it might be that you are using nodes that cycles doesn’t support, try connecting your image texture directly to Material Output with nothing in between. Also if you send me your blend file I can take a look at it :)
Wow I think I was going crazy belive me or not I'm using blender for over year, and have really weird problems with texture paint from time to time I think I knew all of them till now but today I was searching for solution for yet 1 more problem and I cant belive what the fk was that, Maybe a bug and it looks like a bug. Ill explain it now. I was unable to paint whatever I do I know what I do i change textures etc everything even was desperate to try and change Evee with Cycles and back absolutely nothing help/changing textures in shading tab multiple times everything creating new images. I know its not from UV also. or from normals too. And you know what fixed this? on The texture paint tab on the left part of the windows (image editor) I removed the image there with the X and put exactly the same image there and WTF it worked. Its some kind of refresh or I don't know what was that but I was trying to fix this for an hour... Forgot to mention this is Blender 4.0 and still bugging texture paint.
None of that worked for me. I am new to blender and this is killing me. It was working initially, then stopped. The difference is that i changed the uv ... could that have changed something ?
nope it works about 10% of the time and theres no fix i have a uv i can paint directly on the texture but not the model and it was bloody working fine 5 minuts ago
If you'd prefer a shorter written tutorial, you can find this information here: www.blendernomy.com/6-things-to-try-when-texture-paint-isnt-working/
There is another one. If your brush doesn't draw check if there is an empty texture into the "Texture Properties" Section (The lowest button in the right bar). If there is an empty texture - remove it.
Tyvm for this comment, this solved the problem I was having!
thanks my man !
tyty
thank you
Thankyou, saw this comment before even starting the video
Yo I'm new to blender and I'm decent at finding fixes online to niche problems lol. But this video helped me understand things I didn't even know I needed to know. Really appreciate the help man.
I'm so happy to hear that! That's my goal :)
@@JHansenArt I agree, really helpfull tips here, Good job Joseph and thanks for that!! much appreciated.
@@JHansenArt okay i need help im new to blender i have been following blender guru donut tutorial i survive until texture paint. the object is not visible in shading or texture paint
@@JHansenArt also in edit mode as well
4:12 not sure if he gives the hotkeys but to flip the faces it's Alt + N
then select "Flip"
I looked it up because I couldn't find if he gave them or not
Edit: And thank you for the tutorial that's exactly what was wrong with my character, the head and feet were inverted
I tried that but it's still not working 😕
you just saved my mental health, thanks. I was like: "BUT I DON'T HAVE THIS FIXED IN MY QUICK MENU; HOW CANT I FLIP THAT SHIT???"
@@cat_227 I totally know the feeling 😄glad this helped!
@@pubehair I hope you found it! I haven't worked on blender in several months unfortunately and even then I was a newbie. Best of luck!
@@pubehair you have to be in edit mode, prob found it out already but there you go and other people looking at this
an other thing is when you accidentally select the texture you are trying to paint on as the brush texture, and it will only paint black /not allow you to paint at all
Holy fuck thank you so much for this comment.
Also!!! Having a blank/black texture on the brush will have the same effect!
thank you so much for this comment honestly. i've spent about half an hour now trying to figure out why i can't paint and this was the reason. thank you soso much!
Your comment was absolutely lifesaving. Thanx forever!!
@@LincolnDWard Lifesaver
13:20 = Go to Edit Mode > Mesh > Normals > Flip. Your normals should be facing the outside. To check normal direction in 3D Viewport > Overlays > Normals > Display Normals.
THANK YOU>>JESUS
Thank you very much!
You are a Saint. I was losing my mind figuring out why I couldn't paint my texture, then I saw your comment and tried it, and it worked thanks.
Oh my gosh, I was pulling my hair off why I can't paint on my 3d model, It was the normals that's needed to be flipped. Thank you man. Helped a lot.
Hey, I know it's 3 years later, but thanks for making this. I'm not even new to blender, and I'd already found all 6 of those stupid things elsewhere, along with probably 6 more searching top to bottom for this issue, I've spent the last 2 hours trying to solve this, creating new test files and everything.
Right at the end of your video you threw in that stylus' throw off the texture painting, I was testing a stylus earlier today, and that was the issue. I restarted blender and it works now.
ffs rip to my last 2 hours, thanks for helping me solve it!!!!! lol XD
I revisit this video every single time I have this problem. You're a genius!
thank you so much, you are the kind of people that really know blender more than pros
Yeah because pros don't know how to paint an image. 😉😂
I’m new! I just got the app today, and I basically have everything down. I already self taught my self, but when I ran into this problem, I tried way that I knew wouldn’t work! Thanks so much!
THANK YOU VERY MUCH MY FRIEND! I was stucked cause the paiting wasn't showing on live paiting, bu in the the end was me forgetting to Unrap the object haha now is working! Thanks again!
I've encountered an issue: some faces were paintable, some - not. It was driving me crazy, I just did not understand WHAT the f* is wrong.
I watched your video and it became clear to me: NORMALS! They were wrongly directed.
You saved my day, dude. Thank you so much!
4:40 THANK YOU! I now know why I was unable to draw on half of my model! Half of it (which has been previously sliced) had the normals flipped inward!
OMG !!! The very last one ! The stylus one ! I lost so many hours !! Thank you so much dude. It's amazing that you did this video. Thank you so much for adding that last bit of tip !
You're welcome!!
Very helpful! Thank you!! I needed to select "Single Image" under Mode in order to paint on a pre-existing image in paint mode. Problem solved, Thank you!
You're welcome!
Here's another tip that worked for me. I was able to see my painted textures only in Solid Mode. They were not visible, nor could I paint on the model in Material preview or Rendered modes (but I could paint on them in the image editor, they just wouldn't show on the model). I Deleted all of the UV Maps under Object Data properties FOR THAT OBJECT (for some reason there were several). In edit mode I cleared all seams, then I made new seams and unwrapped again.
DUDE you just save my life I try to fix the painting problem and I did what you say and I solve this TY so much
What is solid mode
You are a saver, You are the MVP. Got stuck in missing UV. Saved my day.
For some reason my objected was flipped, now it works, thank you so much for this!!
Ty, always nice to get a quick and easy answer to little problems that occur
THANK YOU THANK YOU THANK YOU. that face orientation setting is really helpful
thank you man, after searching for hours, i finally discovered that some of my faces where flipped. thank you so much for giving me the solution
OH THANK YOU SOO MUCH! The faces which were facing inside were the problem
Thanks for these tips. I still can't make it work, though. So, after one has checked all six things and still can't paint? What next? For example, the pen does not make any mark, even though I was able to make a couple of accidental marks 2 minutes ago, what should you do? Maybe the best option would be to export the uv map, and use it in Gimp or Krita to try and guess where you want to paint. Sort of like painting blind folded. Thanks. Blender 2.93 on Windows.
This video was really helpful :D Helped me fix my problem quickly and I don't want to know how long it would have taken me to figure it out on my own, as a beginner ;;;
I am new to blender and I dont know how to thank you more.
The problem I had was that I set the single image correctly on the nodes/Image editor side but I didn't on the 3d viewport so it was only working on the image editor. I'm so thankful for this tutorial. I was seriously so stressed out.
Holly shit I flipped the normals and it worked. U saved my life bro
dude thank you so much ... i was having a hard time finding a solution to my issue. i just needed to flip the faces
Thanks for the great tuto, it would be great if you cut everything to pieces, i'm sure there are only newbies watching this like me, and boy oh boy from our perspective everything is so easy to confuse, forget since there is alot to take in. When explaining it would be so good to find the root of every action you make, for an example you spoke about adding buttons to your favorite, how do you do that? I have been searching for 20 minutes where to find the flip button but couldn't find it, since you had it in your favorite you didn't show us where to get it. Probably you showed it at the end of the video but again (Alot to take in and easy to forget) So i didn't bother.
Thanks alot for your efforts, keep it up!
Hey, sorry to take so long to reply! I will make a video explaining how to work with quick favorites today or tomorrow :) Anything else you want to know about? I am happy to help
You can find that video on Quick Favorites here: th-cam.com/video/hiogkdb2piM/w-d-xo.html
@@JHansenArt Thank you so much! You are amazing!
This video saved me headaches! Thank you!
NICE VIDEO!!!! i was stuck for 2 days cause of the bacface culing, you save me, thanks a lot
Glad I could help!
Oh my god, you saved me many hours of work! Thank you so much!!!
To flip normals in Blender 2.93 click MESH at the top in edit mode then NORMALS then FLIP or press ALT + N in edit mode then FLIP.
Thanks for your help!
I already was messing the donut tutorial up lol
Perfect! I was trying to paint a skydome and nothing was working. Your video reminded me that I forgot to flip my normals. Thank you.
thank you, you realy help me with a problem a was dealing for 1 hour
thank you so much! the flip trick actually worked!!! thank you for sharing!
Thanks man for the advice! The one with the face orientation was my problem! You should have told us were to find the flip option doe...
Glad it helped! Sorry I forgot to mention that
It is still a fix for blender 4.0
The UV unwrapping worked for me.
Probably you will not see this after a year but thank you
amazing thank you! found the solution I needed.
For me it was that I was painting while in Cycles Render Preview. If you are like me, just switch it to the Solid Mode in the upper right corner with 4 spheres.
Ok so Im having an issue with texture painting so when I go and paint a certain part I want, it just bleeds through the unwanted piece that I don't want painted help!
There are two reasons this might be happening that come to mind. The most likely is that your UV wrapping has overlapping islands. Try "Smart Project" and turn up the margin. Your bleed might also be turned up too high. Try somewhere between 2 and 5 px. Hope that helps!
I'm having the same problem, searched literally everywhere and couldn't find a single answer...
This was helpful my faces was not flipped thank you.
Awesome! I'm glad you got it working!
Someone probably already answered, but I think the square issue happened because your UV's changed after you modified the mesh.
One thing that I don't understand, and maybe you know why and how to fix is, how do you paint using stencils with a Texture slot that's got an Alpha set to zero?
What I'm trying to do is to paint minute details using a "dirt" brush on a transparent layer a top of another colored layer. Nothing happens. I have to have a colored layer with alpha set to one in order to pain the dirt details on.
This is frustrating as this is how I'm used to working in Photoshop, where I can manipulate the background colors and the dirt separately after I've painted it in, where as with Blender I have to "do it right the first time" so to speak.
Strangely enough it's (of course) really simple to paint and smudge on a transparent layer, but when I switch to stencil it somehow is dependent on "physical" layer to paint on.
This is a deeply interesting question that I don't have an immediate answer to. Let me look into it and get back to you!
@@JHansenArt Thank you very much :)
thanks for this. im new to blender and this was soooo helpful
Glad it was helpful!
Thanks for the video. Need a 7th thing because my texture painting is still broken. Edit: What worked: Deleted the brush and made a new one.
Bro, can't be thankful enough for this video.
Thank you this helped a lot!
I have a different issue with painting and although this video was certainly helpful, it did not solve my problem.
I made this character in blender that looks a bit like the minecraft guy. Very blocky, yet with smoothend edges.
Now i can paint his chest, but not the sides of his arms. I can pain the top of his head, but not the sides of the head. Whenever i want to add colour to his face, i get nothing, unless i paint the top/bottom edge of the face, but then the entire face gets painted. Long vertical lines that are painted on his face.
I think this has to do with the unwrapping, and that my model did not get unwrapped properly, like his face is a single line when unwrapped.... or something like that.
Do you have a solution to this?
I sure do! If you are getting long vertical lines, then the scale of the unwrap is 0 in one direction. In other words, your "face" face is unwrapped at a straight line. Try selecting your whole mesh, pressing U, and choosing "Smart Project" and see if you can fix that unwrap :) Alternatively, if you send me the blend file, I can try and unwrap it
@@JHansenArt That worked. Thank you.
Getting the hang of Blender is a bit more tricky than i thought at first, since there are way more features than i thought.
It WAS the normals, great stuff!
Allow me to add another one that i keep falling for:
When you paint something, then change the Blend Mode to Erase Alpha in order to erase what you did and forget to change it back to the original mode. Basically you'll be erasing instead of painting and it usually wastes some considerable time and nerves before i figure it out!
you were super helpful, txh!
Oh, Flip It was the issue, thanks a lot man!!!
Glad I could help!
I've been getting stupid weird behaviour trying to paint with the Draw tool, and today I just figured out that it was because I had a texture set in my 'Texture' dropdown.
I'm new to Blender, so I don't know what exactly that does, but I am assuming it's some sort of texture stamp tool or something like that..
Thanx. That was very helpful
Hi, I have a problem where I can paint in Texture painting but when I got modeling it doesn't show the object as painted, and whenever I save it it doesn't look painted. It is only painted in Texture paint.
It sounds like you don't have the painted image assigned in the material nodes
Super useful tutorial, although, I have to say, it's not super useful to say that you've 'added a hotkey to your favourites'... I mean, that's great for you, but we haven't, so how do we flip the normals?. But it wasn't too painful to find that you do it through Mesh > Normals > Flip, but yeah, otherwise, this is great
What fixed it for me was applying the scale on the object I was painting.
not what i am getting ... my model has 2 textures and i render out a thing and see i need to fix a few small areas and now in texture paint its pink as if there is no textures and it wont let me paint at all even when i select the textures i need
I’m having an issue with a 3D model that I downloaded for a fan film and everything else works great... except for the eye textures. Any help would greatly be appreciated.
Would you send me the .blend file and I can take a look at it?
help me cuz for some reason im on the draw tool (On texture paint) and its not working at all, nothing i tryed so far is even working so idk what the proplem is, and no its not texturing on the inside instead of the outside, its just not working so please help me (Im on blender 3.6)
YOU ARE MY GOD DAMN SAVIOR. THANK YOU SO MUCH!!!
this was so helpful, thank you!!
I appreciate the video but I think none of this issues are happening to me and I dont understand why it doesn't work for me. I wanted to paint a texture for a mesh so I opened the texture paint tab, added a base color and started painting. Just today it stopped working after I was testing ways to paint only specific faces. I've only used blender this past three days so I dont understand a lot of this stuff
thank you so much.This is just what i need right now.you helped a lot!!!
yeah no problem :)
How the hell do flip it? It's in your quck menu but where do you find the flip swtich?
I believe it's under Mesh > Normals > Flip, you can also search for "Flip" in Blender
amazing
Life saver! Thanks for this!
Thank you a lot! Just have an issue with flip normals and cant figure out what is happening)
Thank you so much!
For me it was the number three - poligons facing the wrong way...
Glad it helped!
Thank you very much. I love you.
I have no idea whats wrong with mine, I’ve been trying to paint on my head for like an hour now and nothing
Would you send me the .blend file? I can take a look at it
I made a 3d sniper model and only 1 single cube is correctly placed should I do the same as problem 3?
mine still dont paint? im in texture paint after ur steps, i did try many times , and i did also check my active settings.
Texture painting wouldn’t work in these cases:
o The wrong object is selected. You can switch to the object you want by hovering over it and pressing “Alt+Q”.
o You have no texture or the wrong texture set in the texture slot (Texture Slots dropdown menu in the header - Do not confuse with “Texture” which concerns the brush texture)
o If the brush has a black texture (it does nothing). Make sure that you don’t have a black texture set to the brush (in the header or under Brush settings).
o If the Brush is not selected
o If the brush has a Blend mode that wouldn’t show (make sure it’s set to “Mix”)
o If normal are flipped and “Backface Culling” is turned on under “options” in the header. Check this by activating “Face orientation” in the overlays menu. It’s preferable to go in Edit mode and flip the normal.
I learned very useful things from this tutorial. But I'm having a problem with texture symmetric paint.
Ple clear this buddy i have tiling issue while using texture painting. I am trying to overlay 2 texture and i started brushing it get tiled because of seamless texture that i apply to the upper texture how to fix this
Thanks for this video I love it
Best video.
Thanks, I really appreciate it :)
i have a problem, my texture is mixed up so when i export it to blender it turns out to be black and purple mixed together. do you knos how to fix it?
Interesting! Would you share the texture and model file with me so I can take a look at it?
Awesome!! Thank you very much Joseph, extremely helpful tutorial.
thanks man, I'm really happy my difficulties figuring this out are paying off for people
Thanks a lot man!!!!!
Glad it helped!
Bro how come when I texture paint I can see it on material preview but not on shading render preview ?
texture painted a whole face and came back after saving and it wasn’t there … super demotivating tbh. is there any easier way to create faces for models without literally editing the character ?
good tutorial thank you
Thank you, I really appreciate that :)
You can u say how u flipped the normals??? That my problem and I don't know how to flip the face orientation!!
Thank You!!
You're welcome!
texture paint laggy, why?
Me too.... did u find a way ?
Hi I am having some problem where also with all those things checked it does not draw anything. the object is set right, the faces, the texture in the drawing interface and in the shader, the uvmap. I am using the left mouse button. and in old versions this always worked, however now since 2.9.3 it just doesn't work on any object anymore.
I updated blender and everything works now(updated from blender 2.93.4 to blender 3.0).
I really spend much to long to try to figure it out, and should have tried to updating it more early. however it resulted in me finding this place where tutorials are about teaching instead of exactly following the steps.
Nice video, but i have a problem, i've painted my texture and it's showing in eevee but not in cycles,why??
Ooh that’s a tricky one- it might be that you are using nodes that cycles doesn’t support, try connecting your image texture directly to Material Output with nothing in between. Also if you send me your blend file I can take a look at it :)
@@JHansenArt NeverMind, just restarted the whole project and it worked perfectly,Thanks anyway ❤❤
Wow I think I was going crazy belive me or not I'm using blender for over year, and have really weird problems with texture paint from time to time I think I knew all of them till now but today I was searching for solution for yet 1 more problem and I cant belive what the fk was that, Maybe a bug and it looks like a bug. Ill explain it now. I was unable to paint whatever I do I know what I do i change textures etc everything even was desperate to try and change Evee with Cycles and back absolutely nothing help/changing textures in shading tab multiple times everything creating new images. I know its not from UV also. or from normals too. And you know what fixed this? on The texture paint tab on the left part of the windows (image editor) I removed the image there with the X and put exactly the same image there and WTF it worked. Its some kind of refresh or I don't know what was that but I was trying to fix this for an hour... Forgot to mention this is Blender 4.0 and still bugging texture paint.
thank you so much
None of that worked for me. I am new to blender and this is killing me. It was working initially, then stopped. The difference is that i changed the uv ... could that have changed something ?
i was making a model in blander but i tryed to paint it just came up with "missing textures detected"
The one I always stuck on is DELETING THE BRUSH AND CREATING NEW ONE HELPS BUT I DON"Y NOW WHY?
My hero
nope it works about 10% of the time and theres no fix i have a uv i can paint directly on the texture but not the model and it was bloody working fine 5 minuts ago
thx man
😊