Internet networking setup for big house | Deco Mesh Router | Internet wiring for your house | Villa
ฝัง
- เผยแพร่เมื่อ 16 เม.ย. 2022
- How you should setup broadband internet setup in your big house, so you can get wifi signal at each and every corner of you house without any interruption.
ISP - Router - Switch - Switch - All devices
very Informative video
Now I understand why we learn Networking in 2nd year of BTech.
Great explanation
Extremely informative video sir. I was searching this kind of video for many days... Not only explain video and also you have showed the entire setup... Appreciate your effort...
I dont have idea in internet connection , thats why when i watcthing your sharing about the knowledge , i say Thanks
Thanks a lot for making this video. I was looking for exactly this, and you answered all the questions I had. Aur aapka explain karne ka tareeka bahut badhiya hai.
It's a very helpful tutorial.Excellent explain boss. Thank you upload for networking vedio.
Good Expiation of the entire set up in 01 video. You gave a clear idea which i was searching for. Thanks a lot Buddy. Good Luck
Appreciate your in-depth explanation superb
Thank you Mr. Suman this is useful information for beginners.
Very good video...
Simply explained for a totally practical situation seen in all of our homes..
Would be great to see next level connections eg for 2.5G, or 10G
Backbone system optimised for NAS etc...
For now I will absolutely use this video to set up my home network..
Thank you
V nicely explained 👍👌🏻👌🏻
well explained😀
This is really helpful, thanks a lot!
Very helpful video! Thanks
Very nice and very help full video Sr
Thanks a lot, now I'm clear about what I'm goin to do
great sir
Good information..Appreciate it.
Nicely explained. Would be great if you can provide product suggestions for switch and deco mesh.
Also, is the wifi from act also enabled or wifi is enabled from mesh only?
Very informative video , can you provide the link for switches
Excellent video
Your explanations are good sir but the parking area lan cabling looks a little mess. I suggest to put a network rack so that it will be nicely arranged.
thanks for information
thank you , that was very helpful
What about if the first floor and second floor are rental units
At @16:12 it seems like you brought the cat6 cable from an electrical box where there will be electrical wires right?
Is it safe for Ethernet cable because I want to bring my cat6 cable like that only from my 2nd floor to 1st floor.
I want to know is it safe because everywhere on internet it says it's not safe to do that and at least 4 inches or 8 inches gaps should be there for electric cable and Ethernet cable if they are coming from same conduit.
Can you please reply to this? @BinodSumanActivity
Have you thought to run a bigger switch managed to isolate the WAP from the router and prevent bad network from the good network? That’s my debate right now
In the setup shown in the video you have used deco mesh systems. Is it possible to use ethernet backhaul with them?
Really nice set up how much you have spent fort this
What if you set one of the deco mesh as router? Would the switch be connected to the deco or to the old router?
very good video
@Binod - Awesome video man!. I do have few questions. A. Can we connect all 3 mesh router with cat6 cable? [I know you just connected 1st floor mess router with cat6 cable]? B. What is the max capacity [like it can transfer 400 MBPS or 800 MBPS] of mesh router? C. On 2nd floor, when you are connect your laptop with mesh router - what is the max speed do you get? D. In your internet plan, what is your speed?
Yes. Wired backhaul is far better than wireless backhaul. All Deco mesh routers support wired backhaul. In this particular case....u can connect each of the decos individullay to the ground floor switch OR daisy chain them i.e
, Ground fllor deco to 1st floor, then 1st floor to the second... assuming the particular decos have at least 2 ports in them. In -fact, if the decos support POE then no need to plug them to the adapter...use a poe switch on the ground floor and then connect each deco individually via ethernet to the poe switch....u will have a wired backhaul and power to all 3.
@@vipultewari1750if you do this it's like you split them individually so I was wondering if you would still have one wifi password (one whole system)? Because if yes it's best to wire all the pods, you can set them far apart no need to connect them together (to find each other) 🤔
អរគុណបង❤
is your computer switch connected to the router?
Sir,My idea also same like you
Thank you, one question. Are the deco mesh devices essentially just APs? (Access Points)
It can be configured as a router or access point.
Can the deco mesh be connected to wired connection to get higher internet speeds? If not, will there be a drop in the speed of wifi at GF and SF ?
Definitely. Ethernet backhaul is much stable and fast. But the whole point of mesh is to achieve better connectivity wireless, without the hassles of wires.
Sir, are you an engineer?
So why use switches when a splitter can do the same job 🤔🤔🤔. Or I'm wrong. Isn't possible to run a cable all the way to the main source and then distribute it with splitters?
I didn't have headache before watching this brain torture
Thank you for your valuable feedback. Can you please suggest me, how to improve my upcoming video? Thank you again. Good day !!
Why you have not used Hub instead of switch
not yet clear.
Nice but don’t understand your language
Your vedio not clear
Great explanation