Thanks first for the amazing product. Everything worked as promised. Great quality. Thanks again for the perfect install video. Install was pretty easy. If you guys ever make a hot side inter cooler kit you have my money 👍
I installed this on my 2021 today and I have to say that I had a bee-atch of a time getting the flex pipe on the machined piece. The space is cramped and the pipe, for good reason, does not have much flex. As simple as this should be, I found it more difficult than installing the air intake. Probably just me. I normally don't tackle this stuff myself but it sure did look easy in the videos. Installed.....looks good though.
Easy install… Only issue I had was with the supplied (green) o-ring on the hard pipe. For some reason I could not get the hard pipe on the intake. I removed the factory o-ring (orange) and used that instead with no issues.
I installed mine this morning on my 22 F350 and I have a question or more of reassure me that’s it’s fine. I installed with a little oil on hand I mean enough just for the o ring. It was a tight fit until it clicked (I didn’t like how it went on so I removed and inspected) then tried again and it went on (tightly) so I called it good and finished install. I haven’t driven the truck yet but will tomorrow morning. I’m hoping that the oil is more of an assist and not an all or nothing. I was more concerned for the o ring that was provided. Hopefully you can reassure me to just enjoy haha
Can you guys tell CARB to hurry up and give you an E.O. number already? I've been wanting this for a while now. I've blown through two of the stock ones in 65K miles.
Did my 2019 today. The hardest part is the bottom clap…… it’s a tight fit. Other than that, looks awesome and is CARB compliant in nazi California. Thanks guys👍
Don’t buy the K&N cold charge pipe kit, it’s bs. They trying to save money by not making the little rubber elbow piece too short by 1/2” and the metal clamps are 1/2” too short as well. Fucking hell cmon K&N. I’ll give you $5 more dollars to not make this shit a struggle fest!!!
Thanks first for the amazing product. Everything worked as promised. Great quality. Thanks again for the perfect install video. Install was pretty easy. If you guys ever make a hot side inter cooler kit you have my money 👍
I installed this on my 2021 today and I have to say that I had a bee-atch of a time getting the flex pipe on the machined piece. The space is cramped and the pipe, for good reason, does not have much flex. As simple as this should be, I found it more difficult than installing the air intake. Probably just me. I normally don't tackle this stuff myself but it sure did look easy in the videos. Installed.....looks good though.
Easy install… Only issue I had was with the supplied (green) o-ring on the hard pipe. For some reason I could not get the hard pipe on the intake. I removed the factory o-ring (orange) and used that instead with no issues.
I installed mine this morning on my 22 F350 and I have a question or more of reassure me that’s it’s fine. I installed with a little oil on hand I mean enough just for the o ring. It was a tight fit until it clicked (I didn’t like how it went on so I removed and inspected) then tried again and it went on (tightly) so I called it good and finished install. I haven’t driven the truck yet but will tomorrow morning. I’m hoping that the oil is more of an assist and not an all or nothing. I was more concerned for the o ring that was provided.
Hopefully you can reassure me to just enjoy haha
Very helpful
For the price it would be nice to have a tab and hole to reinstall the factory harness retainer not use a zip tie...
What about the hot side??
Can you guys tell CARB to hurry up and give you an E.O. number already? I've been wanting this for a while now. I've blown through two of the stock ones in 65K miles.
Did my 2019 today. The hardest part is the bottom clap…… it’s a tight fit. Other than that, looks awesome and is CARB compliant in nazi California. Thanks guys👍
Great job with the video. This helped a lot. Everything fit perfectly.
I installed mine but didn’t have diesel engine oil on hand to lube the inside? Will I be ok?
Yes
Hot!!!!
WHY IS YOUR PIPE MORE MONEY THAN YOUR COMPETITIONS PRICE
Have you ever heard the saying “you get what you pay for” ??
Don’t buy the K&N cold charge pipe kit, it’s bs. They trying to save money by not making the little rubber elbow piece too short by 1/2” and the metal clamps are 1/2” too short as well. Fucking hell cmon K&N. I’ll give you $5 more dollars to not make this shit a struggle fest!!!
@@larryphillips4164 we are S&B