吸音材、入れていません。 I do not put a sound absorbing material in the bottle speaker. 選曲によって、大音量で鳴らすとガラスの共鳴する音が気になりますが、共鳴する音も心地よいです。 By selecting music, when you play loud sounds, you will be concerned with the resonance of the glass, but the resonating sounds are comfortable as well. 木材は柔らかく、ガラスは固くシャープな音質です。 Wood is soft, glass is hard and sharp sound quality. どちらもいいと思います。どちらが良いかは好みの問題です。 I think both are good. Which is better is a matter of preference.
cool that someone else is making experimental speakers as well! i made these beer can things and the resonating is "interesting" :D imgur.com/gallery/MJlpRPB
Всегда поражаюсь настойчивости и упорству людей, готовых потратить кучу времени и сил на производство очередной прикольной безделушки. Как когда-то говорили: "Чем бы дитя не тешилось, лишь бы не кололось".
I have to admit, this was incredible to watch, I was more than impressed. I mean who would've thought to use a JDs bottle, and make a set of speakers?? Although, I can see that, the glass is an excellent sound receptor, and the reproduction has got to be incredible!!!! Truly amazing to watch!!
冒頭のラベルを剥がすシーン・・・ The scene to remove the label at the beginning... あれ、瓶の中に沸かしたばかりの熱湯が入っています。 There is a boiling hot water in the bottle. 熱でラベルの粘着力を弱め、ガラスクリーニング用のスクレーパーで剥がします。 Weaken the adhesive strength of the label with heat and peel off with a scraper for glass cleaning. 今までアップした工作動画の中で、この作業が一番難しいです。 This work is the most difficult of the videos released so far.
A very intriguing project. I would say that the glass speakers suffer a bit from lack of low frequencies, but they seem to work surprisingly well. I suspect that there might be a resonance frequency inside the bottle due to the the tubular neck, but overall a really interesting project. I'm not sure that I would have the confidence to cut and drill a glass bottle like that. I really enjoy the wonderful imagination that you bring to these projects. I'm looking forward to the next one.
@@StygianBlood in what way would you resin the bottle to help? In my opinion,To mix some resin the right color,and set in along the inside, would finish the effect. Although,I like them.
Glass rings like a bell. Wood dampens the resonance. Hit a glass bottle with a spoon, ding-ding. Hit a wood box, thud-thud. Thats why the glass bottles sound so bright. Very cool project. Would make for a great conversation starter.
Sono rimasto meravigliato da quante invenzioni che vengono realizzate di persone che hanno molte capacità di poter costruire progetti audio su bottiglie di liquore e quant'altro. Bravi e complimenti👏👏👏😁👍
I am an audio expert and have never come across somthing like this, I love the use of everyday objects which has produced a sound like this, I have seen glass speakers before and glass does resonate at a different frequency but until this video i did not realise how much of a difference it makes... just wow... props to you dude (liked and subed)
If you're an audio expert how have you never heard of ceramic enclosures. The whole point of using ceramic is that it's more dense, and can have color. And it comes to Glass all you can do it tent it.
Hi there, excellent work. It is almost peacefully see this video. No hurries, no jumpy tasks, in few words, nice job. It seems to me, that you can paint inside the bottle with some wood paint in order to simulate the color of Jack Daniel's whisky. Covered with that, you can put some soft material, in order to avoid the hard surface of the glass. Greetings from Agua Dulce, Veracruz, México.
Заглянул в магазин - за цену двух таких JD, пожалуй, можно прикупить что-то приличное и слушать без лишних заморочек))) Но, скажу честно, я сам как-то пристроил два трехдюймовых динамика в пол-литровые банки. Отлично получилось. Звук гораздо интереснее , чем у того китайского недоразумения, откуда я их извлек, да.
If anyone is planning to make their own speakers like this and live in a dry county, just send them to me and I will legally empty them for you and ship back. Because I'm such a nice guy, I will do this for you completely free of charge! 😏
Great idea, but as we know wood gives more soft and warm low tones and glass the opposite, so maybe try to make a speaker with wooden cabinet for bas speaker and with glass part for tweeters, then youll have best of both worlds :D
I had to close my eyes and listen with cupped ears to tell the difference. The glass does sound a little clear and higher than the wood which gives off a more rich base tone.
I have a small CRT that's been nagging me to make a DIY speaker with.. seeing this has really made me want to do it.. thanks for the inspiration to do so..
Thanks for the very interesting build video. The sound comparison part is a bit suspect as there are two significant variables besides wood vs. glass. The wood enclosure appears to be much larger in capacity and it is ported. The F3 on a correctly ported enclosure is going to substantially lower (i.e., much more bass at lower frequencies) regardless of what the enclosure is made out of. It would be interesting to see an actual apples-to-apples comparison (same size and sealed) with RTA measurements. I would assume the glass has a resonance frequency(s) within the audible range that would be apparent both on a response graph and to the ear. I suppose this could make it sound more “alive” and/or give it a dipole effect as the resonance would travel in all directions. You might consider this as a follow up video. Would be interesting, I think. Cheers!
Cool. Curious if you could put the speakers on the back side and aim the slightly up to reflect off the back wall like the Bose 901s. ? And what about siliconing the speakers to the glass instead of drilling ? Very cool project !
Make them liquid-proof, pour whiskey in there and take notes of how sound changes depending on the amount of alcohol left. Also try different sorts of liquor. PS: When your angry wife asks why the hell you're so drunk, tell her it's science.
Excellent idea excellent work. If I am going to try something like this I will try to make the bottle look like it is full of whisky. Either by painting the out side or the inside of the bottle maybe with a clear varnish. Is there a difference in sound by leaving off the bottle top?
Sounds so much clearer on bottle, but listening on phone speaker. Would cutting the bottom of the bottle off and mounting it into a small oak barrel/keg give the best of both worlds with bass and treble?
I love this project video and I want to attempt to make my own JD speaker. Could you supply me with a list of what I would need and where to purchase them ?
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
I think I saw this on Crafty Panda. Did they ask you for permission?
facebook.com/craftypanda/videos/130156035534824/
@@bahngsilog
Thank you for teaching me.
Facebook is copying my video.
I decided to deal with it as an illegal copy.
吸音材、入れていません。
I do not put a sound absorbing material in the bottle speaker.
選曲によって、大音量で鳴らすとガラスの共鳴する音が気になりますが、共鳴する音も心地よいです。
By selecting music, when you play loud sounds, you will be concerned with the resonance of the glass, but the resonating sounds are comfortable as well.
木材は柔らかく、ガラスは固くシャープな音質です。
Wood is soft, glass is hard and sharp sound quality.
どちらもいいと思います。どちらが良いかは好みの問題です。
I think both are good. Which is better is a matter of preference.
Depending on your musical taste I could see this in my house with a serious subwoofer hidden within a piece of furniture. Good one son.
cool that someone else is making experimental speakers as well! i made these beer can things and the resonating is "interesting" :D imgur.com/gallery/MJlpRPB
こりゃ甲乙つけ難いですね。
やっぱ瓶がガッチリしてるのがいいのかな？
基本的には聴き疲れしにくい低音ふくよか系が好みですが、時々スカッと抜けた高音が欲しくなりますし、メインがウッドで時々ガラスとか使い分けしたいです。
自作工房 I think two wood speakers and two bottle speakers. Then you have the best of both. Those bottles sound very good. Who would have thought.
id like a tool list to do this project
You should be very proud of this channel. Your calmness as you work is very relaxing to view. You are very creative.Thank You Sir.
Это не просто мастер, это демон какойто! Просто чудеса творит! Слов нет, одно восхищение работой. Даже звук не важен. Это колдунство какоето.
В бутылке звук лучше
@@ВладФахретдинов-ю3ы
А с двух бутылок - звук ваааще отпад! )))
木は温かみのある音で気持ちいけど、ガラスはガラスで高音が透き通ってて気持ちいですね。
お酒好きな人への贈り物で作ってみたいと思いました！
Всегда поражаюсь настойчивости и упорству людей, готовых потратить кучу времени и сил на производство очередной прикольной безделушки. Как когда-то говорили: "Чем бы дитя не тешилось, лишь бы не кололось".
I have to admit, this was incredible to watch, I was more than impressed. I mean who would've thought to use a JDs bottle, and make a set of speakers?? Although, I can see that, the glass is an excellent sound receptor, and the reproduction has got to be incredible!!!! Truly amazing to watch!!
冒頭のラベルを剥がすシーン・・・
The scene to remove the label at the beginning...
あれ、瓶の中に沸かしたばかりの熱湯が入っています。
There is a boiling hot water in the bottle.
熱でラベルの粘着力を弱め、ガラスクリーニング用のスクレーパーで剥がします。
Weaken the adhesive strength of the label with heat and peel off with a scraper for glass cleaning.
今までアップした工作動画の中で、この作業が一番難しいです。
This work is the most difficult of the videos released so far.
ラベル剥がしスプレー（雷神とか）結構良いですよ
heatgun is also usefull in removing that label.
@@スニフ-h4i それだと後で貼れなくなりませんか？
И что ты написал!? ты хоть сам понял?
He used hot water inside the bottle while removing label.
step 1: Drink all the Jack Daniels
Step 2: give up
Step 3: Repeat step 1
Lol that this project purpose
😂😂😂 give up give up🤣🤣🤣.... never ! ,give me another botle😂😂
*Step 2: Accidentally break the bottle when you drill it.
Fot nunny
@@oapa994 why not have quad?
A very intriguing project. I would say that the glass speakers suffer a bit from lack of low frequencies, but they seem to work surprisingly well. I suspect that there might be a resonance frequency inside the bottle due to the the tubular neck, but overall a really interesting project. I'm not sure that I would have the confidence to cut and drill a glass bottle like that. I really enjoy the wonderful imagination that you bring to these projects. I'm looking forward to the next one.
If it had a clear resin reinforcement it could be better on the low end by far
@@StygianBlood in what way would you resin the bottle to help? In my opinion,To mix some resin the right color,and set in along the inside, would finish the effect. Although,I like them.
Maybe a subwoofer in small wooden wine barrel can fill up the low end.
What I feel is the wood sound like all Instrument is more far away and the glass is more close and wide.
And ....ya the glass is lost low frequency.
Eines der wenigen Videos, indem professionell gearbeitet wird. Schön anzusehen
Glass rings like a bell. Wood dampens the resonance. Hit a glass bottle with a spoon, ding-ding. Hit a wood box, thud-thud. Thats why the glass bottles sound so bright. Very cool project. Would make for a great conversation starter.
Why doesn't 4in thick plexiglass make a ding sound?
Great comment 😂
ＪＳＫさん♪私は２５歳の頃よりウヰスキーは飲むのが好きでした ( 今でも晩酌は毎日ウヰスキーです ) が、この様な芸術品にすること事態が思いもつきませんでした。５００円硬貨が無かった頃にヤスリで擦って１００円硬貨が入るように穴を開けて貯金箱を作ったことが思い出されます。小さな穴はミニルーター用で有るのは知っていましたが大きな穴は如何に開けるのか？ニクロム線かなと思っていましたが有るんですね？大手のＤＩＹ店に行っても見落としていたのかな？もっと見て回りたいと思っています。いつも最高です。７０過ぎの爺じいですが大ファンです。
clarity on high note is excellent
It's not about music quality. This is art
今回も楽しく拝見させていただきました。
以前のガラス球体スピーカーでもそうですが、ガラス加工という根気が必要な作業を焦らず丁寧に進められている姿を拝見し、ものづくりに対する真摯な心意気を感じました。
どんなに素晴らしい加工技術があっても、作り出す作品に心を込めて、言い換えれば愛情を注いで作らなければ作品とは言えないかもしれません。
主観的な意見になっちゃいますが、自作工房さんが作る作品には、しっかりとした愛情と、作り出す責任感を感じます。
ただただ感服いたしました。
ところで、今回のダニエルスピーカーの再生時はキャップを外されておられましたが、キャップを締めた状態の密閉型として使用した場合、どのような音になるのかも気になりました。
もし余裕がございましたら、ぜひキャップ有り無しでの比較動画もご検討いただけないでしょうか。
Sono rimasto meravigliato da quante invenzioni che vengono realizzate di persone che hanno molte capacità di poter costruire progetti audio su bottiglie di liquore e quant'altro. Bravi e complimenti👏👏👏😁👍
こんな神々しいスピーカーは見たことがない！素敵過ぎます。
Very nice JD speaker build. The JD speakers sound great, from what I can hear from listening on my computer. I bet they sound even better in person.
Good Mother of Jesus! I never knew such thing is possible!
Jack Daniels in 3 *liters* bottles!!!
Only on cruise ships
Hahahahahaa
What you didnt knew OMG In germany they costs 75€
Jajajajaajajajajajaja 3lt of glory!!!
Steve Shartes I have a lot of big Jack's . In Santiago ,Concepción ,even in La Serena sales this bottle ,dude .
wood is warmer, glass is brighter. but it's so close it really doesn't matter, they both sound good 😊👍
Смотрю твое творчество и не устаю удивляться! МОЛОДЕЦ!!! Многое для себя открыл нового.
Very nice project. Like your idea!
Depending on your musical taste I could see this in my house with a serious subwoofer hidden within a piece of furniture. Good one son.
I am an audio expert and have never come across somthing like this, I love the use of everyday objects which has produced a sound like this, I have seen glass speakers before and glass does resonate at a different frequency but until this video i did not realise how much of a difference it makes... just wow... props to you dude (liked and subed)
PoshGaming must not be an Audio expert then....
Youre far from expert
If you're an audio expert how have you never heard of ceramic enclosures. The whole point of using ceramic is that it's more dense, and can have color. And it comes to Glass all you can do it tent it.
Hi poshGaming, I will like to inbox u privately
Hi guys, I'm a Nigerian with little experience in Acoustics. Please I want to further in my academics. Can anyone help me with information.
The sound quality of the speaker increases exponentially based on the consumption of the bottle's contents.
Hi there, excellent work. It is almost peacefully see this video. No hurries, no jumpy tasks, in few words, nice job. It seems to me, that you can paint inside the bottle with some wood paint in order to simulate the color of Jack Daniel's whisky. Covered with that, you can put some soft material, in order to avoid the hard surface of the glass. Greetings from Agua Dulce, Veracruz, México.
Great video true craftsmanship
発想自体が凄い！そう云えば昔、ジョーダン・ワッツって陶器で出来たスピーカーがあったので的外れでは無い！インテリアとじても素晴らしい。😉
Glass wins for high tones. Wood wins for low tones.
Glass will make the highs dumb bright
Add a sub!
I'd say wastage of time and money
One wood one glass!
Oak barrel sub?
チムニーダクト型バスレフスピーカーですね。蓋を閉めれば密閉になるのでさらに面白いですね。
Тот случай когда без бутылки не обойдешься ))). 👍
Тем более трехлитровый джек
Читали топовый коммент?
1. Выпить
2. Подумать
3. См. п. 1.
An interesting experiment, the glass is definitely better and cleaner.
相変わらずの丁寧なガラス加工、お見事です。
私の好みはマイク越しで聴いた感じだとこのダニエルスピーカーの方かもしれないです。
音の輪郭が掴みやすい感じです、キャップで蓋をして密閉型にできるのも面白いですね。
吸音材が無いのでハッキリした音ですよね。
なかなかいい音です。曲によってガラスの反響が分かりますが、不快な音ではないので好きです。
見た目もなかなか良いでしょ。
very good video to see how to work with glass.Two lamp shades and bulbs added on top of bottles would finish it off.One either side of bed.
Amazing work and the music 🎶 it’s so relaxing 😌
You are so good man ! Thanks for ideas !
丁寧な仕事をする方だ。なんだか素晴らしい。
Заглянул в магазин - за цену двух таких JD, пожалуй, можно прикупить что-то приличное и слушать без лишних заморочек)))
Но, скажу честно, я сам как-то пристроил два трехдюймовых динамика в пол-литровые банки. Отлично получилось. Звук гораздо интереснее , чем у того китайского недоразумения, откуда я их извлек, да.
You are a genius. Congratulations for so original and nice work.
This reminds me of when my grandfather made lamps out of bottles in the 70's.
素晴らしい, I'd crossover the bottles to be tweeters and use the wood speakers for the lows. Sit the bottles on the wood ones.
The sound is more comparable than I thought. I think the base holes in the front on the wood speakers gave it the advantage. Or at least helped
aren't the holes at the top of the bottles doing the same thing...?
スピーカーって面白い♪
同じユニットでも、エンクロージャーで全く違う音になる。
ギターで言うと、スピーカーユニットは弦で、エンクロージャーはギター本体って感じ。
スピーカーって楽器なんですね！
初めまして。
これは、いい勉強になりました！
自分も、工作好きで色々チャレンジしますが前のコメントにあった硝子用のホルソー初めて知りました！
今度、硝子スピーカー作り挑戦したくなりました笑
これからも、面白い動画頑張って下さい。
If anyone is planning to make their own speakers like this and live in a dry county, just send them to me and I will legally empty them for you and ship back. Because I'm such a nice guy, I will do this for you completely free of charge! 😏
393stroker bet it’s Arkansas.
Except the cost of shipping the bottles back, of course. Wouldn't want to rip you off, after all. ;)
this guy here.... taking one for the team.
I'm not in a dry place but I'll pay for materials lol that much jack would kill me
Ur address plz..
ガラス方がストレスなく聴けます。
響きがいいですね！
That is insanely cool. I thought making those bottles into lamps was difficult. Hats off to you! Very neat idea.
すごい。工作のレベル、編集のうまさ、BGMのセンスも。
素敵なスピーカーになりましたね。自分でもこんな技術があれば作ってみたい
Great idea, but as we know wood gives more soft and warm low tones and glass the opposite, so maybe try to make a speaker with wooden cabinet for bas speaker and with glass part for tweeters, then youll have best of both worlds :D
I'd twin these speakers into one system as they compliment each other.
wood have it's own fun & Glass have it's own but experience of glass is awesome
I had to close my eyes and listen with cupped ears to tell the difference. The glass does sound a little clear and higher than the wood which gives off a more rich base tone.
ジャックダニエルさんが手元にあったので早速自分もと思いましたが、僕が持っていたのは700mlボトルでした😲
4リットルボトルですって…！！！
ラベルを貼り直せるほど綺麗に剥がせる自信が無いので、やるなら先に丸く剥がしてからコアドリルかなあ…等と想像するのも良いですね。
... SIMPLY AMAZING!!! 😊
awesome job... Wood Enclosure all day for me... more natural with more dynamic range
Glass for highs and wood for lows I would keep both and please design something for mids too 😁
Just shows you that anything sounds good with a bottle of jack
絹のハンカチを1枚、中に入れると音ががらりと変わると思います。
The glass has a more lively sound, as if in front of you musicians! And the bass is alive!
I have a small CRT that's been nagging me to make a DIY speaker with.. seeing this has really made me want to do it.. thanks for the inspiration to do so..
Thanks for the very interesting build video. The sound comparison part is a bit suspect as there are two significant variables besides wood vs. glass. The wood enclosure appears to be much larger in capacity and it is ported. The F3 on a correctly ported enclosure is going to substantially lower (i.e., much more bass at lower frequencies) regardless of what the enclosure is made out of. It would be interesting to see an actual apples-to-apples comparison (same size and sealed) with RTA measurements. I would assume the glass has a resonance frequency(s) within the audible range that would be apparent both on a response graph and to the ear. I suppose this could make it sound more “alive” and/or give it a dipole effect as the resonance would travel in all directions. You might consider this as a follow up video. Would be interesting, I think. Cheers!
Looks very good.👍
ガラスの方が音の伝達が速いですね、ですから複雑なリズムの曲はガラスの方がリズムが遅れず正確で気持ちいいです。作ってみたくなりました。
素晴らしいです！ちなみにガラスだと音量出し過ぎると割れる心配はありませんか？
Cool. Curious if you could put the speakers on the back side and aim the slightly up to reflect off the back wall like the Bose 901s. ? And what about siliconing the speakers to the glass instead of drilling ? Very cool project !
Wood definitely amplifies the sound. But the JDs Speakers are sick AF! 🔥🔥🔥
Ну да прикольно!!! Даже захотелось и себе такие сделать)))
Я уже представил как кусочки стекла будут размётаны по всему дому, под кожей и скорее всего в глазах. Я уж лучше с деревом)
ヘッドフォンで聴かせてもらいましたがスカッとクリアでいい感じですね、でもやっぱり生で聴いてみたいなぁ
こういうチマチマした作業，大好きです♪
Try putting the lids on the bottles to see if the bass is any better. Very cool idea though.
That's real tight. Good job.
👍👍👍👍👍👍👍👍👍👍
正直、音は木の方が好みですが、インテリアとしてはガラス瓶、魅力的ですね。
Excellent work Mr JSK koubou.....
Jack Daniels speaker キャッチコピー
｢サウンドでも酔わせて見せるぜ・・・」
Really fun project. Thank you.
The glass has more presence and is the winner for me
キレのあるサウンドとインテリアとしてもカッコいい素敵なすスピーカーですね
他のボトルと並べるのも良さそうです
加工部位に漏水対策施して、ビン内部を（ウイスキーに見立てた）色付きオイル辺りで満たせば、更にオシャレ感倍増。
Can you post link where I can get the fasteners for the speaker to the glass.
Thank you.
Make them liquid-proof, pour whiskey in there and take notes of how sound changes depending on the amount of alcohol left. Also try different sorts of liquor.
PS: When your angry wife asks why the hell you're so drunk, tell her it's science.
I like the wood speakers sound a bit more, but this is awesome! Great video.
Can you post a parts list, especially the speakers that you chose?
めっちゃ好きです❤😂 スピカーを買うつもりだったんですが、真似して作ってみます😅👍うまく行けるかな〜〜初めてのガラス瓶DIY😂
ちなみに、ガラスに丸く穴を開ける器材英語で何って言いますか？
Excellent work.Best regards from Munich in bavaria/germany.
Es un producto de muy alta calidad si la suben a todo volumen pueden ver cómo explota 100% recomendable
Great idea and great work. Are they for sale?
Hey your creativity is a very awesome I like this but I want empty glass bottle if you possible
面白い！！！
注ぎ口がバスレフポートになるんでしょうか？？
そうです。
キャップを閉めると密閉型になりますよ。
昔にメーカー製の陶器？ボトル型？スピーカーがあった様な気がします。目と耳に魅力的なスピーカーですね素晴らしい。
Nice specialty tools I have all kinds of goodies and still don't have most of the tools you used...
🥃Cheers🍻
Very good job I really enjoyed this video thank you friend. You are a craftsman....
Одна бутылка этого виски в моей Cтране стоит больше, чем комплект нормальной акустики!
жиза
жиза
Можно купить две литровые водяры🤔
И врезать динамики в бутылки из-под недорогого алкоголя. Ну в донышко например🤔
@@5tarina Ну или на крайний случай две пластиковые бутыли из под пива. 😃
Правда качество звука будет. 😠 Только после выпитого и слушать.
Опа, русскоязычный люд
Excellent idea excellent work.
If I am going to try something like this I will try to make the bottle look like it is full of whisky. Either by painting the out side or the inside of the bottle maybe with a clear varnish.
Is there a difference in sound by leaving off the bottle top?
Wonderfulllllll liked 👌👍👍👍👍
Solo faltaba colocar el wisky en la botella 😁 sos un astro!!
Muito bom adorei o som estrelado
Glass creates real world sounds while on the other hand, the wood filters the natural sound that the speaker is supposed to produce.
Sounds so much clearer on bottle, but listening on phone speaker. Would cutting the bottom of the bottle off and mounting it into a small oak barrel/keg give the best of both worlds with bass and treble?
I love this project video and I want to attempt to make my own JD speaker. Could you supply me with a list of what I would need and where to purchase them ?
👏👌👏👌👏👌👏👌👏👌From Argentina 🙋🙋🙋🙋