This is for people who are just starting to check and recharge old lithium cells (this is an old video). I STRONGLY RECOMMEND GETTING AND USING THE THERMAL SENSOR for the B6 balancer/charger (or whatever unit you're going to use for this purpose). This can help prevent the "they can get hot and uh explode and cause issues" part of the testing and rejuvenation procedure. You can use velcro strip to affix the sensor to a cell you're charging and it will sound an alarm and stop charging at a temperature you select ahead of time. For example, if you set it for 150F then it will shut things down when the battery surface reaches about 150F. This will help prevent outgassing/venting, thermal runaway, and fires and "uh exploding". The sensor costs anywhere from about US$2.40 to US$6 and may ship for free depending on different factors. That is really CHEAP INSURANCE and well worth the few bucks it costs.
Please note that when he refers to four digit numbers and says "Amps", the correct term is "milli Ampere hours" abbreviated mAh. This is the cell capacity.
It's also a good idea to try to use cells with internal cell resistances that are close as possible. E.G. don't pair a cell with 63mohm internal resistance with a cell that has 300mohm internal resistance. The lower the internal resistance the better.
Sir you have done an outstanding job. I congratulate the...Im just waiting for my b6....hoping Canada Post does not go on strike. Once again it is great that we can all hear you loud and clear, and best of all in English..the universal language.
After fully charge the 18650 battery you have to leave it about 10 days to be sure they don't lose voltage.... And after that you discharge it to make capacity..
Yeah I agree waiting a bit of time to actually test them, I have a few 18650 that seem normal until we wait a few time and see that they are kaput, they keep self discharging like nuts so it's a battery to be charged and used right away only since after just 2 days it already lost quite a bit of voltage which makes it a very terrible energy storage source...
One of the first tests to run is the cell's internal resistance. You can do that immediately and it will tell you a lot about the health of the cell. You want cells with as low internal resistance as possible. Also see videos/blogs about "matching lithium cells" or "matching lithium batteries" and similar.
@@guily6669 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
@@exgenica Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Well yeah, that's sort of the way to do it... You should however probably leave them sitting for a couple of days and measure the voltage to see if they self discharge, since a battery that is empty after a week without you using it isn't necessarily particularly useful, not to mention Li-ion batteries can get quite dangerous in many situations including when they are internally shorted obviously.
I bought an IMAX B6 and keeping without knowing how to begin with this stupid manual which is useless for a beginner. Thanks today I charged , discharged and recharged my battery first time successfully with your very basic coaching video. Thanks a lot on behalf of all beginners.
I usually charge them in series and discharge separately. Quite often its good enough and the charging happens much faster. Its anyway damn slow to check 240 cells even somehow properly 😂
is their any fast way to test these bateries instead on one at, a time. I have imax charger. charging is easy but duschargibg need ine cell at a time. any solution ?
Hi there. FYI, milliamperes/hour means that you discharge the cell at 1 amp will return a realistic value in milli ampere hour. Discharging at 0.5 amps you would have to divide your results by two.
@@stefanoconca2403 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Thank you for taking time to explain how to determine the capacity of 18650 Battery. But, you confused me towards the last stages of your explanation. Your procedure was .. 1) Charge the Battery to 4.2V 2) Discharge the battery to 3.0V 3) Charge the battery back to 4.2 and determine the final reading of Battery amps. This was what i came to understand. Am I right? Please respond. Thanks and regards.
the charger displays the amount of amp hours it put into and takes out of the battery. so if you charge it the whole way and then discharge it to a safe low and is says it discharged 1000mah and then you charge it back up and it puts roughly 1000 back in then you have a 1000mah battery. it is not 100% accurate but it should get you close to it. now that being said there are chargers out there for $20 that automatically test the 18650 battery and tells you what the amp hours are without you having to do anything.
1:46 I see that your charger displays 3.6v at Liio charging mode but I think that that's wrong :P At my original SkyRC iMax b6ac (second gen) charger I set up the LiPo charging mode and with this charging mode I can charge my Lithium Ion cells to 4,2v. Until now I never got any problem with my harvested 18650 batteries Only the discharge process was done on the proper mode since I didn't want to turn any of the 18650's into some small flying rockets : P Btw. You have there a clone of the b6. The original iMax/SkyRC chargers doesn't have any EC or FC labels and they never would have this trash can since this product doesn't contain any batteries inside
You have made a mistake with your charging. LiPo and Lithium Ion ARE NOT the same. LiIo cells are 3.6v and LiPo are 3.7v. You should not use the functions for one of these to charge the other as they have different end voltages at both ends. You must use what is written on the battery to decide what cells you have. If you think the voltage is incorrect (because dishonest people sometimes resleeve the battery and they may have made a mistake) there are subtle ways of deciding which is which.
@@chrissybabe8568 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Why the first time it was drained was 1676mAh and the second time 2555mAh taking into consideration that in both cases the battery was completely full? Tks
IMAX B6 manual says it will take 10 discharge and charge process to get the full capacity of the battery. That's mean repeat discharge and charge will increase the capacity that's what you got.
@@dennisnilsson5430 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
@@ponkuna Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
The Li Io setting will take the cells down to 2.5V which would damage most cells including samsung ICR which will me defective below 2.75V. Did you manage to change the discharge voltage setting on the imax?
+elcykelguiden.se i did not change anything. i just went into the settings and selected li-ion setting and everything was preset. in all my test the batteries never went below 3 volts.
I deeply tested this charger with a 18650 and it does not perform very well: At 0.3-0.5A charge rate it can only charge up to 1100Mah (it's an older battery), I verified backward using discharge method too. I have a simple LiOn charger TP4056 module and the same battery it can charge up to 1500Mah. Again, I verified it by discharge. I measured everything twice.
1676 mAh vs 2555 mAh from the same old cell is an indication that the capacity improved after full cycle charge/discharge twice. This happens because the cell was discharged too far in the laptop battery and left in an excessively discharged state for a long time. The slow charge and discharge (twice) improved the fractal pattern of molecules on the plates. When cells are excessively low in voltage, it is best to charge at unusually low currents to improve the cell capacity.
@@avid0g Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
No i did not calibrate and 1 amp would be but they are old batteries and i probably wont draw 1 amp while using them. i was just testing to make sure they still worked .
The clone I bought showed up and didn't work. Someone had used the one shot calibration and all Lipo batteries were over voltage. Seller refunded $15 of $18. Figured I keep it for parts. Ordered a Sky RC imax B6 and it's getting used a lot.
@@mbennett972 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
I have several SLA 12 volt batteries of varies current ratings. I want to sort out good from bad. What would be the procedure to confirm the current capabilities using a imax B6. I just picked up a B6 mini. These a are Lead Acid 12 volt batteries used in Computer UPS back ups. The discharge current can't be set any higher than .5 amps due to the 5 watt max power rating of the imax. At lower voltage batteries I can get more current but higher the voltage the less discharge current is available P=IxE 5w = I x 12 volt 5/12= max discharge current. Is the method you used exactly the same for 12 volt SLA batteries?
i'd charge it at 100mA 0.1A not 0.5A thats way too much for charging a completely flat dead LI ION cell and then discharge to 3.3v then charge up to 3.6v but not 4.2v and repeat that a few times before charging all the way up to 4.2v then see if it stays close to 4.2v for a day. if it does then you revived the cell successfully. if it gets hot, blows up or the voltage just shoots up with no charge going in. then its junk get rid of it.
K.....So this how you figure the C rating???How do you figure the C rating? If I understand you correctly....keep it under 10C Then gradually increase the discharge rate.... Are there some type marking, code or equation. I can calulate C ratings???
@@oneeyemonster3262 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
so 1st u have to charge up to full to 4.10v, then discharge . write that number down . 2nd have to change up full again to 4.10v , then discharge again . and that number is the capacity ? what if first discharge it, then charge to full 4.10v? (whit this method I got just 1500 on a lgabb41865 what is should be 2500mA )
The last thing at the end of the video, you discharge the battery(cell), are you keeping the battery discharged until you use it, or you didn't show the last charge?
@@donaldm1156 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Hello . Replacing the nickel cadmium batteries in package from DRILL 18 volt batteries with 5 18650. How do I charge them on the Packet from the drill. # Chained 17.5 volts
@@sikas1956 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
@@robvannNS Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
I know this is old video/comment but to answer... I just setup one of the B6 memory allocations to set up my own parameters. That way I control the upper voltage, the min voltage, charging and discharging currents, etc. It also lets me compensate for inaccurate voltage readings by the B6. For example, to charge a Li-ion to actual 4.20V I set a memory slot to charge to 4.23V. I know it's not a lot, but it lets me also compensate for new version li-ion/LiPo cell parameters like discharging to 2.7V instead of 3.1V to which the B6AC V2 defaults.
Jose, nobody replied to you for a _year!_ series solution: Put several cells in series, but connect a _cell balancer_ to the cell/battery holder. Use a charger or dc/dc converter with both current limiting and voltage regulation. Set the charging voltage to [number_of_cells] * 4.1 Volts. Set the current limit to 0.5 Amps (or 500 mA). Make sure the balancer can handle the charging current that you set! You may also connect many cells in parallel, however, the current may not flow through all cells equally which will put more thermal load on some. One purpose of testing the cells is to determine this property! Also, it is very dangerous to put cells in parallel if their voltages are different. Very High currents may occur, causing some cells to charge far faster than their capacity. You may use some resistor or light bulb to limit current while adding another cell (in parallel) to the battery pack, but be sure to measure the initial current, and insure that the current level is safe.
@@avid0g Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Can someone explain why the displayed capacity is so far off from what you get by multiplying current by the discharge time? At 3:41 the results of the discharge shows that the capacity is 1676 mAh and the discharge time is 335 min. Shouldn't the capacity be 335/60*500=2792 mAh (discharge current was set at 0.5 A) ? Or does the charger use some pulse mode of discharging so the discharge current is actually lower? Or does the charger recalculates the capacity to the rated voltage of 3.7V?
THX for writing down the question. I am very interested in the answer, too! Besides I wonder why the the two capacity tests vary so much and why discharging at more Amps ends in more capacity?!
K....but how can you figure the C ratings. I ask becuase I want to use it R/C stuff. That's the different in me installing these batteries in a floater that will just cruiser around or a speed demon Wrong C rating in a speed demon might cause an explosion...just saying.
@@simpesfaip Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
I have problem with charge lead acid battery I have 30 ampere trasformer but when I charge the 100Amh battery only takes 5 ampere is there any circuit helps me to control current up to 30 ampere ?
So I am not sure if i completely understand your set up but my guess is the charger is only pushing 5 amps to the battery and so it will only draw 5 amps from your 30 amp transformer. So you cant charge your batter at 30 amps with that charger.
your charge to 4.1V and discharge to 3.0V this should be a difference of 1.1V, so if you have a 2200mA/h 18650 this mean you are using only 2.42WH of the total capacity of 9.24WH, I'm right or I'm missing something
Jose Garcia a better test would be using a mah meter and a load with thermal cam app for watching the battery. Jehu Garcia does this in one of his videos using a power inverter as a load. There are load testers in to $150 range to perform the same job but a bit more accurate and even loading
I ordered a genuine imax b6 i have lots of 18650 from old laptops, some are still at 3,6 V after a couple of years Big question is : is it dangerous to mix batteries from different laptops ? Of course those which have same everything after testing, same discharge amps, save voltages, same li-on technology ( not real english, i'm french )
yes, be careful they can be temperamental. do testing and don't let them charge unattended. as for mixing different one from different laptops i don't think there is an issue.
@@longjohson9052 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
This charger is not much good for best measure to nowaday Li-ions since their capacity nowadays according to the datasheet discharges to a way lower voltage and charge to 4.2 Instead of 4.1 unless you use LIPO setting which charge to 4.2v but the discharge rate doesn't go as low as the datasheet of most current LI-on. Though if we really want max cycles out of LI-Ion the IMax is the right charger since the more voltage they are charged and the lower voltage they are discharged the lower will be their life cycles... Though I heard there is a CFW for this IMAX but I think we need to solder a new connector on it...
@@tehdreamer Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
i have not had a problem with it. i like it. it works. the quality of it may be cheaper then what some people like. but for some one on a budget it is good.
yeah, the ones i saw complaining, have multimeters that cost more than my car xD. so their standards are probably too high . Thanks. i think i'll get one of those too :)
IT IS COUNTERFEIT! 1.) The genuine SKYRC iMAX B6 has GOLD plated output jacks for the 4mm banana plugs. 2.) It has a SKYRC logo printed on the upper right corner. 3.) A scratch off holographic sticker reveals a code that you can verify unit through SKYRC. 4.) The CE (for China Export), FCC & Don't Recycle tags are located on back of unit, not front lower right corner. 5.) The screws holding the body together are black not chrome plated. 6.) The counterfeit box doesn't even come close to looking like SKYRC's box (It's not black & doesn't have diagonal red slashes.) 7.) There are a whole slew of internal dissimilarities, too many to type, one though, gives false readings on the display screen which could be dangerous!! I hope I covered enough external dissimilarities to help you weed out the counterfeit chargers from the genuine item. Spending the extra money for the real deal may make the difference between "Home Sweet Home" and a FIRE GUTTED HOUSE!! It's YOUR choice to save a couple of bucks........Read more Show less
@@JustForFunRC Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Hi! I just bought an iMax B6 mini SKY RC Genuine to test some 18650 cell and others. Just a question for now if anyone can help: Considering a 18650 cell fully discharged. Charged to 4.1v it will receive 2356 mAh. Discharged to 3.1v it will supply 2587 mAh. Can anyone explain why it will give more mAh than it receives?
@@clipboard2290 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
strange i have an imax B6 ( i asume it is a clone ) and the discharge function stops at 120 min at 0.5A is there a setting to get it to keep going after that?
You've got a fake IMAX B6 charger...that's why you were getting DISCHARGE and CHARGE readings for the same battery NOT MATCHING. Your results are misleading you and will mislead you on the projects you have in mind. Look over again your unit and figure out why it is fake. Look for a serial number at the back which you can check on the web with the manufacturer. Good luck.
Nope, it does a constant current / constant voltage charge without pulses at max ~4.2A starting current on 6cell Pb-battery (discharged to 12v, below is not recommended) and can charge up to 10cell Pb-battery. Hope this will help you
@@Arapaima666 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
I know this is an old video/comment but to answer... There is a "System" setting in the B6 that let's you turn balancing on or off as desired. It comes in very handy when you're charging 2s1p packs that don't include a balance output. Of course, over time...charging mismatched cells without balancing can lead to fires or cell damage (that didn't result in a fire).
Also...keep in mind that the B6 manual says NOT to use the B6 to charge battery packs that have internal protection circuits...or at least my B6AC V2 stipulates that limitation...and some of the cells or packs you run into may have protection circuitry.
@@exgenica Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
the charger is capable of 50W charging power, so you can determine the maximum charging current for your battery with I(max) = 50W / Voltage of your battery. Always reffer to the datasheet of your battery if it can take the current! Hope this will help you
from talking to other guy's the charger should do all that math and mAh of the battery is supposed to be what the display showes. and thses batteries have more than 330 mAh of charge.
***** i have been just doing what everyone has been telling me. and the other thing is as it gets closer to the end the charge amps drops. so that would mean for the last 20 min or so it is charging slower so would that make your calculation off buy a little?
I just bought one for myself so when I get it I will try it out. Can you tell me what voltages the LiPo setting can be set at? I would like to be able to charge my 24V ebike which would be a bonus.
@@chompchompnomnom4256 Charger IMAX B6 Original, has the inscription SKY RC on the front, and silver label on the back! If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Hello, did you try to save a custom chargin program? I installed the chargemaster2.02 on two different computer but program crash and close when i save the program.
Charger Master V2.** is compatible with SkyRC charger SK-100069 1000W Charger Master V3.** is compatible with following SkyRC chargers SK-100089 D100 and SK-100097 D200 For the rest - Charger Master V1.** more on www.skyrc.com/blogger/183
Khemraj Deulkar if the cells are from a laptop battery the discharge rating might not be enough some 18650s are 1c and some are more 15c and higher. Try using a 12v lithium drill batter ect on it if they work it's because the drill batteries have a higher discharge rating
Look what I just found. It's for 33.99 USD with coupon code: FIN17MMX www.gearbest.com/multi-rotor-parts/pp_176503.html?wid=21&lkid=10659515 I bought one th-cam.com/video/uL1MyUTqHlc/w-d-xo.html
Use lipo me to charge them to 4.20v. That's what they are designed for. A real skyrc charger does charge them to 4.19v and not 4.22v what this one does.
The manual says LIPO is 4.2v max and LiIon is 4.1v max. I would definitely use the LiIon 4.1v because that's what the 18650 are, and everyone says a slightly lower charging voltage will greatly increase the life of the cell.
IT IS COUNTERFEIT! 1.) The genuine SKYRC iMAX B6 has GOLD plated output jacks for the 4mm banana plugs. 2.) It has a SKYRC logo printed on the upper right corner. 3.) A scratch off holographic sticker reveals a code that you can verify unit through SKYRC. 4.) The CE (for China Export), FCC & Don't Recycle tags are located on back of unit, not front lower right corner. 5.) The screws holding the body together are black not chrome plated. 6.) The counterfeit box doesn't even come close to looking like SKYRC's box (It's not black & doesn't have diagonal red slashes.) 7.) There are a whole slew of internal dissimilarities, too many to type, one though, gives false readings on the display screen which could be dangerous!! I hope I covered enough external dissimilarities to help you weed out the counterfeit chargers from the genuine item. Spending the extra money for the real deal may make the difference between "Home Sweet Home" and a FIRE GUTTED HOUSE!! It's YOUR choice to save a couple of bucks........Read more Show less
This is for people who are just starting to check and recharge old lithium cells (this is an old video).
I STRONGLY RECOMMEND GETTING AND USING THE THERMAL SENSOR for the B6 balancer/charger (or whatever unit you're going to use for this purpose). This can help prevent the "they can get hot and uh explode and cause issues" part of the testing and rejuvenation procedure. You can use velcro strip to affix the sensor to a cell you're charging and it will sound an alarm and stop charging at a temperature you select ahead of time. For example, if you set it for 150F then it will shut things down when the battery surface reaches about 150F. This will help prevent outgassing/venting, thermal runaway, and fires and "uh exploding". The sensor costs anywhere from about US$2.40 to US$6 and may ship for free depending on different factors. That is really CHEAP INSURANCE and well worth the few bucks it costs.
Please note that when he refers to four digit numbers and says "Amps", the correct term is "milli Ampere hours" abbreviated mAh. This is the cell capacity.
It's also a good idea to try to use cells with internal cell resistances that are close as possible. E.G. don't pair a cell with 63mohm internal resistance with a cell that has 300mohm internal resistance. The lower the internal resistance the better.
Sir you have done an outstanding job. I congratulate the...Im just waiting for my b6....hoping Canada Post does not go on strike. Once again it is great that we can all hear you loud and clear, and best of all in English..the universal language.
After fully charge the 18650 battery you have to leave it about 10 days to be sure they don't lose voltage....
And after that you discharge it to make capacity..
Yeah I agree waiting a bit of time to actually test them, I have a few 18650 that seem normal until we wait a few time and see that they are kaput, they keep self discharging like nuts so it's a battery to be charged and used right away only since after just 2 days it already lost quite a bit of voltage which makes it a very terrible energy storage source...
One of the first tests to run is the cell's internal resistance. You can do that immediately and it will tell you a lot about the health of the cell. You want cells with as low internal resistance as possible. Also see videos/blogs about "matching lithium cells" or "matching lithium batteries" and similar.
@@guily6669 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
@@exgenica Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Thanks so much for the video, it helped me get started as I'm trying my first project using old laptop 18650 cells to drive my ebike.
Well yeah, that's sort of the way to do it... You should however probably leave them sitting for a couple of days and measure the voltage to see if they self discharge, since a battery that is empty after a week without you using it isn't necessarily particularly useful, not to mention Li-ion batteries can get quite dangerous in many situations including when they are internally shorted obviously.
I bought an IMAX B6 and keeping without knowing how to begin with this stupid manual which is useless for a beginner. Thanks today I charged , discharged and recharged my battery first time successfully with your very basic coaching video. Thanks a lot on behalf of all beginners.
This is the only video that made sense to me
Thanks for sharing :) It is a pain staking job. Maybe there is a way to automate the process ?
A really good, simple video for really good simple people like me!
Great explanation of how to use the imax B6.
Cheers dude!
with ur procedure it took whole day to check 1 battery. i have more then 40 battries to be check
I usually charge them in series and discharge separately. Quite often its good enough and the charging happens much faster. Its anyway damn slow to check 240 cells even somehow properly 😂
Thanks, this was exactly what I needed to know!
use the pb discharge function. it let's you set the low end.
thanks for this. was very helpful. doing 1st charge now...
is their any fast way to test these bateries instead on one at, a time. I have imax charger. charging is easy but duschargibg need ine cell at a time. any solution ?
Hi there. FYI, milliamperes/hour means that you discharge the cell at 1 amp will return a realistic value in milli ampere hour. Discharging at 0.5 amps you would have to divide your results by two.
I think imaxB6 know this. It calculate the mAh, it's a microcomputer.
@@stefanoconca2403 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Gotta love 18650s, handy as!!!
Thank you for taking time to explain how to determine the capacity of 18650 Battery.
But, you confused me towards the last stages of your explanation.
Your procedure was ..
1) Charge the Battery to 4.2V
2) Discharge the battery to 3.0V
3) Charge the battery back to 4.2 and determine the final reading of Battery amps.
This was what i came to understand.
Am I right?
Please respond.
Thanks and regards.
the charger displays the amount of amp hours it put into and takes out of the battery. so if you charge it the whole way and then discharge it to a safe low and is says it discharged 1000mah and then you charge it back up and it puts roughly 1000 back in then you have a 1000mah battery. it is not 100% accurate but it should get you close to it. now that being said there are chargers out there for $20 that automatically test the 18650 battery and tells you what the amp hours are without you having to do anything.
is it neccesory to charge and discharge 2 times to check battery
Very Well Explained. Thanks a ton for sharing
1:46
I see that your charger displays 3.6v at Liio charging mode but I think that that's wrong :P
At my original SkyRC iMax b6ac (second gen) charger I set up the LiPo charging mode and with this charging mode I can charge my Lithium Ion cells to 4,2v.
Until now I never got any problem with my harvested 18650 batteries
Only the discharge process was done on the proper mode since I didn't want to turn any of the 18650's into some small flying rockets : P
Btw. You have there a clone of the b6. The original iMax/SkyRC chargers doesn't have any EC or FC labels and they never would have this trash can since this product doesn't contain any batteries inside
You have made a mistake with your charging. LiPo and Lithium Ion ARE NOT the same. LiIo cells are 3.6v and LiPo are 3.7v. You should not use the functions for one of these to charge the other as they have different end voltages at both ends. You must use what is written on the battery to decide what cells you have. If you think the voltage is incorrect (because dishonest people sometimes resleeve the battery and they may have made a mistake) there are subtle ways of deciding which is which.
@@chrissybabe8568 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Why the first time it was drained was 1676mAh and the second time 2555mAh taking into consideration that in both cases the battery was completely full? Tks
It's probably cause it's been sitting a while at under voltage... needs a couple of charge/discharge to work properly again.
IMAX B6 manual says it will take 10 discharge and charge process to get the full capacity of the battery. That's mean repeat discharge and charge will increase the capacity that's what you got.
@@dennisnilsson5430 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
@@ponkuna Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Bonjour, merci pour toute ces explications ;)
The Li Io setting will take the cells down to 2.5V which would damage most cells including samsung ICR which will me defective below 2.75V. Did you manage to change the discharge voltage setting on the imax?
+elcykelguiden.se i did not change anything. i just went into the settings and selected li-ion setting and everything was preset. in all my test the batteries never went below 3 volts.
I deeply tested this charger with a 18650 and it does not perform very well:
At 0.3-0.5A charge rate it can only charge up to 1100Mah (it's an older battery), I verified backward using discharge method too.
I have a simple LiOn charger TP4056 module and the same battery it can charge up to 1500Mah. Again, I verified it by discharge.
I measured everything twice.
the capacity of the battery you last measured was 2555. You have typed 1676 on the paper. which?
1676 mAh vs 2555 mAh from the same old cell is an indication that the capacity improved after full cycle charge/discharge twice. This happens because the cell was discharged too far in the laptop battery and left in an excessively discharged state for a long time.
The slow charge and discharge (twice) improved the fractal pattern of molecules on the plates. When cells are excessively low in voltage, it is best to charge at unusually low currents to improve the cell capacity.
@@avid0g Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
How long does it take to do all of those batteries? I think I rather buy new batteries, that's a little to much time for me.
Would agree 1amp discharge would be factory specs. Also, did you calibrate Imax? Good video. Just ordered a clone.
No i did not calibrate and 1 amp would be but they are old batteries and i probably wont draw 1 amp while using them. i was just testing to make sure they still worked .
The clone I bought showed up and didn't work. Someone had used the one shot calibration and all Lipo batteries were over voltage. Seller refunded $15 of $18. Figured I keep it for parts. Ordered a Sky RC imax B6 and it's getting used a lot.
@@mbennett972 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
I have several SLA 12 volt batteries of varies current ratings. I want to sort out good from bad. What would be the procedure to confirm the current capabilities using a imax B6. I just picked up a B6 mini. These a are Lead Acid 12 volt batteries used in Computer UPS back ups. The discharge current can't be set any higher than .5 amps due to the 5 watt max power rating of the imax.
At lower voltage batteries I can get more current but higher the voltage the less discharge current is available P=IxE 5w = I x 12 volt 5/12= max discharge current. Is the method you used exactly the same for 12 volt SLA batteries?
I like your video amd presentation. Quite neat and organised. Thanks!
thanks
So with this system your only able to test one Batt at a time ?
Cool. Thanks for posting! 🤯
Milliamphours mAh is capacity, not milliamps. Not the same at all.
Good instructions. .Thanks
very cool vid, thanks for the info..
Was looking for how to use & hookup batteries to the iMAX
one of the video.s on youtube is a review on fake imax,,it shows you how to calibrate it,maybe worth doing or viewing
i'd charge it at 100mA 0.1A not 0.5A thats way too much for charging a completely flat dead LI ION cell
and then discharge to 3.3v then charge up to 3.6v but not 4.2v and repeat that a few times before charging all the way up to 4.2v
then see if it stays close to 4.2v for a day. if it does then you revived the cell successfully.
if it gets hot, blows up or the voltage just shoots up with no charge going in. then its junk get rid of it.
K.....So this how you figure the C rating???How do you figure the C rating?
If I understand you correctly....keep it under 10C
Then gradually increase the discharge rate....
Are there some type marking, code or equation. I can calulate C ratings???
@@oneeyemonster3262 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
so 1st u have to charge up to full to 4.10v, then discharge . write that number down .
2nd have to change up full again to 4.10v , then discharge again . and that number is the capacity ?
what if first discharge it, then charge to full 4.10v? (whit this method I got just 1500 on a lgabb41865 what is should be 2500mA )
Is the charging rate and discharge rate different for healthy batteries.
Very helpful thankyou..
very helpful, thanks
No problem glad i could help.
Hi. Is there a faster way to do these tests. I have about 100 batteries
The last thing at the end of the video, you discharge the battery(cell), are you keeping the battery discharged until you use it, or you didn't show the last charge?
I didnt show that i put them in storage charge if i am not using them.
@@BeginnersTech314 Thanks
@@donaldm1156 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Hello . Replacing the nickel cadmium batteries in package from DRILL 18 volt batteries with 5 18650. How do I charge them on the Packet from the drill. # Chained 17.5 volts
if they are in series you would set it for lithium ion 5s or 5 cells.
5 cells bat the voltaz its4.2 V at 6000 A
@@sikas1956 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
When my discharge is complete, as soon as the buzzer goes off, it wipes the capacity value on the display back to "0000"
Good stuff. Cheers
This is not a genuine Sky RC charger,there are several videos that show this charger to be unreliable and inaccurate.
Any comments.
Yup.. Jehugarcia uses both ...makes me think both are ok.
th-cam.com/channels/cMfCkN1juSa49DJFYltOTw.html
@@robvannNS Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
If they were all good why did the laptop cell fail?
What's attached to the battery ends for the alligator clips to hold onto?
small magnets amzn.to/31ojc0c
On previous message i was wrong did not noticed you were xharging on li-ion program.But why they have end voltage 4,1 and not 4,2?
I know this is old video/comment but to answer...
I just setup one of the B6 memory allocations to set up my own parameters. That way I control the upper voltage, the min voltage, charging and discharging currents, etc. It also lets me compensate for inaccurate voltage readings by the B6. For example, to charge a Li-ion to actual 4.20V I set a memory slot to charge to 4.23V. I know it's not a lot, but it lets me also compensate for new version li-ion/LiPo cell parameters like discharging to 2.7V instead of 3.1V to which the B6AC V2 defaults.
so for checking one single cells it would take a lot of time, maybe 6hours what would you do for check 1000 cells
Jose, nobody replied to you for a _year!_
series solution: Put several cells in series, but connect a _cell balancer_ to the cell/battery holder. Use a charger or dc/dc converter with both current limiting and voltage regulation. Set the charging voltage to [number_of_cells] * 4.1 Volts. Set the current limit to 0.5 Amps (or 500 mA). Make sure the balancer can handle the charging current that you set!
You may also connect many cells in parallel, however, the current may not flow through all cells equally which will put more thermal load on some. One purpose of testing the cells is to determine this property!
Also, it is very dangerous to put cells in parallel if their voltages are different. Very High currents may occur, causing some cells to charge far faster than their capacity. You may use some resistor or light bulb to limit current while adding another cell (in parallel) to the battery pack, but be sure to measure the initial current, and insure that the current level is safe.
@@avid0g Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Good to me
I have a question what Voltage do you charge it up to and at what Amps? Same with Discharge?
He uses the Li-Ion programm to charge, so its up to 4.1V and charged with a current of 0.5A, discharge i dunno.
I wonder where the energy gone after the discharge a battery unit?
Turns into heat
Hi. As I'm monitoring my imax while discharging, it seems that from 1A it changes as it closes to end. Does this happened to yours? Thanks
yes as it gets close to the end the current will drop.
Can someone explain why the displayed capacity is so far off from what you get by multiplying current by the discharge time? At 3:41 the results of the discharge shows that the capacity is 1676 mAh and the discharge time is 335 min. Shouldn't the capacity be 335/60*500=2792 mAh (discharge current was set at 0.5 A) ? Or does the charger use some pulse mode of discharging so the discharge current is actually lower? Or does the charger recalculates the capacity to the rated voltage of 3.7V?
THX for writing down the question. I am very interested in the answer, too!
Besides I wonder why the the two capacity tests vary so much and why discharging at more Amps ends in more capacity?!
You should look at discharge curves. When cell hits 3.0v the current starts slowly decreasing. Because of that your calculated capacity is wrong
I have been told that the charger calculates the capacity. I have not tested that statement.
335/60=5,583 time is in 60parts. Metric is in 100's. That's why
K....but how can you figure the C ratings.
I ask becuase I want to use it R/C stuff.
That's the different in me installing these batteries in a floater that will
just cruiser around or a speed demon
Wrong C rating in a speed demon might cause an explosion...just saying.
for batteries 18650 I have to select Lipo or Liion?
LiIon
@@simpesfaip Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
I have problem with charge lead acid battery
I have 30 ampere trasformer but when I charge the 100Amh battery only takes 5 ampere
is there any circuit helps me to control current up to 30 ampere ?
So I am not sure if i completely understand your set up but my guess is the charger is only pushing 5 amps to the battery and so it will only draw 5 amps from your 30 amp transformer. So you cant charge your batter at 30 amps with that charger.
How did you get Lilo mode ?
ty
your charge to 4.1V and discharge to 3.0V this should be a difference of 1.1V, so if you have a 2200mA/h 18650 this mean you are using only 2.42WH of the total capacity of 9.24WH, I'm right or I'm missing something
Jose Garcia a better test would be using a mah meter and a load with thermal cam app for watching the battery. Jehu Garcia does this in one of his videos using a power inverter as a load. There are load testers in to $150 range to perform the same job but a bit more accurate and even loading
I ordered a genuine imax b6
i have lots of 18650 from old laptops, some are still at 3,6 V after a couple of years
Big question is : is it dangerous to mix batteries from different laptops ?
Of course those which have same everything after testing, same discharge amps, save voltages, same li-on technology
( not real english, i'm french )
Ok for parallel, series dangerous
I think should do with a lot of tests before, and precausions
yes, be careful they can be temperamental. do testing and don't let them charge unattended. as for mixing different one from different laptops i don't think there is an issue.
@@longjohson9052 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
This charger is not much good for best measure to nowaday Li-ions since their capacity nowadays according to the datasheet discharges to a way lower voltage and charge to 4.2 Instead of 4.1 unless you use LIPO setting which charge to 4.2v but the discharge rate doesn't go as low as the datasheet of most current LI-on.
Though if we really want max cycles out of LI-Ion the IMax is the right charger since the more voltage they are charged and the lower voltage they are discharged the lower will be their life cycles...
Though I heard there is a CFW for this IMAX but I think we need to solder a new connector on it...
My Imax b6 discharges li-ions down to 2.5v and charges to 4.2v. I guess it depends on the version.
@@tehdreamer Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
I keep hearing bad things about this charger. What's your opinion about it? is it that bad?
i have not had a problem with it. i like it. it works. the quality of it may be cheaper then what some people like. but for some one on a budget it is good.
yeah, the ones i saw complaining, have multimeters that cost more than my car xD. so their standards are probably too high .
Thanks. i think i'll get one of those too :)
Buy the IMAX B6AC V2, It is more accurate and have a built-in powersupply :)
IT IS COUNTERFEIT! 1.) The genuine SKYRC iMAX B6 has GOLD plated output jacks for the 4mm banana plugs. 2.) It has a SKYRC logo printed on the upper right corner. 3.) A scratch off holographic sticker reveals a code that you can verify unit through SKYRC. 4.) The CE (for China Export), FCC & Don't Recycle tags are located on back of unit, not front lower right corner. 5.) The screws holding the body together are black not chrome plated. 6.) The counterfeit box doesn't even come close to looking like SKYRC's box (It's not black & doesn't have diagonal red slashes.) 7.) There are a whole slew of internal dissimilarities, too many to type, one though, gives false readings on the display screen which could be dangerous!! I hope I covered enough external dissimilarities to help you weed out the counterfeit chargers from the genuine item. Spending the extra money for the real deal may make the difference between "Home Sweet Home" and a FIRE GUTTED HOUSE!! It's YOUR choice to save a couple of bucks........Read more Show less
@@JustForFunRC Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Hi!
I just bought an iMax B6 mini SKY RC Genuine to test some 18650 cell and others.
Just a question for now if anyone can help:
Considering a 18650 cell fully discharged.
Charged to 4.1v it will receive 2356 mAh.
Discharged to 3.1v it will supply 2587 mAh.
Can anyone explain why it will give more mAh than it receives?
You possibly charged it from a higher voltage than 3.1 Volt?
@@clipboard2290 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
strange i have an imax B6 ( i asume it is a clone ) and the discharge function stops at 120 min at 0.5A is there a setting to get it to keep going after that?
Yes. In the settings menu there is a safety cut-off timer. You can either extend the time or just disable it.
i will do a video about that.
1 = A cell. More than one cell = A battery (as in 'A battery of cells').
It is technically not possible to have a single celled battery!
Hello from Indonesia 🇮🇩🇮🇩🇮🇩 Let's help each other 🙏😊💓
You've got a fake IMAX B6 charger...that's why you were getting DISCHARGE and CHARGE readings for the same battery NOT MATCHING. Your results are misleading you and will mislead you on the projects you have in mind. Look over again your unit and figure out why it is fake. Look for a serial number at the back which you can check on the web with the manufacturer. Good luck.
I can help you, just open the rechargeable li-on mode to dùm I do not know how to open up ..lam Thank you help me .cam more
why 3.6v and not 3.7v ?? does IMAX have option for 3.6 and 3.7 separately??
it does but depending on the chemistry of the battery you do not want to charge it to 3.7.
Dam I paid more than that...does that mean they do not work
Can the I MAX B6 do pulse chaging on a lead acid battrie
i think it can not 100% sure
Nope, it does a constant current / constant voltage charge without pulses at max ~4.2A starting current on 6cell Pb-battery (discharged to 12v, below is not recommended) and can charge up to 10cell Pb-battery. Hope this will help you
@@Arapaima666 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
helo, how do i charge a Li-ion battery without connecting the balance port??
I know this is an old video/comment but to answer...
There is a "System" setting in the B6 that let's you turn balancing on or off as desired. It comes in very handy when you're charging 2s1p packs that don't include a balance output. Of course, over time...charging mismatched cells without balancing can lead to fires or cell damage (that didn't result in a fire).
Also...keep in mind that the B6 manual says NOT to use the B6 to charge battery packs that have internal protection circuits...or at least my B6AC V2 stipulates that limitation...and some of the cells or packs you run into may have protection circuitry.
@@exgenica Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
what if i have a 25amp batery can i charge at the charger 5amp max
the charger is capable of 50W charging power, so you can determine the maximum charging current for your battery with I(max) = 50W / Voltage of your battery. Always reffer to the datasheet of your battery if it can take the current! Hope this will help you
460 minutes is 7.66 hours. So 2550mA / 7.66h = 333mAh. That's the capacity of the battery
from talking to other guy's the charger should do all that math and mAh of the battery is supposed to be what the display showes. and thses batteries have more than 330 mAh of charge.
It seems to be counting up slowly from the beginning and over the full 460 minutes rather than working it out at the end
***** i have been just doing what everyone has been telling me. and the other thing is as it gets closer to the end the charge amps drops. so that would mean for the last 20 min or so it is charging slower
so would that make your calculation off buy a little?
I just bought one for myself so when I get it I will try it out. Can you tell me what voltages the LiPo setting can be set at? I would like to be able to charge my 24V ebike which would be a bonus.
@@chompchompnomnom4256 Charger IMAX B6 Original, has the inscription
SKY RC on the front, and silver label on the back!
If there is no SKY RC inscription on the front and no silver label on the back, it means it is a Counterfeit IMAX B6 charger: th-cam.com/video/dF1HGRfpaVI/w-d-xo.html
Hello, did you try to save a custom chargin program? I installed the chargemaster2.02 on two different computer but program crash and close when i save the program.
no i did not
Charger Master V2.** is compatible with SkyRC charger SK-100069 1000W
Charger Master V3.** is compatible with following SkyRC chargers SK-100089 D100 and SK-100097 D200
For the rest - Charger Master V1.**
more on www.skyrc.com/blogger/183
We r using Samsung 18650 3s battery but we r unable to fly our drone
Well First off what type of drone do you have?
Beginner's Tech Quadcopter with 1000kv bldc motor and 750 frame
Khemraj Deulkar if the cells are from a laptop battery the discharge rating might not be enough some 18650s are 1c and some are more 15c and higher. Try using a 12v lithium drill batter ect on it if they work it's because the drill batteries have a higher discharge rating
yeah if you are trying to use laptop batteries I doubt they will work
thats one of those cheap Fake Clone Imaxb6 off ebay for $14
Look what I just found. It's for 33.99 USD with coupon code: FIN17MMX
www.gearbest.com/multi-rotor-parts/pp_176503.html?wid=21&lkid=10659515
I bought one
th-cam.com/video/uL1MyUTqHlc/w-d-xo.html
have my clone for 3 yrs with it working perfectly. my vom agree's with the chargers displayed voltage reading.
1. Use LIPO mode
2. Get a real SkyRC charger and not that piece of junk.
1. these batteries are not lipo batteries they are lion.
2. this charger works great so i dont need another one.
3. please subscribe :)
Use lipo me to charge them to 4.20v. That's what they are designed for.
A real skyrc charger does charge them to 4.19v and not 4.22v what this one does.
The manual says LIPO is 4.2v max and LiIon is 4.1v max.
I would definitely use the LiIon 4.1v because that's what the 18650 are, and everyone says a slightly lower charging voltage will greatly increase the life of the cell.
it doesn't make a big difference in lifetime
IT IS COUNTERFEIT! 1.) The genuine SKYRC iMAX B6 has GOLD plated output jacks for the 4mm banana plugs. 2.) It has a SKYRC logo printed on the upper right corner. 3.) A scratch off holographic sticker reveals a code that you can verify unit through SKYRC. 4.) The CE (for China Export), FCC & Don't Recycle tags are located on back of unit, not front lower right corner. 5.) The screws holding the body together are black not chrome plated. 6.) The counterfeit box doesn't even come close to looking like SKYRC's box (It's not black & doesn't have diagonal red slashes.) 7.) There are a whole slew of internal dissimilarities, too many to type, one though, gives false readings on the display screen which could be dangerous!! I hope I covered enough external dissimilarities to help you weed out the counterfeit chargers from the genuine item. Spending the extra money for the real deal may make the difference between "Home Sweet Home" and a FIRE GUTTED HOUSE!! It's YOUR choice to save a couple of bucks........Read more Show less
.
Fake Imax B6.
IMAX Clone Beware !!