I appreciate that. I try to record these videos with the mindset that this may be the first time someone has seen one of my videos and they haven't heard these tips before.
awesome newbie retired guy here, have a nice woodshop onthe property that was already to go with table saws and drill press and others. l added this nailer will have tomorrow, Cant wait to start this build and make one see how it looks then add to my spring selling of basic planter boxes. should go well here in NC. thanks and great lesson
Great safety advice! wait for the blade to stop moving. some of the newer machines with soft stop really helps, but it's still the same. I learned that from my grandfather who worked with table saws and other tools his whole life and never had an injury. It does add a few extra seconds to each cut but the savings in safety are worth it.
Thank you! I'm always worried because I share similar ones on every video, but it may be the first time someone has seen that tip, so it's worth it. I appreciate the support.
I have an idea for the left over pieces from the top of your pickets. Use them as tomb stone decorations for halloween. A picket top and a 1 1/2 leftover piece would make good yard ornaments, especially if you stained them with some grey stain and put RIP or a saying such as "Here lies George Johnson 1882 - He was right, We was Wrong - But we strung him up and now he's gone" ( this is from the Tombstone , AZ graveyard). There are plenty of humorous tombstone sayings on the internet.
Simple and to the point - I like it. I do like to do a light sand on fence pickets to knock down the resawn a bit, I think it really makes it look like a different more expensive material.
I did woodworking for a living many years ago and am now looking to get back into it. What I found was that if you are creating items that are built as they are ordered you have to charge a lot more. This is because you have the same overhead to set up the tools and clean up for every build. On the other hand if you can build items in batches the time per unit drops dramatically (and your hourly rate increases dramatically). I can see where building one of these planters takes under an hour but I'd estimate a batch of 3 (or maybe 4 planters) could be built in the same hour. So it really comes down to understanding your product and your market. In my opinion if you are making a single unit, even if you have built them before, price it as "Custom" work. But keep in mind if you build in batches you must also have a market and a distribution channel to sell the products so you don't end up with a bunch of unsold inventory.
Absolutely true. When I was building these for income, I typically built them 10+ at a time. I sold the first few within an hour of posting them, so I knew they would sell well in my area.
@@cedarriverwoodworking I’ve had too many glue joints fail in the past. I’m sure the glues today are a lot better than they used to be. I’m big on using bracing when I can Thanks again !!!
@@cedarriverwoodworking Titebond 3....noticed that right off too. You are using the correct glue for the job, I go through gallons of that stuff every year in my shop.
Great build. I didn’t sell very many of my 3 tier planters this year. After looking at yours I think I need to adjust my angle a bit. I think mine are bit too big. However I did sell enough of my other ones that I pretty much paid for a Festool Kapex after my Bosch broke on me.
I had a question about longer term durability. If you are putting soil and water directly into the boxes (with no plastic liner, etc), won't the cedar rot and fall apart? I'm kinda new to woodworking and wasn't sure about how durable cedar is with long-term exposure to moisture and the outside elements.
That's a great question. I have several that are 4 years old and have held up great. Cedar is naturally rot resistant, yes overtime everything will decay, but at $12 a piece these easily out live their cost.
That's a really cool design. I would move the 2 side braces inside. Makes the project a little thinner for storage/moving and less likely to catch on things. Plus then it can support a shelf. I would price it at $65-75 here in Dallas
Nicely done. I build western red cedar planter boxes every year (larger ones) and do around 100 to 200 a year. I suspect that where I am at in Canada, I can sell these for $100 each. That said, 4 6' fence pickets here will cost closer to $32.00.
@@cedarriverwoodworking $32 Canadian, yes. Planter box season is pretty much over here for now but maybe I'll do a short video, mainly of photos from some of my builds. 6 years ago I too used fence pickets mainly. Now though I've been using premium 5/4 cedar boards instead for a more heavy duty buildup. I tend to make $50 to $70 an our from them.
@@cedarriverwoodworking Cost more but not that much for me. My supplier gives me an awesome deal on it. Ben buying western red cedar from them for 16 years now including lots of the 100% clear stuff I use for building custom paddles with.
Did you buy the Dewalt 780 dual bevel sliding miter saw. I thought you said you did? I want to buy one but I am seeing a lot of poor reviews. I was wondering if you bought it if you like it I see you are still use the Hercules saw .
Great build! Do you find that with the weight of the soil and water that the lower 2 boxes have any issue with stability? While you were building, I was thinking that maybe moving the brace between the two uprights from the outside of the leg to the inside under the 2nd box would offer more support and maybe adding one along the bottom under the bottom box would do the same?
I had to look up those acronyms. I like a miter saw better because I can start the cut at the front of the board and it drives the piece into the fence, where as a Radial arm saw has a tendency to drive the saw head towards you.
It's a side gig when I was doing these. Plenty of money to buy a few festool tools. Now the side gig is dining room tables with those tools. Just need to know your goal.
I completely understand, I just want to make these videos as if its the first time a beginner has seen one of the videos. The goal is to make these kinds of project the least intimidating that I can. I appreciate the support.
I value your opinion. However, I make these videos based on beginner projects. I provide the tips and explanations as if this would be the first video that a beginner would see.
how refreshing to find a channel without annoying background music...makes the video enjoyable...thank you! I hope u never change your format.
I actually started that way. There are a few videos that I will be remaking to git rid of the music. I appreciate the support.
You are NOT too wordy. Some people appreciate the explanations! Thumbs up from me
I appreciate that. I try to record these videos with the mindset that this may be the first time someone has seen one of my videos and they haven't heard these tips before.
I agree Andrew
Exactly !!!
👍 nice build . Nice that you are willing to communicate with your audience,no bs music . Just what we need . Simple builds with great detail .
Cheers
Thank you for the support. I have a few videos that I am looking to remake because they weren't clear or they had some dumb music over them.
awesome newbie retired guy here, have a nice woodshop onthe property that was already to go with table saws and drill press and others. l added this nailer will have tomorrow, Cant wait to start this build and make one see how it looks then add to my spring selling of basic planter boxes. should go well here in NC. thanks and great lesson
Congrats on the retirement! it sounds like you will be all set up.
Great safety advice! wait for the blade to stop moving. some of the newer machines with soft stop really helps, but it's still the same. I learned that from my grandfather who worked with table saws and other tools his whole life and never had an injury. It does add a few extra seconds to each cut but the savings in safety are worth it.
Thank you! I'm always worried because I share similar ones on every video, but it may be the first time someone has seen that tip, so it's worth it. I appreciate the support.
I have an idea for the left over pieces from the top of your pickets. Use them as tomb stone decorations for halloween. A picket top and a 1 1/2 leftover piece would make good yard ornaments, especially if you stained them with some grey stain and put RIP or a saying such as "Here lies George Johnson 1882 - He was right, We was Wrong - But we strung him up and now he's gone" ( this is from the Tombstone , AZ graveyard). There are plenty of humorous tombstone sayings on the internet.
I absolutely love this idea! Thank you so much!
Simple and to the point - I like it. I do like to do a light sand on fence pickets to knock down the resawn a bit, I think it really makes it look like a different more expensive material.
Thank you. I appreciate the support.
Great way to start a friday. A project and product review. Thanks much
Thank you. I appreciate your support.
I did woodworking for a living many years ago and am now looking to get back into it. What I found was that if you are creating items that are built as they are ordered you have to charge a lot more. This is because you have the same overhead to set up the tools and clean up for every build. On the other hand if you can build items in batches the time per unit drops dramatically (and your hourly rate increases dramatically). I can see where building one of these planters takes under an hour but I'd estimate a batch of 3 (or maybe 4 planters) could be built in the same hour. So it really comes down to understanding your product and your market. In my opinion if you are making a single unit, even if you have built them before, price it as "Custom" work. But keep in mind if you build in batches you must also have a market and a distribution channel to sell the products so you don't end up with a bunch of unsold inventory.
Absolutely true. When I was building these for income, I typically built them 10+ at a time. I sold the first few within an hour of posting them, so I knew they would sell well in my area.
@@cedarriverwoodworking if you don’t mind my asking what were the top two or three places you posted your work that got the most sales?
Great to see you again Andy. Love the plant stand. I might move the side braces to the inside to help support the boxes. Just my opinion. 👍👍
The glue normally holds up really well for them, but I do like that suggestion. I appreciate the support.
@@cedarriverwoodworking I’ve had too many glue joints fail in the past. I’m sure the glues today are a lot better than they used to be. I’m big on using bracing when I can Thanks again !!!
I was thinking the exact same thing when watching that part of the video.
@@cedarriverwoodworking Titebond 3....noticed that right off too. You are using the correct glue for the job, I go through gallons of that stuff every year in my shop.
@@JoeOsChannel I use a ton from cutting boards and planters too.
like the fact that you take the time to explain as you construct;;;;enjoyed;;;;thumbs up from here;;;
originally I was worried that it would make my videos too long, but I try to do it so that everyone can follow along. I appreciate the support.
Good Information on building
Thank you. I appreciate the support.
I like that you explain every step and why. Using layman’s terms.
I'm glad you liked it and I appreciate the support.
Great build Andy! Thanks for sharing! Also thanks for the pricing info! I would leave them unfinished!
So great to see you comment, even after a long break. As always I appreciate the support.
Nice brad nailer.
Thank you. I like it so far.
Great build. I didn’t sell very many of my 3 tier planters this year. After looking at yours I think I need to adjust my angle a bit. I think mine are bit too big. However I did sell enough of my other ones that I pretty much paid for a Festool Kapex after my Bosch broke on me.
Staging is very important, but that's great to hear that you were able to afford a very nice saw with your sales.
Thanks Bro!
No problem!
Killer hat man!!
I got it at this awesome tattoo shop in Burlington, IA called Destination Ink. I would highly recommend checking them out.
Nice! Thyme, oregano, mint and basil would be my choices for herbs
Those are great choices.
I had a question about longer term durability. If you are putting soil and water directly into the boxes (with no plastic liner, etc), won't the cedar rot and fall apart? I'm kinda new to woodworking and wasn't sure about how durable cedar is with long-term exposure to moisture and the outside elements.
That's a great question. I have several that are 4 years old and have held up great. Cedar is naturally rot resistant, yes overtime everything will decay, but at $12 a piece these easily out live their cost.
It would be cool to Laser Engrave a saying, name, what plants in it, etc. On the front of the boxes
I really like this idea,
That's a really cool design.
I would move the 2 side braces inside. Makes the project a little thinner for storage/moving and less likely to catch on things. Plus then it can support a shelf.
I would price it at $65-75 here in Dallas
Thank you for the share. Great video presentation
This is Why I love having this community. This is how I've been making them for years and totally missed that part. I appreciate the support.
@@cedarriverwoodworking it's a wonderful design you have. Thank you for the share
Nicely done. I build western red cedar planter boxes every year (larger ones) and do around 100 to 200 a year. I suspect that where I am at in Canada, I can sell these for $100 each. That said, 4 6' fence pickets here will cost closer to $32.00.
That's some very good profits, I would be interested to see what they look like. is that $32 Canadian?
@@cedarriverwoodworking $32 Canadian, yes. Planter box season is pretty much over here for now but maybe I'll do a short video, mainly of photos from some of my builds. 6 years ago I too used fence pickets mainly. Now though I've been using premium 5/4 cedar boards instead for a more heavy duty buildup. I tend to make $50 to $70 an our from them.
@@JoeOsChannel 5/4 boards are a much better choice.
@@cedarriverwoodworking Cost more but not that much for me. My supplier gives me an awesome deal on it. Ben buying western red cedar from them for 16 years now including lots of the 100% clear stuff I use for building custom paddles with.
MERICA 🇺🇲 💪 🦅
Appreciate you're knowledge brother
I appreciate the support.
Natural especially if you plan on growing anything you are going to eat.
That's my thoughts too.
@@cedarriverwoodworking I have everything I need for making a few of these in the shop right now. Except enough motivation on a Saturday night.
@@brodrick3164 I feel that.
I would put succulents in the box .Nice sized planter.
It's wonderful for them
The video shared is very good and useful
Thank you.
Paint them red, white , and blue to match the French cleat wall.
I like it!
Did you buy the Dewalt 780 dual bevel sliding miter saw. I thought you said you did? I want to buy one but I am seeing a lot of poor reviews. I was wondering if you bought it if you like it I see you are still use the Hercules saw .
The Hercules is identical to the 780. There may be some inferior parts on the Hercules actually but it does very well.
Great build! Do you find that with the weight of the soil and water that the lower 2 boxes have any issue with stability? While you were building, I was thinking that maybe moving the brace between the two uprights from the outside of the leg to the inside under the 2nd box would offer more support and maybe adding one along the bottom under the bottom box would do the same?
Many people have suggested that and I think i like that idea too. The single brace seems to be enough for any stability issues.
I really struggle with my area and demographic of people. I assume most of it was local sales?
Yes they were all local sales.
I have thyme mint and basil in mine
Those are great herbs to have around!
👍🏻 herbs or even strawberries would work
I like the idea of starting strawberries in them.
I think I would put water sealer on it before selling
Many people are concerned about toxins, what one would you use?
@@cedarriverwoodworking minwax penetrating woodstain I think.
top of fence picket scraps make into TOMBSTONES, HALLOWEEN
I love that idea!
Went to your Etsy store the plans were not there
There are no plans for this one.
Just curious as to how much you charged for this planter. I made some in the spring, and they didn't sell very well.
I do go over that in the video.
@@cedarriverwoodworking got it. Have a great day
My bad, they are there
Were there others that you were looking for?
I'd put an Outdoor stain on it. Just like ,y fence
I haven't heard of y fence, but I will check it out. I really appreciate all of the comments.
Why a SCMS rather than a more useful RAS?
I had to look up those acronyms. I like a miter saw better because I can start the cut at the front of the board and it drives the piece into the fence, where as a Radial arm saw has a tendency to drive the saw head towards you.
Thyme, cilantro
Good choices.
*Nice Build, but Kinda late in the season.*
Oh I know but they can be used indoors under grow lights too. I have some more indoor projects coming soon.
You’ll never survive in business at that price, too cheap …
It's a side gig when I was doing these. Plenty of money to buy a few festool tools. Now the side gig is dining room tables with those tools. Just need to know your goal.
Dude I like where you are going. You spend too much time explaining every detail and safety measure. Give me the overview and let me move on.
I completely understand, I just want to make these videos as if its the first time a beginner has seen one of the videos. The goal is to make these kinds of project the least intimidating that I can. I appreciate the support.
You are way too wordy. Over explaining the simplest procedures.
I value your opinion. However, I make these videos based on beginner projects. I provide the tips and explanations as if this would be the first video that a beginner would see.
I think you did just fine . thank you for all the explanation
You get it he 780 dealt pi looking to buy one see lot of bad reviews are you liking it
I'm sorry what?