Building the TotalBoat Sport Dory: Episode 23 - Fastening the binder strake
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- It's time to fasten the first binder strake onto our TotalBoat Sport Dory. We glued the scarf together on the boat and that's very important so that the angle between the two boards is exactly right. If that was off even one degree the plank wouldn't fit when we bend it into position.
With the glue dried we can take the plank over to the bench and touch up the scarf with an electric plane and then a block plane. Then we'll bring the plank back over to the boat for one last dry fit to get our clamping procedure worked out. Once that's done it's time to apply some poly-sulfide. We're going to apply a few beads to the transom and the stem where the plank will contact it and also to the broadstrake where the binder strake will overlap it.
Once we get the piece clamped into position it's time to fasten it down. We're going to work our way from the middle fastening toward each end of the plank. Before we drill we want to apply an additional clamp to the frames so that they are pulled up tight against the inside of the plank. Then we can drill and sink our screws through the overlapping planks and into our plastic frames. We're going to put one more screw into each frame 3 inches up from the batten that way when remove that batten the frames will still be held in their proper position.
Subscribe to Tips from a Shipwright on TH-cam for more episodes of the Sport Dory series and sign up for our email list at
www.tipsfromash...
Help support the channel with a Tips from a Shipwright T-shirt www.tipsfromash...
/ tipsfromashipwright
/ louissauzedde
Subscribe to TotalBoat for product info and other how-to videos: www.totalboat.com
www.jamestownd...
I love the fact that you can say it’s a struggle and then talk about how you can help work it out. It’s awesome to see someone so calm and humble.
You're a gentleman and a scholar!
I look forward to every episode you guys put out. Great job!
Another outstanding video. Really enjoy watching you work and see that you are willing to say when you have to change the direction of the build due to some unforeseen issue that comes up. You instruction in using the block plane was a joy to watch. Learned a few more ways to do things.
I love the way you solve problems and the way you innovate. Pure skill and knowledge cannot be beat. have fun in Chile.
Every presidential candidate should demonstrate the sanity and self-control needed to build a wooden boat or some equivalent task. Seems to be an excellent way to weed out the BS artists.
I know a president who would build the best boat ever. It'd attract the biggest crowds ever seen for its launch.
Enough with the stupid boasting, where is the boat?
Rico S is parodying POTUS
YES! Bankers and lawyers too. Oh, CEO's especially.
Dang, Lou, I look at you cut that wide chamfer with a block plane, concentrating on one edge and then the other and think, how come I never thought of that? The two aspects of your shows that I am very grateful for are these little tips and the fact that you are always attempting something new and saying flat out you've never done it this way before. These are the exact things I love about working on projects.
Excellent lesson for life: Rational thinking and action backed up by experience.
I've been watching Louis's videos for some time now, and today I realised why they are so enjoyable to someone who knows little or nothing about boats and boat building. Its because he explains each step as he does it, giving the reasons for and against different methods, which appeals to the engineer in me - and I guess many others. There is also the attraction of watching a master craftsman as he so deftly achieves desired results with a few strokes of his tools, and today, NOT complaining about difficulties he created for himself as he works, but afterwards 'fessing up to the fact that he will make some changes to ease problems on future planks.
This video is full of great tips and advice. Thank you for sharing. Tips from a Shipwright is my most favorite TH-cam channel. :)
I've noticed that Louis always screws things down. I always screw things up😬
This stuff should be sold to NETFLIX im not a boat person but this is fantastic
One of the great modern ironies is that the Internet has exposed and reinvigorated ancient crafts. Shipwrights have existed since pre-history. Lou is a national treasure.
Great information Lou! For the clamps, did you consider drilling lightening holes in the molds at strategic points to accept one of the clamp pads? Seems like I've seen that done on canoe molds. www.greenval.com/planking4.jpg (image:greenval.com)
And I believe it was Pete Culler who said "Mostly, boatbuilding is simply correcting one mistake after the other, and possibly the first mistake is to begin....but it's so much fun." :)
As a young man I would continue to struggle rather than take the time to correct the problem. These last 20 years my patience has improved and so have my results. You are teaching young craftsmen important lessons while entertaining and inspiring them.
I’m sticking with it!
Oh no! I just watched season one and now season 2 and I caught up to the current progress! Now I have to wait for these amazing videos. Well at least I can get some work done now.
There is a dory building at Shelburne Nova Scotia , Canada . All wood on the dock very large harbor world's 4th largest . This is where many British Loyalists evacuated to in November 1783 my 8 time grandparents Finlay McIntosh his wife and two brothers from the 76th Tenement of foot landed . Shortly after they took one of the 17 ships out for a fishing trip planned for three weeks they returned the next day ful to the brim with Cod fish they used Dory boats to catch the fish .
Scott from N.H.
Again. Incredible skills and teaching abilities.Who's gonna fill his shoes?Thank you for all you bring to the table Sir!
I would like to know the reason that slotted screws are used, my guess would be they are easier to remove if need be, easier to clean out a slot rather than other types. I love your show and boy have I learned allot, your wood working skills are like poetry.
Traveller you are exactly right. Lou went into detail about using slotted bronze screws in another video- I want to say it was the Herreshoff rebuild.
Another great video, Lou. Your narration is spot on. Although you did not mention it, I picked up the useful trick of using your finger on the edge of the plank to guide the polysufide nozzle. Would not have done that without the good eye of your camera person. Thank you for another enjoyable episode.
Halsey is a fantastic videographer! The shots of you planing the bevel with your block plane are really awesome
Lou, would a compass plane work on the concave edges of the planks. You can adjust it to match the curve either inside or outside. I have a Stanley #20 that I use on curved railings, works well.
What's better than bench dogs or 20# lead weights. Holdfasts.
enjoying the series. interested in hearing about the south america trip. That got me thinking about boats from other countries. For your next project I'd be interested in seeing either a Thai long-tail boat or a Chinese Junk being build. I can't seem to find too much information about there about how those are built.
louis uses a small block plane like most men use 400 grit to refine their work. he is just an amazing craftsman.
Problem solving, just part of the job, this guy is king
Slippery frames for clamping .. throw a bit of rubber or an old flip flop inside the clamp?
Great videos. Look forward to seeing them. Thank you.
I love the Boat, but certainly not enough to row to Chili...
Love the series. Do you ever do any sanding?
Can you be more specific on this polysulphait bedding compound? Is it butyl or similar? What brand is it?
I found it after a bit of detective work... here it is:
www.jamestowndistributors.com/userportal/show_product.do?pid=2770&familyName=BoatLIFE+Life-Calk
BoatLIFE Life-Calk is a long lasting, permanently flexible marine polysulfide sealant that can be sanded, painted and used above and below the waterline. Tack-free in 1 to 3 days, curing in 7-10 days (weather dependent). This sealant exhibits excellent resistance to teak oils, gasoline and diesel fuel.
Polysulfide, a classic sealant. BoatLife is the brand. For those doing plywood planks and wanting epoxy, Jamestown Distributors has THIXO 2.0 in wood color.
I'm curious about the washer visiible toward the bow.
I'm betting on it's a clamping screw - train the ornery wood to settle into the bedding compound.
Fender washer to increase holding surface area, so the temporary screw doesn't pull through the plank. When we worked on some planks we used deck screws to get the fit, they grabbed the structure underneath and held great, but the small head could go right through the wood. Once everything was in place, we drilled the holes for the silicone bronze screws, put them in then removed the temporary screw. 2.bp.blogspot.com/-1OpG41VCXao/V4_jMjBo8XI/AAAAAAAASgI/i-j49nPPmlAd4iBe9cht5Sxtv9P8PLjIACLcB/s400/IMG_1583.JPG
Home Improvement contractor here. I have never seen anyone use a electric plane for so many different things. Most people are somewhat scared of it and with good reason, but the screws you installed in the table are a stroke of genius. You can take off a very small amount of wood with the set up you have. I have learned tons of things watching you work. Thank you for sharing the wealth of knowledge you have.
The one other thing I wanted to mention that I learned from watching you work is how to effectively drive in a straight slot screw. I have a serious dislike for the straight slot screw, but the way you modify your bit, by removing some material in the center of the bit so the outside edges can make deep contact with the slot of the screw is simple and really effective. Makes me wonder why I didn't think of it myself.
Great video, being totally committed to a project doesn't mean you can't adjust the system of building to be more efficient, confident and safe. Be safe down in Chile my friend, they even beat California for earthquakes and volcanoes... Conception' is smack dabb in the middle of the "biggest ever" area. Looking forward to the series!
Any chance on a near future episode you could present (your method) on how to sharpen planing irons and wood chisels, I know there are a lot of vids out there but I would like to see how sharpening is done by a master....plus I don't have $800 dollars for one of those fancy European 10 inch wet wheel systems. Thanks for another great episode, dory is looking great.
Beautiful work and method just great you working the block plane to prep the piece to fit is an episode in itself. Your design is just great for me and appreciate you teaching me how it's done. Thank you Louis.
I will have to meet Louis one day. My favorite U tube channel. I have learned SO MUCH. Truly you know how its done.
this boat will last for ever!!
Oh yea! Been waiting. Love this build. Wish i could sharpen like you lou.
I love these videos. I build furniture, rather than boats, but I have learned a lot of great woodworking tips from you, thanks for making them.
Glad to see you guys again! Congratulations on your upcoming trip to Chile! I'm excited to see videos from your adventures there!
Wow, the Chile trip sounds exciting, so glad you’re bringing us along. If it’s not too much hassle, another 360 video would be great, but only if you’re in the right venue. Good luck on the trip, hope you have a great time.
Your attention to detail is amazing. She is looking great. I'm impressed with your teaching skill as well.
Thanks for the update and the changes you'll be making to the mold of the Sport Dory. You're there and your talents lets you know what to do to correct the struggles you're encountering. Just another thing that you're showing because your talents/skills says, "fix the problem".
….13
Well, if you are struggling, your professionalism isn't letting it show. Love the gentle swooping slopes of the boat.
Thanks for the honesty, Lou, about the construction. I did believe you were somewhat at a loss on how to proceed about 2 episodes ago. Just like all masters, you have given it thought and will come up with a master piece. You are the man!
Boat looks great! Quick question-are you going to reinforce the stem with carbon fibre? I don't think it's necessary but it may add some flair!
Excellently done! You did good also Lou...………...lol Thanks for posting
Just awesome videos! Have watched the series and may give it a go and try to build one beginning in the next 6 months. Great job again!!
Great video. The video production has improved with the fast forwarding of the tedious repetitive tasks while you talk over it at normal speed. Makes the video a lot more interesting to view. Keep up the good work.
Similar Lat. & Long. but different coast & Hemisphere
Another brilliant video. I love how you share tips with us, Lou. And it's a mark of intelligence to realise that a system can and should be refined. Can't wait to see the upcoming videos!
You are a great instructor!
Thanks Lou great video as always looking forward your travels abroad will be very interesting
Amazing keep up the excellent work absolutely love these videos!
I love it when a new TFASW video get sposted. Such a great channel!
Is polysorbide a soft and spongy sealant. Like what s used between bridge abutments and the bridge itself. That has a reasonable amount of thickness?
Looking forward to being a part of your opportunity down south, wouldn't miss it for the world Lou.
Love the show always looking for the new post. Thank you! Can you explain the fastener with what appears to be a washer on it?
Thank you for another great video! I'm looking forward to tagging along with you on your adventures.
Safe travels Lou!
Well explained I love it
Slotted screws?! I've never seen anyone ever use a slot drive screw voluntarily. Why?
Class
I am not a boatbuilder. But, I have heard of two reasons: 1) It is the traditional head used on boat building. 2) When repairing wooden boats, it is very easy to clean bedding, paint, etc. out of a slotted screw in order to then remove it.
Yeah, I've seen slotted screws so embedded , once you've got the groove cleared for the driver, they chip the wood coming out ( I am doing repair work on a house built in 1949). Phillips and Posi just don't want to clear out, and then tend to strip. I use a lot of torx/star drive screws, and they seem even harder to clear out if anything is plugging them, though I have had a few snap the heads off trying to take them back out, they tend to be smaller gauge than "wood" screws.
BRASS is soft so a large screw would strip under torque with any other drive type :i
What else would you use that can be removed in 100 years? Never had any issues with slotted screws if you use a screwdriver that isn't looking like something that was used a chisel.
How about a little saddle on the frame clamp pad, just enough dado to keep that side from going awry?
Great stuff Louis!
Thank you for the Videos Louis , Time so very well spent.
Excellent. Looking forward to your travel videos too.
Para su viaje a Chile - Que te vaya bien. (Means have a good trip to Chile)...
Nice Work! Perfect.
Great videos!
The editing, as always, is very impressive. Great work!
Why this type of screw, rather than a Phillips or square drive? Are these screws brass? Thank you for the videos.
Clayton Parks he addresses this in the first season. I think he said they are easier to take out when doing repairs and you can't strip them out. I believe they are brass as well.
Square drive ftw
Square drive (and torx) can be very hard to clean paint and caulk out of down the road. Slotted screws can still take a lot of torque, clean easily, and don't require the bit pressure that phillips does. Watch someone removing 50 year old planks and you'll see why.
torx yes but square can be easily cleaned out by a scratch awl. it also depends on what you're doing. in my case, i'm going through thousands of screws on large fishing vessels. It saves a lot of time when the screw stays stuck to the square drive bit.
I believe they are silicone bronze.
I hope to someday find something I can be as dedicated to and passionate about.
good to see you again my friend, I can see it's been a little tricky +1
You know you are listening to a true old salt when he says "Bow of the planer"
Louis' tips on tool use are a goldmine for any woodworker .
love your videos! I always look forward to the next episode
Hi Lou, yet another great video, cant wait for the next episode
You could write a book with all the tricks and tips given in these videos
Thanks Guy's the highlight of my week!
More than a Pro
You're a bonafide youtube celebrity Lou!
I like the variations in the cinematography
where s joe?
A good use of social media for sure. Thank you.
You are very good at communicating and teaching!
Great news guys!!! All the way to South America, how excited you guys must be!! Don't drink the water!! And make sure the ice cubes come from purified water also, I made that mistake down there wasn't to bad but it definitely messed me up, one other thing not sure if Lou has mentioned this before, the block plane he uses is that a low angle plane?
Also don't eat a salad washed in local water, or drink orange juice with added local water.
Top Job!
Well done Lou. great camera work.
Board stretcher....lol. nice job
Dry screws? Must be the plastic
I can't wait for the next video.
You should have your own tv show this old boat thankyou for all you teach everyone of us!
He already has his own show...
"...the bow of the plane." Love it!
great to see back Lou!
Over designed? Nonsense.
It’s a pleasure to watch skilled hands at work. Can you explain the screw with washer on first pattern station forward inline with first row of screws. Is it a temporary clamping screw? Waiting for the bell to ring next week.
Simply the BEST !
Have fun in Chile.
Another great video!