F-150 Steering Squeak - Pitman Arm Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ต.ค. 2023
  • Here is a pitman arm replacement on a 1997 F-150 4x4. The pitman arm removal tool initially would not budge the stuck arm. After lots of persuasion, eventually the puller was able to do the trick albeit at an angle. Thanks for watching DWG!
  • ยานยนต์และพาหนะ

ความคิดเห็น • 13

  • @rangerddanger697
    @rangerddanger697 5 หลายเดือนก่อน +1

    My 03 F-150 made the same sound it was my idler arm replaced it with a mooge with grease fittings no more squeak 👍

    • @DoWittGarage
      @DoWittGarage  5 หลายเดือนก่อน

      Grease fittings are the way to go. Good work 🤙🏻

  • @Shyyy444
    @Shyyy444 6 หลายเดือนก่อน +1

    I have a oil leak in my 2008 g35x assuming the cover valve gasket if I said that right so I’d love to watch you do that !!

    • @DoWittGarage
      @DoWittGarage  6 หลายเดือนก่อน

      That’ll be coming in the next month or so. Stay tuned!

  • @hemicudah
    @hemicudah 7 หลายเดือนก่อน

    Why not just take the 3 bolts holding the gearbox off to slightly turn the gearbox to install pitman arm puller?
    Saves a lot of time and energy

    • @DoWittGarage
      @DoWittGarage  7 หลายเดือนก่อน

      That's not how I've seen it done before, but may well work. Thanks for watching.

  • @fsb_-bf3th
    @fsb_-bf3th 8 หลายเดือนก่อน

    Watching that 8:40 segment makes me so thankful for ratcheting wrenches.

    • @DoWittGarage
      @DoWittGarage  7 หลายเดือนก่อน

      No kidding! Too bad I don’t have one that’s 1 5/16”. Thanks for watching!

  • @Breadmansgarage
    @Breadmansgarage 7 หลายเดือนก่อน

    Pb blaster?

    • @DoWittGarage
      @DoWittGarage  7 หลายเดือนก่อน

      Absolutely recommended. Thanks for watching.

    • @MrMadbrowncow
      @MrMadbrowncow 5 หลายเดือนก่อน

      Good for me when doin dishes, saves on water.

  • @gregulature
    @gregulature 7 หลายเดือนก่อน

    I really didn't think the pitman puller would work...I tried prying and broke the lid of the steering box :( got fluid everywhere. Warning, use the pitman puller! Nice work, what a b*****!

    • @DoWittGarage
      @DoWittGarage  7 หลายเดือนก่อน

      Sorry to hear that. I couldn’t get the pitman puller to work originally. Once the other “techniques” were exhausted I went back and made it work. Cutting through the arm was the ticket. Not a fun job, took a lot of patience! Thanks for watching DWG.